This is not a stream of direntries anymore, but a stream of ingestion
entries.
Change-Id: I387f4497b6567066b24c58ca0262e710348180e9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11485
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Previously the store ingestion code was coupled to `walkdir::DirEntry`s
produced by the `walkdir` crate which made it impossible to reuse
ingesting from other sources like tarballs or NARs.
This introduces a `IngestionEntry` which carries enough information for
store ingestion and a future for computing the Blake3 digest of files.
This allows the producer to perform file uploads in a way that makes
sense for the source, ie. the filesystem upload could concurrently
upload multiple files at the same time, while the NAR ingestor will need
to ingest the entire blob before yielding the next blob in the stream.
In the future we can buffer small blobs and upload them concurrently,
but the full blob still needs to be read from the NAR before advancing.
Change-Id: I6d144063e2ba5b05e765bac1f27d41b3c8e7b283
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11462
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This adds `Directory::add` which is a convenience helper for adding
nodes into a `Directory` while preserving sorted order.
This implements `Ord` and `PartialOrd` for `FileNode`, `SymlinkNode`,
and `DirectoryNode` so `binary_search` can be used.
Change-Id: I94b86bdef5d0da55aa352e098988b9704cafca19
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11481
Autosubmit: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This is especially nice, as it allows us getting rid of the other
versions of proc-macro2 and quote.
Change-Id: I9fdd012ee6c0ded3e18ec30504b83ac2032d1390
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11474
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Also, rename the DUMMY_NAME constant in the fixtures to DUMMY_PATH,
which aligns more with the ToString representation and from_bytes
conversions we have on StorePath[Ref].
Change-Id: I39763c9dfa84c5d86f2fd0171b3a4d36fd72f267
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11464
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Create a (currently unused) table to store information about users. I'll
be manually migrating over all the information about users into this
table, then will make a subsequent CL to make the rest of the tables
foreign-key into this table
Change-Id: I1b1c4b50c4a61326df3382809f701947a2caf536
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11411
Autosubmit: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
io/ioutil is deprecated, and the range expression can be simplified.
Change-Id: I73b85991faafa333bddf90adbdefe2006f8d409c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11460
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
There's no point in not enabling these, and rust-analyzer is quite
useless too.
nix-compat users outside of here can still explicitly disable default
features if they don't want to pull in these features.
Change-Id: I8f2f24e7734ad152d1733bc3421098fc91af290a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11455
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
This relates to nixery#167.
Using our GC module is much more reliable than what we were doing previously.
Change-Id: I1956457812a3a847a7c8a1f4e7e91e50fad08ac0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11453
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
I accidentally deallocated the previous public IP, and had to make a
new one :(
Change-Id: Ie30305bdfdb8443e058270e5324baf555343441c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11452
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
This makes use of the vmCmdline and assertVMOutput to boot a NixOS VM
off of `tvix-store virtiofs` have it write a message on successful
bootup, then have it shut down again.
We check we see the message in the output.
Seeding the store with the closure it's what's currently taking most
of the time (as it's all linear still), so log a message before booting
the VM.
Change-Id: I6887d935f589eb0ad6507033c01337e1ec500a0b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11191
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Userland likes to seek backwards, and until we have store composition
and can serve chunks from a local cache, we need to buffer the
individual chunks in memory.
Change-Id: I66978a0722d5f55ed4a9a49d116cecb64a01995d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11448
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This makes it easier to separate concurrent requests on the same inode.
Change-Id: I7637c1d889336beeb0d186182ce22fbf60fd16c3
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11447
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
The docs state we must fill all of the buffer, except on EOF.
Change-Id: Id977ba99c0b15132422474ebbf82bb92b79d55ba
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11446
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
When (re)initializing a chunked reader, we were erroneously skipping the
first n bytes from all chunks, not just the first one.
Fix this, by passing in an enumerated list of chunks, and only calling
SeekFrom::Start() on the first chunk in the stream.
With this, I'm able to invoke b3sum on bin/bash successfully.
Change-Id: I52ea480569267e093b0ac9d6bcd5c2d1b4db25f7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11443
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Increase the discard_buf to 4096 (as I've seen this size).
Use the ready! macro to propagate pendings.
Make it more clear what exactly should be skipped in total, and what
during the current iteration.
Also write down that poll_read call already takes care of updating
self.pos, as I ran into that trap earlier (and added it here).
Change-Id: I2d22e1c8a835c0f3dd0c648917009b2bad4fd57c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11442
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
If the resulting offset equals to our current position, there's no need
to recreate a reader.
Change-Id: I855f0c79c514c16ca48a78e12978af2835fbbd6a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11441
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Want to get a few more signups than we allocated, in case somebody
drops out.
Change-Id: I832c4fdfa900f117092f5f7e8a5d8b7d256a94e5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11450
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Most of the steps in our buildkite pipeline build derivations without
doing anything else. A lot of those derivations depend on each other.
Consequently, buildkite will schedule builds of derivations whose
dependencies are still in the process of being built. The result is many
buildkite agents doing nothing but blocking on other derivations being
built. We can easily prevent this by using the dependency information we
can get from the derivation (files) of the targets we want to build and
translating them into buildkite step dependencies.
The hard part of this has already been done for a while:
//nix/dependency-analyzer finds the dependencies between a list of
“known” derivations (even if they only depend on each other through
intermediate derivations) without depending on a specific derivation
builder convention, but rather relying on `.drv` files. It still has a
few rough edges, but has been working reliably for our purposes.
Since our steps are identified by derivation hashes, we can just
directly use the available dependency data. Luckily, buildkite seems to
just takes a step as if it was completed if it is skipped, so we don't
even have to check whether dependencies have been skipped or not.
On whitby it seems that the dependency analysis costs about a minute
additionally (which is how long it takes to run
//nix/dependency-analyzer in isolation just about).
Supersedes cl/5063, cl/5060, cl/5064 and cl/5065.
Change-Id: I91d2eb2b43d60811cac0d26fa94467298f622970
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11116
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
This will make it easier to emit intra pipeline dependencies based on
the dependencies between derivations contained therein later.
A consequence of this change is that it is no longer possible to have
the same derivation be exposed as multiple steps in the pipeline. I
doubt that having this is very useful, though.
Keys for extraSteps are not changed significantly, but are distinguished
from derivation based steps (with prefix `drv-*`) by their prefix
`extra-step-*`.
Change-Id: I4165900e512b3967fa3ca4cd5bffd44bc15915fc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11115
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: ezemtsov <eugene.zemtsov@gmail.com>
Tested-by: BuildkiteCI
State that this case applies if the blob is small enough to fit inside a
single chunk.
Change-Id: I0383514729e686799599b629cf1303b284147bb4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11440
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
We previously returned Ok(None) when being asked for more granular
chunking info, signalling the blob does not exist at all.
This is however incorrect, we should return an empty Vec instead, as
documented in the trait.
Change-Id: I83ecc2027e0767134c7598792c2ee6d964853c66
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11439
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Autosubmit: flokli <flokli@flokli.de>
It's perfectly normal if we ask for more granular chunking info and the
backend responds it does not have it.
Change-Id: I593ab3e53b4f4e70c99f39b266546d2ac8eb10c1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11437
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
We're receiving bytes over the wire, and encode them the same way
B3Digest does internally, but don't use it for formatting, as we're
discarding that string.
In case the sent bytes don't have the right length, the string will be
short, but it's better to still have it as a field, even if it's not a
valid b3 digest.
Change-Id: I6ef08275d51c8a0d98f5e46844b15dfd05d17cd8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11436
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Looking for .drv file names in non .drv files doesn't make sense, as it
less reliably a reference in those cases. Matches behavior of the
function for Nix >= 2.6.
Change-Id: I79fc1da3e55df869f03702fa5137d030790bc4eb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11114
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: aspen <root@gws.fyi>
These were copying unnecessarily. Instead, have a
InodeData::from_node(), which *consumes* the Node entirely, returns
`InodeData` and the split-off name (which is not part of InodeData).
Callers can then use the result in various helper functions, like:
- InodeData::as_fuse_type
- InodeData::as_fuse_file_attr
- InodeData::as_fuse_entry
… to prepare their replies to the kernel.
This removes not only a bunch of clones, but also a lot of copy-pasted
code.
Change-Id: Idbca5f25cc29e96c1f4c614b33dff2becb0a8738
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11435
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Connor Brewster <cbrewster@hey.com>
