We use the (slightly more tolerant) from_str to deserialize, and
serialize out as SRI.
Change-Id: If76b0ed2d4e243904f02df34f6c90b976c0bab8c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11393
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Move the code implementing it from StorePath to StorePathRef, and have
the StorePath impls use that too.
Drop the debug_assert in every comparison - we have tests for this to
ensure it keeps working, and built up some confidence by piping a lot of
other store paths through it in the meantime.
Change-Id: I288bad3dfa597f68d63c4bcda7791f722b7a8ced
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11392
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
We forgot to only write the part of the padding that has not been
written already.
Unfortunately it seems the tokio mocking thing does buffer small writes,
so the tests succeeds even with the bug :-/
Change-Id: I5a6cf04212d559728639427c57207094d507ec75
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11384
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
Make it a bit more clear that this is the total padding length, not the
padding length we still need to write.
Change-Id: I9ff4aa16f256fda367b4b9295abf82ed01b1f989
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11383
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This is perfectly fine to track the position inside a reader too, so
rename it to reflect that.
Also make the docstring a bit less write-specific.
Change-Id: I831b0a8fe44a2477d4af96fefc692b9aabc378f1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11382
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We actually did construct other payload sizes than the test function was
intended to, because I'm too stupid to count. Fix that, and also update
a leftover _debug in a test name.
Change-Id: I1bff8551f2078afe82f789646b851f2fcff3e82c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11381
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Moving out the handshake route out of tvix-daemon to nix-compat.
We're bumping the protocol to version 37. It does not change anything
for us. Version 37 introduced a change in the build result
serialization. We do not implement that for now.
Tested tvix-daemon against Nix via the integration test to make sure
we did not break anything in the process.
Taking advantage of this refactor to remove the unused anyhow
dependency in tvix-daemon.
Change-Id: I8a2aad0b6dbb0aaa997446a612a365fd7d70336c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11379
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This allows using read_u64, write_u64, which is a bit easier to juggle
with.
Also, update names to align with the nix codebase, which makes it easier
to spot both the constant name as well as the value.
Leave the ASCII interpretation as a comment afterwards.
Change-Id: I0b9ab187acd22807e2785b0722aa4300dab37c51
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11378
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
`primitive.rs` implements reading and writing primitive (fixed-length)
types in the wire format, used in the the nix daemon protocol and NAR
format.
Move worker-protocol specific magic bytes to worker_protocol.rs (and
possibly further split there once needed)
Change-Id: If681c01e9460294619f1d000229b81f0ac745810
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11377
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This includes String, &str etc. An example testcase with &str is
provided.
Change-Id: I900186d6ceb52f52bd41ef4596524c1f5b52470b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11376
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Use the same EMPTY_BYTES trick from BytesWriter to write out the
padding, rather than allocating a Vec.
Change-Id: Ifb4ba1b45b7388adbc135fc8e46fd3d3cedd30aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11375
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Only describe the format once (in `read_bytes`, and simplify the other
docstrings a bit.
Change-Id: Iff898f3c4173d506a357bc14bdffbf69c4c6e0e0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11374
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
This isn't used anywhere so far, and if someone really wants to, they
can simply make the range open-ended.
Change-Id: Iae9bcaa1f7ea032dd3ee76c8c142a38b6b72894d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11373
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Tested-by: BuildkiteCI
We were wrongly using `'de` as a lifetime for both `Deserializer` and
`StorePathRef`.
This prevented Deserializing into a struct containing `StorePathRef`.
See https://serde.rs/lifetimes.html#the-deserializede-lifetime, the last
part of the paragraph:
The 'de lifetime should not appear in the type to which the Deserialize
impl applies.
- // Do not do this. Sooner or later you will be sad.
- impl<'de> Deserialize<'de> for Q<'de> {
+ // Do this instead.
+ impl<'de: 'a, 'a> Deserialize<'de> for Q<'a> {
This fixes it, and adds a test, deserializing into a `Container` struct.
It also fixes the existing test cases, deserialize_ref was actually
deserialize_owned, and deserialize_owned didn't exist yet - but they
alone are not enough to provoke the lifetime issues.
Change-Id: Iaed2832998cae5f192eafe7fd5243e82ff6e051e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11372
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Add the primitives necessary to read the client settings from the Nix
daemon wire protocol.
Introducing the read_string primitive. This trivial primitive parses a
read_bytes call, check the bytes are valid utf-8 bytes and wraps the
result in a String.
Change-Id: Ie1253523a6bd4e31e7924e9898a0898109da2fa0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11358
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This deals with writing byte packets of larger sizes to an underlying
AsyncWrite.
Its constructor receives the expected size. It also deals with writing
padding if flush/shutdown is called after writing all the payload.
Change-Id: I8acbf992467f3862ffb8c7d669e8c0c8eced14c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11355
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
Tested-by: BuildkiteCI
Let's make this usable for the entire crate.
Change-Id: I754408908a00296ee80dd52680f84b8a7cb22317
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11354
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Actually these are all u64 LE encoded on the wire.
Change-Id: I5ca22c7639607ac47117cd946e036a444271885a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11348
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Using all the primitives recently implemented to nix-compat to reach
the point where the Nix client start to send us operation requests.
Using a small integration test script (or the VM test, but let's face
it, it's too slow to be useful), we manage to reach the point where
we're able to read a store operation:
2024-03-21T18:53:27.624876Z INFO tvix_daemon: Incoming connection addr=unix
2024-03-21T18:53:27.625312Z INFO worker:perform_init_handshake: tvix_daemon: Trust sent conn=Connection(unix) conn=Connection(unix)
2024-03-21T18:53:27.625406Z INFO worker: tvix_daemon: Client hanshake succeeded conn=Connection(unix)
2024-03-21T18:53:27.625488Z INFO worker: tvix_daemon: Operation received op=SetOptions conn=Connection(unix)
We had to take some shortcuts wrt. stderr/log management. The CPP Nix
codebase is a bit confusing in that area. I'll need to spend more time
reading this to fully understand what's happening there. For now,
sending the STDERR_LAST command to the client does the trick.
Change-Id: I9b0e20a52d885e64fe29188496aac5334de61edd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11233
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is used by the nix client to determine whether or not the daemon
trust it. The trust conditions check are daemon-specific, hence not
part of nix-compat.
Change-Id: Icbcba2f7f1fd58f67e7da72d22a264f5a3f3619d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11231
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Write counterpart of read_bytes. Despite its name, we mostly use it to
write strings (as in ascii strings) to the wire.
We also extract the padding calculation in its own function.
Change-Id: I8d936e989961107261b3089e4275acbd2c093a7f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11230
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This allows StorePathRef as keys in a hashmap, by deriving Hash. The same is already done for StorePath.
Change-Id: I3fc54c45787948116dcb27dfb5dc806b9b505835
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11269
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We tried to be more strict than Nix, actually detecting if multiple
hashes were specified, or other garbage at the end.
However, Nix seems to just chop off at the end, so happily accepts
anything afterwards.
Example: https://github.com/NixOS/nixpkgs/pull/298041
Example: https://github.com/NixOS/nixpkgs/pull/298052
Change-Id: I2c1a49f51c8f8589a84df2fbf148e67e7380b550
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11234
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Setting the wire module as public to re-use it from tvix-daemon.
Change-Id: I570cffc480c7b784d813663f77572bbe9d4e8259
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11197
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This introduces a version reading sized byte packets. Both read_bytes,
accepting a range of allowed sizes, as well as read_bytes_unchecked,
which doesn't care, are added, including tests.
Co-Authored-By: picnoir <picnoir@alternativebit.fr>
Change-Id: I9fc1c61eb561105e649eecca832af28badfdaaa8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11150
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Tested-by: BuildkiteCI
These are not streams, but AsyncRead and AsyncWrite.
Change-Id: I7d988fa0490800b72862f4f0fcac3dceac70ec26
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11149
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This brings some initial Nix wire format parsing code, used in the nix
daemon protocol, remote store/builder protocol, as well as the NAR
format itself (note we already have more specialized code for the last
one).
Thanks to embr, this code already exists, in
https://codeberg.org/gorgon/gorgon/src/branch/main/nix-daemon/src/wire.rs,
and we can vendor it into here, as EUPL is compatible with GPL (in that
direction).
The code uses the tokio::io Reader and Writer traits, not the ones from
the `futures` crate, as they provide some more convenient `read_u64_le`
functions.
More application-specific parsing code, as well as code to read strings,
or bytes are left out for now, as we want to be be more restrictive
w.r.t allowed max sizes, and need to parse bytes, not strings.
The code slightly diverges, as we have clippy looped into CI.
`Ok(…?)` can be turned into just the inner expression, and
some .and_then can be expressed in a simpler fashion.
Change-Id: Ie3adcb485e9d66786673b1962a08d4e5df3781d9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11148
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
derivation_or_fod_hash constructs ATerm bytes and feeds them to sha256.
input_derivations being slightly modified is an implementation detail,
so move the BTreeMap construction inline, and have aterm_bytes in a
let binding (and feed it to the hash function directly while
constructing it).
This makes it a bit more understandable what's going on.
Change-Id: I2f5cfbd1c964fd39ac731ca39e76cfc168f4c7d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11147
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: John Ericson <git@johnericson.me>
This is only used inside this function, in 2 of the match cases.
Change-Id: Ib361f5ee0e3b203802f7d05b9a7f332d14bbcf80
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11143
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: John Ericson <git@johnericson.me>
Tested-by: BuildkiteCI
The outer fingerprint used for store path calculation is always a sha256
digest. This includes both input and output-addressed store paths.
We used a NixHash here, which can also represent other hash types, and
that had a bunch of annoyances:
- Whenever we had the bytes, we had to wrap them in a NixHash::Sha256().
- Things like AtermWriteable had to be implemented on NixHash,
even though we then had an assertion it was only called in the
NixHash::Sha256 case.
Change-Id: Ic895503d9b071800d2e52ae057666f44bd0ab9d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11142
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: John Ericson <git@johnericson.me>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Implement the fetchurl builtin, and lay the groundwork for implementing
the fetchTarball builtin (which works very similarly, and is implemented
using almost the same code in C++ nix).
An overview of how this works:
1. First, we check if the store path that *would* result from the
download already exists in the store - if it does, we just return
that
2. If we need to download the URL, TvixStoreIO has an `http_client:
reqwest::Client` field now which we use to make the request
3. As we're downloading the blob, we hash the data incrementally into a
SHA256 hasher
4. We compare the hash against the expected hash (if any) and bail out
if it doesn't match
5. Finally, we put the blob in the store and return the store path
Since the logic is very similar, this commit also implements a *chunk*
of `fetchTarball` (though the actual implementation will likely include
a refactor to some of the code reuse here).
The main thing that's missing here is caching of downloaded blobs when
fetchurl is called without a hash - I've opened b/381 to track the TODO
there.
Adding the `SSL_CERT_FILE` here is necessary to teach reqwest how to
load it during tests - see 1c16dee20 (feat(tvix/store): use reqwests'
rustls-native-roots feature, 2024-03-03) for more info.
Change-Id: I83c4abbc7c0c3bfe92461917e23d6d3430fbf137
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11017
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: aspen <root@gws.fyi>
Otherwise this causes conflicts when adding a more recent zstd version
to another crate.
Change-Id: I02d1b1a37f18711c0969cb04e761e967fc4655dc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11100
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This allows peeking at the mode without matching on all enum kinds of
CAHash directly.
Change-Id: Icca147a876f7f4cff0bbaa067ac4dae40d05bee9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11069
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Currently CAHash only deserializes the hash in hex code while
the serializer outputs a nixbase32 hash. This means that you can't currently
deserialize what has been serialized.
This change makes deserialize support any digest format (so hex, nixbase32
and base64) as well as flattens the deserialize code and error handling.
It also implements serde methods of HashAlgo directly using Display and TryFrom
implementations because otherwise these would get serialized as eg. Sha256 instead
of sha256 which also broke CAHash serialize/deserialize.
Change-Id: I1941a72eaec741e4956292adaaf0115b97f260ba
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11082
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This doesn't return the digest, but the internal NixHash.
To get the digest, you use `ca_hash.hash().digest_as_bytes()`
(as done in tvix/nix-compat/src/derivation/write.rs).
Change-Id: Ib07918dec63ae42ddf8c8d3f1d10510f9c4df255
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11070
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Move the the `fixed:out:[r:]{}:` generation to a helper function,
use matches! for more clarity.
Change-Id: I4e930c42aacbf5c7451d1f8c8c80ccb4c45389f0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11006
Tested-by: BuildkiteCI
Reviewed-by: aspen <root@gws.fyi>
Autosubmit: flokli <flokli@flokli.de>
...in `Derivation`.
This is more type-safe and should consume less memory.
This also removes some allocations in the potentially hot path of output hash calculation.
https: //b.tvl.fyi/issues/264
Change-Id: I6ad7d3cb868dc9f750894d449a6065608ef06e8c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10957
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Peter Kolloch <info@eigenvalue.net>
Reviewed-by: Peter Kolloch <info@eigenvalue.net>
...so that we can also use `StorePath`s in
derivation.input_derivations.
Towards https://b.tvl.fyi/issues/264
Change-Id: I71d296ca273979c70f277a7f4f88a5f76de3d8be
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10973
Reviewed-by: Peter Kolloch <info@eigenvalue.net>
Autosubmit: Peter Kolloch <info@eigenvalue.net>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
...so that we can parse (and at the same time
validate) store paths directly to `StorePath`s.
https: //b.tvl.fyi/issues/264
Change-Id: Ide4cb5403f8e3400f7d2a5838c652ac35dbd1a4f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10968
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Peter Kolloch <info@eigenvalue.net>
Tested-by: BuildkiteCI
Necessary, if we want to use it inside of `Derivation` etc.
Change-Id: I8888060417b2ee83ac52d7ec3e7b27c393271d8b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10947
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: Peter Kolloch <info@eigenvalue.net>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Instead of constructing a completely new derivation for hashing,
allow to call hashing with substituted input_derivations.
This
1. reduces the number of allocations,
2. prepares substituting `String`s for store paths with proper `StorePath`s without needing a separate derivation struct that allows hashes without `/nix/store` in input_derivations, and
3. keeps the change local to the `Derivation` implementation.
Change-Id: I36732c78f98fc59f0925b65823773222782017b0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10935
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Peter Kolloch <info@eigenvalue.net>
