lbailly/liminix
1
0
Fork 0
forked from DGNum/liminix
Code Pull requests 2 Activity Actions

fix section order

Browse source
This commit is contained in:
Daniel Barlow 2023-07-09 15:18:19 +01:00
parent 2d05695d99
commit 0f57ae2a32
1 changed files with 19 additions and 18 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

37
doc/user.rst
View file

@ -157,23 +157,6 @@ works we can flash the image - and if it doesn't work we can reboot
the device again and it will boot from the old image.
Flashing from OpenWrt (not currently advised!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. CAUTION:: At your own risk! This may in some circumstances lead to
bricking the device: we think this flash method is currently
incompatible with use of a writeable (jffs2) filesystem.
If your device is running OpenWrt then it probably has the
:command:`mtd` command installed. After transferring the image onto the
device using e.g. :command:`ssh`, you can run it as follows:
.. code-block:: console
mtd -r write /tmp/firmware.bin firmware
For more information, please see the `OpenWrt manual <https://openwrt.org/docs/guide-user/installation/sysupgrade.cli>`_ which may also contain (hardware-dependent) instructions on how to flash an image using the vendor firmware - perhaps even from a web interface.
Building the RAM-based image
............................
@ -258,10 +241,28 @@ crash in surprising ways.
Flashing from OpenWrt (not currently advised!)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
.. CAUTION:: At your own risk! This will (at least in some
circumstances) lead to bricking the device: we think this
flash method is currently incompatible with use of a
writeable (jffs2) filesystem.
If your device is running OpenWrt then it probably has the
:command:`mtd` command installed. After transferring the image onto the
device using e.g. :command:`ssh`, you can run it as follows:
.. code-block:: console
mtd -r write /tmp/firmware.bin firmware
For more information, please see the `OpenWrt manual <https://openwrt.org/docs/guide-user/installation/sysupgrade.cli>`_ which may also contain (hardware-dependent) instructions on how to flash an image using the vendor firmware - perhaps even from a web interface.
Updating an installed system (JFFS2)
************************************
Adding packages
===============