Use try_stream! rather than stream!, and a bit more map_err and ok_err
to make things a bit more concise. Once we have proper error types here,
and impl Froms, a lot of the error mapping would disappear entirely.
Change-Id: I5240a6b0ff7818b94c151322774242b2c142e33b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11633
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Replace the loop manually driving the iterator with a for … in, and some
of the match with ok_or_else.
Change-Id: I6d7b3ef1bf1c7aa128bd6adef09390b54f79479e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11632
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
… in Cargo.toml.
This gets an imperative `cargo clippy` run to pick up that config,
so `-A clippy::blocks_in_conditions` doesn't need to be explicitly
specified anymore.
Change-Id: I32b6cc50c77c22cba0d816d0db508c2f94b2c383
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11659
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
We don't produce these erorrs anymore, no need to provide a conversion
to it.
Change-Id: I37933e436ad15c5d90b3ac270c4ef5742980513d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11614
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We don't want to block here, and this also means there's no poisoning to
deal with.
Change-Id: Ic375571970c48beace0005ae2c012135086a4d67
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11613
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This one doesn't require us to deal with poisoning, is upgradeable and
the right thing to use when locking access to data, not IO resources.
Change-Id: I78634953a73404500d28f51f1d93a87e215c8149
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11612
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This does IO, which might take a longer amount of time than what we want
to be blocking the normal executor.
Use spawn_blocking instead. I didn't add it for the constructors, as we
only call these once.
Change-Id: I96231fcff8d10abe90cafde25a099a2db6ea9414
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11617
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
This never did any chunking, and sled (rightfully) performs really bad
if values get too large.
We switched the default to using the objectstore backend with the local
filesystem a while ago, no need to keep this footgun around anymore.
Change-Id: I2c12672f2ea6a22e40d0cbf9161560baddd73d4a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11616
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Once we break out with the root node, there may be no more elements in
the stream.
Change-Id: I6f5fc5662095aa2b2a56bcad506d25520d9ad00c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11592
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We got away with not properly dealing with this for the archive case,
where everything is contained inside a toplevel dir, but NARs can encode
a single file/symlink.
Properly break if the IngestionEntry path has the ROOT as parent, and
only create filling directories in the other case.
Change-Id: Ib378d0d1040de7c3fe310912a0b0488c55afee83
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11590
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
There's no need for this to be a &PathBuf.
Change-Id: I2d4126d57cfd8ddaad5dd327943b70b83d45c749
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11589
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We implement DirectoryService for Arc<DirectoryService> and
Box<DirectoryService>, this is sufficient.
Change-Id: I0a5a81cbc4782764406b5bca57f908ace6090737
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11586
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
The emulator and bigtable client are quite big. Remove them from the
default //tvix:shell.
Put the tests behind a `integration` feature flag, and add a variant
with that enabled to CI, and drop the bigtable tools from //tvix:shell.
Change-Id: Ie042097a0d6fc26542faa96c139b77298ccb160a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11582
Reviewed-by: edef <edef@edef.eu>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This switches from using std::path::Path to using castore paths.
We can drop some error handling in descend_to, as absolute (or redundant)
paths are not representable.
We however now need to convert from a std::path::Path to our
representation, and decide to accept .. canonicalization, as paths in
EvalIO might contain this. Dealing .. to hop into another store path, if
we encounter this, should be dealt with in a previous step.
Change-Id: I5e94693808420c5d56587c68731252b54755bf93
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11575
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This allows converting from std::path::Path to castore PathBufs.
A flag is present to control .. canonicalization, and the usual caveats
about platform-specific differences apply.
Currently only added for unix, we'll carefully consider other platforms
on a case-by-case basis.
Change-Id: If289a92f75a2e5c3eec132b6a91a28d225fc1989
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11577
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
This allows using both Path and PathBuf in a function argument taking
`impl AsRef<Path>`.
Change-Id: Ibd3ba6fac538069d2fe729d1ef399fdef301668f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11574
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
These are fallible methods, so they should be named accordingly.
Change-Id: I6dc271c42989dd6500173488190f65381835d6fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11572
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The empty path (Path::ROOT) is explicitly a valid path, and "foo" is
simply a child of "". The root itself is the only path without a parent.
Change-Id: Iff00dc8aed89eaf98702b664c0df658bd5a1d88a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11569
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Use the shared code for validating node names, since that is what path
components represent.
Change-Id: I12109c1306b224718faa66cf1f2874c78c1436a7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11566
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Since PathBuf doesn't have inherent methods anymore, these just forward
to Path itself.
Change-Id: I30f44adc9994337c367bad985ada0e8fcb98dd6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11570
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
We implement Debug explicitly, so that we don't just see raw integers.
Change-Id: I11213094728f3e0c674562ee71c092a950041632
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11565
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This contains Path and PathBuf, representing platform-independent paths
representable by the castore model.
These are always relative, and platform-independent, which distinguishes
them from the ones provided in the standard library.
A subsequent CL will move IngestionEntry (and more) to use them.
Change-Id: Ib85857f4159ebc2f3c00192c95d4e5b54ffd4fcf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11558
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
Have ingest_entries return an Error type with only three kinds:
- Error while uploading a specific Directory
- Error while finalizing the directory upload
- Error from the producer
Move all ingestion method-specific errors to the individual
implementations.
Change-Id: I2a015cb7ebc96d084cbe2b809f40d1b53a15daf3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11557
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We shouldn't try to represent non-representable things in the ingestion
entries (only to throw an error).
It's cleaner to throw the error directly in the part producing the
stream.
Change-Id: I6b6f6d8c2f677425210142a39f1829ddeefec812
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11556
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: firefly <firefly@firefly.nu>
This is only useful for when we have access to a filesystem, so it
shouldn't be in the root.
Change-Id: I9923aaed1aef9d3a1e8fad41f58821d51c2eb34b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11555
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: firefly <firefly@firefly.nu>
Tested-by: BuildkiteCI
These can be arbitrary bytes in theory. Some of our libraries might
be more strict, or inconsistent w.r.t. their representation of path
separators.
Change-Id: I7981b74fc7d3dd79f5589cf2ef52ced7b71dd003
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11551
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
The one for `fs` was wrong, and ended up being attached to ingest_path,
and the one for `archive` was missing entirely.
Change-Id: I8a4c32fb5293badb1ea0764c278a88e4ca33c018
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11552
Tested-by: BuildkiteCI
Reviewed-by: edef <edef@edef.eu>
Prior to this, some tests would not build
or would fail in an obscure way.
Change-Id: I68587cc7592492ebfd71ca02fc7ccc9ff7c0196f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11544
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
The `Error` enum for the `imports` crate has both filesystem and archive
specific errors and was starting to get messy.
This adds a separate `Error` enum for archive-specific errors and then
keeps a single `Archive` variant in the top-level import `Error` for all
archive errors.
Change-Id: I4cd0746c864e5ec50b1aa68c0630ef9cd05176c7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11498
Tested-by: BuildkiteCI
Autosubmit: Connor Brewster <cbrewster@hey.com>
Reviewed-by: flokli <flokli@flokli.de>
Ingesting tarballs with a lot of small files is very slow because of the
round trip time to the `BlobService`. To mitigate this, small blobs can
be buffered into memory and uploaded concurrently in the background.
Change-Id: I3376d11bb941ae35377a089b96849294c9c139e6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11497
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: Connor Brewster <cbrewster@hey.com>
With `ingest_entries` being more generalized, we can now use it for
ingesting the directory entries generated from tarballs.
Change-Id: Ie1f7a915c456045762e05fcc9af45771f121eb43
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11489
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Rather than carrying around an Future in the IngestionEntry::Regular,
simply carry the plain B3Digest.
Code reading through a non-seekable data stream has no choice but to
read and upload blobs immediately, and code seeking through something
seekable (like a filesystem) probably knows better what concurrency to
pick when ingesting, rather than the consuming side.
(Our only) one of these seekable source implementations is now doing
exactly that. We produce a stream of futures, and then use
[StreamExt::buffered] to process more than one, concurrently.
We still keep the same order, to avoid shuffling things and violating
the stream order.
This also cleans up walk_path_for_ingestion in castore/import, as well
as ingest_dir_entries in glue/tvix_store_io.
Change-Id: I5eb70f3e1e372c74bcbfcf6b6e2653eba36e151d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11491
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Fixes some build warnings that only happen when building in release mode
which disables `debug_assertions`.
Change-Id: I554d5fce7c869c23cf4aa93179f0ee9f7f7c834e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11490
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: Connor Brewster <cbrewster@hey.com>
Reviewed-by: flokli <flokli@flokli.de>
`ingest_entries` requires that all directories referenced by entries in
the ingestion stream have an explicit entry in the stream.
For example, if the stream contains a file with path `foo/bar`, there
must be an entry that comes later in the stream for the directory `foo`.
Change-Id: I61b4fbbb73ea7278715e04271d8073b484e05e61
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11488
Autosubmit: Connor Brewster <cbrewster@hey.com>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Implement a first pass at the fetchTarball builtin.
This uses much of the same machinery as fetchUrl, but has the extra
complexity that tarballs have to be extracted and imported as store
paths (into the directory- and blob-services) before hashing. That's
reasonably involved due to the structure of those two services.
This is (unfortunately) not easy to test in an automated way, but I've
tested it manually for now and it seems to work:
tvix-repl> (import ../. {}).third_party.nixpkgs.hello.outPath
=> "/nix/store/dbghhbq1x39yxgkv3vkgfwbxrmw9nfzi-hello-2.12.1" :: string
Co-authored-by: Connor Brewster <cbrewster@hey.com>
Change-Id: I57afc6b91bad617a608a35bb357861e782a864c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11020
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Explicitly document and add a debug assertion for that.
It's up to callers to ensure this doesn't happen.
Change-Id: Ib5d154809c2ad2920258e239993d0b790d846dc8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11487
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Move error types and filesystem-specific functions to a separate file,
and keep the fs:: namespace in public exports.
Change-Id: I5e9e83ad78d9aea38553fafc293d3e4f8c31a8c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11486
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
This is not a stream of direntries anymore, but a stream of ingestion
entries.
Change-Id: I387f4497b6567066b24c58ca0262e710348180e9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11485
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Previously the store ingestion code was coupled to `walkdir::DirEntry`s
produced by the `walkdir` crate which made it impossible to reuse
ingesting from other sources like tarballs or NARs.
This introduces a `IngestionEntry` which carries enough information for
store ingestion and a future for computing the Blake3 digest of files.
This allows the producer to perform file uploads in a way that makes
sense for the source, ie. the filesystem upload could concurrently
upload multiple files at the same time, while the NAR ingestor will need
to ingest the entire blob before yielding the next blob in the stream.
In the future we can buffer small blobs and upload them concurrently,
but the full blob still needs to be read from the NAR before advancing.
Change-Id: I6d144063e2ba5b05e765bac1f27d41b3c8e7b283
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11462
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This adds `Directory::add` which is a convenience helper for adding
nodes into a `Directory` while preserving sorted order.
This implements `Ord` and `PartialOrd` for `FileNode`, `SymlinkNode`,
and `DirectoryNode` so `binary_search` can be used.
Change-Id: I94b86bdef5d0da55aa352e098988b9704cafca19
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11481
Autosubmit: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Userland likes to seek backwards, and until we have store composition
and can serve chunks from a local cache, we need to buffer the
individual chunks in memory.
Change-Id: I66978a0722d5f55ed4a9a49d116cecb64a01995d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11448
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This makes it easier to separate concurrent requests on the same inode.
Change-Id: I7637c1d889336beeb0d186182ce22fbf60fd16c3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11447
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
The docs state we must fill all of the buffer, except on EOF.
Change-Id: Id977ba99c0b15132422474ebbf82bb92b79d55ba
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11446
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
When (re)initializing a chunked reader, we were erroneously skipping the
first n bytes from all chunks, not just the first one.
Fix this, by passing in an enumerated list of chunks, and only calling
SeekFrom::Start() on the first chunk in the stream.
With this, I'm able to invoke b3sum on bin/bash successfully.
Change-Id: I52ea480569267e093b0ac9d6bcd5c2d1b4db25f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11443
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Increase the discard_buf to 4096 (as I've seen this size).
Use the ready! macro to propagate pendings.
Make it more clear what exactly should be skipped in total, and what
during the current iteration.
Also write down that poll_read call already takes care of updating
self.pos, as I ran into that trap earlier (and added it here).
Change-Id: I2d22e1c8a835c0f3dd0c648917009b2bad4fd57c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11442
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
If the resulting offset equals to our current position, there's no need
to recreate a reader.
Change-Id: I855f0c79c514c16ca48a78e12978af2835fbbd6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11441
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
State that this case applies if the blob is small enough to fit inside a
single chunk.
Change-Id: I0383514729e686799599b629cf1303b284147bb4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11440
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We previously returned Ok(None) when being asked for more granular
chunking info, signalling the blob does not exist at all.
This is however incorrect, we should return an empty Vec instead, as
documented in the trait.
Change-Id: I83ecc2027e0767134c7598792c2ee6d964853c66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11439
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
It's perfectly normal if we ask for more granular chunking info and the
backend responds it does not have it.
Change-Id: I593ab3e53b4f4e70c99f39b266546d2ac8eb10c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11437
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We're receiving bytes over the wire, and encode them the same way
B3Digest does internally, but don't use it for formatting, as we're
discarding that string.
In case the sent bytes don't have the right length, the string will be
short, but it's better to still have it as a field, even if it's not a
valid b3 digest.
Change-Id: I6ef08275d51c8a0d98f5e46844b15dfd05d17cd8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11436
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
These were copying unnecessarily. Instead, have a
InodeData::from_node(), which *consumes* the Node entirely, returns
`InodeData` and the split-off name (which is not part of InodeData).
Callers can then use the result in various helper functions, like:
- InodeData::as_fuse_type
- InodeData::as_fuse_file_attr
- InodeData::as_fuse_entry
… to prepare their replies to the kernel.
This removes not only a bunch of clones, but also a lot of copy-pasted
code.
Change-Id: Idbca5f25cc29e96c1f4c614b33dff2becb0a8738
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11435
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Use a proper graph library to ensure all nodes are reachable from the
root.
We had a bit of that handrolled during add(), as well as later, which
had an annoying bug:
Redundant nodes were omitted during insert, but when returning the list
during finalize, we did not properly account they need to be introduced
before their parents are sent.
We now simply populate a petgraph DiGraph during insert (skipping
inserting nodes we already saw), and use petgraph's DfsPostOrder to
traverse the graph during finalize.
If the number of returned indices equals the total number of nodes in
the graph, all nodes are reachable from the root, we can consume the
graph and return the nodes as a vec, in the same order as the traversal
(and insertion).
Providing a regression test for the initial bug is challenging, as the
current code uses a bunch of HashSets. I manually tested ingesting a
full NixOS closure using this mechanism (via gRPC, which exposes this
problem, as it validates twice), and it now works.
Change-Id: Ic1d5e3e981f2993cc08c5c6b60ad895e578326dc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11418
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Have a Option<Box<dyn DirectoryPutter>>, which is lazily initialized
whenever we first want to upload a directory.
Have the loop explicitly break when it encounters the root_node, and
deal with the flushing after the loop.
Deal with the FUTUREWORK (assertion for root directory digest matching
what the DirectoryPutter returns).
Change-Id: Iefc4904d8b8387e868fb752d40e3e4e4218c7407
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11417
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Separate this a bit stronger from the main application flow.
Change-Id: I2e9bd3ec47cc6e37256ba6afc6e0586ddc9a051f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11416
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Align these names and comments with the two users, to make it more
obvious we're doing the same thing here, just use a different method to
come up with entries_per_depths.
Change-Id: I42058e397588b6b57a6299e87183bef27588b228
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11415
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This did very little, and especially the part of relying on the outside
caller to pass in a Directory if the type is a directory required having
per-entry-type specific logic anyways.
It's cleaner to just inline it.
Change-Id: I997a8513ee91c67b0a2443cb5cd9e8700f69211e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11414
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This makes it easier to understand the code.
Change-Id: I0a9047433000551a6ba1f50a8c5c93527bc86216
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11413
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We previously updated this.pos also in case the underlying read returned
an error.
Also, use the ready! macro to remove the match block, and instrument
errors returned during start_seek.
Change-Id: Ic32e26579d964a76b45687134acc48d72d67c36f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11421
Reviewed-by: Brian Olsen <me@griff.name>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
When a directory or file is open()'ed, we already put some data into
a lookup table, and subsequent operations then use the returned handle
id.
By also adding the span that's been created during these calls into the
lookup table, we can properly set the span parent for these requests,
nicely connecting the individual operations to the bigger picture.
Change-Id: Ia354842fccdbc7f45c2d3efda3acf058b2dbc48e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11429
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Brian Olsen <me@griff.name>
Instead of creating another child span, we can use
`tracing::Span::current().record(k,v)` to add an additional field to the
current span.
Change-Id: I337faac0e73a0da6eb0a52cb75c2e8c026eff774
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11428
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This currently shares some code with readdir, except it's also providing
a second `fuse_backend_rs::api::filesystem::Entry` argument to the
`add_entry` function call.
Refactoring this to reduce some duplication is left for a future CL.
Change-Id: I282c8dfc6a711d00a4482c87cbb84d4950c0aee9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11426
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Use rq.handle in `release` too, and remove interpolating it into the
log message itself.
Also update the comment, we don't get ownership, just simply drop, and
change the level to warn!, as suggested in cl/11425.
Change-Id: If4e6cff6d8b580671b1548ae3862851db4af6694
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11427
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Similar to how we already handle opening files, implement opendir/
releasedir, and keep a map of dir_handles. They point to the rx side of
a channel.
This greatly improves performance listing the root of the filesystem
when used inside tvix-store, as we don't need to re-request the listing
(and skip to the desired position) all the time.
Change-Id: I0d3ec4cb70a8792c5a1343439cf47d78d9cbb1d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11425
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This allows us acquiring the lock in sync code still. Also, simplify
some of the error handling a bit.
Change-Id: I29e83b715f92808e95ecb0ae9de787339d1a371d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11424
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
We can just pass an async move closure to `self.tokio_handle.block_on`
and make this a bit shorter.
Change-Id: Iba674f34f22ba7a7de7c5bae59d64584884cb17c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11423
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This exposes `user.tvix.castore.{blob,directory}.digest` xattr keys for
files and directories:
```
❯ getfattr -d /tmp/tvix/06jrrv6wwp0nc1m7fr5bgdw012rfzfx2-nano-7.2-info
getfattr: Removing leading '/' from absolute path names
user.tvix.castore.directory.digest="b3:SuYDcUM9RpWcnA40tYB1BtYpR0xw72v3ymhKDQbBfe4="
❯ getfattr -d /tmp/tvix/156a89x10c3kaby9rgf3fi4k0p6r9wl1-etc-shells
getfattr: Removing leading '/' from absolute path names
user.tvix.castore.blob.digest="b3:pZkwZoHN+/VQ8wkaX0wYVXZ0tV/HhtKlSqiaWDK7uRs="
```
It's currently mostly used for debugging, though it might be useful for
tvix-castore-aware syncing programs using the filesystem too.
Change-Id: I26ac3cb9fe51ffbf7f880519f26741549cb5ab6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11422
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: Brian Olsen <me@griff.name>
We don't need to copy if we explicitly say that the returned
Option<Path> may hold onto bytes from the passed in &DirEntry.
Change-Id: Ib46b6fd2f8f19a45f8bef79c4c1d2fa6b490cad7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11410
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This is a stream of DirEntry, so let's call it direntry_stream.
Change-Id: I5b3cb4efba899d746393f75f6ece7eaa79424717
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11401
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This adds a Directory service using
https://cloud.google.com/bigtable/docs/ as a K/V store.
Directory (closures) are put in individual keys.
We don't do any bucketed upload of directory closures (yet), as castore/
fs does query individually, does not request recursively (and buffers).
This will be addressed by store composition at some point.
Change-Id: I7fada45bf386a78b7ec93be38c5f03879a2a6e22
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11212
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
This (and more) should now be covered by the generic testsuite
(in crate::blobservice::tests).
Change-Id: Ib3afc4f19f7e37a561b7398d43663dc941971f5c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11365
Tested-by: BuildkiteCI
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
We need to define behaviours and add tests for these.
Change-Id: Id5825fafbf47897d8de42503ea6006eb131b1082
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11281
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
This drops pretty much all of castore/utils.rs.
There were only two things left in there, both a bit messy and only used
for tests:
Some `gen_*_service()` helper functions. These can be expressed by
`from_addr("memory://")`.
The other thing was some plumbing code to test the gRPC layer, by
exposing a in-memory implementation via gRPC, and then connecting to
that channel via a gRPC client again.
Previous CLs moved the connection setup code to
{directory,blob}service::tests::utils, close to where we exercise them,
the new rstest-based tests.
The tests interacting directly on the gRPC types are removed, all
scenarios that were in there show now be covered through the rstest ones
on the trait level.
Change-Id: I450ccccf983b4c62145a25d81c36a40846664814
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11223
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This introduces rstest-based tests. We also add fixtures for creating
some BlobService / DirectoryService out of thin air.
To test a PathInfoService, we don't really care too much about its
internal storage - ensuring they work is up to the castore tests.
Change-Id: Ia62af076ef9c9fbfcf8b020a781454ad299d972e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11272
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
