Daniel Barlow
f9f934b40c
spell GL.iNet consistently in docs
2023-09-28 23:22:54 +01:00
Daniel Barlow
7e13eda490
add hardware device descriptions to doc
...
most of the text is recycled and follows no particular format
2023-09-28 12:17:30 +01:00
Daniel Barlow
3a2f074199
disable 4k flash erase blocks everywhere
2023-09-27 22:10:17 +01:00
Daniel Barlow
bca0c9b26b
gl-mt300a use regular-sized flash erase blocks
2023-09-26 16:43:03 +01:00
Daniel Barlow
f75995e895
introduce modules/arch/{mipsel,mipseb}.nix
...
for settings that are common to all mipse[lb] but would not be shared
with e.g. aarch64 or x86
2023-09-20 17:30:05 +01:00
Daniel Barlow
35c7f1643f
change defaultOutput for hardware devices to flashimage
...
if you're using tftpboot you probably know what you're doing
2023-09-17 17:00:45 +01:00
Daniel Barlow
70fb9f86d3
mt300a vlan interface services depend on primary
2023-09-17 17:00:38 +01:00
Daniel Barlow
e04ec2e959
move SWCONFIG defn into per-device files
...
it doesn't work on qemu
2023-08-31 23:50:07 +01:00
Daniel Barlow
b094220466
mt300a: use module-based network services for lan/wan
2023-08-31 18:27:07 +01:00
Daniel Barlow
333327be75
make a module for vlan
...
Acked-by: Daniel Barlow <<dan@telent.net>>
2023-08-30 23:26:44 +01:00
Daniel Barlow
efa1919e04
move squashfs kernel options into module
2023-08-30 22:59:28 +01:00
Daniel Barlow
de77635490
move bridge-related kernel config to the module
2023-08-30 17:29:42 +01:00
Daniel Barlow
2e50368bd2
rename config.outputs to config.system.outputs
...
New rules: everything under "config" that isn't actually configuration
(e.g. build products) will in future live in config.system. This is
the first step.
2023-07-13 19:24:59 +01:00
Daniel Barlow
4cfaed7303
specify root device as /dev/mtdblockn
...
the (openwrt?) magic that autodetects it based on mtd labels
won't work with a two-stage boot
2023-04-26 22:16:15 +01:00
Daniel Barlow
2f3b108ef1
tftpboot: set phram erase block size to match hardware
...
this is needed for tftp boot with a jffs2 filesystem
2023-04-23 21:24:37 +01:00
Daniel Barlow
633a4f8003
move BLK_DEV_INITRD to base.nix
2023-04-10 22:57:50 +01:00
Daniel Barlow
efd878dc5e
extract common code for patching kernel source fdorm openwrt
2023-03-18 19:17:58 +00:00
Daniel Barlow
ce05f4e44c
extract phram.mtd ramdisk support from tftpboot module
...
also rename tftproot output to tftpboot for consistency
2023-03-18 14:30:10 +00:00
Daniel Barlow
f36d8ef1d0
make mt300a flash-ready
2023-03-08 20:35:41 +00:00
Daniel Barlow
85b5edc39d
vlan interfaces depend on parent
2023-03-08 20:34:39 +00:00
Daniel Barlow
d290965711
shuffle kernel config for gl-mt300a
2023-03-07 22:49:33 +00:00
Daniel Barlow
e8d5e4c788
move regulatory.db to wlan module
2023-03-07 21:32:21 +00:00
Daniel Barlow
c046c39613
wlan support for mt300a
2023-03-07 19:11:12 +00:00
Daniel Barlow
e86e9430fc
vlans and mt300a wired network interfaces
2023-03-07 19:10:12 +00:00
Daniel Barlow
e0ea576674
rename "device" config tree as "hardware"
...
we are also using "device" for "network device" (as in eth0,
wlan0 etc) so this makes it a bit less confusing perhaps
2023-03-03 22:52:33 +00:00
Daniel Barlow
263882cbe4
move dts config option from boot to device
2023-03-03 22:43:44 +00:00
Daniel Barlow
41ff5a1fe6
move FW_LOADER* config to modules/base
2023-03-01 18:16:01 +00:00
Daniel Barlow
f2e5f65149
add wireless support for hardware devices
...
* gl-ar750 the ath9k works, ath10k is untested
* gl-mt300[an] build but may not boot
2023-02-22 19:17:47 +00:00
Daniel Barlow
a2d8eaf95d
make kernel config visually consistent: symbols are unquoted
2023-02-22 18:28:48 +00:00
Daniel Barlow
4faf529dc3
define kernel MODULE_SIG everywhere
2023-02-22 18:20:56 +00:00
Daniel Barlow
817c3793d4
move dts config from kernel to boot
...
The kernel does not need to know about the DTS. I am prepared
to be very slightly injured on this hill.
2023-02-18 15:13:19 +00:00
Daniel Barlow
5b51aa0826
tftp load address is per-device, IP addresses are local config
2023-02-15 22:06:28 +00:00
Daniel Barlow
dd8c8edd9c
rewrite phram boot to use correct sizes and offsets
2023-02-15 22:06:28 +00:00
Daniel Barlow
1a08aaad01
move outputs into a module
2023-02-10 23:10:44 +00:00
Daniel Barlow
0a06319d0c
make loadAddress and entryPoint device configuration
...
... already having second thoughts about loadAddress
2023-02-10 18:20:01 +00:00
Daniel Barlow
8cead61740
convert devices from overlay to module
...
this makes it possible for devices to stash things in
`config` (e.g. pathname to DTS) that can later be overwritten
(even by the end user)
2023-02-10 17:54:33 +00:00
Daniel Barlow
afd9bbbc80
building but untested kernels for gl-mt300a, gl-mt300n-v2
2023-02-06 23:19:53 +00:00