When using the runTests feature of crate2nix the derivation that runs the
tests is put into passthru.test but all default.nix files for Rust crates
in Tvix threw that away.
This commit retains passthru so that you can get access to the test
derivation.
Change-Id: I8b7b7db57a49069348f08c12c00a3b1a41a0c05b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12215
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
*Node and Directory are types of the tvix-castore model, not the tvix
DirectoryService model. A DirectoryService only happens to send
Directories.
Move types into individual files in a nodes/ subdirectory, as it's
gotten too cluttered in a single file, and (re-)export all types from
the crate root.
This has the effect that we now cannot poke at private fields directly
from other files inside `crate::directoryservice` (as it's not all in
the same file anymore), but that's a good thing, it now forces us to go
through the proper accessors.
For the same reasons, we currently also need to introduce the `rename`
functions on each *Node directly.
A followup is gonna move the names out of the individual enum kinds, so
we can better represent "unnamed nodes".
Change-Id: Icdb34dcfe454c41c94f2396e8e99973d27db8418
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12199
Reviewed-by: yuka <yuka@yuka.dev>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This uses our own data type to deal with Directories in the castore model.
It makes some undesired states unrepresentable, removing the need for conversions and checking in various places:
- In the protobuf, blake3 digests could have a wrong length, as proto doesn't know fixed-size fields. We now use `B3Digest`, which makes cloning cheaper, and removes the need to do size-checking everywhere.
- In the protobuf, we had three different lists for `files`, `symlinks` and `directories`. This was mostly a protobuf size optimization, but made interacting with them a bit awkward. This has now been replaced with a list of enums, and convenience iterators to get various nodes, and add new ones.
Change-Id: I7b92691bb06d77ff3f58a5ccea94a22c16f84f04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12057
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Use the faster and newer MiMalloc memory allocator for all endpoints in
the workspace.
Change-Id: Ic60237284ed168e46ec6e8f28e2710bae4385c6f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12149
Tested-by: BuildkiteCI
Reviewed-by: aspen <root@gws.fyi>
Previously we had to make a mutable Config instance and set bytes and
other values in it because they were not exposed to the builder pattern
(https://github.com/hyperium/tonic/issues/908) but now they are, so we
just set them through the builder.
Change-Id: I8904c6b93f09173b56586024b1ced59d622bce66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11966
Autosubmit: Ilan Joselevich <personal@ilanjoselevich.com>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Disable the progressbar on default and provide a interface for
optionally enabling the progressbar.
Change-Id: I0e31b1957e80cf64a8dcf65c6ceb3713975b8220
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11861
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Simon Hauser <simon.hauser@helsinki-systems.de>
Provide a new interface for forcing a flush of otlp traces and use this
interface to shutdown otlp prior to exiting tvix-store, either if the
tool was stopped with a SIGTERM or ended regularly.
This also fixes an issue where traces were not even exported if for
example we just imported 10 paths and never even emitted more than 256
traces. The implementation uses a mpsc channel so a flush can be done
without having to wait for it to complete. If you want to wait for a
flush to complete you can provide a oneshot channel which will receive a
message once flushing is complete.
Because of a otlp bug `force_flush` as well as
`shutdown_tracer_provider` need to be executed using `spawn_blocking`
otherwise the function will deadlock. See
https://github.com/open-telemetry/opentelemetry-rust/issues/1395#issuecomment-1953280335
Change-Id: I0a828391adfb1f72dc8305f62ced8cba0515847c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11803
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: Simon Hauser <simon.hauser@helsinki-systems.de>
Introduce a new common crate that contains tracing boilerplate which then
can be used in the cli, tvix-store and tvix-build crates.
It has otlp as an optional feature, which is currently only used by
tvix-store.
Change-Id: I41468ac4d9c65174515d721513b96fea463d6ed2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11758
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Simon Hauser <simon.hauser@helsinki-systems.de>
Closes: https://b.tvl.fyi/issues/401
With this change all crate features (and their combinations) will be built and
tested in CI.
From now on, when adding/removing a Cargo feature for a crate,
you will want to add it to the features power set that gets tested in CI.
For each crate there's a default.nix with a `mkFeaturePowerset` invocation,
modify the list to include/remove the feature.
Note that you don't want to add "collection" features,
such as `fs` for tvix-[ca]store or `default`.
Change-Id: I966dde1413d057770787da3296cce9c1924570e0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11717
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
If building tvix-build with the tonic-reflection feature, it needs
to import `tvix_castore::proto::FILE_DESCRIPTOR_SET`, which is only
available if tvix-castore is built with the `tonic-reflection` feature.
Change-Id: I355b4c5b4c1333d5cc56335de47ad5d2f1db6337
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11716
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Drop the (unused) feature flags here, and get rid of some crate
dependencies.
Change-Id: Id64852b498725467d56abb12b548301cfba6a760
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11678
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This has already been dropped for tvix-store, drop it here as well.
Change-Id: Ib3aa37bbe9fd4c498b5ba1213f7d922d0c64ffc7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11677
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This gives multi-listener support, as well as listening on named socket
FDs.
Change-Id: I92b441f854e2faf80074463d0ca6bdc23cbd890a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11663
Tested-by: BuildkiteCI
Reviewed-by: yuka <yuka@yuka.dev>
Autosubmit: flokli <flokli@flokli.de>
… in Cargo.toml.
This gets an imperative `cargo clippy` run to pick up that config,
so `-A clippy::blocks_in_conditions` doesn't need to be explicitly
specified anymore.
Change-Id: I32b6cc50c77c22cba0d816d0db508c2f94b2c383
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11659
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: edef <edef@edef.eu>
Tested-by: BuildkiteCI
This drops pretty much all of castore/utils.rs.
There were only two things left in there, both a bit messy and only used
for tests:
Some `gen_*_service()` helper functions. These can be expressed by
`from_addr("memory://")`.
The other thing was some plumbing code to test the gRPC layer, by
exposing a in-memory implementation via gRPC, and then connecting to
that channel via a gRPC client again.
Previous CLs moved the connection setup code to
{directory,blob}service::tests::utils, close to where we exercise them,
the new rstest-based tests.
The tests interacting directly on the gRPC types are removed, all
scenarios that were in there show now be covered through the rstest ones
on the trait level.
Change-Id: I450ccccf983b4c62145a25d81c36a40846664814
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11223
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
This bumps tonic and surrounding crates to 0.11.x.
We added support for tonic 0.11.x into tokio-listener
(https://github.com/vi/tokio-listener/pull/4), so that's bumped as well.
Change-Id: Icfade5894403228299836fefb21b2f9ae59dbebb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11156
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
`build.rs` emits rerun-if-changed statements for all proto files, as
well as all include paths we pass it.
Unfortunately, due to protobufs include path rules, we need to specify
the path to the depot root itself as an include path, at least when
building impurely with `cargo`. This causes cargo to essentially always
rebuild, as it also puts its own temporary files in there.
Unfortunately, tonic-build does not chase down to individual .proto
files that are included.
Disable emitting these `rerun-if-changed` statements for now.
This could cause cargo to not rebuild protos every time, causing stale
data until the next local `cargo clean`, but considering the protos
change not that frequently, and it'll immediately surface if trying to
build via Nix (either locally or in CI), it's a good-enough compromise.
Change-Id: Ifd279a2216222ef3fc0e70c5a2fe6f87997f562e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11157
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This starts a BuildService as a separate process, currently defaulting
to the DummyBuildService.
Change-Id: Ic206f00831641d3ffebaa44883b7dc053700b9ca
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10631
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This allows constructing a BuildService from a URI, similar to how it's
done in tvix-[ca]store.
Change-Id: Ib962b329535c6c7e378ab7ac7f4dd254366497b3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10630
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Also provide a dummy implementation that just fails on any build that's
requested.
Change-Id: I0df743a730c5331ec9ce6e97a966abe18ce067f5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10627
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Nix builds also have some other inputs, outside of inputs_dir, used in
derivations setting `passAsFile` and `__structuredAttrs`.
This extends our `BuildRequest` structure to accomodate these usecases.
Change-Id: I8de6516eb467fa48a4961d88933ebd548f131049
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10519
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
There's no need to require builds to also put their outputs in store_dir.
So rename store_dir to inputs_dir and make outputs consume paths, not
basenames.
Also document the possibility for builds to write to inputs_dir. Let's
see if we want to make this a constraint later.
Change-Id: Ib4df20afcdde2d771c269c422f04c7e95587cd0f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10447
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
- directory in which the castore input nodes are mounted
- working directory for the build command
- scratch paths
- network access y/n
- whether a (static) /bin/sh should be provided
Populate these fields appropriately, and extend the tests in tvix-glue
with a FOD example.
Change-Id: I4f9de1483d6696d74694a09784910c407acb0be0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10412
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Break up the go-bindings derivation. Keep "protos" containing all proto
files (well, and the buf config), and use it for a check phase running
linter and formatter, as well as the existing "go-bindings" attribute
Change-Id: I52cb9d08570bb76452acb831eb711c5b6c0eacfb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10239
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This function converts from a nix_compat::derivation::Derivation to
a BuildRequest.
In addition to the Derivation itself, it needs two lookup functions to
map input paths to their castore nodes.
Change-Id: I0332982f0bc7933a5fda137fe39d5a850639d929
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10236
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This adds the tvix-build crate, currently only containing a
`tvix_build::proto` module, exposing the data structures defined in
tvix/build/protos.
Change-Id: I75f5d9196969ed0877b1fe640cacfecba0fb2e03
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10235
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
