130 lines
4.3 KiB
Nix
130 lines
4.3 KiB
Nix
# GL.INet GL-AR750 "Creta" travel router
|
|
# - QCA9531 @650Mhz SoC
|
|
# - dual band wireless: IEEE 802.11a/b/g/n/ac
|
|
# - two 10/100Mbps LAN ports and one WAN
|
|
# - 128MB DDR2 RAM / 16MB NOR Flash
|
|
# - "ath79" soc family
|
|
# https://www.gl-inet.com/products/gl-ar750/
|
|
|
|
# I like GL.iNet devices because they're relatively accessible to
|
|
# DIY users: the serial port connections have headers preinstalled
|
|
# and don't need soldering
|
|
|
|
# Mainline linux 5.19 doesn't have device-tree support for this device
|
|
# or even for the SoC, so we use the extensive OpenWrt kernel patches
|
|
|
|
{
|
|
system = {
|
|
crossSystem = {
|
|
config = "mips-unknown-linux-musl";
|
|
gcc = {
|
|
abi = "32";
|
|
arch = "mips32"; # maybe mips_24kc-
|
|
};
|
|
};
|
|
};
|
|
|
|
# We need to be able to import default.nix before we import nixpkgs
|
|
# because it has the system config to tell nixpkgs what arch to build for.
|
|
# But we also need some way to do things like fetchFromGitHub in the
|
|
# per-device config and we can only do that once we have a reference to
|
|
# pkgs
|
|
|
|
overlay = final: prev:
|
|
let
|
|
openwrt = final.fetchFromGitHub {
|
|
name = "openwrt-source";
|
|
repo = "openwrt";
|
|
owner = "openwrt";
|
|
rev = "a5265497a4f6da158e95d6a450cb2cb6dc085cab";
|
|
hash = "sha256-YYi4gkpLjbOK7bM2MGQjAyEBuXJ9JNXoz/JEmYf8xE8=";
|
|
};
|
|
in {
|
|
kernel = prev.kernel.override {
|
|
src = final.fetchurl {
|
|
name = "linux.tar.gz";
|
|
url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.71.tar.gz";
|
|
hash = "sha256-yhO2cXIeIgUxkSZf/4aAsF11uxyh+UUZu6D1h92vCD8=";
|
|
};
|
|
extraPatchPhase = ''
|
|
cp -av ${openwrt}/target/linux/generic/files/* .
|
|
chmod -R u+w .
|
|
cp -av ${openwrt}/target/linux/ath79/files/* .
|
|
chmod -R u+w .
|
|
patches() {
|
|
for i in $* ; do patch --batch --forward -p1 < $i ;done
|
|
}
|
|
patches ${openwrt}/target/linux/generic/backport-5.15/*.patch
|
|
patches ${openwrt}/target/linux/generic/pending-5.15/*.patch
|
|
patches ${openwrt}/target/linux/generic/hack-5.15/*.patch
|
|
patches ${openwrt}/target/linux/ath79/patches-5.15/*.patch
|
|
'';
|
|
};
|
|
};
|
|
kernel = rec {
|
|
dts = { openwrt,... }:"${openwrt}/target/linux/ath79/dts/qca9531_glinet_gl-ar750.dts";
|
|
config = {
|
|
MIPS_ELF_APPENDED_DTB = "y";
|
|
OF = "y";
|
|
USE_OF = "y";
|
|
ATH79 = "y";
|
|
|
|
SERIAL_8250_CONSOLE = "y";
|
|
SERIAL_8250 = "y";
|
|
SERIAL_CORE_CONSOLE = "y";
|
|
|
|
# need this to open console device at boot. dmesg goes from
|
|
# [ 0.272934] Warning: unable to open an initial console.
|
|
# to
|
|
# [ 0.247413] printk: console [ttyS0] disabled
|
|
# [ 0.25200] 18020000.uart: ttyS0 at MMIO 0x1802000 (irq = 10, base_baud = 1562500) is a 16550A
|
|
SERIAL_OF_PLATFORM = "y";
|
|
|
|
CONSOLE_LOGLEVEL_DEFAULT = "8";
|
|
CONSOLE_LOGLEVEL_QUIET = "4";
|
|
|
|
# "empty" initramfs source should create an initial
|
|
# filesystem that has a /dev/console node and not much
|
|
# else. Note that pid 1 is started *before* the root
|
|
# filesystem is mounted and it expects /dev/console to
|
|
# be present already
|
|
BLK_DEV_INITRD = "n";
|
|
|
|
NET = "y";
|
|
NETDEVICES = "y";
|
|
ETHERNET = "y";
|
|
NET_VENDOR_ATHEROS = "y";
|
|
AG71XX = "y"; # ethernet (qca,qca9530-eth)
|
|
MFD_SYSCON = "y"; # ethernet (compatible "syscon")
|
|
AR8216_PHY = "y"; # eth1 is behind a switch
|
|
|
|
MTD = "y";
|
|
MTD_CMDLINE_PARTS = "y";
|
|
MTD_BLOCK = "y"; # fix undefined ref to register_mtd_blktrans_devs
|
|
CPU_BIG_ENDIAN= "y";
|
|
|
|
# this is all copied from nixwrt ath79 config. Clearly not all
|
|
# of it is device config, some of it is wifi config or
|
|
# installation method config or ...
|
|
|
|
"CMDLINE_PARTITION" = "y";
|
|
"EARLY_PRINTK" = "y";
|
|
"FW_LOADER" = "y";
|
|
# we don't have a user helper, so we get multiple 60s pauses
|
|
# at boot time unless we disable trying to call it
|
|
"FW_LOADER_USER_HELPER" = "n";
|
|
|
|
"MODULE_SIG" = "y";
|
|
|
|
"PARTITION_ADVANCED" = "y";
|
|
"PRINTK_TIME" = "y";
|
|
"SQUASHFS" = "y";
|
|
"SQUASHFS_XZ" = "y";
|
|
};
|
|
};
|
|
outputs.default = "directory";
|
|
boot = {
|
|
loadAddress = "0x80060000";
|
|
entryPoint = "0x80060000";
|
|
};
|
|
}
|