In the book this is implemented via exceptions as control flow, and
I'm sticking somewhat closely to that by doing it via an error
variant.
Change-Id: I9c7b84d6bb28265ab94021ea681df84f16a53da2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2395
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This removes the runtime dependency on a borrow into the program
source code.
It's not yet ideal because there are a lot of tokens where we really
don't care about the lexeme, but this is what the book does and I
am not going to change that.
Change-Id: I888e18f98597766d6f725cbf9241e8eb2bd839e2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2394
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
... with this, functions now work.
Note that this bubbled up another weird code structure nit: The
parser::Function type should probably not carry its name directly.
However this doesn't matter much and I don't care right now.
Change-Id: If8e3b23f07033260433b9acd45f37c0e61fd2ff8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2393
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This slightly jiggles around interpret_block to let callers pass in an
environment.
Change-Id: I03112a38be0e8696242d8eae8d41da8c2cc66b48
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2392
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
In order to store a function in the interpreter's representation of a
callable, the lifetimes used throughout rlox need to be threaded
through properly.
This is currently not optimal, for two reasons:
* following the design of the book's scanner, the source code slice
needs to still be available at runtime. Rust makes this explicit,
but it seems unnecessary.
* the interpreter's lifetime is now bounded to be smaller than the
source's, which means that the REPL no longer persists state between
evaluations
Both of these can be fixed eventually by diverging the scanner from
the book slightly, but right now that's not my priority.
Change-Id: Id0bf694541ff59795cfdea3c64a965384a49bfe2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2391
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This is much easier to read & write. It's been annoying me all the way
through.
Change-Id: Ia91756d3111a2ce3f74e1c14bccc210118d221dd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2387
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This makes it easier to write interpreter tests, as we don't need to
look at output and such.
Change-Id: I6f8ce0cb0c482b8c00707d09e6be750c8e534176
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2384
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
... and adds an example builtin which returns the current epoch.
The types introduced by this, especially in the interpreter module,
are going to be used for user-defined functions, too.
Change-Id: I0364a67241e94642cde08489ac711a340e30ebe8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2381
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This makes it possible to distinguish between literal and other
values, such as functions.
Change-Id: I4d87b96c2988e25a61eecfeeb56188fabfd0dc40
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2367
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This has auth tokens etc.
Change-Id: I0877744de38d31f2dfe402ab009f31a22467c3b4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2365
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
There appears to be an issue where the internal trackpad tries to
register itself as a ps1 mouse rather than a usb one, which causes some
dmesg warnings that may or may not cause actual problems. Regardless,
blacklisting this should be harmless.
Change-Id: I00fb539b8acf4fbf1b9125786ea6dc4f649b08c7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2364
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
Necessary for tarsnap (for now), though I'm probably gonna get rid of
that sooner rather than later.
Change-Id: I4614a8e4ea62edd247a0fead6ae38d1f870b36f4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2357
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
- add <> as evil-surround pairs (this isn't working atm)
- Make lsp-ui-doc frames a reasonable size
- Use clippy as the cargo watch command for rust-analyzer
Change-Id: Ieee2633cbb332af6513af6b7484adeef5bdb3e06
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2356
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
None of the flycheck checkers work, really, and even if they did I
ignore them most of the time.
Change-Id: Iebb0b5202207f1fbada197bb5667fa8431ab879c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2355
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
This is too deep in my muscle memory, and actually fairly ergonomic on
my keyboard
Change-Id: I2e57c3221a52f00f62e5a7427bdfae6fe37ff850
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2354
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
Your regularly scheduled channel update, but slightly more regular
than before.
Included fixes:
* 3p/emacs: Pick telega.el from stable channel, unstable is broken.
* glittershark/fprintd: Compile with gcc9, since build fails with the
new default of gcc10
* glittershark/fprintd: Use a global overlay for the fprintd package
until https://github.com/NixOS/nixpkgs/pull/108962 lands in
nixos-unstable
* glittershark/home: Don't install rr, as it's not building with gcc10
Co-Author: Griffin Smith <grfn@gws.fyi>
Change-Id: Ia715fef64a405a220049fc540017356fa7370e0b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2341
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: glittershark <grfn@gws.fyi>
Reviewed-by: lukegb <lukegb@tvl.fyi>
Tested-by: BuildkiteCI
Running this after a codified refactor acts as a good smoke test,
if a big subset of packages is broken or any central packages are
broken, this should find them quite quickly, thanks to randomness™.
Just let it run for a few minutes and check the errors that pop up.
Change-Id: I1505dd31ca25b29254474a15cd6cb71d9743038a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2346
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Reviewed-by: lukegb <lukegb@tvl.fyi>
This is in order to advance the rewriting from stdenv.lib to lib.
https://github.com/NixOS/nixpkgs/issues/108938
The hard part about changing the argument is that a package might not
include lib in its arguments, which is why I use hnix to check whether
lib is included and add it to the import list if it doesn’t already
exist there.
So far, only the really common pattern of
meta = with stdenv.lib;
is rewritten.
Change-Id: I370f0a321b0e5a5bd21ec21fc7cefdd65ec845ed
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2345
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
I haven't used this much in the last months and it's causing issues
via some hook now, so bye bye.
Change-Id: If2b321887569b31c0ac7ad3fdd1b9c1d9f7b69f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2344
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
... this isn't finished yet, in particular it lacks:
* better support for attribute sets
* support for defining functions that take attribute sets
Change-Id: Ia897fccd9d2b674b6ed12907ae297bfdcc86db48
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2237
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
Reviewed-by: tazjin <mail@tazj.in>
Changes:
* ops/nixos/tvl-slapd: The NixOS module for OpenLDAP has removed the
ability to configure OpenLDAP directly and now forces users to use
some kind of weird Nix->OLC mapping that is mostly undocumented.
This moves the config we need to the new format in a way that may or
may not work and does the other arbitrary dance steps that someone
decided to impose on us. Note that this now throws lots of warnings,
but I can't be bothered to fix them.
* 3p: Random package removals accomodated
* users/glittershark: Pin grfn's kernel to 5.9, because the CK patch
is not yet updated for 5.10
* users/glittershark: Update vendor hash for pg-dump-upsert, I suspect
this changed because of something in the Go build machinery in
nixpkgs. The deleteVendor flag also has no effect anymore and has been
removed.
* users/glittershark: agda build is broken, commenting out development
home-manager environment until it can be fixed
* third_party/haskell_overlay: updating random needs upper boundarles
of a few dependencies relaxed (curse them)
* third_party/gerrit_plugins: for some cursed reason the fixed-output
hash of the gerrit owners plugin fetchgit changed, updated.
Same for the checks plugin.
Change-Id: Ica37995fe8039d3ba80eab643867f98795c56734
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2295
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Reviewed-by: glittershark <grfn@gws.fyi>
Reviewed-by: tazjin <mail@tazj.in>
A little executable, combining the netencode and mustache libraries to
make easy templating from the command line possible.
Combined with the nix netencode generators, it’s now trivial to
populate a mustache template with (nearly) arbitrary data.
Yay.
Change-Id: I5b892c38fbc33dd826a26174dd9567f0b72e6322
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2320
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
The netencode standard, a no-nonsense extension of netstrings for
structured data.
Includes a nix generator module and a rust parsing library.
Imported from
e409df3861/pkgs/profpatsch/netencode
Original license GPLv3, but I’m the sole author, so I transfer it to
whatever license depot uses.
Change-Id: I4f6fa97120a0fd861eeef35085a3dd642ab7c407
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2319
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
A bunch of writer functions wrapping the `buildRustCrate`
functionality of nixpkgs. Can be used to write inline rust code, or
rust code read from files with `builtins.readFile`.
Change-Id: I9d74e9381b858b485925e4dc3fbb7fc392877c0a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2318
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Simple helper function to generate a netstring that is a list of
key-value pairs, to serialize a nix dict. Also adds a python lib to
read the serialized form into a dict again.
Change-Id: I306c0cfd51640c0658d32c8d3a4f3d332ba448f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2315
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Uses the new restrict type to make sure flake errors start with an E.
Change-Id: I30369ade28e1ef612c91a368de2d5b128e6cf2a9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2313
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
This is a reexport of nixpkgs.writers.writePython3, but the libraries
are passed the package set, like with other writers.
Change-Id: Ia5a2ed1b6b329700836a8575d2bde768bf64fb31
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2311
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Smol writer to create a python lib directly from a nix string.
The resulting library can be consumed by the writePython3 writer.
Change-Id: Id3d793564d230b38a08f65140bda4287285e1a72
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2310
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
If there was no parent, the while loop would try to get the parent of
a `nil`, which crashes and burns.
We now also ignore any non-named parents; this might be unnecessary,
if tree-sitter parent nodes are always named, but I don’t know that at
the moment and it’s not documented very well, so better safe than
sorry.
Change-Id: Ia72ee9241b885ab312f8ecf7a8fbfece7eea8f1b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2263
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Always goes to the first child for now.
Change-Id: I1d00b2f2013ba7e5f88622d1de3c99500e5f1a7a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2261
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
We skip intermediate nodes that do not have any siblings, because they
are irrelevant to navigation and just add extra keypresses without any
highlight changes. This might not be the best choice, we’ll see.
Change-Id: I75fbf79aa7915172e426442a076d57cfbebf5421
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2260
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Resets the cursor to the named node under the cursor.
`-right` does not do it anymore, so it’s possible to navigate on
higher levels of the tree instead of always resetting to a leaf.
Change-Id: Id330854c72ea24da0cc8611f30f5617e0f127c1b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2259
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Has a little setup to get the cursor position and map it onto a tree
sitter node. The current node is saved in a cursor variable, and a
highlight overlay marks the range of the current node in the buffer.
Change-Id: I0af56115f928732e993fbefe978a246ca7c757ee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2258
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
This is currently a bit hacky because of the environment
wrapping/unwrapping, will refactor this to just keep a single Rc
around instead.
Change-Id: Iad1cbbe35112d0329248d4655a09260fc60644c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2304
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Adds scoped environments using a sophisticated structure known as an
SRPT, which stands for "shitty parent pointer tree".
Change-Id: I62f66aabe6eb32ea01c4cabcca5b03cfefcc28ee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2301
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
I'm building a database! I have to open all the files!
Change-Id: Ie77ad6fafe837c0ddba6b5d56cdc06d787807d4e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2257
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
* rebases the send scope patch
* removes the API key override patch, lieer now has a configuration
option for this
Change-Id: I198e8b61855f6cdb2b1439a1c8f2d9d69261c1b5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2242
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
These didn't appear to be the source of the flickering after all.
Change-Id: Id3cce3e7905d0af21dc6ec4dc3a11828451378fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2254
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
Split the 6 channels of input I have from my audio interface into 2
separate channels for inputs 1 and 2, so that I can have only the one
microphone feed into video chat apps.
The way this is done right now is less than ideal as it doesn't support
any sort of hotplugging - at some point, I should figure out the
appropriate udev invocations to make that work.
Change-Id: I53dc363173fa8db591b0e9cb08258d90835c1109
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2249
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
More bindings that existed in the default i3 config but I had never
explicitly specified.
Change-Id: I57de0d3221afac299da9a09224564571037f67fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2245
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
An ec2 node I'm using as a remote dev box
Change-Id: I7d81371ecdc11d6c1b5bc06d1b4f55de534d25ad
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2244
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
These take precedence over cabal old-style aliases, since those aren't
used anymore
Change-Id: Iad1593bffb35d8f7b9c7df16c7c2da09a6ebb906
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2220
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
This is a step towards making the completing-read framework more
easily interchangeable (I'm eyeing selectrum).
Change-Id: I7a066e212a5384136defbba8f11ef9ed57abf22e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2240
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
I'm too tired for part 2.
Change-Id: Ic7058344806466276e3792e9ff9bbf660a18f672
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2239
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Solve time is like 36 hours, that must be a record!
Change-Id: I3713f033d83e6179a5d5fa7513952ee3864a6164
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2238
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This lets the parser collect multiple errors instead of returning
after the first one, with some optimistic synchronisation after
encountering something that looks wonky.
Change-Id: Ie9d0ce8de9dcc7a3d1e7aa2abe15f74cab0ab96b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2236
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
... with the exception of parenthesised expressions, because error
threading is not implemented yet.
Change-Id: I8d455d85e647548d5b71cbfd3d078f4970dab7fb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2232
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This changes the structure of the output, too, where all AoC solutions
now end up in a big folder with `bin/day$n` executables.
Change-Id: I77928f4129489d06779b50059835925652688c9c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2231
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
... found this in the same place as hanebuschtag.txt
Change-Id: Iff5f4867b6c1d7685edae8a190489f3efb4890bc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2229
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This old, legendary file should never be lost.
Change-Id: I2ae1607da24d684199c4136a880f56528d45a6e8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2228
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Something I changed - perhaps removing lib.mkOptionDefault - caused
the *default* i3 keybindings (things like switching workspaces and
toggling the split layout which I had not added myself) not to get
added. This adds them back.
Change-Id: I301a346eabb4f7fc4499b60a4c26956fb1e08b0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2218
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
This actually appears to be working this time!
Change-Id: I3e10eb7e1621a050e024b8b53313f13d44a999ae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2217
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
This is a whole pile of things suggested by the internet to fix the
weird text flickering issues I've been seeing. upon first look it seems
like one of the kernel params (or all of them, or some combination of
them) fixed the issue.
Change-Id: Idc98902b46d4cba3bab367f6e22fb9ad10b26a26
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2216
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
Running docker is silly if I can't access it
Change-Id: I476915dacd44fac1ce4c533a84849fa6175d8107
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2215
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
At some point I should just convert this into an option that gets set
per-machine...but whatever.
Change-Id: I745fc5126469e887f8657e990d14a7e8b5085330
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2214
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
... mostly some AST boilerplate and a first top-level rule, plus
boilerplate similar to that set up in the Scanner.
Change-Id: I605d1de23c47a3b3702ab4f62cd3371bc3988c7d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2194
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Accidentally removed this everywhere when I disabled it for Darwin
Change-Id: Ia3480f1fbc6431a27da8c1de03bf0a66808f46b9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2208
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
rustup and rust-analyzer for now, but this will likely also have shell
aliases and the like
Change-Id: I7838e537a72600410205e018a0c86be1493a9ffe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2207
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
To avoid it clogging up git status in the depot
Change-Id: I102126dedb427d632679ee091aced6971495b8cc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2206
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
My new work laptop, a dell XPS 13.
Change-Id: Ieab06622c9b280182025edfa63adf649e5fc70d8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2205
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
Reviewed-by: lukegb <lukegb@tvl.fyi>
I want to use this as a prefix key instead
Change-Id: Idc865eb2edd1cbeff0b8a849232d98272c21ca8d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2204
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
... and show them to users, very crudely.
Change-Id: If4491b14db1124313f6ab7e5fbfdce9fea501d11
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2193
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
Note that Lox does not support escapes, and I don't care about that.
Change-Id: Ie848cbc1164c4b005b15e29aad8fe723aaa68d1b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2190
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
The "swap-window" command swaps two windows, the 'source' and
'destination' window, exchanging the indices they occupy in the window
list. In at least tmux 2.8 (which is what's in Debian Stable), if the
window under focus is the source window, then focus follows that window
(i.e. the focus changes to the current window's new index atomically
with it being moved to that index).
In more recent tmux versions, this is not the case, and the focus
remains on the old index, so that the replacement window comes under
focus. The former behaviour is still possible, but must be explicitly
requested.
Change-Id: Ieff606dfc2624b869d3bb6e1344dd4d0c6301857
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2169
Reviewed-by: multi <depot@in-addr.xyz>
Tested-by: BuildkiteCI
... they're just noisy at the moment. This isn't complete because it
doesn't thread through scanner errors.
Change-Id: I0f75d2b20fa3f57be1af5d1d8aa8059856855825
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2162
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This makes it easier to work with the Unicode issue. The original
string representation can be discarded.
Change-Id: I740be4cb9654679ea7950f3899c5c709b1e7a739
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2160
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
This was locked away in the urbint-specific module, but I use it
elsewhere.
Change-Id: Ifced2196dc22a9dbed74a18d4e1fed9488eb0e26
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2152
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
Update everything in home-manager to properly work on darwin (including
adding dobharchu as a top-level attribute from
//users/glittershark/home) and also fix font faces and sizes in emacs
config
Change-Id: Ica889dd212876030d5c2a916a71d8b614e6964f1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2147
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
This adds my standard inputrc to my home-manager configuration, via the
latter's readline module, and adds nix-shell detection to my bash prompt
string.
Additionally, nix-shell is wrapped in a shell function, so that entering
a nix-shell environment automatically runs bash as a subprocess where
appropriate, as the default environment spawned by nix-shell is not to
my liking.
Change-Id: Id5b1b9415a185ad9920f268c66de32d6ccc0b452
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2146
Reviewed-by: multi <depot@in-addr.xyz>
Tested-by: BuildkiteCI
This was only done to get an upgraded version, which is no longer
necessary with the nixpkgs bump but was also causing incompatibilities
with opengl
Change-Id: Ic398b4ac6caf24a1d40b7a4917b5053fba12d97a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2145
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
... still not that interesting, but at this point slightly divergent
from the book:
The book embraces mutability for interpreter state, initially for
tracking whether an error condition has occured.
I avoid this by instead defining an error type and collecting the
error values, to be handled later on.
Notes: So far nothing special, but this is just the beginning of the
book. I like the style it is written in and it has pointed to some
interesting resources, such as a 1965 paper titled "The Next 700
Languages".
Change-Id: I030b38438fec9eb55372bf547af225138908230a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2144
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
