Introduces a helper function within tvix-tracing that returns a reqwest
tracing middleware that will ingest the traceparent if otlp is enabled.
It is feature flagged in tvix-tracing so not every consumer of that
library automatically has reqwest in its dependencies.
Tested using netcat to verify that the `traceparent` header is there if
otlp is enabled and missing if otlp feature is disabled.
Change-Id: I5abccae777b725f5ff7382e3686165383c477a39
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11886
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
See https://github.com/NixOS/nixpkgs/pull/323753 for details.
Changes:
* git: temporarily comment out dottime patch (it doesn't apply, but it's not critical)
* third-party/cgit: use an older git version where dottime patch still applies
* 3p/crate2nix: remove crate2nix patches included in latest release
* tvix: remove unneeded defaultCrateOverrides (upstreamed to nixpkgs)
* tvix: regenerate Cargo.nix
* tvix/nix-compat: remove unnused AtermWriteable::aterm_bytes pub(crate) function
* tvix/nix-compat: remove redundant trait bounds
* tvix/glue: use clone_into() to set drv.{builder,system}
* tools/crate2nix: apply workaround for https://github.com/numtide/treefmt/issues/327
* toold/depotfmt: expose treefmt config as passthru
* tools/crate2nix: undo some more hacks in the crate2nix-check drv
Change-Id: Ifbcedeb3e8f81b2f6ec1dbf10189bfa6dfd9c75c
Co-Authored-By: Florian Klink <flokli@flokli.de>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11907
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is allows adding a cache in front of tvix-store daemon, and is less
code duplication than cl/11902, means we can probably land that until we
have proper store composition config.
It can be used to provide a tvix-store daemon interface for a Nix HTTP
Binary cache, saving all calculated PathInfo to another PathInfoService
after ingestion.
Change-Id: If141d718c2635f66aa90d46a80fd79c86c07d9ff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11903
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This allows binding on unix sockets, as well as systemd socket
activation.
Change-Id: Icf648c4fd0895468c52607deb6397b8b5928102b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11901
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Using std::io::{Stdout,StdErr} directly will clobber the output by an
active progress bar. To resolve this issue the exposed writers should be
prefered over `println!` and `eprintln!`.
Change-Id: Ic79465cd4e8b9dad5a138f6b08c5f0de9dcf54a1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11860
Autosubmit: Simon Hauser <simon.hauser@helsinki-systems.de>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The aarch64-linux version of this is too big for cloud-hypervisor to
accept.
The correct place for this is in
`${kernel}/${stdenv.hostPlatform.linux-kernel.target}`, the other output
is only useful for debugging purposes.
This gets cloud-hypervisor to start booting up the kernel. It still
doesn't boot successfully, but it's getting further.
Part of b/407.
Change-Id: I3fbe52597fb1a6f5728a7f375dd35b50e00b3b1a
Co-Authored-By: Alyssa Ross <hi@alyssa.is>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11905
Tested-by: BuildkiteCI
Reviewed-by: Alyssa Ross <hi@alyssa.is>
Autosubmit: flokli <flokli@flokli.de>
This uses the `preStart` mechanism to boot up a minio instance, which
we point blob/directoryservice to.
Change-Id: I9e67b19006cb08ce82fe63c885cb0178e97389e1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11896
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We previously called ObjectStoreBlobService::parse_url, which passes an
empty list of options when constructing the ObjectStore.
This is most likely not what we want. The more reasonable thing to do is
pass along the query string (pairs) as options to
`object_store::parse_url_opts`, and remove them from the plain URL we
pass to object_store itself.
Change-Id: Ic2cb1dca2a2980a863165d81baa3323a355cf3fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11897
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Get rid of the `let grpc_client` and `let resp` in some cases.
Change-Id: Idc1c0f566a3b1b48da62e6f1977b07620656b16c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11884
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This uses the `preStart` mechanism to boot up a bigtable emulator, which
we point directory/pathinfoservice to.
Change-Id: Icb383403cb2d1f7e19c71b6298e82b391f9c8d22
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11895
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This allows running some code before tvix-daemon is started up, which is
helpful to spin up some mock services.
Change-Id: Ie7b6eaaf76c40def493f50879ee5255fd1ebd2fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11893
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
This is still useful to test the ingestion part of nar-bridge.
Reintroduce the logic removed in cl/11398, but put it behind a
`useNarBridge` parameter, defaulting to false.
Add an additional target to tvix.boot.tests,
`closure-nixos-nar-bridge`, which does the same as `closure-nixos`,
except seeding the contents through nar-bridge.
Change-Id: Iee87d5d9c7b7d02df11ee47fbc3f1fbe951935e9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11891
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
These fields don't need to be set if isClosure is false.
Change-Id: Id29ed034e0757c61cef09885962dfc5507ca106c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11890
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Otherwise these are not accessible after parsing if parsed from another
crate.
Change-Id: Iba7b442722a2eb1d37c2c496a45aa559aa49c1f5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11889
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows parsing files like `/etc/nix/nix.conf` into the `NixConfig`
struct.
Change-Id: I90b25f43c429dd56127500ff5068e83852adee13
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11888
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
We want to use this in another struct that we want to compare and clone.
Change-Id: I5c11d589a4922d85e190e1a9199468411016ff1e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11887
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
Tested-by: BuildkiteCI
A lot of this content needs to be duplicated from the monorepo’s root
directory. However, some of the content was not relevant or could have
been more condensed in descriptions or split up for consumption that
also matched the styles of some other library documentation I had been
looking at for examples. I wanted to add the new access to Admonish
callouts but also aimed at the readablitiy in one’s text editor for the
user that needs to `cat` the docs.
In the future, a “Introduction” page would be nice to add to “Welcome”,
but I don’t think that is as clear.
Change-Id: Ibfc169c5fc3501d7eeb9a76423c6f64cd68897aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11869
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
these just indicate the start of the prompt by convention & if the user
is root or not with `#` & `$` respectively
Change-Id: Id65f5f879b067ee96715b3e7dc63f68c7ad791b8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11868
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
NixString::iter_plain() didn't make much sense, especially without a docstring.
Rename it to iter_ctx_plain(), and copy the docstring from NixContext.
Do the same for the two other context element types too.
Change-Id: I1bbfcb967d8d9b14487d069bfe3a1f762253ef4d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11882
Tested-by: BuildkiteCI
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
Reviewed-by: flokli <flokli@flokli.de>
We currently only had a dummy implementation that didn't actually
persist the files in the store(s).
Copy the contents to the BlobService, and do the output path calculation
as part of the upload.
Use the plain context elements to construct the references.
Change-Id: Ibdaf7a645ddc31e847faa4b87a79f2f95116a7ab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11879
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
See discussion in cl/11869. Let's use `#` consistently, we also use `##`
for deeper nested subheadings.
Change-Id: Ie25ebda708639fb617d456c275ae5a264fc4ce85
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11881
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: toastal <toastal@posteo.net>
Add some eval-fail-fetcht-*.nix test cases.
Change-Id: Ic02beabf120d1de8df6f9c098d5a074127069f81
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11880
Tested-by: BuildkiteCI
Reviewed-by: Simon Hauser <simon.hauser@helsinki-systems.de>
In case the otlp feature is not enabled, these generate warnings during
`cargo check`.
Fix by moving some imports into their functions, or using the
fully-qualified name (and one #[allow(unused_mut)])
Change-Id: I5afd89dcd4c772b6002cebdd5d0469932eacfdac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11873
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Reviewed-by: Simon Hauser <simon.hauser@helsinki-systems.de>
There's other places where unexpected arguments can be provided, like
in builtins.
Make space for that error type.
Change-Id: Ic831497a3a1dd36a3a184bedadcf1374bf0ae6db
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11876
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
The only two consumers (fetchurl, fetchtarball) of these do try to parse
it as URL, so do it in the helper.
Update url_basename to take a &url::URL, not a &str.
Also update the test to use rstest for the fixtures to reduce some
boilerplate there.
Change-Id: I1f85fe2803060dc4423e673cb7b9f9bf799d09b9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11875
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We use a bit less cloning that way.
Change-Id: I28bf99577e4a481e35fbf99d0724adab5502a1bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11874
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
If builtins.path is passed a regular file, no filtering is applied.
We use the just-introduced file_type function in the EvalIO trait for
that.
This means, we don't need to pass through filtered_ingest, and can
assemble the FileNode directly in that specific match case.
This also means, we can explicitly calculate the sha256 flat digest,
and avoid having to pipe through the file contents again (via
blob_to_sha256_hash) to construct the sha256 digest.
Change-Id: I500b19dd9e4b7cc897d88b44547e7851559e5a4e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11872
Tested-by: BuildkiteCI
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This allows peeking of the type at a given path.
It's necessary, as an open() might not fail until you try to read()
from it, and generally, stat'ing can be faster in some cases.
Change-Id: Ib002da3194a3546ca286de49aac8d1022ec5560f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11871
Tested-by: BuildkiteCI
Reviewed-by: Ilan Joselevich <personal@ilanjoselevich.com>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
The builtins `placeholder` and `filterSource` are now implemented in
tvix-glue and so we no longer need their placeholder "implementations" in
tvix-eval.
Change-Id: Ibf161ccf1ad40103e9fbb688e9f6be58e7772af1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11867
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Ilan Joselevich <personal@ilanjoselevich.com>
OTLP shutdown behaviour was fixed in cl/11803, and tracy landed in
cl/10952 and cl/11815.
Change-Id: I310dfcc41ba62ce5b006e75a35feb839327b0e7c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11866
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Simon Hauser <simon.hauser@helsinki-systems.de>
Tested-by: BuildkiteCI
We don't need to require these things for these impl blocks yet.
Change-Id: I3cec958a637a4f900bdd38abd00e9133bf75ce46
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11865
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Simon Hauser <simon.hauser@helsinki-systems.de>
Tested-by: BuildkiteCI
This introduces optional helper function in tvix/tracing for trace
propagation and uses these helper in the `tvix-store`.
The GRPCBlobService, GRPCDirectoryService and GRPCPathInfoService now
accept a generic client, meaning the client can be generated with either
`::new` or `::with_interceptor`.
This was tested and validated by starting a `tvix-store daemon` and
`tvix-store import`.
Change-Id: I4b194483bf09266820104b4b56e4a135dca2b77a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11863
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
By default tokio::spawn does not instrument the spawned task with the
current spawn (https://github.com/tokio-rs/tokio/discussions/6008), do
this manually for all tokio::spawn functions in functions that are
instrumented.
Change-Id: I83dd8145b3a62421454aff57d34180cebbee8304
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11864
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Simon Hauser <simon.hauser@helsinki-systems.de>
Disable the progressbar on default and provide a interface for
optionally enabling the progressbar.
Change-Id: I0e31b1957e80cf64a8dcf65c6ceb3713975b8220
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11861
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Simon Hauser <simon.hauser@helsinki-systems.de>
We were currently always using SimpleRenderer, which would mean the
client would download every blob locally to calculate the checksum,
which of course is very slow.
Detect this special case and create a second instance (and client) for
now.
Change-Id: If39a862a5311e71c8073ac4e663f6c5dd437072e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11848
Reviewed-by: Simon Hauser <simon.hauser@helsinki-systems.de>
Tested-by: BuildkiteCI
This patch has already been applied on upstream but there hasn't been an
official release yet so we patch it ourselves.
Upstreamed patch: 0209f258cd
Follow-up of: https://cl.tvl.fyi/c/depot/+/11856
Change-Id: If56071ce5753fd26e2b4c203cd831bbe5d329009
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11858
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Since https://github.com/NixOS/nixpkgs/pull/220212 libiconv is now
automatically added for Darwin.
Change-Id: I2aaa266bcbc4d5a8256131aed36b4c2d040a8758
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11856
Tested-by: BuildkiteCI
Autosubmit: Ilan Joselevich <personal@ilanjoselevich.com>
Reviewed-by: flokli <flokli@flokli.de>
Since crate2nix v0.11 the new preferred way of importing Cargo.nix is
with callPackage instead of import.
Change-Id: Ifcc5c21e6c101cb9d0b3f1e8025b5ddb8cf99f20
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11855
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Ilan Joselevich <personal@ilanjoselevich.com>
Don't show an empty spinner for daemon commands.
Move the bar to the right, so the text is better aligned between spinner
progress and bar progress styles.
Generally, push progress bars a bit more down to the place where we can
track progress. This includes adding one in the upload_blob span.
Introduce another progress style template for transfers, which
interprets the counter as bytes (not just a plain integer), and also a data rate.
Use it for here and in the fetching code, and also make the progress bar
itself a bit less wide.
Change-Id: I15c2ea3d2b24b5186cec19cd3dbd706638497f40
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11845
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Simon Hauser <simon.hauser@helsinki-systems.de>
