For some reason the driver does not mount the bus sometimes, in that
case just call the tool directly without a specific bus, so we get at
least some sort of brightness adjustment (lol).
Change-Id: Ie8fe8c500fb1025609b569715e681e053e6e06ed
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12909
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
For trying out a bunch of themes in quick succession.
Also note down a few of the cooler themes.
Change-Id: I0da80cc0945dba03d3592f28f4c34df4b5969e82
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12893
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
This simple dbus service will use the ddcci interfaces to change
brightness for both the internal and external monitor (roughly in
sync).
Currently in the alacritty-change-color-scheme script because I’m lazy
and still experimenting.
Change-Id: Ib2c4323699ed9d19ee398f84680b755df4b25798
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12891
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
These `tsconfig` will apply to JS files with jsdoc comments. Sweet!
Change-Id: I1a623d0ec7e2d73e99d7c6aaf8162d96f4ff2b29
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12889
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
We want to use the tracers quite similar to how we’d use OTEL for
tracing, meaning you should be able to start a span and use it within
another span to register it as a parent span.
They are also batched up and sent asynchrously, so the won’t incur a
lot of overhead on dbus nor block the main execution flow (done via
sending a nodejs event and a dedicated batch sending process).
Change-Id: If61b85305807e661ffee386f793c11c4b7a858a9
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12888
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
This makes defining the interface a little less verbose & more
typesafe (checks are done by the dbus library).
Change-Id: I16df987fd152cabf76ed9878ed1a372a0f7003fb
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12886
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
For simplicity’s sake this puts everything into the
alacritty-change-color-scheme script for now.
This implements a simple dbus-opentelemetry proxy adapter, which
allows services to record otel traces without having to depend on the
quite complex otel libraries. Instead, they just send their traces to
the dbus tracing interface, and the service that binds against that
interface forwards the spans to the OTLP collector.
First you create a new Tracer for your service via the `TracerFactory`
interface:
```
> busctl --user call \
de.profpatsch.otel.Tracer \
/de/profpatsch/otel/TracerFactory \
de.profpatsch.otel.TracerFactory CreateTracer \
s hello
s "/de/profpatsch/otel/tracers/hello"
```
(this corresponds to setting up a tracer with properties in OTEL)
Then, you can use the returned object path to call the `Tracer`
interface proper:
```
< busctl --user call \
de.profpatsch.otel.Tracer \
/de/profpatsch/otel/tracers/hello \
de.profpatsch.otel.Tracer \
StartSpan \
s '{"spanId": "111", "name": "111"}'
```
This will create the spans. You can also set their timestamps on the
sending side via `startTime`/`endTime`, but make sure it’s a hrtime
tuple.
Prefer batching multiple spans vie the `BatchSpans` call.
Change-Id: Ie6cfdcb0dc3e2398316a2c1763bc72c1118168b0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12885
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Reviewed-by: benjaminedwardwebb <benjaminedwardwebb@gmail.com>
Adds a simple-stupid dbus interface for this daemon which allows
on-the-fly changing of the alacritty color scheme.
Example call:
```
busctl --user call de.profpatsch.alacritty.ColorScheme \
/de/profpatsch/alacritty/ColorScheme \
de.profpatsch.alacritty.ColorScheme \
SetColorScheme s 'prefer-dark'
```
Change-Id: Ic895fedefb3f5bd95f2279edf53fe179e8f24f89
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12875
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
they switched from .ch to .sh
Change-Id: I889634ec257b7956b9d2b22a9ad6fc0c889f43c2
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12853
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
Uses xapian under the hood to index the contents, then makes it
searchable with a CGI binary on http://localhost:8080
We could in theory index every -doc output this way to get local
documentation search for the current system (similar to `man-db`).
Change-Id: I2588c8f100841cfbed570bb65d376b79747c06ee
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12710
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
I should probably remove the default.nix files in these as well so
they don’t get built on CI.
Change-Id: I09764f2ee198ab4016a1649f1675f7c45d207b09
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12580
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Want to be able to make changes with low overhead, and having it in a
separate library is just annoying.
Change-Id: I30b76885d8e0e6ebaefe9506cf36672783ed4988
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12577
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
the linters & prettier config should apply to my whole subdir.
This is somewhat nasty, you have to `npm` in the toplevel dir before
it starts working, otoh dev tooling is dev time and I’m working on
these alone.
Change-Id: I96721f549b24a40b7ffbb2d310f37a40d2590b2b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12573
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Add a tapping command that does not quantize the timestamps.
For the silence warning, we make it BPM-dependent (defaulting to
120BPM as everywhere else), meaning for slower songs we give a higher
possible time difference before we display a warning.
Change-Id: Idefc44166639b23c2105a1a810ac22ed84457225
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12563
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
That was the original intention, but I didn’t understand that lua
would fail with "r+" if the file does not exist (and "w+" truncates
the file, so you have to try "r+" and then fall back to "w+" which
will create the file as well.)
Change-Id: Ib238f0b73ab403ceeaf035d053a14eba718d1b48
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12562
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
This adds support for uploading the lyrics part of an .lrc file to
lrclib, see https://lrclib.net/docs
I pretty much only used ChatGPT to translate the rust “proof of work”
challenge to nodejs and it worked first try lol.
Before uploading the lyrics, I construct a webview with a preview of
what is going to be uploaded, and then only upload when that is
accepted. Pretty sweet.
Also adds two commands for increasing/decreasing the current timestamp
by 100ms and starting playback from 2 seconds before that, very handy
for fine-tuning lines.
Change-Id: Ia6adfe26d0c21c62554c8f8c55e97e2caec95d1e
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12561
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
If the bpm header already exists, overwrite it with the new value.
Also use an existing header as suggestion.
Change-Id: If6431e8056504db437c31313d885b5ba0d0e55d5
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12553
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Insert the length and stuff into the .lrc file headers.
Change-Id: Id2565c95c516208f1e46b79d5b8da50f3d6bee62
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12552
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
It’s a bit crappy and really depends on the input field opening
quickly again (which it often doesn’t really do…), but it was the
easiest way I figured how to do it haha.
Aligning to eigth notes is pretty much the easiest way to sync
everything up after tapping in the timestamps (for most songs).
Change-Id: Ibbb072f62b6ee17d983e81b6c1554bc3516fa636
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12551
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
* tap-bpm: simple CLI program that accepts key inputs and averages a
BPM value
* lyric-timing-mpv-script: If you press Ctrl+l, mpv attaches the
current timestamp to a .lrc file named after the song.
This is for manually timing missing songs for uploading them to
https://lrclib.net/
* extension: vscode extension for `.lrc` files, currently with the
following features:
1. A “jump to LRC position” command which reads an .lrc timestamp
from the current line and expects mpv to listen on
`~/tmp/mpv-socket` (via `--input-ipc-server`), and will seek to
the exact timestamp (down to the ms) in the currently playing
song.
2. Some initial linting warnings
- A lint that warns if the difference to the next timestamp is
more than 10s (which usually means there’s an instrumental and
the previous line is stuck)
- A lint that checks that timestamps are monotonically
increasing
Change-Id: I32a4ac0e2c5bbe3d94e45ffcf647f81bc7c08aa0
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12537
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Leaving out any symbol characters improves the search accuracy.
Change-Id: I00c993d4099bb8e9701783b53afc9423f1b2f674
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12480
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
if there are not synced lyrics.
Change-Id: I3e8d452fc63847505886ea0bb01d29dd5dcb56d1
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12477
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
This never went anywhere.
We had problems with `git2` breaking, so let’s remove everything that
this pulled in.
Change-Id: Ia29d827cd6fc7b97aedca36a37f8418384579c38
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12474
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
Instead of serving a stale table when a torrent gets deleted, fetch
the whole view again. This is a little wasteful, but torrents
shouldn’t get deleted very often, so it’s fine.
Change-Id: If33d517270421881852158f27dbc3e7d24880d3b
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12333
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
If transmission does not know about a torrent file anymore, we should
not only delete our local transmission torrent hash, but also the
torrent file.
Before, it would always display the old weighted torrent, even after
removing it from transmission. Now, it will automatically clear and
switch to the new top-weighted mp3 version.
Small bug: since we only clean the torrents after already fetching the
table data, we get a stale result right after clean-up. Maybe we
should re-do the fetch instead.
Also logs what gets deleted and only ever deletes if there is
something to delete, leading to more obvious traces.
Change-Id: I0f6c1dc3669d0f549efaba2c46c34b77c1eb7e33
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12332
Reviewed-by: Profpatsch <mail@profpatsch.de>
Tested-by: BuildkiteCI
I changed the seeding weight, so now it would not show already
downloaded torrents, prompting me to fetch stuff that I already have
in new qualities. Obviously, that’s not the best idea.
Kinda surprised it’s this easy to fix heh.
Change-Id: I6bbf325672a91d794d144c006ccf3d702a581bce
Reviewed-on: https://cl.tvl.fyi/c/depot/+/12330
Tested-by: BuildkiteCI
Reviewed-by: Profpatsch <mail@profpatsch.de>
