Daniel Barlow
beb6e260d4
PoC support for hardware watchdog
2023-03-23 13:18:05 +00:00
Daniel Barlow
efd878dc5e
extract common code for patching kernel source fdorm openwrt
2023-03-18 19:17:58 +00:00
Daniel Barlow
ce05f4e44c
extract phram.mtd ramdisk support from tftpboot module
...
also rename tftproot output to tftpboot for consistency
2023-03-18 14:30:10 +00:00
Daniel Barlow
3f11a3c708
gl-ar750 gpio support is required for USB to work
...
_legacy_ gpio sysfs interface is required by the openwrt
ath79 phy usb driver
2023-03-18 14:30:10 +00:00
Daniel Barlow
e8d5e4c788
move regulatory.db to wlan module
2023-03-07 21:32:21 +00:00
Daniel Barlow
38756af1c1
add in_outputs shell function which ensures umask is set
2023-03-03 23:07:03 +00:00
Daniel Barlow
e0ea576674
rename "device" config tree as "hardware"
...
we are also using "device" for "network device" (as in eth0,
wlan0 etc) so this makes it a bit less confusing perhaps
2023-03-03 22:52:33 +00:00
Daniel Barlow
263882cbe4
move dts config option from boot to device
2023-03-03 22:43:44 +00:00
Daniel Barlow
6d191b73ae
add outputs.flashable - flashable firmware.bin
2023-03-02 23:01:26 +00:00
Daniel Barlow
adc198b3af
WIP push to see what passes
2023-03-01 22:24:58 +00:00
Daniel Barlow
259f5c767b
ath10k kernel support and and firmware
...
- some firmware from kvalo repository
- a service to extract calibration data ART partition
- missing kernel symbol to enable PCI support
2023-03-01 21:08:47 +00:00
Daniel Barlow
41ff5a1fe6
move FW_LOADER* config to modules/base
2023-03-01 18:16:01 +00:00
Daniel Barlow
f2e5f65149
add wireless support for hardware devices
...
* gl-ar750 the ath9k works, ath10k is untested
* gl-mt300[an] build but may not boot
2023-02-22 19:17:47 +00:00
Daniel Barlow
a2d8eaf95d
make kernel config visually consistent: symbols are unquoted
2023-02-22 18:28:48 +00:00
Daniel Barlow
4faf529dc3
define kernel MODULE_SIG everywhere
2023-02-22 18:20:56 +00:00
Daniel Barlow
10aeb5e464
add notes about dual-band hardware
2023-02-19 18:14:27 +00:00
Daniel Barlow
81ccd11347
gl-ar750: support _actual_ mtd/spi not just fake one
...
the ath9k driver needs MTD because that's where it looks for
firmware/calibration data (ART partition)
2023-02-19 18:13:38 +00:00
Daniel Barlow
817c3793d4
move dts config from kernel to boot
...
The kernel does not need to know about the DTS. I am prepared
to be very slightly injured on this hill.
2023-02-18 15:13:19 +00:00
Daniel Barlow
5b51aa0826
tftp load address is per-device, IP addresses are local config
2023-02-15 22:06:28 +00:00
Daniel Barlow
dd8c8edd9c
rewrite phram boot to use correct sizes and offsets
2023-02-15 22:06:28 +00:00
Daniel Barlow
1a08aaad01
move outputs into a module
2023-02-10 23:10:44 +00:00
Daniel Barlow
0a06319d0c
make loadAddress and entryPoint device configuration
...
... already having second thoughts about loadAddress
2023-02-10 18:20:01 +00:00
Daniel Barlow
8cead61740
convert devices from overlay to module
...
this makes it possible for devices to stash things in
`config` (e.g. pathname to DTS) that can later be overwritten
(even by the end user)
2023-02-10 17:54:33 +00:00
Daniel Barlow
eaf90df56c
per-device dts
2023-02-06 23:19:35 +00:00
Daniel Barlow
76243d306c
remove checkedConfig, check all the config
2022-10-19 22:09:38 +01:00
Daniel Barlow
0a46ba7fc3
move some wifi-related comments into wlan module
2022-10-19 17:36:31 +01:00
Daniel Barlow
f1b7780537
speed up kernel build
...
by having two separate derivations for patching the kernel source tree
and building it, we have to copy said source trees from one store
location to another which takes non-neglible time on spinning rust
(literally minutes on my machine). Replace with a single derivation
that can do more things on one tree in-place
2022-10-19 17:34:22 +01:00
Daniel Barlow
3ff9e49085
enable eth1
2022-10-18 15:48:29 +01:00
Daniel Barlow
c2bcf2dd3e
fixup 4b513cd
2022-10-18 15:47:27 +01:00
Daniel Barlow
45d52a6c99
tidy kconfig a bit
2022-10-16 15:31:10 +01:00
Daniel Barlow
4b513cdb98
use openwrt kernel for gl-ar750
2022-10-16 15:15:18 +01:00
Daniel Barlow
77922c875b
add per-device overlay
...
presently this is used to reference the appropriate kernel and (if
needed) openwrt source trees, but I would not be surprised if we find
other uses
2022-10-15 18:55:33 +01:00
