I want to couple my EXWM workspaces with monitors. E.g. - I'd like my "Chatter"
workspace to prefer my `4k-vertical`. This change supports that.
I also did a small amount of formatting, which I don't think belongs in a
separate commit.
This is a helpful reminder to ensure that the exchange rate is always
fresh. Ideally I could use Google Sheets formulae to take a snapshot of the
GBP:USD exchange rate *at a point in time*, but I haven't set that up yet. Maybe
it'd look something like:
```pseudocode
=GOOGLEFINANCE("GBP:USD", "September 1, 2020")
```
I'll have to look into this.
My newly minted macro for defining monitors introduced two bugs:
1. Laptop defined its position in terms of 4k-horizontal and 4k-horizontal
defined its position in terms of laptop, I introduced a circular dependency.
2. The identifier, `laptop-monitor`, which `window-manager.el` depends on, is
now defined as `laptop`.
A friendly reminder to myself to always test new Emacs builds to make sure that
everything can initialize properly. This is something that my CI should be
automating, but ever since I moved flats, I lost my CI and need to restore it.
This is another reminder to drop into a TTY when Emacs fails to initialize, run
`nix-env --rollback`, then attempt to restart X. But this time, debugging this
entirely from a TTY wasn't so disappointing.
I recently acquired a new monitor, which I'm orienting vertically for logs,
chats, etc. As such I needed to add more functions, KBDs to wrangle the
setup. To DRY up my code, I define a macro, `display-register`, as a DSL for
supporting new monitors. This:
- defines two functions for enabling and disabling the displays
- defines a constant, `display-<name>`
It's basically just a wrapper around `xrandr`, and that's good enough for now.
My modeline was displaying the local time (not UTC time) and appending the UTC
timezone offset, which was confusing me.
When it was `00:03` in London, my modeline would read `00:03+01`. One way of
interpreting this is that it's `00:03` in London and the `+01` is a reminder
that I'm one hour ahead of UTC. However, I was reading it as though it was
`00:03` UTC and thus `01:03` in London.
I had to set `display-time-string-forms` instead of `display-time-string` to
pass the `t` argument to the `ZONE` parameter to indicate that I'd prefer to use
UTC time and not local time when expanding the variables.
I think 24 hours is more generous than we'd like these to be.
Change-Id: Ie56822f98942ab74048d908ab821a404dc841e4a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2003
Reviewed-by: tazjin <mail@tazj.in>
Reviewed-by: eta <eta@theta.eu.org>
Tested-by: BuildkiteCI
Adds a function `songwhip-lookup-url` which looks up the supplied URL
on Songwhip and copies the Songwhip link if a result was found.
This is bound to `s-s w` for convenience.
Change-Id: I3b529a058ee56f992942760910822490e6324259
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2002
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
It's a little easier to use this for Swedish than to compose the ä and
ö in the Norwegian layout.
Additionally - to avoid problems when switching to keyboards that have
no hardware remapping - re-applies the caps:super flip on every layout
switch.
Change-Id: I1b2c55761514745291d0eeb1502fa503f84f8aa1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/2001
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
magit-read-org-clubhouse-branch-name returns the branch with the prefix
in it already, so we don't need to add it again here.
Change-Id: I0e753173bc366a8458ccd38a936ae078bbac79f8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1999
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
* bumps to HEAD of master
* include the zen_workaround script in the drv output
Change-Id: I8f5f33a61b9395295c02f3ea5e930a81b3ffa7ac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1990
Tested-by: BuildkiteCI
Reviewed-by: kanepyork <rikingcoding@gmail.com>
Reviewed-by: glittershark <grfn@gws.fyi>
For some reason having these in a with-eval-after-load isn't working, so
let's try this out.
Change-Id: Ia419962626c7bd26776ed6fde977698998a18155
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1998
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
This fixes a typo in f43dfd4b8e.
Change-Id: Ifc3050adc4c25a146a5d8c72e964d9aefb3bc580
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1994
Tested-by: BuildkiteCI
Reviewed-by: multi <depot@in-addr.xyz>
Previously this used git checkouts of home-manager.git and nixpkgs.git on
whitby, which is self-evidently non-reproducible, so instead use pinned
tarballs of those repositories as data sources.
Change-Id: I3bd01e44d746c62e6bfbeab2e7698ae9954c8a94
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1993
Tested-by: BuildkiteCI
Reviewed-by: multi <depot@in-addr.xyz>
It was only used for #'-each, for which the built-in dolist is sufficient.
Change-Id: I326d8b733b36b2edfebd4e9384e70b8a570fee0f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1987
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
Archiving notes is done by just changing the filename to an `archive-`
instead of `note-` prefix.
Unarchiving is not yet implemented and should be done by moving the
note to a *new note ID*.
Archiving is bound to 'a' in the note list.
Change-Id: I8c225a25bdac5147a26030f47f24edee497f69df
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1986
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
This mode displays the note's timestamp in its header line, and the
content in its body.
Some rudimentary key bindings are set up in the list view to view
notes in full (RET), and in both modes to quit the current buffer (q).
Change-Id: Icb35baec220a9efcfa2b86617b16178669df996f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1985
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
'url is the API url of the PR, we want html_url to link to the web UI
Change-Id: I058592cde8c01e0feb5f7d51b577f1c41137a717
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1989
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
Adds a very simple initial display of all notes in chronologically
descending order.
Currently this is a read-only view with no available actions.
Change-Id: I6d47363909f1a9ab8d1d18a1c44966883aa758ad
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1983
Reviewed-by: tazjin <mail@tazj.in>
Tested-by: BuildkiteCI
I'm writing a note taking system because I don't like any of the
existing ones.
This adds a note-taking function which prompts the user for note
content and persists it in a user-configurable directory.
Next steps are roughly:
* listing notes
* editing notes
* archiving notes
At which point I would consider this functional. The idea is to keep
adding incremental improvements that fit my workflows after that, and
if it ends up being useful for anyone else - great.
Change-Id: I7ae0eb4015511ebdbaeff92d8d32502726eb57c4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1981
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
The code that calls queryPathInfoUncached explicitly catches the
InvalidPath exception and translates it into a null result - but the RPC
code was throwing a regular old Error for invalid paths. At some point
we should get rid of all the exception-driven control flow in this whole
thing, but in the meantime this gets us back to functional.
Change-Id: I2a38790ee0c691ab0c8394c7738d7693fa42aa10
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1980
Tested-by: BuildkiteCI
Reviewed-by: kanepyork <rikingcoding@gmail.com>
The static_assert is present to force us to change the constructor when a member grows.
Change-Id: Ifa4f4a03eb7ce13cff109cf26ecf0032045905e9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1972
Tested-by: BuildkiteCI
Reviewed-by: glittershark <grfn@gws.fyi>
Make all static std::strings constexpr std::string_views, and replace
concatenation with absl::StrCat where necessary.
Technically all of these are constant, so they really don't need to be
top-level statics - and since I'm trying to get rid of as much global
state as possible in preparation for making the nix daemon properly
multithreaded I figured I'd knock these out while I was at it.
Change-Id: Ibd3ad9ef68f0a0eacb135541b39fdb13dae042e1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1939
Tested-by: BuildkiteCI
Reviewed-by: tazjin <mail@tazj.in>
After creating a pull request link it to the currently clocked in
org-mode headline if any.
Change-Id: I75d7e70316494e355e11864496fdfc8b9e3009e1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1979
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
the oauth2 emacs lib *claims* it does this for us, but it demonstrably
doesn't.
Change-Id: I6495ac30799bb3d3fd7406cec5139602c311d22a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/1977
Reviewed-by: glittershark <grfn@gws.fyi>
Tested-by: BuildkiteCI
