liminix/devices/turris-omnia/default.nix

{
  description = ''
    Turris Omnia
    ************
  '';

  system = {
    crossSystem = {
      config = "armv7l-unknown-linux-musleabihf";
    };
  };

  module = {pkgs, config, lib, lim, ... }:
    let openwrt = pkgs.openwrt; in {
          imports = [
            ../../modules/arch/arm.nix
            ../../modules/outputs/tftpboot.nix
            ../../modules/outputs/ext4fs.nix
            ../../modules/outputs/mbrimage.nix
            ../../modules/outputs/extlinux.nix
          ];
    kernel = {
      src = pkgs.pkgsBuildBuild.fetchurl {
        name = "linux.tar.gz";
        url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.71.tar.gz";
        hash = "sha256-yhO2cXIeIgUxkSZf/4aAsF11uxyh+UUZu6D1h92vCD8=";
      };
      extraPatchPhase = ''
          ${pkgs.openwrt.applyPatches.mvebu}
      '';
      config = {
        PCI = "y";
        OF = "y";
        MEMORY = "y"; # for MVEBU_DEVBUS
        DMADEVICES = "y"; # for MV_XOR
        CPU_V7 = "y";
        ARCH_MULTIPLATFORM = "y";
        ARCH_MVEBU = "y";
        ARCH_MULTI_V7= "y";
        PCI_MVEBU = "y";
        AHCI_MVEBU = "y";
        MACH_ARMADA_38X = "y";
        SMP = "y";
	      # this is disabled for the moment because it relies on a GCC
        # plugin that requires gmp.h to build, and I can't see right now
        # how to confgure it to find gmp
        STACKPROTECTOR_PER_TASK = "n";
        NR_CPUS = "4";
        VFP = "y";
        NEON= "y";

        # WARNING: unmet direct dependencies detected for ARCH_WANT_LIBATA_LEDS
        ATA = "y";

        PSTORE = "y";
        PSTORE_RAM = "y";
        PSTORE_CONSOLE = "y";
        PSTORE_DEFLATE_COMPRESS = "n";

        SERIAL_8250 = "y";
        SERIAL_8250_CONSOLE = "y";
        SERIAL_OF_PLATFORM="y";
        SERIAL_MVEBU_UART = "y";
        SERIAL_MVEBU_CONSOLE = "y";

        SERIAL_8250_DMA= "y";
        SERIAL_8250_DW= "y";
        SERIAL_8250_EXTENDED= "y";
        SERIAL_8250_MANY_PORTS= "y";
        SERIAL_8250_SHARE_IRQ= "y";
        OF_ADDRESS= "y";
        OF_MDIO= "y";

        WATCHDOG = "y";        # watchdog is enabled by u-boot
        ORION_WATCHDOG = "y";  # so is non-optional to keep feeding

        MVEBU_DEVBUS = "y"; # "Device Bus controller ...  flash devices such as NOR, NAND, SRAM, and FPGA"
        MVMDIO = "y";
        MVNETA = "y";
        MVNETA_BM = "y";
        MVNETA_BM_ENABLE = "y";
        SRAM = "y"; # mmio-sram is "compatible" for bm_bppi reqd by BM
        PHY_MVEBU_A38X_COMPHY = "y"; # for eth2

        MVPP2 = "y";
        MV_XOR = "y";

        NET_DSA = "y";
        NET_DSA_MV88E6XXX = "y"; # depends on PTP_1588_CLOCK_OPTIONAL
      };
    };

    boot = {
      commandLine = [
        "console=ttyS0,115200"
        "pcie_aspm=off" # ath9k pci incompatible with PCIe ASPM
      ];
      imageFormat = "fit";
    };
    filesystem =
      let
        inherit (pkgs.pseudofile) dir symlink;
        firmware = pkgs.stdenv.mkDerivation {
          name = "wlan-firmware";
          phases = ["installPhase"];
          installPhase = ''
            mkdir $out
            cp -r ${pkgs.linux-firmware}/lib/firmware/ath10k/QCA988X $out
          '';
        };
        in dir {
          lib = dir {
            firmware = dir {
              ath10k = symlink firmware;
            };
          };
        };

    hardware = let
      mac80211 = pkgs.mac80211.override {
        drivers = ["ath9k_pci" "ath10k_pci"];
        klibBuild = config.system.outputs.kernel.modulesupport;
      };
      in {
        defaultOutput = "mtdimage";
        loadAddress = lim.parseInt "0x00008000";
        entryPoint = lim.parseInt "0x00008000";
        rootDevice = "/dev/mtdblock0";
        dts = {
          src = "${config.system.outputs.kernel.modulesupport}/arch/arm/boot/dts/armada-385-turris-omnia.dts";
          includes =  [
            "${config.system.outputs.kernel.modulesupport}/arch/arm/boot/dts/"
          ];
        };
        flash.eraseBlockSize = 65536; # only used for tftpboot
        networkInterfaces =
          let
            inherit (config.system.service.network) link;
            inherit (config.system.service) bridge;
          in rec {
            en70000 = link.build {
              # in armada-38x.dtsi this is eth0.
              # It's connected to port 5 of the 88E6176 switch
              devpath = "/devices/platform/soc/soc:internal-regs/f1070000.ethernet";
              # name is unambiguous but not very semantic
              ifname = "en70000";
            };
            en30000 = link.build {
              # in armada-38x.dtsi this is eth1
              # It's connected to port 6 of the 88E6176 switch
              devpath = "/devices/platform/soc/soc:internal-regs/f1030000.ethernet";
              # name is unambiguous but not very semantic
              ifname = "en30000";
            };
            # the default (from the dts? I'm guessing) behavour for
            # lan ports on the switch is to attach them to
            # en30000. It should be possible to do something better,
            # per
            # https://www.kernel.org/doc/html/latest/networking/dsa/configuration.html#affinity-of-user-ports-to-cpu-ports
            # but apparently OpenWrt doesn't either so maybe it's more
            # complicated than it looks

            wan = link.build {
              # in armada-38x.dtsi this is eth2. It may be connected to
              # an ethernet phy or to the SFP cage, depending on a gpio
              devpath = "/devices/platform/soc/soc:internal-regs/f1034000.ethernet";
              ifname = "wan";
            };

            lan = link.build {
              ifname = "lan1";
            };

            wlan = link.build {
              ifname = "wlan0";
              dependencies = [ mac80211 ];
            };
            wlan5 = link.build {
              ifname = "wlan1";
              dependencies = [ mac80211 ];
            };
          };
      };

  };
}