* //users/grfn: vendor ddclient module and package into depot
//3p/ddclient now contains the removed package expression and
NixOS module with the following changes:
- Include former uid/gid settings from ids.nix which have been removed
by upstream with the ddclient module.
- Rename to deprecate-ddclient, since it is impossible at the moment
to prevent the corresponding mkRemovedOptionModule from being
imported (https://github.com/NixOS/nixpkgs/issues/245265).
I wrote a patch for nixpkgs that would at least allow individual
mkRemovedOptionModule to be disable, but it is stuck for now:
https://github.com/NixOS/nixpkgs/pull/245274.
* //tools/magrathea:
We need to pass -host to csc due to
https://github.com/NixOS/nixpkgs/pull/246923 now. I don't fully grasp
what this means, but it works and we are hardly cross-compiling, so it
should be fine until I can get some answers from the change author.
* //3p/nixpkgs:nixos-option: provide latest Nix as input
https://github.com/NixOS/nixpkgs/pull/237442 adapted nixos-option to
API changes in Nix's libraries which means it needs to be built
against Nix 2.15, not 2.3. Let's hope it stays up to date with the
latest Nix version in the future, so we can keep this override as is.
Sadly this means that machines in depot will depend on two
versions of Nix going forward.
* //3p/nixpkgs:tdlib: update to match emacs-overlay
Change-Id: Iac4dba58a076ecf25e8647fd9a06cbabf2f7809e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/9004
Reviewed-by: grfn <grfn@gws.fyi>
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This is a bit dirty, ideally we have a single polling loop that uses
`hx-swap-oob` to fill all status fields in the table (to avoid O(n)
looping requests).
Change-Id: I78ab392964cf00e39424002fe48cb35a60af184a
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8875
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
We upstreamed some of these modules to hackage, so I can get rid of it
here.
Change-Id: I70e1e864a81029cadbbd96cc019a768728431cff
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8659
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Autosubmit: Profpatsch <mail@profpatsch.de>
Reviewed-by: sterni <sternenseemann@systemli.org>
Without this, the derivation is just called `rust-workspace-unknown`
which is - at best - a little confusing.
Change-Id: I3f50f87a411248ffcce9397a4ddb57e87abeab1c
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8923
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
in accordnace with similar renaming on other sites
(e.g. GitHub, Exozyme, chaos.social)
My experience with exozyme tells me that fully applying
this change might require manual editing of gerrits database
anyways to fix broken references/patch ownerships.
Change-Id: I024ff264c09b25d8f854c489d93458d1fce7e9f4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8919
Autosubmit: lukegb <lukegb@tvl.fyi>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: zseri <zseri.devel@ytrizja.de>
As a workaround for b/283, we are downgrading the version of Rust used
to build josh as a strange issue causing invalid memory allocation
requests occurs with Rust 1.70.0
Change-Id: I94476077eb4a8cebb82f55c20397c299ff57c0a4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8917
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
* //3p/sources: switch stable channel from 21.11 (!) to 23.05
* //users: adapt to emacsUnstable to emacs-unstable rename
* //users/grfn: use default Linux kernel version everywhere,
as 5.15 has broken in this version of nixos-unstable.
* //3p/cgit: adapt to git 2.41.0
The committed changes are the same as the [patch1] I've submitted
to cgit-pink which is in turn based on Christian Hesse's [patch2].
patch1: https://causal.agency/list/thread/20230624144033.802270-1-sternenseemann%40systemli.org.html#20230624144033.802270-2-sternenseemann@systemli.org>
patch2: https://lists.zx2c4.com/pipermail/cgit/2023-June/004843.html
Co-authored-by: Christian Hesse <mail@eworm.de>
Change-Id: I549a62e7c85c66d772edda997819a40f2d5835d7
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8855
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Reviewed-by: grfn <grfn@gws.fyi>
Also sets the `spdx` field which is specific to mkProvider and was
throwing eval warnings.
Change-Id: I37c04feb426b16f552fb0e0e2f188fd8d3bd0f03
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8836
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
* //ops/modules/depot-inbox: Adapt to upstream option type declaration.
See nixpkgs commit b6ed3b8f402893df91a8e21ce993520301c2f076.
* //ops/machines/sanduny, //users/tazjin/polyanka:
Remove boot.loader.grub.version options (no longer has any effect).
* //users/sterni/emacs: reflect rename emacsPgtk -> emacs-pgtk
* //3p/overlays: update tdlib to match emacs-overlay
* //3p/overlays: give EXWM from depot a separate name
* //users/grfn/system/home: disable Slack support in ntfy
Change-Id: I03bde088bc70e05b23925f244899807210cb7b20
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8547
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Reviewed-by: grfn <grfn@gws.fyi>
Tested-by: BuildkiteCI
Reviewed-by: tazjin <tazjin@tvl.su>
This is almost one year of changes to EXWM. Note that it undoes our
port of https://github.com/ch11ng/exwm/pull/737
That PR hasn't seen any movement in three years, so it might not be
that relevant anymore. Other stuff has been mainlined in the meantime.
Change-Id: I0845ff8a28a5bb1553855f6d6f0ceeaedcf0809e
* 3p/buzz: delete package
This is unused, old, and uses an insecure version of OpenSSL which
broke eval.
* 3p/overlays: remove nvd patch
Newer versions of nvd are compatible with Nix 2.3 by default.
* users/grfn/system/home: remove explicit rust-analyser package
This conflicts with `rustup`, causing eval failures, as the wrapper
seems to now be included in `rustup` by default.
* users/grfn/system: temporarily disable ISO builds
They were broken upstream in nixpkgs by a change to stdenv/setup.sh,
being fixed in https://github.com/NixOS/nixpkgs/pull/234883
Change-Id: I0eea99ec98f4e73e615c012ffae1d0e37122e73b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8585
Tested-by: BuildkiteCI
Reviewed-by: grfn <grfn@gws.fyi>
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: tazjin <tazjin@tvl.su>
Spell out that “may diverge” is more of a “has diverged by now”. We are
essentially maintaining a fork of mime4cl.
Change-Id: I9049e8296a666c3d1b08eae28813147f360771ef
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8621
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This function has apparently been unused ever since we imported mime4cl
into depot.
Change-Id: I224c9b2947ffd641e01e8cd5454d7a7fa75278d4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8587
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
DECODE-BASE64-STREAM-TO-SEQUENCE is the only thing that requires
anything fancy: We read into an adjustable array. Alternative could be
using REDIRECT-STREAM and WITH-OUTPUT-TO-STRING, but that is likely
slower (untested).
Test cases are kept for now to confirm that qbase64 is conforming to our
expectations, but can probably dropped in favor of a few more sample
messages in the test suite.
:START and :END are sadly no longer supported and need to be replaced by
SUBSEQ.
Change-Id: I5928aed7551b0dea32ee09518ea6f604b40c2863
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8586
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Seems simple enough to use standard LET and a few parentheses more which
stock emacs can indent probably.
Change-Id: I0137a532186194f62f3a36f9bf05630af1afcdae
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8584
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Eventually, we'll want to replace dump-stream-binary with something more
efficient—given that we have flexi-streams we can use something that
only does matching element types no problem. REDIRECT-STREAM is much
more efficient thanks to using an internal buffer.
streams.lisp gets a new section at the beginning for grouping utilities
that don't have any real (internal) dependencies.
Change-Id: I141cd36440d532131f389be2768fdaa54e7c7218
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8583
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Porting over the rest of the decoding (RFC2047) and especially encoding
over to qbase64 is still pending, as it is a little trickier.
Change-Id: Id4740eb074a387aeea2cb94b781e204248530799
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8582
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The input adapter streams were input streams yielding either binary or
character data that could be constructed from a variable data source.
The stream would take care not to destroy the underlying data
source (i.e. not close it if it was a stream), so similar to with
FILE-PORTIONs, but simpler.
Unfortunately, the implementation was quite inefficient: They are
ultimately defined in terms of a function that retrieves the next
character in the source. This only allows for an implementation of
READ-CHAR (and READ-BYTE). Thanks to cl/8559, READ-SEQUENCE can be used
on e.g. FILE-PORTION, but this was still negated by a input adapter
based on one—then, READ-SEQUENCE would need to fall back on READ-CHAR or
READ-BYTE again.
Luckily, we can replace BINARY-INPUT-ADAPTER-STREAM and
CHARACTER-INPUT-ADAPTER-STREAM with a much simpler abstraction: Instead
of extra stream classes, we have a function, MAKE-INPUT-ADAPTER, which
returns an appropriate instance of FLEXI-STREAM based on a given source.
This way, the need for a distinction between binary and character input
adapter is eliminated, since FLEXI-STREAMS supports both binary and
character reads (external format is not yet handled, though).
Consequently, the :binary keyword argument to MIME-BODY-STREAM can be
dropped.
flexi-streams provides stream classes for everything except a stream
that doesn't close the underlying one. Since we have already implemented
this in POSITIONED-FLEXI-INPUT-STREAM, we can split this functionality
into a new superclass ADAPTER-FLEXI-INPUT-STREAM.
This change also allows addressing the performance regression
encountered in cl/8559: It seems that flexi-streams performs worse when
we are reading byte by byte or char by char. (After this change mblog is
still two times slower than on r/6150.) By eliminating the adapter
streams, we can start utilizing READ-SEQUENCE via decoding code that
supports it (i.e. qbase64) and bring performance on par with r/6150
again. Surely there are also ways to gain back even more performance
which has to be determined using profiling. Buffering more aggressively
seems like a sure bet, though.
Switching to flexi-streams still seems like a no-brainer, as it allows
us to drop a lot of code that was quite hacky (e.g. DELIMITED-INPUT-
STREAM) and implements en/decoding handling we did not support before,
but would need for improved correctness.
Change-Id: Ie2d1f4e42b47512a5660a1ccc0deeec2bff9788d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8581
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This refactor is driven by the following (ultimate) aims:
- Get rid of as much of the custom stream code in mime4cl which makes
less code to maintain in the future.
- Lay the groundwork for correct handling of 8bit transfer encoding:
The mime4cl we inherited assumes that any MIME message can be decoded
completely by the CL implementation (in SBCL's case using latin1)
into CHARACTERs. This is not necessarily the case. flexi-streams
allows changing how the stream is decoded on the fly and also has
support for reading the underlying bytes which is perfect for the
requirements decoding MIME has.
- Since flexi-streams uses trivial-gray-streams, it supports
READ-SEQUENCE. Taking advantage of this may improve decoding
performance significantly in the future.
This incurs the following changes:
- Naturally we now open given files as binary files in MIME-MESSAGE.
Given strings are encoded using STRING-TO-OCTETS and then passed on
to a new octet vector method. Instead of MY-STRING-INPUT-STREAM this
now uses flexi-streams' WITH-INPUT-FROM-SEQUENCE.
- OPEN-FILE-PORTION and OPEN-DECODED-FILE-PORTION need to be merged,
since the transfer encoding not only implies an extra decoder stream
that needs to be attached after file portion stream, but also imply a
certain encoding of the stream itself (mostly binary vs. ASCII).
As flexi-streams can change their encoding on the fly this could be
untangled again, but it is not strictly necessary.
As before, we use the DATA slot of the file portion to create a fresh
stream if possible. Instead of strings we now use an vector of octets
to match MIME-MESSAGE.
The actual portioned stream relies on POSITIONED-FLEXI-INPUT-STREAM, a
subclass of the stock FLEXI-INPUT-STREAM class, described below.
- POSITIONED-FLEXI-INPUT-STREAM replaces DELIMITED-INPUT-STREAM. It is
created using MAKE-POSITIONED-FLEXI-INPUT-STREAM which accepts the
same arguments as MAKE-FLEXI-STREAMS and, additionally, :IGNORE-CLOSE.
A POSITIONED-FLEXI-INPUT-STREAM works the same as an
FLEXI-INPUT-STREAM, but upon creation, the underlying stream is
rewinded or forwarded to the argument given by :POSITION using
FILE-POSITION.
If :IGNORE-CLOSE is T, a call to CLOSE is not forwarded to the
underlying stream.
Change-Id: I2d48c769bb110ca0b7cf52441bd63c1e1c2ccd04
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8559
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Since rt.lisp seems to start tests in parallel, the informational output
about which sample file is being tested gets mangled in all sorts of
ways. The solution is to just loop over the sample files outside a test
and schedule a single test case per sample file from there.
Change-Id: I4494e4a526ce6d92a298cf7daf06c8013c7ca605
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8569
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
emacs-overlay has been held back because package(s) needed for
//users/sterni/emacs are broken in the latest version.
Change-Id: Icb8bf34b4d039f5c24ec8f30fd8f47205a343988
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8562
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
This makes sure that initializing coder-stream-mixin (for the most part)
has the same interface as initializing qbase64:decode-stream. This will
make integrating that as a faster replacement to
mime4cl:base64-decoder-stream a bit easier.
The idea is to replace the char by char base64 decoder with one that
supports read-sequence. After that deliminited-input-stream needs to
gain support for read-sequence as well, so we can actually take
advantage of this fact. Finally, we'll have to evaluate the remaining
decoders and think about switching the (base64) encoders over as well.
Change-Id: If971da02437506e00a7c9fab2b94efc42725e62d
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8555
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
For whatever reason, there were two sort of identical tests, mime.1 and
mime.2, in the mime4cl test suite: The former tested *sample1-file* and
the latter all messages *samples-directory*—in the same way, parsing the
original and a re-rendered version of the message to check if they were
equal.
We can just move sample1.msg into *samples-directory*, get rid
of *sample1-file* and thus pave the way for more test messages in the
future.
Change-Id: I843be331682b731af6ae02a4648ba1c64aaf59a5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8546
Reviewed-by: sterni <sternenseemann@systemli.org>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
The generic function itself needs to be defined using defgeneric,
defmethod is used for a defining method of a generic function, i.e. how
it should behave when confronted with a certain class.
Change-Id: Idd38afa02b56c5002e215decfff7f0c25267eab5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8532
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
This should make the canon pipeline gcroot the deps tarball, making it
less likely to be garbage-collected and rebuilt unnecessarily (which
usually incurs a hash change due to impurities).
Change-Id: I92a353d0f45056fffbc016c44a1ae05a63d76849
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8527
Tested-by: BuildkiteCI
Reviewed-by: flokli <flokli@flokli.de>
Autosubmit: sterni <sternenseemann@systemli.org>
* //3p/sources: Note that emacs-overlay is not updated for now, as
changes in emacs HEAD break //users/sterni/emacs.
* //3p/gerrit_plugins/code-owners: deps hash changed once again
or was no longer in the Nix store.
Unfortunately, building the deps derivations from scratch for gerrit
and the gerrit plugins no longer works due to a nixpkgs regression:
Due to a (operator precedence) mistake in the way the deps
derivation's installPhase is computed, it would append extra code to
the installPhase provided by us, causing a bash syntax error.
I have proposed a fix for this
upstream (<https://github.com/NixOS/nixpkgs/pull/228305>). Adding a
workaround in the repo would be possible, but a bit annoying. Since
the derivations are fixed output anyways, I've opted to build the
missing deps derivation (for code-owners) locally using the fixed
nixpkgs, updated the sha256 and copied the result into whitby's Nix
store. Hopefully by the next time we'll be rebuilding the deps
derivations again the fix will have propagated into the NixOS unstable
channel.
* //users/grfn/system/system:roswellSystem: Use mysql80 from stable.
See also https://github.com/NixOS/nixpkgs/issues/226673.
Change-Id: I9b9d57f589be4cdc3fd4f39729c170a25a655b74
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8483
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
Update all sources, hopefully we get a less cursed nixpkgs commit than
the last one.
Change-Id: I86ecd572225520e99e340373ea219c96fa2fc758
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8474
Reviewed-by: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Autosubmit: tazjin <tazjin@tvl.su>
* Satisfy new assert that the corresponding shell needs to be enabled
via programs.* if it is as the login shell of at least one user.
* //users/tazjin: “Address” removal of hardware.video.hidpi option.
* //3p/gerrit: update fetch sha256
Change-Id: Id0988a0ea7f393d6b7848a7104fc3526ee1177f4
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8407
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
decode-RFC2047 used babel's octets-to-string, but we can replace it with
the function of the same name from flexi-streams. This doesn't make a
difference for the moment, but will be useful in the future:
flexi-streams provides de- and encoding streams that we'll be able to
use to replace and augment some of the stream based MIME part handling
code in mime4cl. babel doesn't have as powerful stream functionality
although it seems to be planned.
Another big upside of flexi-streams is that we'll be able to replace
delimited-input-string using it. This should allow us to slowly work
towards correct and more efficient decoding of MIME bodies.
Change-Id: I17174f1c96c5be7d103d396564e6aa0fe24c80fc
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8371
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
Reviewed-by: sterni <sternenseemann@systemli.org>
Previously there was an issue in nmd which prevents it from working with
Nix 2.3 (it passed --store dummy://) which is why we hadn't updated
home-manager for a while. home-manager has now [included] the [fix] for
nmd I proposed, so we can finally update!
[fix]: f5a1859425
[included]: db37c53760
Change-Id: Ia1447549c0f97aa754ac1842eb453e95838c00c5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8346
Tested-by: BuildkiteCI
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: tazjin <tazjin@tvl.su>
* //users/wpcarro/avaSystem: disable hidpi
Recent changes have made nixpkgs adopt the position that hidpi
optimization can't be done generically and at the very least needs to
know a specific DPI number to optimize for. In addition to knowledge
of the display(s) in question (i.e. wpcarro needs to do this) the
issue <https://github.com/NixOS/nixpkgs/issues/222805> can give
guidance as to how to restore the desired hidpi look and feel.
Change-Id: Ia4b079a06dcb710050619f350cd0655216b4a42f
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8345
Autosubmit: sterni <sternenseemann@systemli.org>
Reviewed-by: wpcarro <wpcarro@gmail.com>
Reviewed-by: tazjin <tazjin@tvl.su>
Tested-by: BuildkiteCI
This should avoid having two builds of Nix 2.3 in the closure of whitby
and sanduny.
Change-Id: Id4b8d34da73d3f579c97adcda44df26992290764
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8192
Reviewed-by: tazjin <tazjin@tvl.su>
Autosubmit: sterni <sternenseemann@systemli.org>
Tested-by: BuildkiteCI
It's been a long time since we updated josh, almost 400 commits in
between. I read through the entire changelog, and here are relevant
josh commits from in between that might be interesting to us:
38eecee Fix optimisation bug for compose filter (#1159)
e1d10b6 Add :rev(...) filter
0f1a07b Initial implementation of refs locking (#929)
88cea2a Initial work on meta repo support
030ad93 Change magic refs to include "for"
28b1d75 Add split changes feature (#904)
1f908d7 Discover filters only on HEAD (#774)
a368d8f Make --require-auth only apply to push
8d80230 Add :linear filter (#741)
3460ec2 Implement redundant refs filtering (#700)
55b4e50 Implement stacked changes support (#699)
ea1f814 Handle @sha urls by creating magic ref (#690)
883a381 Run filter discovery only on changed refs (#685)
4bb004f Prepend refs/heads to base parameter as default (#664)
Of particular interest is a368d8f, which allows us to drop our
authentication patch and use the standard --require-auth flag again.
The default behaviour of dropping signatures on commits (which are
invalid after filtering) has also been changed in josh, now only
occuring when the `:unsign` filter is present. Since this breaks
commit hashes with our existing exported histories, we are opting to
set a `:unsign` filter prefix on all proxy requests to ensure that the
hashes stay consistent.
During this update we found a bug (josh#1155) which was fixed in the
commit that this CL moves josh to.
Change-Id: I3afac1619f3aa90313a0441da91f0e4a96fe0a3b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/8186
Autosubmit: tazjin <tazjin@tvl.su>
Reviewed-by: flokli <flokli@flokli.de>
Tested-by: BuildkiteCI
