151 lines
4.2 KiB
Nix
151 lines
4.2 KiB
Nix
# GL.INet GL-MT300A
|
|
|
|
{
|
|
system = {
|
|
crossSystem = {
|
|
config = "mipsel-unknown-linux-musl";
|
|
gcc = {
|
|
abi = "32";
|
|
arch = "mips32"; # maybe mips_24kc-
|
|
};
|
|
};
|
|
};
|
|
|
|
description = ''
|
|
WiFi on this device is provided by the rt2800soc module. It
|
|
expects firmware to be present in the "factory" MTD partition, so
|
|
- assuming we want to use the wireless - we need to build MTD
|
|
support into the kernel even if we're using TFTP root
|
|
'';
|
|
|
|
module = { pkgs, config, ...}:
|
|
let
|
|
inherit (pkgs.liminix.networking) interface;
|
|
inherit (pkgs) openwrt;
|
|
mac80211 = pkgs.mac80211.override {
|
|
drivers = ["rt2800soc"];
|
|
klibBuild = config.system.outputs.kernel.modulesupport;
|
|
};
|
|
in {
|
|
hardware = {
|
|
defaultOutput = "tftpboot";
|
|
loadAddress = "0x80000000";
|
|
entryPoint = "0x80000000";
|
|
|
|
# Creating 5 MTD partitions on "spi0.0":
|
|
# 0x000000000000-0x000000030000 : "u-boot"
|
|
# 0x000000030000-0x000000040000 : "u-boot-env"
|
|
# 0x000000040000-0x000000050000 : "factory"
|
|
# 0x000000050000-0x000000fd0000 : "firmware"
|
|
# 2 uimage-fw partitions found on MTD device firmware
|
|
# Creating 2 MTD partitions on "firmware":
|
|
# 0x000000000000-0x000000260000 : "kernel"
|
|
# 0x000000260000-0x000000f80000 : "rootfs"
|
|
|
|
flash = {
|
|
address = "0xbc050000";
|
|
size ="0xf80000";
|
|
eraseBlockSize = "65536";
|
|
};
|
|
rootDevice = "/dev/mtdblock5";
|
|
|
|
dts = {
|
|
src = "${openwrt.src}/target/linux/ramips/dts/mt7620a_glinet_gl-mt300a.dts";
|
|
includes = [
|
|
"${openwrt.src}/target/linux/ramips/dts"
|
|
];
|
|
};
|
|
networkInterfaces = rec {
|
|
# lan and wan ports are both behind a switch on eth0
|
|
eth = interface { device = "eth0"; };
|
|
lan = interface {
|
|
type = "vlan";
|
|
device = "eth0.1";
|
|
link = "eth0";
|
|
id = "1";
|
|
dependencies = [eth];
|
|
};
|
|
wan = interface {
|
|
type = "vlan";
|
|
device = "eth0.2";
|
|
id = "2";
|
|
link = "eth0";
|
|
dependencies = [eth];
|
|
};
|
|
wlan = interface {
|
|
device = "wlan0";
|
|
dependencies = [ mac80211 ];
|
|
};
|
|
};
|
|
};
|
|
boot.tftp = {
|
|
loadAddress = "0x00A00000";
|
|
};
|
|
|
|
kernel = {
|
|
src = pkgs.fetchurl {
|
|
name = "linux.tar.gz";
|
|
url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.71.tar.gz";
|
|
hash = "sha256-yhO2cXIeIgUxkSZf/4aAsF11uxyh+UUZu6D1h92vCD8=";
|
|
};
|
|
extraPatchPhase = ''
|
|
${openwrt.applyPatches.ramips}
|
|
'';
|
|
config = {
|
|
MIPS_ELF_APPENDED_DTB = "y";
|
|
OF = "y";
|
|
USE_OF = "y";
|
|
|
|
RALINK = "y";
|
|
PCI = "y";
|
|
SOC_MT7620 = "y";
|
|
|
|
SERIAL_8250_CONSOLE = "y";
|
|
SERIAL_8250 = "y";
|
|
SERIAL_CORE_CONSOLE = "y";
|
|
SERIAL_OF_PLATFORM = "y";
|
|
|
|
CONSOLE_LOGLEVEL_DEFAULT = "8";
|
|
CONSOLE_LOGLEVEL_QUIET = "4";
|
|
|
|
NET = "y";
|
|
NETDEVICES = "y";
|
|
ETHERNET = "y";
|
|
NET_VENDOR_RALINK = "y";
|
|
NET_RALINK_MDIO = "y";
|
|
NET_RALINK_MDIO_MT7620 = "y";
|
|
NET_RALINK_MT7620 = "y";
|
|
|
|
SPI = "y";
|
|
MTD_SPI_NOR = "y";
|
|
SPI_MT7621 = "y"; # } probably don't need both of these
|
|
SPI_RT2880 = "y"; # }
|
|
SPI_MASTER= "y";
|
|
SPI_MEM= "y";
|
|
|
|
# both the ethernet ports on this device (lan and wan)
|
|
# are behind a switch, so we need VLANs to do anything
|
|
# useful with them
|
|
|
|
VLAN_8021Q = "y";
|
|
SWCONFIG = "y";
|
|
SWPHY = "y";
|
|
|
|
MTD = "y";
|
|
MTD_CMDLINE_PARTS = "y";
|
|
MTD_BLOCK = "y"; # fix undefined ref to register_mtd_blktrans_devs
|
|
|
|
CPU_LITTLE_ENDIAN = "y";
|
|
|
|
CMDLINE_PARTITION = "y";
|
|
EARLY_PRINTK = "y";
|
|
|
|
NEW_LEDS = "y";
|
|
LEDS_CLASS = "y"; # required by rt2x00lib
|
|
|
|
PARTITION_ADVANCED = "y";
|
|
PRINTK_TIME = "y";
|
|
};
|
|
};
|
|
};
|
|
}
|