This was derived from
else if (c1 == "" && n2) return true; // true implies c1 < n2
However, this has no effect since Word always looses out against Number
anyways and the `pre` rules are also unaffected by this change – since
this only affects comparison of an empty Word part with a Number.
Change-Id: Ia04e42ac726352b688c87674b0fdb355f06edbcb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6722
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This asserts the not-quite lexicographical property of the comparison.
Change-Id: Iad68081e4b3a7106513f479643de87065dc47739
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6721
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is necessary because builtins.compareVersions compares versions in
a subtly not-quite-but-still-lexicographical way: `pre` for example can
have an effect if it is post-fixed: `2.3 < 2.3pre`. This is a violation
of the rule that in a lexicographical ordering, the longer string is
considered greater if they are otherwise equal. builtins.compareVersion
is comparing lexicographically though, if you do the following
transformation beforehand:
2.3 --split--> [ "2" "3" ] --append--> [ "2" "3" "" ]
2.3pre --split--> [ "2" "3" "pre" ] --append--> [ "2" "3" "pre" "" ]
Comparing the transformed version is then done lexicographically:
2.3 < 2.3.0pre since [ "2" "3" "" ] < [ "2" "3" "0" "pre" ]
Here, the `pre` rule never comes into effect because no comparison on it
happens, instead we use the longer string rule of a lexicographical
comparison.
In the C++ codebase, the reason for this behavior is that the
iterator-esque construct they use always yields the empty string before
it exposes it has been fully consumed. This is probably intentional to
support the postfixed `pre` which is, for example, used by NixOS
versions (e.g. unstable post 22.05 is 22.11-pre). We replicate this
behavior using the `Chain` iterator in `VersionPartsIter::new_for_cmp`.
Change-Id: I021c69aa27b0b7deb949dffe50ed18b6de3a7b1f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6720
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is based on the [relevant code] in C++ Nix. Our version has more
branches because the C++ one only checks if it is less than or not, so
can save handling a few cases. We on the other hand, can avoid calling
the algorithm twice. It'd be nice to implement proptests for this in the
future and to make sure that this weird little algorithm doesn't violate
the Ord laws.
[relevant code]: cd35bbbeef/src/libstore/names.cc (L81-L94)
Change-Id: I46642e6da5eac7c0883cdce860622cdba04cd12b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6719
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This was fairly easy, thanks to the work already done by Thomas Frank.
However, the implementation is suboptimal because we parse number parts
only to convert them back to strings afterwards. I've chosen to tackle
this problem in the future, since having an (inefficient) implementation
of splitVersion will be helpful for debugging the slight discrepancies
between C++ Nix and Tvix in the case of compareVersions.
Change-Id: Id6ed8eeb77663ff650c8c53ea952875b1fb7ea84
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6688
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This makes it possible to call a callable value (builtin or
closure/lambda) directly, without unwrapping it first. This is needed
for pretty much all higher-order functions to work correctly.
This is mostly equivalent to the previous code in coerce_to_string for
calling `__toString`, except it expects the argument(s) to already be
placed on the stack.
Note that the span for the `NotCallable` error is not currently
guaranteed to make any sense, will experiment with this.
Change-Id: I821224368d438a28900858b343defc1817e46a0a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6717
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Generate smaller recursive values for generated Values, and run fewer
cases for the attrs proptests which are particularly egregious.
Change-Id: Ia35c7c120270feaf045be1deb440c87ebb185c27
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6716
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As we already have a VM passed to the builtins, we can simply execute
the provided closure/lambda in it for each value.
The primary annoyance with this is that we have to clone the upvalues
for each element, but we can try making this cheaper in the
future (it's also a general problem in the VM itself).
Change-Id: I5bcf56d58c509c0eb081e7cf52f6093216451ce4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6714
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Previously we only matched the outer constructor after forcing which
would mean that we would always return `false` if the inspected value
was a thunk, regardless what value would be present inside.
Change-Id: I361ea6e855e23ef8e5b59098a50b9cd59253803f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6692
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Previously, this would almost always crash because list items are
thunked more often nowadays and selecting from a thunk would fail. Also
we no longer pop from args, accessing it by index should avoid an
unnecessary clone here.
Change-Id: I4410c4c2e28cc255a2c7cf2a5322db3d2c556a0e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6693
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
And insert the missing newline the C++ Nix test script needs.
Change-Id: I04ddd7268f9caa1414fd23314c281bb7c1e854cf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6689
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Instead of arity, we pass a array reference to Builtin::new that
describes how many arguments there are and which of them need to be
forced, eliminating the need to force manually.
Note that this change doesn't fix some of the instances where the the
Builtin doesn't consider that the value could be a Thunk.
Change-Id: Iadb58bb79886c30dc6b09dcf0ffad8abf28036a1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6662
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
TL;DR:
- support `builtins.tail`
- define `ErrorKind::TailEmptyList` and canonical error code
- support basic unit tests
Unsure whether or not the error should be a dedicated `ErrorKind`...
Change-Id: Iae90fda1bb21ce7bdb1aaa2aeb2b8c1e6dcb0f05
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6545
Reviewed-by: wpcarro <wpcarro@gmail.com>
Autosubmit: wpcarro <wpcarro@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Refactor the `force!` macro to a method on `Value` which returns a
smart-pointer-esque type, which simplifies the callsite and eliminates
rightward drift, especially for high-arity builtins.
Change-Id: I97a7837580accfb4bbd03b24f2acdbd38645efa5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6656
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Previously only the first one was guaranteed to be forced, but we need
to do this for all of them.
Fixes b/190
Change-Id: I76b5667dbfb2f3fde3587e7b91d268cbf32aca00
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6645
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Document the OpAttrs op, paying special attention to the (perhaps
confusing) behavior of taking the number of *pairs*, not the number
of *values*, which will be popped off the stack into the resulting attr
set.
Change-Id: I64df0290308ecae7a5c7e14ead37091d32701507
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6654
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Refactor the environment variable and argument parsing for the tvix repl
to use Clap instead of doing things ad-hoc, and thread through options
obtained from environment variables via explicit arguments rather than
obtaining them from the environment as they're needed. This makes adding
more flags more sustainable, and also makes the binary fully
self-documenting, including supported env vars, via `--help`.
Change-Id: Ib1f6a0cd20056e8c9196760ff755fa5729667760
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6653
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Thunks might be encountered deep in equality comparison (eg nested
inside a list or attr-set), at which point we need to force them in
order to compare them for equality (or else we panic when trying to get
at their value).
Fixes: b/192
Change-Id: I912151085f8298f30d5214c7965251c9266443f2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6652
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Pass in, but ignore, a mutable reference to the VM to the `nix_eq`
functions, in preparation for using that VM to force thunks during
comparison.
Change-Id: I565435d8dfb33768f930fdb5a6b0fb1365d7e161
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6651
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Using rust's PartialEq trait to implement Nix equality semantics is
reasonably fraught with peril, both because the actual laws are
different than what nix expects, and (more importantly) because certain
things actually require extra context to compare for equality (for
example, thunks need to be forced). This converts the manual PartialEq
impl for Value (and all its descendants) to a *derived* PartialEq
impl (which requires a lot of extra PartialEq derives on miscellanious
other types within the codebase), and converts the previous
nix-semantics equality comparison into a new `nix_eq` method. This
returns an EvalResult, even though it can't currently return an error,
to allow it to fail when eg forcing thunks (which it will do soon).
Since the PartialEq impls for Value and NixAttrs are now quite boring,
this converts the generated proptests for those into handwritten ones
that cover `nix_eq` instead
Change-Id: If3da7171f88c22eda5b7a60030d8b00c3b76f672
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6650
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This disconnects ownership of the `File` reference in a compiler from
the calling scope, which is required for when we implement `import`.
`import` will need to carry an `Rc<RefCell<CodeMap>>` (or maybe, in
the future, Arc) to give us the ability to add new detected code
files at runtime.
Note that the choice of `Arc` over `Rc` here is not ours - it's the
codemap crate's.
Change-Id: I3aeca4ffc167acbd1701846a332d93550b56ba7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6630
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
As before, this limits the cases to a relatively small number because
otherwise things get quite large.
Change-Id: I5371dc56418fca52e1dd1d905b20868f647091ba
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6649
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Only running 20 cases for now, since Value can get quite big if you let
it run for a while.
Change-Id: I09ef19da22c789c4869793836c98937c44595340
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6648
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
this was found by proptests!
Change-Id: I16d6a6ece3b20cdddd6f78c94cc87befb1b651e6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6647
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Add an optional config argument to the `<trait>_laws` macros, to allow
configuring the generated tests with a ProptestConfig struct (to limit
the number of cases run)
Change-Id: I2143ddb72c6a870e8be4a9058135b6f9a703039e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6646
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Impl Arbitrary for Value (and NixAttrs and NixList) in the same way we
did for NixString. Value currently only generates non-"internal"
values (no thunks, AttrNotFound, etc.) and can't generate
functions (builtins or closures), because those'd require full
generation of tvix bytecode, which is a bit more work than I'd like to
do now - there's a `todo!` left in the code for a place where we could
allow opting-in to internal values and functions later.
Change-Id: I07a59e2b1d89cfaa912d4ecebd642caf4ddb040a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6627
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is pretty boring at the moment, but mostly serves as a foot in the
door in the direction of writing more tests
Change-Id: Id88eb4ec7e53ebb2d5b5c254c8f45ff750238811
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6637
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Invalid integers (eg integers that're too long) end up as error returns
on the `.value()` returned from the literal in the AST - previously we'd
unwrap this error, causing it to panic the compiler, but now we've got a
nice error variant for it (which just unwraps the underlying
std::num::ParseIntError).
Change-Id: I50c3c5ba89407d86659e20d8991b9658415f39a0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6635
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Add a suite of proptests covering the laws of the handwritten stdlib
trait impls (Eq, Ord, and Hash) for String, generated from a new set of
macros for generating those tests which can be applied to other types.
Change-Id: Ib3276c9e96fca497aece094e5612707d3dc77ccd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6626
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The From<String> impl for NixString only generates StringRepr::Heap
strings, but we want to make sure we're testing StringRepr::Smol too
Change-Id: I6d04b9cf12ef8462fe2788e0c6414b165f40311d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6629
Autosubmit: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This matches the name of the AST node from which it was compiled.
Suggested by sterni in cl/6231
Change-Id: Ia51525158d2f47467c01fce2282005b1a8417a47
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6623
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
