Daniel Barlow
2ad203ce1f
delete unused functoins in liminix-tools
2023-08-21 19:29:00 +01:00
Daniel Barlow
648ea5613b
use module-based-service for hostapd
2023-07-16 17:51:50 +01:00
Daniel Barlow
669af24247
make a module for dnsmasq
2023-07-14 23:18:21 +01:00
Daniel Barlow
df6cfe1cd5
move pppoe service derivation into ppp module dir
2023-07-14 21:35:59 +01:00
Daniel Barlow
682183a88d
move typeChecked into pkgs.liminix.lib
2023-07-14 20:22:29 +01:00
Daniel Barlow
69e6eb5a89
accept attr args to pppoe service, and typecheck them
...
We use (abuse, arguably) the nixos module system for typechecking. Un
the plus side, it gives us documentation of the options and their
expected types. On the downside, the error message doesn't tell us
the file in which the error was encountered.
(This is subject to change, if I can find a better way)
2023-07-14 16:53:36 +01:00
Daniel Barlow
b6e72504d6
ipv6 default route
...
needs to specify the ppp0 *peer* address not the local address
2023-06-30 10:17:33 +01:00
Daniel Barlow
447f068569
partly support getting IPv6 addresses
...
- gets interface id from ppp
- runs odhcpc to get RA and prefix delegation
- doesn't do anything useful with the data yet
2023-05-24 23:01:50 +01:00
Daniel Barlow
a4e1dcedd3
redirect stderr
2023-03-10 23:39:53 +00:00
Daniel Barlow
225fc6fe51
configurable busybox
...
allows modules to add to the busybox applets and change config
2023-03-10 18:40:45 +00:00
Daniel Barlow
91c0147919
set hostname before dhcp client runs
2023-03-08 22:11:59 +00:00
Daniel Barlow
70f8f5ecfd
remove hostapd debugging flag
2023-03-07 19:11:25 +00:00
Daniel Barlow
e86e9430fc
vlans and mt300a wired network interfaces
2023-03-07 19:10:12 +00:00
Daniel Barlow
06687a819a
udhcpc notify when ready
2023-03-07 19:06:40 +00:00
Daniel Barlow
f9f9720ba7
${!foo} doesn't work in ash, switch to printenv
2023-03-07 19:05:58 +00:00
Daniel Barlow
1565a8414d
remove inadvertant references to bash
2023-03-06 17:48:31 +00:00
Daniel Barlow
a8cb872859
add service name to log lines
2023-03-04 23:08:25 +00:00
Daniel Barlow
5427456c21
rename notificationFd to notification-fd
...
it's perfectly valid syntax and consistent with the s6 spelling
2023-03-04 21:19:30 +00:00
Daniel Barlow
38756af1c1
add in_outputs shell function which ensures umask is set
2023-03-03 23:07:03 +00:00
Daniel Barlow
adc198b3af
WIP push to see what passes
2023-03-01 22:24:58 +00:00
Daniel Barlow
fc4f726dd6
make hostapd service depend on its interface
2023-03-01 18:16:01 +00:00
Daniel Barlow
626a365f79
replace waitup with more generally useful ifwait
...
* wait for $interface present before ip link set up dev
* wait for wlan0 running before adding to bridge
2023-03-01 18:16:01 +00:00
Daniel Barlow
ea2c5e158d
add missing argument
2023-02-26 17:54:58 +00:00
Daniel Barlow
c37332910a
add option to provide dnsmasq resolv-file from a service
2023-02-25 22:53:50 +00:00
Daniel Barlow
59ce03630a
consistent ownership/permissions for /run/service-state/**
2023-02-25 22:53:06 +00:00
Daniel Barlow
228b270385
pppoe: capture nameserver addresses as outputs
2023-02-25 20:31:41 +00:00
Daniel Barlow
3b75cadb20
improve bridge support
...
instead of a bridge specifiying its members (not ideal if they're
not all always up), the member interfaces specify their primary
2023-02-24 23:49:05 +00:00
Daniel Barlow
3e1082ad18
allow interface service to specify dependencies
2023-02-22 19:18:59 +00:00
Daniel Barlow
e9f04931fa
improve syntax for accessing service outputs
2022-10-02 16:35:55 +01:00
Daniel Barlow
f030efbd49
extract "service" function to reduce duplicated code
2022-10-02 14:44:29 +01:00
Daniel Barlow
da8866a01a
first pass at a hostapd service, rough around the edges
2022-10-02 10:04:35 +01:00
Daniel Barlow
c320d0afc7
add dnsmasq and example config for it
...
would be good to move more of this into a module, but that
doesn't sit well with the (potential) ability to run more than one
dnsmasq service, as modules are singletons
2022-09-28 21:33:18 +01:00
Daniel Barlow
dfdaa27f39
make ppp log to stderr not syslog
2022-09-27 22:57:06 +01:00
Daniel Barlow
0632b5102e
remove .service/.target/.bundle etc suffixes on service names
...
they don't seem to be providing value
2022-09-27 22:56:53 +01:00
Daniel Barlow
5e573cef09
squashfs builder just needs filesystem not entire config
2022-09-27 22:06:36 +01:00
Daniel Barlow
af4cd2e05c
make mksquashfs fail on error
2022-09-27 17:36:25 +01:00
Daniel Barlow
5d10a9e760
rename config.environment as config.filesystem
2022-09-27 16:48:17 +01:00
Daniel Barlow
696bbe6521
rename systemPackages as defaultProfile.packages
...
it doesn't work the same way as in nixos, so don't name it the same way
2022-09-27 16:47:42 +01:00
Daniel Barlow
4cbe669783
move make-image to subdirectory
2022-09-27 16:47:42 +01:00
Daniel Barlow
7803eebfd4
add a "route" service
2022-09-26 13:44:40 +01:00
Daniel Barlow
676c94782b
separate files for networking and services
2022-09-26 12:26:54 +01:00
Daniel Barlow
9902d4052b
add a type definiton for s6-rc modules
2022-09-26 11:46:09 +01:00
Daniel Barlow
5d51d15b86
working pppoe with readiness notification on ip-up
2022-09-25 21:12:50 +01:00
Daniel Barlow
a34a3ade08
make udhcp wait for its interface to be ready
2022-09-25 21:10:57 +01:00
Daniel Barlow
3677ab9cb3
move service state out of s6 scandir
...
getting weird permission errors, seems simpler all raound just to
put them somewhere else
2022-09-25 21:10:04 +01:00
Daniel Barlow
1d9f39bf87
support notification-fd file in longrun
2022-09-25 21:06:08 +01:00
Daniel Barlow
92e42f1d45
fix oneshot "up" and "down" files
...
they're supposed to be names of executables, not text of
shell scripts
2022-09-25 21:02:10 +01:00
Daniel Barlow
3540f594b1
address service: rename addr->address & add prefixLength
...
these names are consistent with nixos
2022-09-25 16:51:13 +01:00
Daniel Barlow
c1835d97ee
add pppoe
2022-09-25 11:54:31 +01:00
Daniel Barlow
1bc8fd7873
remove trace output
2022-09-22 12:45:41 +01:00
