These methods make it possible to trace the runtime execution of the
VM through an observer.
Change-Id: I90e26853ba2fe44748613e7f761ed5c1c5fc9ff7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6452
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These are required for tvixbolt to work. This interface is definitely
not stable yet, though.
Change-Id: I4076498e8f42311de74ee4f33c93a3ee0c5f8d3a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6450
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This type implements an observer that is called whenever the compiler
emits a chunk (after the toplevel, thunks, or lambdas) and prints the
output of the disassembler to its internal writer.
This replaces half of the uses of the `disassembler` feature, which
has been removed from the Cargo configuration.
Note that at this commit runtime tracing is not yet implemented as an
observer.
Change-Id: I7894ca1ba445761aba4ad51d98e4a7b6445f1aea
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6449
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This trait will enable library users of tvix-eval to observe internal
happenings of the compilation and runtime processes.
The initial methods of the observer will be called whenever the
compiler emits a chunk.
Change-Id: I668f6c2cfe3d6f4c1a1612c0f293831011768437
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6448
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is a step towards hiding the internal fields of thunk, and making
the interface of the type more predictable.
Part of the preparation for implementing observers.
Change-Id: I1a88a96419c72eb9e2332b56a2dd94afa47e6f88
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6447
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this change, it becomes possible to compile tvix-eval to
webassembly if the `repl` feature is disabled.
Change-Id: Icc0a059964cd0bea2054110c682d50fc5c87ec01
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6446
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
With this, most cases of `fix` in attribute sets will work correctly.
A simple test exercising both has been added.
Change-Id: I70fd431177bb6e48ecb33a87518b050c4c3d1c09
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6437
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
At the point where control flow exits Thunk::force (which may be due
to recursing), it is vital that there is no longer a borrow to the
inner thunk representation, otherwise this can cause accidental
infinite recursion (which will be detected, but cause failures on
valid code).
Change-Id: I2846f3142830ae3110a4f5d2299e9d7928634504
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6436
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it easier to track exactly which lambda is which when
inspecting e.g. the concrete representation of a thunk.
At runtime all lambdas live in an Rc. To make this print the right
address, the construction of these Rcs had to be moved up right to the
point where the lambda is first emitted (and disassembled).
Change-Id: I6070e6c8ac55f0bd697966c4e7c5565c20d19106
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6435
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
There can be different spans on the same line, so the previous
implementation would duplicate line numbers unnecessarily.
Change-Id: I8d8db77177aee0d834a6ec3584641e1bd5f31c3e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6434
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This was fixed by some of the previous commits around scopes. It's
somewhat similar to a few other tests, but I had this one failing
earlier and everything else succeeding, so it is useful to keep it
around for sure.
Change-Id: Ie6cf372b5c805daf992cd87aeb3dfe91542c381c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6431
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Deferred local upvalues can *only* occur at the same depth as the
thing that is closing over them, but there are various situations with
scope nesting where the actual stack indexes of the local and the
closer look like a deferred value is being accessed.
To fix this, simply compare the depth as well.
Change-Id: Ice77424cc87ab0a2c4f01379e68d4399a917b12b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6429
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This is the same as `eval-okay-attrs-simple-inherit`.
Change-Id: I23878accc6cd62c16ec96601239838a385d31306
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6428
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The condition here was extremely hard to read prior to this change.
As the locals vector is now guaranteed to never be empty (there is
always at least a phantom for the current chunk's root expression),
the logic here can be simplified to just dropping tailing locals
entries while their depth matches that of the scope being closed.
Change-Id: I24973e23bc2ad25e62ece64ab4d8624e6e274c16
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6427
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Similar to setting up a phantom slot when compiling the root value of
a file, closures and thunks need to have a phantom stack slot for the
root of the expression yielded by their thunk to make all accounting
work correctly.
The tricky thing here is that closures & thunks *escape* their inner
lambda context (that's the point!), so the functions emitting them
need to know both the *inner* slot (to resolve everything correctly
while compiling the slot) and the *outer* slot (to correctly emit
instructions for closing over upvalues).
Change-Id: I62ac58e2f639c4b9e09cc702bdbfd2373e985d7f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6426
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Instead of using a sentinel LocalIdx which potentially points to a
value in the locals stack that does not actually exist, set up an
initial uninitialised phantom value representing the result of the
root expression.
Change-Id: I82ea774daab83168020a3850bed57d35ab25c7df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6424
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
When deciding whether an upvalue needs to have a deferred resolution
step, the *stack* indexes should be compared - not the locals indexes.
The results are almost always the same, but there are tricky
situations where this can cause errors.
It's difficult to reproduce these errors in isolation, as they depend
on other scope behaviour, so this is one in a series of commits to
address the combination of issues which will gain some tests at the
end.
Change-Id: Iaa400b8d9500af58f493ab10e4f95022f3b5dd21
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6423
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Instead of using sentinel values and an additional bool, this tracks
the identifier of a local as an enum that is either a statically known
name, or a phantom.
To make this work correctly some more locals related logic has been
encapsulated in the `scope` module, which is a good thing (that's the
goal).
Phantom values are now not initialised by default, but the only
current call site of phantoms (`with` expression compilation) performs
the initialisation right away.
This commit changes no actual functionality right now, but paves the
way for fixing an issue related to `let` bodies.
Change-Id: I679f93a59a4daeacfe40f4012263cfb7bc05034e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6421
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The slot is now always known (at the root of the file it is simply
stack slot 0 once the scope drops back down to 0), so it does not need
to be wrapped in an `Option` and accessed in cumbersome ways anymore.
Change-Id: I46bf67a4cf5cb96e4874dffd0e3fb07c551d44f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6420
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this change the runtime trace contains much more exact
information about the context of the computation (entering/exiting
calls etc.)
This is in large part due to moving the tracer to be a field on the VM
itself, which enables consistent ordering of traces across the
execution, and tracing an execution with its *input* instead
of *output* stack.
Change-Id: Ibe525e6e7d869756501e52bef1a441619ce7332c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6419
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it much easier to figure out what happened while debugging
this sort of thing.
Change-Id: I2e0e8096709adc647d63c04f213c547c415e5f44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6418
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This could occur when the disassembler is enabled and tracing the
runtime while a thunk is being evaluated, as it would not be possible
for the *tracer* to borrow the thunk at this exact moment.
However, we know that if the borrowing fails here we are dealing with
a not-fully evaluated thunk (blackhole), which should just print the
internal representation.
Change-Id: I4bdb4f17818d55795368e3d28842048f488f0a91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6416
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Previously, "calling" (setting up the VM run loop for executing a call
frame) and "running" (running this loop to completion) were separate
operations.
This was basically an attempt to avoid nesting `VM::run` invocations.
However, doing things this way introduced some tricky bugs for exiting
out of the call frames of thunks vs. builtins & closures.
For now, we unify the two operations and always return the value to
the caller directly. For now this makes calls a little less effective,
but it gives us a chance to nail down some other strange behaviours
and then re-optimise this afterwards.
To make sure we tackle this again further down I've added it to the
list of known possible optimisations.
Change-Id: I96828ab6a628136e0bac1bf03555faa4e6b74ece
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6415
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
If the disassembler feature is enabled, make sure that an Rc of the
codemap is available through the chunk.
Change-Id: I700f27ab665a704f73457b19bd2d7efc93828a16
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6414
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The casting methods of `Value` are pretty verbose, and actually
incorrect before this commit as they did not account for inner thunk
values.
To address this, we first attempt to make them correct by introducing
a standard macro to generate them and traverse the inner thunk(s) if
necessary.
This is likely to be a performance hit as it will now involve more
cloning of values. We can do multiple things to alleviate this, but
should do some measurements first.
Change-Id: If315d6e2afe7b69db727df535bc6cbfb89a691aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6412
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This makes it possible for builtins to force values on their own,
without the VM having to apply a strictness mask to the arguments
first.
Change-Id: Ib49a94e56ca2a8d515c39647381ab55a727766e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6411
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Scope poisoning must be inherited across lambda context boundaries,
e.g. if an outer scope has a poisoned `null`, any lambdas defined on
the same level must reference that poisoned identifier correctly.
Change-Id: I1aac64e1c048a6f3bacadb6d78ed295fa439e8b4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6410
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this, if an error occurs while forcing a thunk (which is very
likely) it is threaded through to the top by wrapping it in the
ErrorKind::ThunkForce variant.
We could use this to generate "stacktrace-like" error output if we
wanted, or simply jump through and discard everything except the
innermost error.
Change-Id: I3c1c8708c2f73ae062815adf490ce935b1979da8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6409
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Previously error spans were optional because the information about
code spans was not available at runtime. Now that this information has
been added, the error type will always carry a span.
This change is very invasive all throughout the codebase. This is due
to the fact that many functions that are called *by* the VM expected
to return `EvalResult`, but this no longer works as the span
information is not available to those functions - only to the VM
itself.
To work around this the majority of these functions have been changed
to return `Result<T, ErrorKind>` instead and an accompanying macro in
the VM constructs the "real" error.
Note that this implementatino currently has a bug where errors
occuring within thunks will yield the location at which the thunk was
forced, not the location at which the error occured within the code.
This will be fixed soon, but the commit is large enough as is.
Change-Id: Ib1ecb81a4d09d464a95ea7ea9e589f3bd08d5202
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6408
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Get the length of a list
Change-Id: I41d91e96d833269541a1b3c23b7cc879f96d1e5a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6407
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
First pass at supporting `builtins` for tvix. The following tests appear to be
WAI:
```shell
$ cd tvix/eval
$ cargo build
$ cargo test
```
Change-Id: I27cce23d503b17a886d1109e285e8b4be4264977
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6405
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Another step towards being able to report accurate errors. The codemap
spans contain strictly more accessible information, as they now retain
information about which input file something came from.
This required some shuffling around in the compiler to thread all the
right information to the right places.
Change-Id: I18ccfb20f07b0c33e1c4f51ca00cd09f7b2d19c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6404
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
As of this commit, the source spans of all emitted bytecode are fully
tracked.
Change-Id: I4c83deee0fc3f5e6fd6acad5a39047aec693b388
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6403
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These source spans will always point to the *value* that is being
forced, not the instruction that caused the force to be emitted. This
makes sense so that errors during forcing point at the value and not
the surrounding expression.
Change-Id: I4694414a3281a0de878f71634105b92148ec61f6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6402
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
With this change, the upvalue data instructions used by finalisers for
thunks and closures track the source span of the first identifier that
created the upvalue (if the same value is closed over multiple times
the upvalue will be reused, hence only the first one).
To do this the upvalue struct used by the compiler's scope now carries
an identifier node, which had to be threaded through quite a few
places.
Change-Id: I15a5fcb4c8abbd48544a2325f297a5ad14ec06ae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6400
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This separation makes it possible to annotate the upvalue itself with
the span that created it, which (due to upvalue reuse) is only the
first one for an instance of the given UpvalueKind.
Change-Id: I9a991da6a3e8d71a92f981314bed900bcf434d44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6399
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
These are again a bit tricky in terms of emitted errors. The main
error is that the condition is not a boolean, which means that the
jump inspecting the condition must derive from the condition itself to
return an error at the correct position.
For other parts of the expression, it is simply the node itself.
Change-Id: I72411630e5d57dfc199f4c3c48afe443fe966322
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6392
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This one is tricky, specifically the span used for the final jump. I
decided that it makes sense to use the attrpath node, as the final
jump is the one that jumps *over* the default value, so the effect of
this is more closely related to the selector than the default.
It might be more correct to pass through the `or` token itself and
point to this for the jumps, but it depends a bit on what shape of
errors we could end up producing from this.
Change-Id: I29fbc97ba6b9e14e1a0e5f3a7759ddc299dd9c0c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6390
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
These are not actually used yet; this is in preparation for a
multi-commit chain for emitting all the right spans in the right
locations.
Change-Id: Ie99d6add2696c1cc0acb9ab928917a10237159de
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6379
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This instantiates a codemap outside of the compiler and passes a
reference to the file currently under compilation to it. Note that the
"file" might just be a REPL line.
Change-Id: I131ae1ddb6d718e1374750da9ba0b99608c6058d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6378
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is currently just a wrapper around Chunk::push_op, but will gain
the span resolution logic in a moment.
Change-Id: I862bf9ecff0932f8da6708401ea044b9442c5d5b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6377
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This adds a new vector to the chunk data structure which tracks spans
into a codemap. The compiler will emit this information to the chunk
when adding instructions.
The internal representation of the spans is slightly optimised to
avoid storing duplicate spans, as there are cases where many
instructions might be derived from the same span.
Change-Id: I336f8c912e7eb50ea02ed71e6164f651ca3ca790
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6376
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Updated the rnix hash manually, and ran `cargo update` for the rest.
Change-Id: I457262625d648e25d745efa4d33ae44cb8f21326
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6375
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This will be used to track source spans when emitting bytecode.
The codemap is a data structure which tracks *all* the source files
visited by an evaluation, and makes it possible to represent locations
across all of the files using a simple span (i.e. pair of offsets).
When reporting errors, this even contains enough information to
reconstruct the rnix AST to create fancier reporting in certain cases
if desired.
Change-Id: I4ae98620b9b150fb5a389bd7f1e12670e3192c62
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6374
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Note that I've allowed `needless_lifetimes` for the attribute set
iterator, as I find the type easier to understand with these
annotations present.
Change-Id: I33abb17837ee4813076cdb9a87f54bac4a37044e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6373
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This essentially makes the VM behave like `nix-instantiate --eval
--strict`, i.e. data structures are traversed strictly and thunks are
forced. Thunks embedded in closures are not forced.
This allows us to re-enable tests that were disabled because they
needed to output nested thunk contents, but is overall a behaviour
that must be configurable later on, as it is not cmopatible with e.g.
an evaluation of nixpkgs.
Change-Id: I5303a5c8e4322feab1384fdb7712fecb950afca5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6372
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This does not require a custom iterator type (for now?)
Change-Id: I5beb194bd8629571bd4040c69c977c27149807fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6371
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
If a thunk is already evaluated, there are cases where due to the
memoisation implementation something might observe a value wrapped in
a thunk.
In these cases, the implementation of `Display` and `PartialEq` must
delegate to the underlying value.
Note that there are a handful of other cases like these which we need
to cover.
It is a little tricky to write integration tests for these directly,
especially as some of the open-upvalue optimisations coming down the
pipe will reduce the number of observable thunks.
One test that covers a part of this behaviour is currently
disabled (needs some more machinery), but it's being brought back in
the next commits.
Change-Id: Iaa8cd338c12236af844bbc99d8cec2205f0d0095
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6370
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Implementing iteration over NixAttrs requires a custom iterator type
in order to encapsulate the different representations. The BTreeMap
for example has its own iterator type which needs to be encapsulated.
This is mostly boilerplate code, but for a change some simple unit
tests have been added in.
Change-Id: Ie13b063241d461b810876f95f53878388e918ef2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6367
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
These static strings show up a bunch when dealing with the internals
of attribute sets, and having them available as static references is
required.
Due to the way const expressions are evaluated, taking a reference to
the existing NixString::NAME / NixString::VALUE items does not work
and the references themselves need to be const-evaluated.
Change-Id: If6e75847af978118a3b266fe6a3242321722434d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6366
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The VM previously took care of repeatedly forcing a thunk until it
reached an evaluated state. This logic is now encapsulated inside of
the `Thunk::force` implementation.
In addition, force no longer returns a reference to the value by
default, leaving it up to callers to decide whether they want to
borrow the value or not (a helper is provided for this).
Change-Id: I2aa7da922058ad1c57fbf8bfc7785aab7971c02b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6365
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This thunks the construction of attribute sets. Because Tvix does not
currently have a "strict output" mode, a test had to be disabled that
now displays a thunk representation.
The test will be re-enabled once that is available.
Change-Id: I360332be64cd5c154f9caea21828f6f1b37a265c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6363
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This lets us create a release build with debug info, for use with e.g.
perf + hotspot
Change-Id: I03897de36c872d318abf1332ca0c1aeabe344ec6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6362
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
As noticed by sterni in cl/6195
Change-Id: Ie9c1e80e2e709284fa8412334af9188d999f64dc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6361
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This should not have grown a second implementation of the identifier
resolution logic, but it somehow did.
This implementation ended up being incorrect because it did not
account for upvalues inside of thunks.
Change-Id: Ieb1364d8fe43c96aaf4b125fd4b8a522aedff167
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6360
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
All attribute set *key* related operations strictly evaluate all key
fragments, including during construction of an attribute set.
Change-Id: I3519e5e9b0886c2cdc8615ea7dcb5f7be0c59b3f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6358
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The arguments of all unary/binary operators that are built in to Nix
are forced when encountered. This emits the necessary OpForce operations.
Change-Id: I691fcdbebfe7586cfe217c68d44b10b1192f82d1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6357
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
With this change any compilation of an expression is aware of its own
stack slot if it is leaving identifiers on the stack.
Change-Id: I0c9f148ae06b078a46b25180c4961686d5f2e166
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6356
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This threads the current local slot through the `compile_attr`
function and all of its callers. At the moment this does not improve
any user-facing behaviour, just internally changes the way in which
some correct expressions would fail to run.
Eventually this slot will need to reach everywhere ...
Change-Id: Iba73123dd1ced421093d8fc18ebeeffc16efacf8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6355
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is the simplest kind of thunk that can be created (and so far the
only one the compiler knows how to create), in which an identifier
inside a `let` encounters a value that is bound *after* it is
initialised.
Change-Id: I6ea4408a3baef1e7d5137365d70804283f2dbf8e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6354
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This operation forces the evaluation of a thunk.
There is some potential here for making an implementation that avoids
some copies, but the thunk machinery is tricky to get right so the
first priority is to make sure it is correct by keeping the
implementation simple.
Change-Id: Ib381455b02f42ded717faff63f55afed4c8fb7e3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6352
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The capacity (i.e. number of builtins) is known from the lambda, so we
can size it correctly right away.
Change-Id: Iab0b5a3f47d450fa9866c091ebbbed935b934907
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6351
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Implements an operation very similar to `OpClosure` which populates a
thunk's upvalues and leaves it on the stack.
Change-Id: I753b4dfeeaae6919316c7028ec361aaa13d87646
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6350
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This function is reusable between thunks & closures.
Change-Id: I44d5f9897b087a385c8e75027d2ff39c48a096f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6349
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
CallFrame has to work for both thunks & closures (as a thunk is
basically a "weird 0-argument closure").
We opt to store the common, relevant fields directly in the frame to
avoid having to dereference through the nested structures
constantly (which would be especially annoying in the case of thunks).
Change-Id: I47781597b84ec5cd55502dba1713e92cf2592af3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6348
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This trait abstracts over the commonalities of upvalue handling
between closures and thunks.
It allows the VM to simplify the code used for setting up upvalues,
without duplicating between the two different types.
Note that this does not yet refactor the VM code to optimally make use
of this.
Change-Id: If8de5181f26ae1fa00d554f1ae6ea473ee4b6070
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6347
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
For now, do not distinguish between closing and non-closing thunks, it
will make the initial implementation easier. See Knuth etc.
Change-Id: I0bd51e0f89f2c77e90bac63b507e5027b649e3d8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6346
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
When resolving a value on the same level that is known but not yet
defined, emit a thunk.
Consider for example:
let
# v--- requires a thunk
a = 1 * b;
b = 10;
in a
Change-Id: I922cb50973ebe05e335a7bc7cb851960cf34733b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6345
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
The logic in this method is *very* similar to `compile_lambda`. It is
intended to be called around any expression that should be
thunked (such as function applications, attribute set values, etc.).
Change-Id: Idfbb2daa9f4b735095378fb9c39a2fd07c8cff91
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6344
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Introduces the representation of runtime thunks, that is lazily
evaluated values. Their representation is very similar to closures.
Change-Id: I24d1ab7947c070ae72ca6260a7bbe6198bc8c7c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6343
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
