lbailly/liminix
1
0
Fork 0
forked from DGNum/liminix
Code Pull requests 2 Activity Actions
278 commits 8 branches 0 tags 1.5 MiB
Commit graph

58 commits

Author SHA1 Message Date
Daniel Barlow
3f11a3c708 gl-ar750 gpio support is required for USB to work 
_legacy_ gpio sysfs interface is required  by the openwrt
ath79 phy usb driver
 2023-03-18 14:30:10 +00:00
Daniel Barlow
ad3f241af9 support mt300n-v2 flash 2023-03-10 23:24:05 +00:00
Daniel Barlow
2594239bbc can't use builtins.fetchurl on hydra? 2023-03-10 18:51:07 +00:00
Daniel Barlow
be06363e4f new example for rsync/usb backup server 2023-03-10 18:42:32 +00:00
Daniel Barlow
d83bcc643e add wifi firmware, move things around in ram 
* at the base address we were using, the filesystem was getting
corrupted presumably because the kernel unpacked into it

* leave a little more space between compressed kernel and
squashfs. this is probably ineffective but also harmless
 2023-03-10 00:48:47 +00:00
Daniel Barlow
f50b0627a2 gl-mt300n-v2: initialize switch & define networkInterfaces 
It booted and mounted rootfs the first time I tried, which
was nice. Wireless doesn't work yet, it needs firmware
 2023-03-09 19:30:57 +00:00
Daniel Barlow
f36d8ef1d0 make mt300a flash-ready 2023-03-08 20:35:41 +00:00
Daniel Barlow
85b5edc39d vlan interfaces depend on parent 2023-03-08 20:34:39 +00:00
Daniel Barlow
d290965711 shuffle kernel config for gl-mt300a 2023-03-07 22:49:33 +00:00
Daniel Barlow
e8d5e4c788 move regulatory.db to wlan module 2023-03-07 21:32:21 +00:00
Daniel Barlow
c046c39613 wlan support for mt300a 2023-03-07 19:11:12 +00:00
Daniel Barlow
e86e9430fc vlans and mt300a wired network interfaces 2023-03-07 19:10:12 +00:00
Daniel Barlow
38756af1c1 add in_outputs shell function which ensures umask is set 2023-03-03 23:07:03 +00:00
Daniel Barlow
e0ea576674 rename "device" config tree as "hardware" 
we are also using "device" for "network device" (as in eth0,
wlan0 etc) so this makes it a bit less confusing perhaps
 2023-03-03 22:52:33 +00:00
Daniel Barlow
263882cbe4 move dts config option from boot to device 2023-03-03 22:43:44 +00:00
Daniel Barlow
6d191b73ae add outputs.flashable - flashable firmware.bin 2023-03-02 23:01:26 +00:00
Daniel Barlow
adc198b3af WIP push to see what passes 2023-03-01 22:24:58 +00:00
Daniel Barlow
259f5c767b ath10k kernel support and and firmware 
- some firmware from kvalo repository
- a service to extract calibration data ART partition
- missing kernel symbol to enable PCI support
 2023-03-01 21:08:47 +00:00
Daniel Barlow
41ff5a1fe6 move FW_LOADER* config to modules/base 2023-03-01 18:16:01 +00:00
Daniel Barlow
f2e5f65149 add wireless support for hardware devices 
* gl-ar750 the ath9k works, ath10k is untested
* gl-mt300[an] build but may not boot
 2023-02-22 19:17:47 +00:00
Daniel Barlow
751920c8fc qemu: switch to building wireless as kernel modules 
This is a hefty change

* add support for kernel backports project
* build wireless stack/drivers as modules from a backported kernel
* create a service to load/unload the modules
 2023-02-22 18:41:41 +00:00
Daniel Barlow
a2d8eaf95d make kernel config visually consistent: symbols are unquoted 2023-02-22 18:28:48 +00:00
Daniel Barlow
4faf529dc3 define kernel MODULE_SIG everywhere 2023-02-22 18:20:56 +00:00
Daniel Barlow
10aeb5e464 add notes about dual-band hardware 2023-02-19 18:14:27 +00:00
Daniel Barlow
81ccd11347 gl-ar750: support _actual_ mtd/spi not just fake one 
the ath9k driver needs MTD because that's where it looks for
firmware/calibration data (ART partition)
 2023-02-19 18:13:38 +00:00
Daniel Barlow
817c3793d4 move dts config from kernel to boot 
The kernel does not need to know about the DTS. I am prepared
to be very slightly injured on this hill.
 2023-02-18 15:13:19 +00:00
Daniel Barlow
5b51aa0826 tftp load address is per-device, IP addresses are local config 2023-02-15 22:06:28 +00:00
Daniel Barlow
dd8c8edd9c rewrite phram boot to use correct sizes and offsets 2023-02-15 22:06:28 +00:00
Daniel Barlow
1a08aaad01 move outputs into a module 2023-02-10 23:10:44 +00:00
Daniel Barlow
0a06319d0c make loadAddress and entryPoint device configuration 
... already having second thoughts about loadAddress
 2023-02-10 18:20:01 +00:00
Daniel Barlow
8cead61740 convert devices from overlay to module 
this makes it possible for devices to stash things in
`config` (e.g. pathname to DTS) that can later be overwritten
(even by the end user)
 2023-02-10 17:54:33 +00:00
Daniel Barlow
afd9bbbc80 building but untested kernels for gl-mt300a, gl-mt300n-v2 2023-02-06 23:19:53 +00:00
Daniel Barlow
eaf90df56c per-device dts 2023-02-06 23:19:35 +00:00
Daniel Barlow
76243d306c remove checkedConfig, check all the config 2022-10-19 22:09:38 +01:00
Daniel Barlow
0a46ba7fc3 move some wifi-related comments into wlan module 2022-10-19 17:36:31 +01:00
Daniel Barlow
f1b7780537 speed up kernel build 
by having two separate derivations for patching the kernel source tree
and building it, we have to copy said source trees from one store
location to another which takes non-neglible time on spinning rust
(literally minutes on my machine). Replace with a single derivation
that can do more things on one tree in-place
 2022-10-19 17:34:22 +01:00
Daniel Barlow
3ef30056c4 trim down the qemu kernel config 
just retain the options we need to pass the tests
 2022-10-18 22:28:07 +01:00
Daniel Barlow
3ff9e49085 enable eth1 2022-10-18 15:48:29 +01:00
Daniel Barlow
c2bcf2dd3e fixup 4b513cd 2022-10-18 15:47:27 +01:00
Daniel Barlow
45d52a6c99 tidy kconfig a bit 2022-10-16 15:31:10 +01:00
Daniel Barlow
4b513cdb98 use openwrt kernel for gl-ar750 2022-10-16 15:15:18 +01:00
Daniel Barlow
77922c875b add per-device overlay 
presently this is used to reference the appropriate kernel and (if
needed) openwrt source trees, but I would not be surprised if we find
other uses
 2022-10-15 18:55:33 +01:00
Daniel Barlow
e823e7a29c HALFARSED enable toggling promptless kconfig symbols 
Some kernel config symbols we need to enable in some configurations
don't have a "prompt" entry in the Kconfig files, meaning that
make oldconfig (or any other make fooconfig) won't change them.
So we add a Kconfig.local where they can be selected

In this patch we hardcode the required symbol. Next step would be
to generalise so that they could be specified in something like a
config.kernel.hiddenConfig attrset
 2022-10-09 09:50:17 +01:00
Daniel Barlow
1c39da8544 tidy kconfig 2022-10-07 23:26:00 +01:00
Daniel Barlow
8e8c34b3fa gl-ar750: frob kernel config for ttyS0 (SERIAL_OF_PLATFORM) 2022-10-07 23:24:36 +01:00
Daniel Barlow
423cf4cbee WIP gl-ar750 mounts root fs and starts pid 1 
but still can't open /dev/console so it panics quite quickly
 2022-10-07 00:26:32 +01:00
Daniel Barlow
e78028e58f make outputs.directory useful for tftp-booting devices 
basically, add some more symlinks to it
 2022-10-07 00:23:04 +01:00
Daniel Barlow
67c21e51d7 gl-ar750: boots 2022-10-05 21:58:39 +01:00
Daniel Barlow
309bb0db2d qemu kernel: choose an endianness 
more than mildly surprised this wasn't causing it to
report some kind of error, tbh
 2022-10-05 21:57:38 +01:00
Daniel Barlow
4c2e460042 qemu: remove =m kconfig to shorten build times 
it's not as though we're using any of the modules anyway
 2022-10-05 21:55:31 +01:00