Daniel Barlow
03aec58c2c
add "waitup", s6 readiness helper for network interfaces
...
run e.g. "waitup wlan0 10" to wait until wlan0 is operationally
up and running, and then send a newline to file descriptor 10
2023-02-24 23:22:28 +00:00
Daniel Barlow
3e1082ad18
allow interface service to specify dependencies
2023-02-22 19:18:59 +00:00
Daniel Barlow
751920c8fc
qemu: switch to building wireless as kernel modules
...
This is a hefty change
* add support for kernel backports project
* build wireless stack/drivers as modules from a backported kernel
* create a service to load/unload the modules
2023-02-22 18:41:41 +00:00
Daniel Barlow
891db9edc5
kernel derivation: add output for module support
2023-02-22 18:33:17 +00:00
Daniel Barlow
05576eeb94
harcode paths for kpppoed, add port num in config
2023-02-17 00:09:02 +00:00
Daniel Barlow
b438a0fd17
handlersocket must be bound before calling select()
...
this is due to a rather odd (imo) decision in luasocket which
says that the underlying socket (and therefore its file
descriptor) isn't actually created until we call something
that lets it work out whether ipv4 or ipv6
2023-02-15 22:06:28 +00:00
Daniel Barlow
2388e4ca24
recvfrom(-1) is not the same as recvfrom()
2023-02-15 22:06:28 +00:00
Daniel Barlow
f98b9c5c97
add README to say where Tufted came from
2023-02-15 22:06:28 +00:00
Daniel Barlow
1a29e2ba0f
use locally modified tftp.lua instead of upstream tufty
2023-02-15 22:06:28 +00:00
Daniel Barlow
118f78f334
remove "using luasocket" message
2023-02-15 22:06:28 +00:00
Daniel Barlow
a258456f25
check return value of bind
...
is common to forget to run this as root, in which case we would like
to see the permission denied error when it tries to open port 69
2023-02-15 22:06:28 +00:00
Daniel Barlow
71e37f1b96
update listen docstring
2023-02-15 22:06:28 +00:00
Daniel Barlow
55688c14ed
pass remote host and port to callback as params 2..3
...
This allows the callback to handle the response differently
depending on who is asking - for example, to refuse requests
from clients on a blocklist
2023-02-15 22:06:28 +00:00
Daniel Barlow
59c0881235
remove unhelpful debug message
2023-02-15 22:06:28 +00:00
Daniel Barlow
1b372bcb2b
simpler eof handling
2023-02-15 22:06:28 +00:00
Daniel Barlow
b84a6e0aa5
fix poll() to not mutate its parameter
2023-02-15 22:06:28 +00:00
Daniel Barlow
d729709869
remove nixio support
2023-02-15 22:06:28 +00:00
Daniel Barlow
740314b329
added at 3cb95c869e2fe74cc61ca303d88af6c5daad6734
2023-02-15 22:06:28 +00:00
Daniel Barlow
e84833e52f
WIP create VM for pppoe and tftpd
2023-02-15 22:06:28 +00:00
Daniel Barlow
8cead61740
convert devices from overlay to module
...
this makes it possible for devices to stash things in
`config` (e.g. pathname to DTS) that can later be overwritten
(even by the end user)
2023-02-10 17:54:33 +00:00
Daniel Barlow
1dc9770dbc
turn run-qemu.sh and connect-qemu scripts into buildEnv commands
2023-02-08 22:49:10 +00:00
Daniel Barlow
4addcbbd51
turn run-qemu.sh script into mips-vm buildEnv command
2023-02-08 22:17:06 +00:00
Daniel Barlow
cc7daeabb3
add routeros to overlay
2023-02-08 18:13:35 +00:00
Daniel Barlow
52d8c03ddd
update tufted for nixpkgs fennel changes
2023-02-07 23:42:19 +00:00
Daniel Barlow
76243d306c
remove checkedConfig, check all the config
2022-10-19 22:09:38 +01:00
Daniel Barlow
9c5b5a54e2
remove unneeded Kconfig.local handling
2022-10-19 18:23:20 +01:00
Daniel Barlow
f1b7780537
speed up kernel build
...
by having two separate derivations for patching the kernel source tree
and building it, we have to copy said source trees from one store
location to another which takes non-neglible time on spinning rust
(literally minutes on my machine). Replace with a single derivation
that can do more things on one tree in-place
2022-10-19 17:34:22 +01:00
Daniel Barlow
e7987c9520
add build-host tftp server
2022-10-04 23:08:43 +01:00
Daniel Barlow
e9f04931fa
improve syntax for accessing service outputs
2022-10-02 16:35:55 +01:00
Daniel Barlow
f030efbd49
extract "service" function to reduce duplicated code
2022-10-02 14:44:29 +01:00
Daniel Barlow
da8866a01a
first pass at a hostapd service, rough around the edges
2022-10-02 10:04:35 +01:00
Daniel Barlow
c320d0afc7
add dnsmasq and example config for it
...
would be good to move more of this into a module, but that
doesn't sit well with the (potential) ability to run more than one
dnsmasq service, as modules are singletons
2022-09-28 21:33:18 +01:00
Daniel Barlow
dfdaa27f39
make ppp log to stderr not syslog
2022-09-27 22:57:06 +01:00
Daniel Barlow
0632b5102e
remove .service/.target/.bundle etc suffixes on service names
...
they don't seem to be providing value
2022-09-27 22:56:53 +01:00
Daniel Barlow
5e573cef09
squashfs builder just needs filesystem not entire config
2022-09-27 22:06:36 +01:00
Daniel Barlow
e2650aa162
add pppoe derivation, replacing override
...
we use a custom installPhase so we don't drag in a bunch of
scripts that we don't need and don't work
2022-09-27 22:04:22 +01:00
Daniel Barlow
af4cd2e05c
make mksquashfs fail on error
2022-09-27 17:36:25 +01:00
Daniel Barlow
5d10a9e760
rename config.environment as config.filesystem
2022-09-27 16:48:17 +01:00
Daniel Barlow
696bbe6521
rename systemPackages as defaultProfile.packages
...
it doesn't work the same way as in nixos, so don't name it the same way
2022-09-27 16:47:42 +01:00
Daniel Barlow
4cbe669783
move make-image to subdirectory
2022-09-27 16:47:42 +01:00
Daniel Barlow
e40a91fca0
move all remaining pseudofiles to base module
2022-09-27 14:06:07 +01:00
Daniel Barlow
797aa30c47
make s6-init-files into a module
2022-09-27 10:19:44 +01:00
Daniel Barlow
09a9dba963
export "dir" and "symlink" from pseudofiles package
2022-09-26 18:27:43 +01:00
Daniel Barlow
c6c6b51893
make s6-rc-database a package
2022-09-26 15:59:21 +01:00
Daniel Barlow
d5ccecf038
make "shutdown" work
...
create a package for the s6-compatible shutdown/halt/poweroff
commands and put it on the path ahead of busybox
2022-09-26 14:13:23 +01:00
Daniel Barlow
7803eebfd4
add a "route" service
2022-09-26 13:44:40 +01:00
Daniel Barlow
676c94782b
separate files for networking and services
2022-09-26 12:26:54 +01:00
Daniel Barlow
9902d4052b
add a type definiton for s6-rc modules
2022-09-26 11:46:09 +01:00
Daniel Barlow
5d51d15b86
working pppoe with readiness notification on ip-up
2022-09-25 21:12:50 +01:00
Daniel Barlow
a34a3ade08
make udhcp wait for its interface to be ready
2022-09-25 21:10:57 +01:00
