liminix/devices/gl-ar750/default.nix

# GL.INet GL-AR750 "Creta" travel router
#  - QCA9531 @650Mhz SoC
#  - dual band wireless: IEEE 802.11a/b/g/n/ac
#  - two 10/100Mbps LAN ports and one WAN
#  - 128MB DDR2 RAM / 16MB  NOR Flash
#  - "ath79" soc family
# https://www.gl-inet.com/products/gl-ar750/

# I like GL.iNet devices because they're relatively accessible to
# DIY users: the serial port connections have headers preinstalled
# and don't need soldering

# Mainline linux 5.19 doesn't have device-tree support for this device
# or even for the SoC, so we use the extensive OpenWrt kernel patches

{
  system = {
    crossSystem = {
      config = "mips-unknown-linux-musl";
      gcc = {
        abi = "32";
        arch = "mips32";          # maybe mips_24kc-
      };
    };
  };

  module = {pkgs, ... }:
    let
      openwrt = pkgs.pkgsBuildBuild.fetchFromGitHub {
        name = "openwrt-source";
        repo = "openwrt";
        owner = "openwrt";
        rev = "a5265497a4f6da158e95d6a450cb2cb6dc085cab";
        hash = "sha256-YYi4gkpLjbOK7bM2MGQjAyEBuXJ9JNXoz/JEmYf8xE8=";
      };
    in {
      device = {
        defaultOutput = "directory";
        loadAddress = "0x80060000";
        entryPoint  = "0x80060000";
      };

      kernel = {
        src = pkgs.pkgsBuildBuild.fetchurl {
          name = "linux.tar.gz";
          url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.71.tar.gz";
          hash = "sha256-yhO2cXIeIgUxkSZf/4aAsF11uxyh+UUZu6D1h92vCD8=";
        };
        extraPatchPhase = ''
          cp -av ${openwrt}/target/linux/generic/files/* .
          chmod -R u+w .
          cp -av ${openwrt}/target/linux/ath79/files/* .
          chmod -R u+w .
          patches() {
            for i in $* ; do patch --batch --forward -p1 < $i ;done
          }
          patches ${openwrt}/target/linux/generic/backport-5.15/*.patch
          patches ${openwrt}/target/linux/generic/pending-5.15/*.patch
          patches ${openwrt}/target/linux/generic/hack-5.15/*.patch
          patches ${openwrt}/target/linux/ath79/patches-5.15/*.patch
        '';
        dts = "${openwrt}/target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts";
        config = {
          MIPS_ELF_APPENDED_DTB = "y";
          OF = "y";
          USE_OF = "y";
          ATH79 = "y";

          SERIAL_8250_CONSOLE = "y";
          SERIAL_8250 = "y";
          SERIAL_CORE_CONSOLE = "y";

          # need this to open console device at boot. dmesg goes from
          # [    0.272934] Warning: unable to open an initial console.
          # to
          # [    0.247413] printk: console [ttyS0] disabled
          # [     0.25200] 18020000.uart: ttyS0 at MMIO 0x1802000 (irq = 10, base_baud = 1562500) is a 16550A
          SERIAL_OF_PLATFORM = "y";

          CONSOLE_LOGLEVEL_DEFAULT = "8";
          CONSOLE_LOGLEVEL_QUIET = "4";

          # "empty" initramfs source should create an initial
          # filesystem that has a /dev/console node and not much
          # else.  Note that pid 1 is started *before* the root
          # filesystem is mounted and it expects /dev/console to
          # be present already
          BLK_DEV_INITRD = "n";

          NET = "y";
          NETDEVICES = "y";
          ETHERNET = "y";
          NET_VENDOR_ATHEROS = "y";
          AG71XX = "y";             # ethernet (qca,qca9530-eth)
          MFD_SYSCON = "y";         # ethernet (compatible "syscon")
          AR8216_PHY = "y";         # eth1 is behind a switch

          MTD = "y";
          MTD_CMDLINE_PARTS = "y";
          MTD_BLOCK = "y";          # fix undefined ref to register_mtd_blktrans_devs
          CPU_BIG_ENDIAN= "y";

          # this is all copied from nixwrt ath79 config. Clearly not all
          # of it is device config, some of it is wifi config or
          # installation method config or ...

          "CMDLINE_PARTITION" = "y";
          "EARLY_PRINTK" = "y";
          "FW_LOADER" = "y";
          # we don't have a user helper, so we get multiple 60s pauses
          # at boot time unless we disable trying to call it
          "FW_LOADER_USER_HELPER" = "n";

          "MODULE_SIG" = "y";

          "PARTITION_ADVANCED" = "y";
          "PRINTK_TIME" = "y";
          "SQUASHFS" = "y";
          "SQUASHFS_XZ" = "y";
        };
      };
    };
}