When pushing a large chain of CLs, builds can fail with OOM issues as
many Nix evaluations of the depot are happening simultaneously.
To work around this, we limit the concurrency of simultaneous Nix
evaluations (i.e. the `:llama` step). This can slow down the start of
builds in a large chain of small changes, but that is a better
tradeoff than failing the builds entirely and making people click
buttons.
Change-Id: If351aaad22d52e2bcf871377f22ab1df594c518d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7501
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This is a follow up to cl/7191 which neglected to adjust the
status.tvl.su.nix module and re-enable it.
Change-Id: Icc1917004cd50e5eab61a29bc68b393ba9bd6325
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7226
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Uncomment and update the grafana config for whitby based on the new
config format that nixos accepts. I've validated this locally by
visually inspecting the resulting `ini` file, but not actually run it
yet.
Change-Id: I12d78ae48146e1b01bd2a4152276d4c6b16c1a3d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7191
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
* //ops/machines/whitby: Disable grafana, since the grafana module was
changed upstream in a way that our configuration no longer works.
Since the OpenSSL security update is relatively pressing, adapting the
grafana configuration beforehand is not a hard requirement. See
https://github.com/NixOS/nixpkgs/pull/191768.
* //tools/depotfmt: keep Go at version 1.18 to forgo a reformat of the
tree.
* //nix/buildGo: keep Go at version 1.18, as 1.19 changed the CLI
interface (?) in a way that breaks buildGo.
* //3p/overlays/tvl: drop upstreamed tdlib upgrade.
* //3p/overlays/tvl: patch buf to work around breakage due to git 2.38.1
TODO items for Go are tracked in b/215.
Change-Id: Ie08fef49cf3db12e6b5225a8b992a990ddc5b642
Reviewed-on: https://cl.tvl.fyi/c/depot/+/7141
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
This is already allowed de facto, since there seems to be a special
exception for reading from derivation outputs. What is forbidden, is
access to files imported to the store (even via builtins.toFile) and
derivation files. The latter is required for doing dependency analysis
on arbitrary derivations, unfortunately.
Access to the store allows kind of evil things, but it should
be (hopefully) hard to do this by accident, and accessing derivation
files is not impure, though it relies on store implementation internals
so to speak.
Change-Id: I33a7de83ef0ee20a7076690329d62f6caffffe5f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6835
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Upstream nixpkgs removed a lot of aliases this time, so we needed to do
the following transformations. It's a real shame that aliases only
really become discoverable easily when they are removed.
* runCommandNoCC -> runCommand
* gmailieer -> lieer
We also need to work around the fact that home-manager hasn't catched
on to this rename.
* mysql -> mariadb
* pkgconfig -> pkg-config
This also affects our Nix fork which needs to be bumped.
* prometheus_client -> prometheus-client
* rxvt_unicode -> rxvt-unicode-unwrapped
* nix-review -> nixpkgs-review
* oauth2_proxy -> oauth2-proxy
Additionally, some Go-related builders decided to drop support for
passing the sha256 hash in directly, so we need to use the generic hash
arguments.
Change-Id: I84aaa225ef18962937f8616a9ff064822f0d5dc3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6792
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: wpcarro <wpcarro@gmail.com>
For some reason Terraform decided that it would otherwise like
to *delete* this configuration, which is undesirable.
Note that there is a "magic" special behaviour when the `alias` and
`provider_id` are set to the name of a built-in supported
provider (github, gitlab etc.), which lets us skip the
authorization_url setup.
Change-Id: Ib66154c2896dda162c57bdc2d7964a9fa4e15f20
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6706
Tested-by: BuildkiteCI
Reviewed-by: lukegb <lukegb@tvl.fyi>
I think these were set up in the UI and previously not supported in
the Terraform config, now they're supported and Terraform wanted to
delete them ...
Change-Id: I83eb49ceb774ac835dc81638f962e937c7e936c6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6707
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: lukegb <lukegb@tvl.fyi>
I could not get nginx to serve it from `tvl.su/tvixbolt`, and ran out
of interest in trying to fix it, so lets put it on a subdomain
instead.
Change-Id: I1313d75cc9831d94a894191376534b1e5186a76a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/6537
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
otherwise posting this to reddit's /r/russian is not possible, as they
ban all links to Russian-affiliated sites
Change-Id: I8d23f0961ec7ef097fc2dbdd0aaa178861a19c10
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5992
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
instead of setting a wildcard record (which causes really weird
behaviour if you set your search domain to tvl.su/tvl.fyi, which I
do), DNS records for services running on whitby are now set
explicitly.
Change-Id: Ia05399b62dad326942fe0efda30782ce153df99d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5961
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
at some point in the far past, there was an RSS feed at `/en/rss.xml`.
It seems to still get a single hit or so every hour, which currently
404s.
Change-Id: Ieb13c2c0232861a50a54bc2a4087d9ccb21185cf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5962
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
on whitby, cgit runs as the gerrit user to get access to serving
gerrit's repositories directly.
on other machines (e.g. sanduny) this isn't necessary, as we have a
world-readable depot replica.
Change-Id: Ibf7e7cc08e5909e0fa182e561ab0cb472188edcb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5932
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
this configures gerrit's built-in replication plugin to push every
change in depot to sanduny.
this allows us to serve a replica of depot from sanduny.
manual config that was needed which needs to be automated:
* system-wide known_hosts does not work, needed one in /var/lib/git
* .ssh/config MUST be present and configured for sanduny.tvl.su
Change-Id: Iba399f2328abb5acb65dae19a36e265eea0952ac
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5915
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
This module sets up a user with an SSH key and permissions to receive
a (pushed) replica of depot from Gerrit.
This still needs appropriate configuration in Gerrit's replication
plugin on the other end.
This module has been enabled for sanduny. For now it does not (yet)
configure git serving.
Change-Id: I0fb6f7e696609e71008308e855bdf305dcbcd4f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5913
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
It occured to me yesterday that with the config inside of the module
it is kind of difficult to test cgit locally.
This moves it back to a separate location (//web/cgit-tvl) and makes
the most important things configurable via overrides.
Change-Id: I9b0f4c60b75c31441e1718e63b5b55aba3100aae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5893
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Before this commit besadii only worked for repos having
'refs/heads/canon' as main branch.
Change-Id: Ia2ceb8a720c675be84bc3d81b89338522cea6ebd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5862
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: asmundo <asmundo@gmail.com>
Remove a workaround for a GleSYS provider bug that was fixed in the
last release.
Change-Id: Ibd25de0b4dcccd781518d5d0ae1c75d296f6b05f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5845
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
In order to run this the secrets needs to be sourced, e.g.:
eval $(age --decrypt -i ~/.ssh/id_ed25519 $(git rev-parse --show-toplevel)/ops/secrets/tf-buildkite.age)
Change-Id: I9f6a02c0dac22f584181635861ddbb06cf849f14
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5838
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
This is in preparation for a subsequent CL that will do much more
significant changes in //nix/buildkite.
Change-Id: I80a8d67d3a7d593854c8d711572483c2581e7881
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5824
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
Tested-by: BuildkiteCI
This is a less invasive way to achieve the same goal as cl/5681, by
preventing the already existing nixpkgs store path from being dumped
again at the call site. To support nixpkgsBisectPath, we simply check if
pkgs.path is below builtins.storeDir and use builtins.storePath based on
that.
This is actually similar to the approach taken in the nixpkgs
documentation system which tries to limit the amount of nixpkgs that
needs to be dumped by using filterSource on specific subtrees of
nixpkgs. For this to work it has to insist on pkgs.path being an
ordinary Nix path, though.
Change-Id: Idf892f90a5d811184568e4702a901c334d56210e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5787
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Buildkite can't handle more than one filter for the query; as of the
last commit it just returned an empty list.
I've verified with curl based on the request the previous attempt
constructed that this works as intended with only setting the commit.
Behaviour is probably undefined if there are two builds for the same
commit (i.e. a retry). Which one will you see? Who knows!
However, since the commit hash contains the Change-Id, we can't get a
situation where the build was for two different CLs at the same
commit. Gerrit wouldn't allow that.
Change-Id: I0dcd0ff44c28d3d15cba23461970bfc8483f4e48
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5768
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This became an "official" module and dropped the `pw-` prefix.
Relates to b/184
Change-Id: I963f83b55b83015b022ab1b8330ea710d2258631
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5751
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
Named after the Mexican restaurant, El Tarasco, in El Porto, which I live 3m
walking distance from.
Change-Id: I2cd4b68eaa974ad6c8fec73e0566bc0b831c57a8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5743
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
The patchsetSha is one of the things passed in to the `fetch()`
interface, and Buildkite's API (now?) supports filtering by the commit
hash in addition.
With this combination, we should not accidentally display builds for
the wrong patch set.
Change-Id: I6bb26dd7387f2dd00291990cadd38629ecda999b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5702
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
When Keycloak and oauth2_proxy are restarted simultaneously, the
latter might try to come up (repeatedly!) before Keycloak can serve it
properly.
This leads to systemd considering the unit failed.
Since this all happens in the span of a second or so, slightly
increase the restart delay of the service to ensure it comes back
after Keycloak is ready.
A "proper" fix might be to add a script that runs before the actual
service and waits for Keycloak, but I don't want to prioritise that
right now.
Change-Id: I4dadba686de60ffc103fe889ce19f05ca1d7d4fe
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5695
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Somehow this ended up generating an empty file, with this change it is
fine again. I was looking at the recent commits of the module in
nixpkgs but couldn't quite figure it out, there are also some vague
references to the attribute set key being used as a hostname, but this
doesn't seem to be true in practice.
To be clear, the previous code was wrong, but at some point it
generated a file that accidentally worked.
Change-Id: I42d55730c09daafe6d6fe0eb3647135e84737bca
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5670
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
libdigidocpp is a dependency of qdigidoc4(1) already.
This will need https://github.com/NixOS/nixpkgs/pull/174055
"libdigidocpp: Fix PKCS11 module library path" to work, though.
Change-Id: Ic8d671077977b1d1f099a8b4b23cc537b52aa954
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5647
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: tazjin <tazjin@tvl.su>
The new version brings the new secretsDir setting which means we no
longer have to hardcode /run/agenix everywhere.
Change-Id: I4b579d7233d315a780d7671869d5d06722d769fa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5646
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
I've only been a couple months lurking in the IRC ...
Change-Id: Idebf96d3bf1124f0a97e11e0f854e8c6d4be8d8e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5662
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Nixery is going to gain a new binary (used for building images without
a registry server); to prepare for this the server binary has moved to
cmd/server and the Nix build logic has been updated to wrap this
binary and set the required environment variables.
Change-Id: I9b4f49f47872ae76430463e2fcb8f68114070f72
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5603
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
This is my new Huawei MateBook X.
Change-Id: I32a8b77dd8f53b3c89bf63f448cd2880f9a457b7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5554
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Firefox users can add p11-kit-proxy (or other SecurityDevices)
system-wide, by making use of the extraPolicies functionality.
Change-Id: Id58b6cab425199fb0e09e846db2a86d302c0de0d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5534
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Changes:
* updated keycloak configuration for new version
* migrate to emacs28 outside of //users, re-add emacs27 but with a
warning attached urging people to migrate
Change-Id: I3e5765a63934541f72f6c4a8673d3b4671850c93
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5501
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Cleans up a whole bunch of things I wanted to get out of the door
right away:
* depot internal references to //third_party/nixery have been replaced
with //tools/nixery
* cleaned up files from Github
* fixed SPDX & Copyright headers
* code formatting and inclusion in //tools/depotfmt checks
Change-Id: Iea79f0fdf3aa04f71741d4f4032f88605ae415bb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5486
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
ava is my new (NixOS!) work machine :)
Change-Id: I1f089f00c02519d5d1d93d011f29075d53500e74
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5450
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: wpcarro <wpcarro@gmail.com>
Tested-by: BuildkiteCI
Someone already packaged the required software, so I didn't have to do
that.
Change-Id: Ifc6a68fd4cd89f4718368a05acb6c6f536e01aab
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5431
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: tazjin <tazjin@tvl.su>
If the Keycloak service is running on the same machine as the oauth2
proxy (spoiler alert: it is!), let the service depend on it.
Change-Id: I30e4222b4cd5589e08849ef6f37cf1fb4369f55a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5421
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: sterni <sternenseemann@systemli.org>
For external users of the pipeline construction, the token might be in
a different path than `/run/agenix/buildkite-graphql-token`.
It is made configurable through the BUILDKITE_TOKEN_PATH environment
variable. This should be configured on the pipeline level to apply to
all steps.
Change-Id: I23c52e2d705e4134b8b013f8603f92e5533a6e44
Reviewed-on: https://cl.tvl.fyi/c/depot/+/5424
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: asmundo <asmundo@gmail.com>
