create gateway profile by extracting from rotuer example

examples/extneder.nix

@@ -12,6 +12,7 @@
   ...
 }: let
   secrets = import ./extneder-secrets.nix;
+  svc = config.system.service;
 in rec {
   boot = {
     tftp = {
@@ -23,6 +24,7 @@ in rec {
   imports = [
     "${modulesPath}/profiles/wap.nix"
     "${modulesPath}/vlan"
+    "${modulesPath}/ssh"
   ];
 
   hostname = "extneder";
@@ -45,6 +47,7 @@ in rec {
     };
   };
 
+  services.sshd = svc.ssh.build {};
   users.root.passwd = lib.mkForce secrets.root.passwd;
   defaultProfile.packages = with pkgs; [nftables strace tcpdump swconfig];
 }

examples/rotuer.nix

@@ -6,23 +6,18 @@
 # problems.
 
 
-{ config, pkgs, lib, ... } :
+{ config, pkgs, lib, modulesPath, ... } :
 let
   secrets = {
     domainName = "fake.liminix.org";
     firewallRules = {};
   } // (import ./rotuer-secrets.nix);
-  inherit (pkgs.liminix.services) oneshot longrun bundle;
+  inherit (pkgs.liminix.services) oneshot bundle;
   inherit (pkgs) serviceFns;
   svc = config.system.service;
   wirelessConfig =  {
     country_code = "GB";
     inherit (secrets) wpa_passphrase;
-    auth_algs = 1; # 1=wpa2, 2=wep, 3=both
-    wpa = 2;       # 1=wpa, 2=wpa2, 3=both
-    wpa_key_mgmt = "WPA-PSK";
-    wpa_pairwise = "TKIP CCMP";   # auth for wpa (may not need this?)
-    rsn_pairwise = "CCMP";        # auth for wpa2
     wmm_enabled = 1;
   };
 
@@ -36,65 +31,64 @@ in rec {
   };
 
   imports = [
-    ../modules/wlan.nix
+    "${modulesPath}/profiles/gateway.nix"
-    ../modules/network
+    "${modulesPath}/schnapps"
-    ../modules/ppp
+    "${modulesPath}/outputs/btrfs.nix"
-    ../modules/dnsmasq
+    "${modulesPath}/outputs/extlinux.nix"
-    ../modules/dhcp6c
-    ../modules/firewall
-    ../modules/hostapd
-    ../modules/bridge
-    ../modules/ntp
-    ../modules/schnapps
-    ../modules/ssh
-    ../modules/outputs/btrfs.nix
-    ../modules/outputs/extlinux.nix
   ];
   hostname = "rotuer";
   rootfsType = "btrfs";
   rootOptions = "subvol=@";
   boot.loader.extlinux.enable = true;
 
-  services.hostap = svc.hostapd.build {
+  profile.gateway = {
-    interface = config.hardware.networkInterfaces.wlan;
+    lan = {
-    params = {
+      interfaces =  with config.hardware.networkInterfaces;
-      ssid = secrets.ssid;
+        [
-      hw_mode="g";
+          wlan wlan5
-      channel = "2";
+          lan0 lan1 lan2 lan3 lan4
-      ieee80211n = 1;
+        ];
-    } // wirelessConfig;
+      inherit (secrets.lan) prefix;
-  };
+      address = {
-
+        family = "inet"; address ="${secrets.lan.prefix}.1"; prefixLength = 24;
-  services.hostap5 = svc.hostapd.build {
+      };
-    interface = config.hardware.networkInterfaces.wlan5;
+      dhcp = {
-    params = rec {
+        start = 10;
-      ssid = "${secrets.ssid}5";
+        end = 240;
-      hw_mode="a";
+        hosts = { } // lib.optionalAttrs (builtins.pathExists ./static-leases.nix) (import ./static-leases.nix);
-      channel = 36;
+        localDomain = "lan";
-      ht_capab = "[HT40+]";
+      };
-      vht_oper_chwidth = 1;
+    };
-      vht_oper_centr_freq_seg0_idx = channel + 6;
+    wan = {
-      ieee80211n = 1;
+      interface = config.hardware.networkInterfaces.wan;
-      ieee80211ac = 1;
+      username = secrets.l2tp.name;
-    } // wirelessConfig;
+      password = secrets.l2tp.password;
-  };
+      dhcp6.enable = true;
-
+    };
-  services.int = svc.network.address.build {
+    firewall = {
-    interface = svc.bridge.primary.build { ifname = "int"; };
+      enable = true;
-    family = "inet"; address ="${secrets.lan.prefix}.1"; prefixLength = 24;
+      rules =
-  };
+        let defaults = import ./demo-firewall.nix;
-
+        in lib.recursiveUpdate defaults secrets.firewallRules;
-  services.bridge =  svc.bridge.members.build {
+    };
-    primary = services.int;
+    wireless.networks = {
-    members = with config.hardware.networkInterfaces;
+      "${secrets.ssid}" = {
-      [ wlan
+        interface = config.hardware.networkInterfaces.wlan;
-        wlan5
+        hw_mode="g";
-        lan0
+        channel = "2";
-        lan1
+        ieee80211n = 1;
-        lan2
+      } // wirelessConfig;
-        lan3
+      "${secrets.ssid}5" = rec {
-        lan4
+        interface = config.hardware.networkInterfaces.wlan5;
-      ];
+        hw_mode="a";
+        channel = 36;
+        ht_capab = "[HT40+]";
+        vht_oper_chwidth = 1;
+        vht_oper_centr_freq_seg0_idx = channel + 6;
+        ieee80211n = 1;
+        ieee80211ac = 1;
+      } // wirelessConfig;
+    };
   };
 
   services.ntp = svc.ntp.build {
@@ -106,95 +100,6 @@ in rec {
 
   users.root = secrets.root;
 
-  services.dns =
-    let interface = services.int;
-    in svc.dnsmasq.build {
-      resolvconf = services.resolvconf;
-      inherit interface;
-      ranges = [
-        "${secrets.lan.prefix}.10,${secrets.lan.prefix}.240"
-        # ra-stateless: sends router advertisements with the O and A
-        # bits set, and provides a stateless DHCP service. The client
-        # will use a SLAAC address, and use DHCP for other
-        # configuration information.
-        "::,constructor:$(output ${interface} ifname),ra-stateless"
-      ];
-
-      # You can add static addresses for the DHCP server here.  I'm
-      # not putting my actual MAC addresses in a public git repo ...
-      hosts = { } // lib.optionalAttrs (builtins.pathExists ./static-leases.nix) (import ./static-leases.nix);
-      upstreams = [ "/${secrets.domainName}/" ];
-      domain = secrets.domainName;
-    };
-
-  services.wan = svc.pppoe.build {
-    interface = config.hardware.networkInterfaces.wan;
-    ppp-options = [
-      "debug" "+ipv6" "noauth"
-      "name" secrets.l2tp.name
-      "password" secrets.l2tp.password
-    ];
-  };
-
-  services.resolvconf = oneshot rec {
-    dependencies = [ services.wan ];
-    name = "resolvconf";
-    up = ''
-      . ${serviceFns}
-      ( in_outputs ${name}
-       echo "nameserver $(output ${services.wan} ns1)" > resolv.conf
-       echo "nameserver $(output ${services.wan} ns2)" >> resolv.conf
-       chmod 0444 resolv.conf
-      )
-    '';
-  };
-
-  filesystem =
-    let inherit (pkgs.pseudofile) dir symlink;
-    in dir {
-      etc = dir {
-        "resolv.conf" = symlink "${services.resolvconf}/.outputs/resolv.conf";
-      };
-    };
-
-  services.defaultroute4 = svc.network.route.build {
-    via = "$(output ${services.wan} address)";
-    target = "default";
-    dependencies = [ services.wan ];
-  };
-
-  services.defaultroute6 = svc.network.route.build {
-    via = "$(output ${services.wan} ipv6-peer-address)";
-    target = "default";
-    interface = services.wan;
-  };
-
-  services.firewall = svc.firewall.build {
-    ruleset =
-      let defaults = import ./demo-firewall.nix;
-      in lib.recursiveUpdate defaults secrets.firewallRules;
-  };
-
-  services.packet_forwarding = svc.network.forward.build { };
-
-  services.dhcp6c =
-    let client = svc.dhcp6c.client.build {
-          interface = services.wan;
-        };
-    in bundle {
-      name = "dhcp6c";
-      contents = [
-        (svc.dhcp6c.prefix.build {
-          inherit client;
-          interface = services.int;
-        })
-        (svc.dhcp6c.address.build {
-          inherit client;
-          interface = services.wan;
-        })
-      ];
-    };
-
   defaultProfile.packages = with pkgs; [
     min-collect-garbage
     nftables

modules/profiles/gateway.nix

@@ -0,0 +1,178 @@
+{ config, pkgs, lib, ... } :
+let
+  svc = config.system.service;
+  cfg = config.profile.gateway;
+  inherit (lib) mkOption mkEnableOption mkIf mdDoc types optional optionals;
+  inherit (pkgs) liminix serviceFns;
+  inherit (liminix.services) bundle oneshot;
+  hostaps =
+    let
+      defaults = {
+        auth_algs = 1; # 1=wpa2, 2=wep, 3=both
+        wpa = 2; # 1=wpa, 2=wpa2, 3=both
+        wpa_key_mgmt = "WPA-PSK";
+        wpa_pairwise = "TKIP CCMP"; # auth for wpa (may not need this?)
+        rsn_pairwise = "CCMP"; # auth for wpa2
+      };
+    in lib.mapAttrs'
+      (name : value :
+        let
+          attrs = defaults // { ssid = name; } // value;
+        in lib.nameValuePair
+          "hostap-${name}"
+          (svc.hostapd.build {
+            interface = attrs.interface;
+            params = lib.filterAttrs (k: v: k != "interface") attrs;
+          }))
+      cfg.wireless.networks;
+in {
+
+  options.profile.gateway = {
+    lan = {
+      interfaces = mkOption {
+        type = types.listOf liminix.lib.types.interface;
+        default = [];
+      };
+      address = mkOption {
+        type = types.attrs;
+      };
+      prefix = mkOption { type = types.str; };
+      dhcp = {
+        start = mkOption { type = types.int; };
+        end = mkOption { type = types.int; };
+        hosts = mkOption { type = types.attrs; };
+        localDomain = mkOption { type = types.str; };
+      };
+    };
+
+    firewall = {
+      enable = mkEnableOption "firewall";
+      rules = mkOption { type = types.attrsOf types.attrs; };
+    };
+
+    wan = {
+      interface = mkOption { type = liminix.lib.types.interface; };
+      username = mkOption { type = types.str; };
+      password =  mkOption { type = types.str; };
+      dhcp6.enable = mkOption { type = types.bool; };
+    };
+
+    wireless = mkOption {
+      type = types.attrsOf types.anything;
+    };
+  };
+
+  imports = [
+    ../wlan.nix
+    ../network
+    ../ppp
+    ../dnsmasq
+    ../dhcp6c
+    ../firewall
+    ../hostapd
+    ../bridge
+    ../ntp
+    ../ssh
+    { config.services = hostaps; }
+  ];
+
+  config = {
+    services.int = svc.network.address.build ({
+      interface = svc.bridge.primary.build { ifname = "int"; };
+    } // cfg.lan.address);
+
+    services.bridge =  svc.bridge.members.build {
+      primary = config.services.int;
+      members = cfg.lan.interfaces;
+    };
+
+    services.wan = svc.pppoe.build {
+      inherit (cfg.wan) interface;
+      ppp-options = [
+        "debug" "+ipv6" "noauth"
+        "name" cfg.wan.username
+        "password" cfg.wan.password
+      ];
+    };
+
+    services.packet_forwarding = svc.network.forward.build { };
+
+    services.dhcp6c =
+      let
+        client = svc.dhcp6c.client.build {
+          interface = config.services.wan;
+        };
+        bundl = bundle {
+          name = "dhcp6c";
+          contents = [
+            (svc.dhcp6c.prefix.build {
+              inherit client;
+              interface = config.services.int;
+            })
+            (svc.dhcp6c.address.build {
+              inherit client;
+              interface = config.services.wan;
+            })
+          ];
+        };
+      in mkIf cfg.wan.dhcp6.enable bundl;
+
+    services.dns =
+      let interface = config.services.int;
+          dcfg = cfg.lan.dhcp;
+      in svc.dnsmasq.build {
+        resolvconf = config.services.resolvconf;
+        inherit interface;
+        ranges = [
+          "${cfg.lan.prefix}.${toString dcfg.start},${cfg.lan.prefix}.${toString dcfg.end}"
+          # ra-stateless: sends router advertisements with the O and A
+          # bits set, and provides a stateless DHCP service. The client
+          # will use a SLAAC address, and use DHCP for other
+          # configuration information.
+          "::,constructor:$(output ${interface} ifname),ra-stateless"
+        ];
+
+        hosts = dcfg.hosts;
+        upstreams = [ "/${dcfg.localDomain}/" ];
+        domain = dcfg.localDomain;
+      };
+
+    services.defaultroute4 = svc.network.route.build {
+      via = "$(output ${config.services.wan} address)";
+      target = "default";
+      dependencies = [ config.services.wan ];
+    };
+
+    services.defaultroute6 = svc.network.route.build {
+      via = "$(output ${config.services.wan} ipv6-peer-address)";
+      target = "default";
+      interface = config.services.wan;
+    };
+
+    services.firewall = mkIf cfg.firewall.enable
+      (svc.firewall.build {
+        ruleset = cfg.firewall.rules;
+      });
+
+    services.resolvconf = oneshot rec {
+      dependencies = [ config.services.wan ];
+      name = "resolvconf";
+      up = ''
+        . ${serviceFns}
+        ( in_outputs ${name}
+         echo "nameserver $(output ${config.services.wan} ns1)" > resolv.conf
+         echo "nameserver $(output ${config.services.wan} ns2)" >> resolv.conf
+         chmod 0444 resolv.conf
+        )
+      '';
+    };
+
+    filesystem =
+      let inherit (pkgs.pseudofile) dir symlink;
+      in dir {
+        etc = dir {
+          "resolv.conf" = symlink "${config.services.resolvconf}/.outputs/resolv.conf";
+        };
+      };
+  };
+ }

modules/profiles/wap.nix

@@ -40,7 +40,6 @@ in {
     ../network
     ../hostapd
     ../bridge
-    ../ssh
     { config.services = hostaps; }
   ];
 
@@ -54,7 +53,6 @@ in {
     };
   };
   config = {
-    services.sshd = svc.ssh.build {};
 
     services.int = svc.bridge.primary.build {
       ifname = "int";