forked from DGNum/liminix
Document jffs2, min-copy-closure, liminix-rebuild
Some of the code is now out of date w.r.t. some of the text
This commit is contained in:
Daniel Barlow
parent
b1f4db00a0
commit
648ac2eb7f
2 changed files with 200 additions and 86 deletions
|
|
@ -149,6 +149,7 @@ module(s) it uses. I have this segment in configuration.nix which you
|
|||
may be able to adapt:
|
||||
|
||||
.. code-block:: nix
|
||||
|
||||
boot = {
|
||||
kernelParams = [ "intel_iommu=on" ];
|
||||
kernelModules = [
|
||||
|
|
|
|||
279
doc/user.rst
279
doc/user.rst
|
|
@ -2,32 +2,101 @@ User Manual
|
|||
###########
|
||||
|
||||
This manual is an early work in progress, not least because Liminix is
|
||||
not yet ready for users who are not also developers.
|
||||
not yet really ready for users who are not also developers. Your
|
||||
feedback to improve it is very welcome.
|
||||
|
||||
Configuring for your use case
|
||||
*****************************
|
||||
Installation
|
||||
************
|
||||
|
||||
You need to create a ``configuration.nix`` that describes your router
|
||||
The Liminix installation process is not quite like installing NixOS on
|
||||
a real computer, but some NixOS experience will nevertheless be
|
||||
helpful in understanding it. The steps are as follows:
|
||||
|
||||
* Decide whether you want the device to be updatable in-place (there
|
||||
are advantages and disadvantages), or if you are happy to generate
|
||||
and flash a new image whenever changes are required.
|
||||
|
||||
* Create a :file:`configuration.nix` describing the system you want
|
||||
|
||||
* Build an image
|
||||
|
||||
* Flash it to the device
|
||||
|
||||
|
||||
Choosing a flavour (read-only or updatable)
|
||||
===========================================
|
||||
|
||||
Liminix installations come in two "flavours"- read-only or in-place
|
||||
updatable:
|
||||
|
||||
* a read-only installation can't be updated once it is flashed to your
|
||||
device, and so must be reinstalled in its entirety every time you
|
||||
want to change it. It uses the ``squashfs`` filesystem which has
|
||||
very good compression ratios and so you can pack quite a lot of
|
||||
useful stuff onto your device. This is good if you don't expect
|
||||
to change it often.
|
||||
|
||||
* an updatable installation has a writable filesystem so that you can
|
||||
update configuration, upgrade packages and install new packages over
|
||||
the network after installation. This uses the `jffs2
|
||||
<http://www.linux-mtd.infradead.org/doc/jffs2.html>`_ filesystem:
|
||||
although it does compress the data, the need to support writes means
|
||||
that it can't pack quite as small as squashfs, so you will not have
|
||||
as much space to play with.
|
||||
|
||||
Updatability caveats
|
||||
~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
At the time of writing this manual the read-only squashfs support is
|
||||
much more mature. Consider also that it may not be possible to perform
|
||||
"larger" updates in-place even if you do opt for updatability. If you
|
||||
have (for example) an 11MB system on a 16MB device, you won't be able
|
||||
to do an in-place update of something fundamental like the C library
|
||||
(libc), as this will temporarily require 22MB to install all the
|
||||
packages needing the new library before the packages using the old
|
||||
library can be removed. A writable system will be more useful for
|
||||
smaller updates such as installing a new package (perhaps you
|
||||
temporarily need tcpdump to diagnose a network problem) or for
|
||||
changing configuration files.
|
||||
|
||||
Note also that the kernel is not part of the filesystem so cannot be
|
||||
updated this way. Kernel changes require a full reflash.
|
||||
|
||||
|
||||
|
||||
Creating configuration.nix
|
||||
==========================
|
||||
|
||||
|
||||
You need to create a ``configuration.nix`` that describes your device
|
||||
and the services that you want to run on it. Start by copying
|
||||
``vanilla-configuration.nix`` and adjusting it, or look in the `examples`
|
||||
directory for some pre-written configurations.
|
||||
|
||||
Your configuration may include modules and probably _should_
|
||||
``configuration.nix`` conventionally describes the packages, services,
|
||||
user accounts etc of the device. It does not describe the hardware
|
||||
itself, which is specified separately in the build command (as you
|
||||
will see below).
|
||||
|
||||
Your configuration may include modules: it probably *should*
|
||||
include the ``standard`` module unless you understand what it
|
||||
does and what happens if you leave it out.
|
||||
|
||||
.. code-block: nix
|
||||
.. code-block:: nix
|
||||
|
||||
imports = [
|
||||
./modules/standard.nix
|
||||
]
|
||||
configuration.rootfsType = "jffs2"; # or "squashfs"
|
||||
|
||||
|
||||
|
||||
Building and flashing
|
||||
*********************
|
||||
Building
|
||||
========
|
||||
|
||||
An example command to build Liminix might look like this:
|
||||
Build Liminix using the :file:`default.nix` in the project toplevel
|
||||
directory, passing it arguments for configuration and hardware. For
|
||||
example:
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
|
|
@ -50,52 +119,8 @@ is a raw image file that can be written directly to the firmware flash
|
|||
partition.
|
||||
|
||||
|
||||
Flashing with :command:`flashcp`
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
This requires an existing Liminix system, or perhaps some other
|
||||
operating system on the device which provides the :command:`flashcp`
|
||||
command. You need to locate the "firmware" partition, which you can do
|
||||
with a combination of :command:`dmesg` output and the contents of
|
||||
:file:`/proc/mtd`
|
||||
|
||||
**Don't do this on a device that's running on the same flash partition
|
||||
as you're about to overwrite, otherwise you're likely to crash it. Use
|
||||
kexecboot (see "Updates to running devices" below) first to reboot
|
||||
into a RAM-based system.**
|
||||
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
<5>[ 0.469841] Creating 4 MTD partitions on "spi0.0":
|
||||
<5>[ 0.474837] 0x000000000000-0x000000040000 : "u-boot"
|
||||
<5>[ 0.480796] 0x000000040000-0x000000050000 : "u-boot-env"
|
||||
<5>[ 0.487056] 0x000000050000-0x000000060000 : "art"
|
||||
<5>[ 0.492753] 0x000000060000-0x000001000000 : "firmware"
|
||||
|
||||
# cat /proc/mtd
|
||||
dev: size erasesize name
|
||||
mtd0: 00040000 00001000 "u-boot"
|
||||
mtd1: 00010000 00001000 "u-boot-env"
|
||||
mtd2: 00010000 00001000 "art"
|
||||
mtd3: 00fa0000 00001000 "firmware"
|
||||
mtd4: 002a0000 00001000 "kernel"
|
||||
mtd5: 00d00000 00001000 "rootfs"
|
||||
|
||||
Then you can copy the image to the device with :command:`ssh`
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
build-machine$ tar chf - result/firmware.bin | \
|
||||
ssh root@the-device tar -C /run -xvf -
|
||||
|
||||
and then connect to the device and run
|
||||
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
flashcp -v firmware.bin /dev/mtd3
|
||||
|
||||
Flashing
|
||||
========
|
||||
|
||||
|
||||
Flashing from OpenWrt (untested)
|
||||
|
|
@ -108,7 +133,7 @@ If your device is running OpenWrt then it probably has the
|
|||
|
||||
mtd -r write /tmp/firmware_image.bin firmware
|
||||
|
||||
For more information, please see the `OpenWrt manual <https://openwrt.org/docs/guide-user/installation/sysupgrade.cli>`_
|
||||
For more information, please see the `OpenWrt manual <https://openwrt.org/docs/guide-user/installation/sysupgrade.cli>`_ which may also contain (hardware-dependent) instructions on how to flash an image using the vendor firmware - perhaps even from a web interface.
|
||||
|
||||
|
||||
Flashing from the boot monitor
|
||||
|
|
@ -116,20 +141,26 @@ Flashing from the boot monitor
|
|||
|
||||
If you are prepared to open the device and have a TTL serial adaptor
|
||||
of some kind to connect it to, you can probably flash it using U-Boot.
|
||||
This is quite hardware-specific: please refer to the Developer Manual.
|
||||
This is quite hardware-specific, and sometimes involves soldering:
|
||||
please refer to the Developer Manual.
|
||||
|
||||
|
||||
|
||||
Updates to running devices
|
||||
**************************
|
||||
Flashing from an existing Liminix system with :command:`flashcp`
|
||||
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
||||
|
||||
To mitigate the risk of flashing a new configuration and potentially
|
||||
render the device unresponsive if the configuration is unbootable or
|
||||
doesn't bring up a network device, Liminix has a
|
||||
"try before write" mode.
|
||||
The flash procedure from an existing Liminix-system is two-step.
|
||||
First we reboot the device (using "kexec") into an "ephemeral"
|
||||
RAM-based version of the new configuration, then when we're happy it
|
||||
works we can flash the image - and if it doesn't work we can reboot
|
||||
the device again and it will boot from the old image.
|
||||
|
||||
To test a configuration without writing it to flash, import the
|
||||
``kexecboot`` module and build ``outputs.kexecboot`` instead of
|
||||
|
||||
Building the RAM-based image
|
||||
............................
|
||||
|
||||
|
||||
To creatr the ephemeral image, build ``outputs.kexecboot`` instead of
|
||||
``outputs.default``. This generates a directory containing the root
|
||||
filesystem image and kernel, along with an executable called `kexec`
|
||||
and a `boot.sh` script that runs it with appropriate arguments.
|
||||
|
|
@ -157,29 +188,111 @@ reboot - be sure to close all open files and finish anything else
|
|||
you were doing first.*
|
||||
|
||||
If the new system crashes or is rebooted, then the device will revert
|
||||
to the old configuration it finds in flash. Thus, by combining kexec
|
||||
boot with a hardware watchdog you can try new images with very little
|
||||
chance of bricking anything. When you are happy that the new
|
||||
configuration is correct, build and flash a flashable image of it.
|
||||
to the old configuration it finds in flash.
|
||||
|
||||
|
||||
Building the second (permanent) image
|
||||
.....................................
|
||||
|
||||
|
||||
While running in the kexecboot system, you can copy the permanent
|
||||
image to the device with :command:`ssh`
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
build-machine$ tar chf - result/firmware.bin | \
|
||||
ssh root@the-device tar -C /run -xvf -
|
||||
|
||||
Next you need to connect to the device and locate the "firmware"
|
||||
partition, which you can do with a combination of :command:`dmesg`
|
||||
output and the contents of :file:`/proc/mtd`
|
||||
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
<5>[ 0.469841] Creating 4 MTD partitions on "spi0.0":
|
||||
<5>[ 0.474837] 0x000000000000-0x000000040000 : "u-boot"
|
||||
<5>[ 0.480796] 0x000000040000-0x000000050000 : "u-boot-env"
|
||||
<5>[ 0.487056] 0x000000050000-0x000000060000 : "art"
|
||||
<5>[ 0.492753] 0x000000060000-0x000001000000 : "firmware"
|
||||
|
||||
# cat /proc/mtd
|
||||
dev: size erasesize name
|
||||
mtd0: 00040000 00001000 "u-boot"
|
||||
mtd1: 00010000 00001000 "u-boot-env"
|
||||
mtd2: 00010000 00001000 "art"
|
||||
mtd3: 00fa0000 00001000 "firmware"
|
||||
mtd4: 002a0000 00001000 "kernel"
|
||||
mtd5: 00d00000 00001000 "rootfs"
|
||||
|
||||
Now run (in this example)
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
flashcp -v firmware.bin /dev/mtd3
|
||||
|
||||
|
||||
"I know my new image is good, can I skip the intemediate step?"
|
||||
```````````````````````````````````````````````````````````````
|
||||
|
||||
In addition to giving you a chance to see if the new image works, this
|
||||
two-step process ensures that you're not copying the new image over
|
||||
the top of the active root filesystem. It might work, or it might
|
||||
crash in surprising ways.
|
||||
|
||||
|
||||
|
||||
Module options (tbd)
|
||||
**************
|
||||
Updating an installed system (JFFS2)
|
||||
************************************
|
||||
|
||||
|
||||
Adding packages
|
||||
===============
|
||||
|
||||
|
||||
If your device is running a JFFS2 root filesystem, you can build
|
||||
extra packages for it on your build system and copy them to the
|
||||
device: any package in Nixpkgs or in the Liminix overlay is available
|
||||
with the ``pkgs`` prefix:
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
nix-build -I liminix-config=./my-configuration.nix \
|
||||
--arg device "import ./devices/mydevice" -A pkgs.tcpdump
|
||||
|
||||
nix-shell -p min-copy-closure root@the-device result/
|
||||
|
||||
Note that this only copies the package to the device: it doesn't update
|
||||
any profile to add it to ``$PATH``
|
||||
|
||||
|
||||
Rebuilding the system
|
||||
=====================
|
||||
|
||||
:command:`liminix-rebuild` is the Liminix analogue of :command:`nixos-rebuild`, although its operation is a bit different because it expects to run on a build machine and then copy to the host device. Run it with the same ``liminix-config`` and ``device`` parameters as you would run :command:`nix-build`, and it will build any new/changed packages and then copy them to the device using SSH. For example:
|
||||
|
||||
.. code-block:: console
|
||||
|
||||
liminix-rebuild root@the-device -I liminix-config=./examples/rotuer.nix --arg device "import ./devices/gl-ar750"
|
||||
|
||||
|
||||
Caveats
|
||||
~~~~~~~
|
||||
|
||||
* it needs there to be enough free space on the device for all the new
|
||||
packages in addition to all the packages already on it - which may be
|
||||
a problem if a lot of things have changed (e.g. a new version of
|
||||
nixpkgs).
|
||||
|
||||
* it cannot upgrade the kernel, only userland
|
||||
|
||||
* it reboots the device!
|
||||
|
||||
|
||||
|
||||
Foo module
|
||||
==========
|
||||
Configuration Options
|
||||
*********************
|
||||
|
||||
|
||||
|
||||
Module docs will go here. This part of the doc should be autogenerated.
|
||||
|
||||
|
||||
Bar module
|
||||
==========
|
||||
|
||||
Baz module
|
||||
==========
|
||||
|
||||
Quuz net device
|
||||
===============
|
||||
|
|
|
|||
Loading…
Reference in a new issue