Instead of enforcing NAR SHA256 all the time, we generalize the
`PathInfo` constructor to take a `CAHash` argument which can drive
whether we are having a flat, NAR or text scheme.
With this, it is now possible to implement flat schemes in our
evaluation builtins, e.g. `builtins.path`.
Change-Id: I15bfee0ef4f0f428bfbd2f30c57c012cdcf6a976
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11286
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Derivation that depends on `${d.drvPath}` generates a `NixContextElement::Derivation(drvPath)` context string.
In turn, this makes the dependent derivation depend on *ALL* outputs of that derivation.
Note that a dependency on `${d.drvPath}` generates an input source
dependency too.
This is a complete implementation of the context string system in Nix on
the "input population" side.
The test coverage of this change is taken care in cl/11264.
Change-Id: I97fe5f7c772a6b1cc4366bee071aa691a11fcde6
Signed-off-by: Ryan Lahfa <tvl@lahfa.xyz>
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11261
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Make this function async, and do the block_on on the (single) callsite.
Change-Id: Ib8b0b54ab5370fe02ef95f38a45d8866868a9d60
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11285
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
Replace the (single) callsite with some code interacting with the tokio
runtime to block on the async version.
Change-Id: I3976496ae77b2bb8734603f303655834265e3f0a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11284
Tested-by: BuildkiteCI
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Let's get rid of these sync helpers, they make this less understandable.
Change-Id: I3c7294647849db2747762722247c65e4e2947757
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11283
Reviewed-by: Connor Brewster <cbrewster@hey.com>
Tested-by: BuildkiteCI
The outer fingerprint used for store path calculation is always a sha256
digest. This includes both input and output-addressed store paths.
We used a NixHash here, which can also represent other hash types, and
that had a bunch of annoyances:
- Whenever we had the bytes, we had to wrap them in a NixHash::Sha256().
- Things like AtermWriteable had to be implemented on NixHash,
even though we then had an assertion it was only called in the
NixHash::Sha256 case.
Change-Id: Ic895503d9b071800d2e52ae057666f44bd0ab9d6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11142
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: John Ericson <git@johnericson.me>
Reviewed-by: picnoir picnoir <picnoir@alternativebit.fr>
Add a new AsyncRead wrapper, DecompressedReader, that wraps an
underlying AsyncRead, but sniffs the magic bytes at the start of the
stream to determine which compression format is being used out of the
three that are supported by builtins.fetchTarball, and switches to the
correct decompression algorithm adapter dynamically.
This will be used in the implementation of builtins.fetchTarball
Change-Id: I892a4683d5c93e67d4c173f3d21199bdc6605922
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11019
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Implement the fetchurl builtin, and lay the groundwork for implementing
the fetchTarball builtin (which works very similarly, and is implemented
using almost the same code in C++ nix).
An overview of how this works:
1. First, we check if the store path that *would* result from the
download already exists in the store - if it does, we just return
that
2. If we need to download the URL, TvixStoreIO has an `http_client:
reqwest::Client` field now which we use to make the request
3. As we're downloading the blob, we hash the data incrementally into a
SHA256 hasher
4. We compare the hash against the expected hash (if any) and bail out
if it doesn't match
5. Finally, we put the blob in the store and return the store path
Since the logic is very similar, this commit also implements a *chunk*
of `fetchTarball` (though the actual implementation will likely include
a refactor to some of the code reuse here).
The main thing that's missing here is caching of downloaded blobs when
fetchurl is called without a hash - I've opened b/381 to track the TODO
there.
Adding the `SSL_CERT_FILE` here is necessary to teach reqwest how to
load it during tests - see 1c16dee20 (feat(tvix/store): use reqwests'
rustls-native-roots feature, 2024-03-03) for more info.
Change-Id: I83c4abbc7c0c3bfe92461917e23d6d3430fbf137
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11017
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: aspen <root@gws.fyi>
To pave the way for adding a new error type for builtins in this crate,
move DerivationError to a new builtins::errors module.
Change-Id: I65fcad63e43ed40ad39c2c6540a2ab80fdd90fd4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11016
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: aspen <root@gws.fyi>
Previously, Nix strings were represented as a Box (within Value)
pointing to a tuple of an optional context, and another Box pointing to
the actual string allocation itself. This is pretty inefficient, both in
terms of memory usage (we use 48 whole bytes for a None context!) and in
terms of the extra indirection required to get at the actual data. It
was necessary, however, because with native Rust DSTs if we had
something like `struct NixString(Option<NixContext>, BStr)` we could
only pass around *fat* pointers to that value (with the length in the
pointer) and that'd make Value need to be bigger (which is a waste of
both memory and cache space, since that memory would be unused for all
other Values).
Instead, this commit implements *manual* allocation of a packed string
representation, with the length *in the allocation* as a field past the
context. This requires a big old pile of unsafe Rust, but the payoff is
clear:
hello outpath time: [882.18 ms 897.16 ms 911.23 ms]
change: [-15.143% -13.819% -12.500%] (p = 0.00 < 0.05)
Performance has improved.
Fortunately this change can be localized entirely within
value/string.rs, since we were abstracting things out nicely.
Change-Id: Ibf56dd16c9c503884f64facbb7f0ac596463efb6
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10852
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: aspen <root@gws.fyi>
This reverts commit d9565a4d0a.
Reason for revert: this was intentional - putting Rc::clone instead of
.clone is a common Rust idiom, and makes it explicit that we're cloning
a shared reference, not an underlying resource
Change-Id: I41a5f323ee35d7025dc7bb02f7d5d05d0051798d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10995
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
With our values using bstr now, we're not restricted to only reading
files that contain valid UTF-8.
Update our `read_to_string` function to `read_to_end`
(named like `std::io::Read::read_to_end`), and have it return a Vec<u8>.
Change-Id: I87f0291dc855a132689576559c891d66c30ddf2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/11003
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: Pádraic Ó Mhuiris <patrick.morris.310@gmail.com>
Reviewed-by: flokli <flokli@flokli.de>
...in `Derivation`.
This is more type-safe and should consume less memory.
This also removes some allocations in the potentially hot path of output hash calculation.
https: //b.tvl.fyi/issues/264
Change-Id: I6ad7d3cb868dc9f750894d449a6065608ef06e8c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10957
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: Peter Kolloch <info@eigenvalue.net>
Reviewed-by: Peter Kolloch <info@eigenvalue.net>
We add a new set of builtins called `import_builtins`, which
will contain import-related builtins, such as `builtins.path` and
`builtins.filterSource`. Both can import paths into the store, with
various knobs to alter the result, e.g. filtering, renaming, expected
hashes.
We introduce `filtered_ingest` which will drive the filtered ingestion
via the Nix function via the generator machinery, and then we register
the root node to the path info service inside the store.
`builtins.filterSource` is very simple, `builtins.path` is a more
complicated model requiring the same logic albeit more sophisticated
with name customization, file ingestion method and expected SHA-256.
Change-Id: I1083f37808b35f7b37818c8ffb9543d9682b2de2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10654
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
All these functions have an Rc of Rc<TvixStoreIO> or Rc<dyn StoreIO>, so
we can call io.clone() directly.
Change-Id: I96a5bcb9af4aca93892cb72bcfaf14540da52381
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10989
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Initialize a new empty builtins module `fetcher_builtins`, which will
contain the builtins which fetch URLs from the internet:
* fetchurl
* fetchGit
* fetchTarball
* fetchTree (maybe? this is experimental)
These builtins are all implemented in CPP nix at:
https://github.com/NixOS/nix/blob/2.20.2/src/libexpr/primops/fetchTree.cc
These builtins are added to the evaluation context using a similar
mechanism to the derivation builtins, and have been added everywhere
derivation builtins were previously being added.
Change-Id: I133b91cc9560f23028621414537f712e7bd8a825
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10974
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
That's one possible abstraction to drive builds.
Whenever IO into a store path is requested, we look up the root node,
and in case we don't have it in PathInfoService, but KnownPaths gives us
a Derivation for that output path, trigger a build and await the result.
This recursively might trigger builds for parent paths if they haven't
been built yet.
Another option would be to simply expose a PathInfoService interface for
a builder too, and loop all building into IO via PathInfoService
composition - but let's start with something.
Note tvix-cli doesn't have a configurable BuildService yet, it's plugged
to the DummyBuildService, so whenever it needs to do a build, it'll fail,
but that's how it can be provoked:
```
(builtins.readFile (import <nixpkgs> {}).hello.outPath + "/bin/hello")
[…]
error[E029]: I/O error: /nix/store/cg8a576pz2yfc1wbhxm1zy4x7lrk8pix-hello-2.12.1: builds are not supported with DummyBuildService
--> [code]:1:2
|
1 | (builtins.readFile (import <nixpkgs> {}).hello.outPath + "/bin/hello")
| ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
```
Note how this fails, while pure output path calculation
(`(import <nixpkgs> {}).hello.outPath + "/bin/hello")`) still succeeds.
Change-Id: Id2075d8a2b18554d0dd608b4b29146a8cd411e7f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10793
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
This causes a bit too much spam otherwise.
Change-Id: If3ced9ddfee7f49453711cd26469d1eb81983c71
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10953
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
Print store paths with their ToString implementation for brevity, and
don't log the sucessful return value of read_to_string.
Change-Id: I01b6838398acd66b8818095622f361fcca26fa77
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10854
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Passing a StorePathRef is annoying if we only (already) have a
StorePath.
Change-Id: Ic3b36c0041707230515a6745a57f0d25b2bafd16
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10948
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: Peter Kolloch <info@eigenvalue.net>
We need to not only store a map from drv path to hash derivation modulo,
but also keep the original Derivation struct - because we'll use that
later to trigger builds.
Change-Id: I78e2e8431ab5ae853188866b797a79025200de98
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10790
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This is now the only enum variant for Value that is larger than 8
bytes (it's 16 bytes), so boxing it (especially since it's not
perf-critical) allows us to get the Value size down to only 16 bytes!
Change-Id: I98598e2b762944448bef982e8ff7da6d6683c4aa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10798
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: aspen <root@gws.fyi>
Storing a full BString here incurs the extra overhead of the capacity
for the inner byte-vector, which we basically never use as Nix strings
are immutable (and we don't do any mutation / sharing analysis).
Switching to a Box<BStr> cuts us from 72 bytes to 64 bytes per
string (and there are a lot of strings!)
Change-Id: I11f34c14a08fa02759f260b1c78b2a2b981714e4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10794
Autosubmit: aspen <root@gws.fyi>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
NixString is *quite* large - like 80 bytes - because of the extra
capacity value for BString and because of the context. We want to keep
Value small since we're passing it around a lot, so let's box the
NixString inside Value::String to save on some memory, and make cloning
ostensibly a little cheaper
Change-Id: I343c8b4e7f61dc3dcbbaba4382efb3b3e5bbabb2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10729
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
C++ nix uses C-style zero-terminated char pointers to represent strings
internally - however, up to this point, tvix has used Rust `String` and
`str` for string values. Since those are required to be valid utf-8, we
haven't been able to properly represent all the string values that Nix
supports.
To fix that, this change converts the internal representation of the
NixString struct from `Box<str>` to `BString`, from the `bstr` crate -
this is a wrapper around a `Vec<u8>` with extra functions for treating
that byte vector as a "morally string-like" value, which is basically
exactly what we need.
Since this changes a pretty fundamental assumption about a pretty core
type, there are a *lot* of changes in a lot of places to make this work,
but I've tried to keep the general philosophy and intent of most of the
code in most places intact. Most notably, there's nothing that's been
done to make the derivation stuff in //tvix/glue work with non-utf8
strings everywhere, instead opting to just convert to String/str when
passing things into that - there *might* be something to be done there,
but I don't know what the rules should be and I don't want to figure
them out in this change.
To deal with OS-native paths in a way that also works in WASM for
tvixbolt, this also adds a dependency on the "os_str_bytes" crate.
Fixes: b/189
Fixes: b/337
Change-Id: I5e6eb29c62f47dd91af954f5e12bfc3d186f5526
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10200
Reviewed-by: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
Sometimes, Nix lets someone customize the `name` in the store for a
path, this is the case for `builtins.path` which takes a `name`
argument, we leave it to the caller to choose the name, which can be the
basename by default of the path.
Change-Id: Icdbf71d1d8f2dca5716b99d20aac885aab905b80
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10653
Tested-by: BuildkiteCI
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Reviewed-by: flokli <flokli@flokli.de>
Add multiple additional helpers such as:
- `path_to_name`: derive the basename of a given path
- `derive_nar_ca_path_info`: derive the `PathInfo` for a content
addressed NAR
which isolates further the tree walking feature and the ingestion feature.
Additionally, we don't `expect` anymore and propagate properly ingestion errors up.
Change-Id: I60edb5b633911c58ade7e19f5002e6f75f90e262
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10574
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Impure builtins need to be explicitly added. This was missed from
cl/10640.
Change-Id: I1f8a84aa02f1cf8a26247960d6eb15895e09c610
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10667
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
- Adjust to ecl 23.9.9 release
- Regenerate go protos after protoc-gen-go update
- Drop dhall fork which hasn't kept up with 1.42.*
- Address new clippy warnings:
- Variant naming of Error::ValidationError
- Simplify .try_into().unwrap()
- Drop unnecessary identity function
- Test module must be last in file
- Drop unused `pub use`
- Update agenix to 0.15.0. Current master has a installCheckPhase that
doesn't work with C++ Nix 2.3.*:
a23aa271be (commitcomment-137185861)
Change-Id: Ic29eef20d6fd1362ce1031364a5ca6b4edf195bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10615
Reviewed-by: aspen <root@gws.fyi>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
TvixStoreIO triggers builds whenever IO into a not-yet-built store path
is requested, if it knows how to build that path.
Change-Id: If30e9db6be2f2a30cbc9d0576f357f3ecfa0d35a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10645
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
We propagate a `TvixStoreIO` as the `state` of our derivation-specific
builtins in the glue crate.
The evaluators `io_handle` itself is using a Rc<dyn EvalIO>.
An earlier version of TvixStoreIO was also introducing generics over the
different internal services themselves, but we opted for instead
hardcoding this to Arc<dyn …> for the sake of less macro voodoo.
Change-Id: I535c476f06b840858fa3070c4a237ece47f7a15b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10636
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Don't restrict to a Box<dyn EvalIO>.
There's still one or two places where we do restrict, this will be
solved by b/262.
Change-Id: Ic8d927d6ea81fa12d90b1e4352f35ffaafbd1adf
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10639
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
This is an additional test suite on the top of the Nix ones
for context strings matters.
It already smoked out multiple mistakes and potential bugs and non-deterministic result from the evaluator.
It uses a similar technology as the one in the tvix-eval albeit we instantiate a fully fledged evaluator
with in-memory store.
We copy the files instead of symlinking them because crates are built in
isolation, so symlinks cannot work.
Change-Id: I63ae225ce4f83c6e2c8ccd60d779c2f8eb9d08fb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10619
Autosubmit: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Rather than passing strings around, use a StorePathRef.
This makes things a bit more typesafe, and more aligned with what we
want to do in b/264.
Change-Id: Ib7080addf27e7f1a9c8da1d8aaa66744468e3b5a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10633
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Determining the inputs might trigger additional builds/substitutions,
so answering these lookups via a lambda in a lazy fashion gets
complicated.
You end up assembling the list of input nodes upfront, and the lambda
will just be a dumb lookup into that preassembled list.
Rather than doing that, simply have derivation_to_build_request leave
the work of determining the inputs to the caller.
Change-Id: I75880132916c76b930807c989090da298b6891bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10626
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
This are leftovers from the "reference scanning" approach (which we
didn't end up using).
We still want a concept of known paths, so we can trace IO into
storepaths back to the build recipe that'll produce it, so let's keep
the rest of this struct around.
Change-Id: I73d38e21e5b97950b8fc2a42176cae5f80d371c8
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10632
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Tested-by: BuildkiteCI
A bunch of operations in Tvix are not aware of catchable values
and does not propagate them.
In the meantime, as we wait for a better solution, we just offer this
commit for moving the needle.
Change-Id: Ic3f0e1550126b0847b597dfc1402c35e0eeef469
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10473
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
`args` was not propagating context, here's a regression test for it.
Change-Id: I8b6a3148508d40df0077128f0bafe68c098a03bd
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10610
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
This adds support to handle the __structuredAttrs argument, which can be
passed to builtins.derivationStrict.
If __structuredAttrs is passed, and set to true, most of the arguments
passed to builtins.derivationStrict are not simply coerced to a string
and passed down to "environments", but instead kept in a more structured
fashion.
Inside ATerm, which is what's relevant as far as path calculation is
concerned, a virtual `__json` environment variable is present,
containing these structured values.
Inside Builds, these structured values are not made available as an
environment variable, but a JSON file (and source-able bash script).
This will need to be respected once we start emitting BuildRequests,
and for that we can probably just parse the `__json` key in
Derivation.environment again - or keep this additionally in
non-serialized form around during Evaluation.
No matter what, this is left for a followup CL.
The existing handle_derivation_parameters and populate_outputs helper
function were removed, as __structuredAttrs causes quite a change
in behaviour, and so handling both in the same place makes it more
readable.
There's some open questions w.r.t. string contexts for structured attrs
itself. A TODO is left for this, but at least path calculation for
individual structured attrs derivations are correct now.
Part of b/366.
Change-Id: Ic293822266ced6f8c4826d8ef0d2e098a4adccaa
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10604
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
My OCD could not be stopped.
Change-Id: I2bf504fe0865a5084ad02aee18e6180a8a3e19d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10609
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
The Derivation input_derivations field contains a list of input
derivations and (a subset of their) output names.
This means, multiple nodes can be returned, so return a Vec.
Also, update the name to better reflect the nodes are the nodes of the
selected outputs, not a node representing the .drv file itself.
Additionally, use a proto::node::Node (the naked enum), rather than
proto::Node, which wraps this in an optional struct field until
realizing the BuildRequest.
Change-Id: Iec5620b5d7ac0462f2c76acac4abcaeea2de0aad
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10608
Tested-by: BuildkiteCI
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
Autosubmit: flokli <flokli@flokli.de>
Provide a store_path_to_node_sync function which uses the runtime handle
to block on the async function internally, but make store_path_to_node
itself async, so it can call async functions internally.
We'll use that later when triggering builds and waiting on their
results.
Change-Id: Idae9da7aa5b0878e0d3a2eba34ea2623e1ba84b2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/10607
Tested-by: BuildkiteCI
Autosubmit: flokli <flokli@flokli.de>
Reviewed-by: raitobezarius <tvl@lahfa.xyz>
