use regular kernel not backports for mac80211

the kernel on most devices is now newer than the version that the
backported drivers were backported from

devices/belkin-rt3200/default.nix

@@ -149,6 +149,13 @@
         WATCHDOG = "y";
         MEDIATEK_WATCHDOG = "y";
       };
+      conditionalConfig = {
+        WLAN= {
+          MT7615E = "m";
+          MT7622_WMAC = "y";
+          MT7915E = "m";
+        };
+      };
     };
     boot = {
       commandLine = [ "console=ttyS0,115200" ];
@@ -169,12 +176,9 @@
     hardware =
       let
         openwrt = pkgs.openwrt;
-        mac80211 =  pkgs.mac80211.override {
+        mac80211 =  pkgs.kmodloader.override {
-          drivers = [
+          targets = ["mt7615e" "mt7915e"];
-            "mt7615e"
+          inherit (config.system.outputs) kernel;
-            "mt7915e"
-          ];
-          klibBuild = config.system.outputs.kernel.modulesupport;
         };
       in {
         ubi = {

devices/gl-ar750/default.nix

@@ -71,9 +71,9 @@
           cp $blobdir/board.bin  $out/ath10k/QCA9887/hw1.0/
         '';
       };
-      mac80211 = pkgs.mac80211.override {
+      mac80211 = pkgs.kmodloader.override {
-        drivers = ["ath9k" "ath10k_pci"];
+        targets = ["ath9k" "ath10k_pci"];
-        klibBuild = config.system.outputs.kernel.modulesupport;
+        inherit (config.system.outputs) kernel;
       };
       ath10k_cal_data =
         let
@@ -211,14 +211,21 @@
           WATCHDOG = "y";
           ATH79_WDT = "y";  # watchdog timer
 
-          # this is all copied from nixwrt ath79 config. Clearly not all
-          # of it is device config, some of it is wifi config or
-          # installation method config or ...
-
           EARLY_PRINTK = "y";
 
           PRINTK_TIME = "y";
         };
+        conditionalConfig = {
+          WLAN = {
+            WLAN_VENDOR_ATH = "y";
+            ATH_COMMON = "m";
+            ATH9K = "m";
+            ATH9K_AHB = "y";
+            ATH10K = "m";
+            ATH10K_PCI = "y";
+            ATH10K_DEBUG = "y";
+          };
+        };
       };
     };
 }

devices/gl-mt300a/default.nix

@@ -47,9 +47,9 @@
     let
       inherit (pkgs.liminix.networking) interface;
       inherit (pkgs) openwrt;
-      mac80211 = pkgs.mac80211.override {
+      mac80211 = pkgs.kmodloader.override {
-        drivers = ["rt2800soc"];
+        targets = ["rt2800soc"];
-        klibBuild = config.system.outputs.kernel.modulesupport;
+        inherit (config.system.outputs) kernel;
       };
     in {
       imports = [
@@ -178,6 +178,14 @@
         } // lib.optionalAttrs (config.system.service ? vlan) {
           SWCONFIG = "y";
         };
+        conditionalConfig = {
+          WLAN = {
+            WLAN_VENDOR_RALINK = "y";
+            RT2800SOC = "m";
+            RT2X00 = "m";
+          };
+        };
+
       };
     };
 }

devices/gl-mt300n-v2/default.nix

@@ -43,9 +43,9 @@
       inherit (pkgs.pseudofile) dir symlink;
       inherit (pkgs) openwrt;
 
-      mac80211 = pkgs.mac80211.override {
+      mac80211 = pkgs.kmodloader.override {
-        drivers = ["mt7603e"];
+        targets = ["mt7603e"];
-        klibBuild = config.system.outputs.kernel.modulesupport;
+        inherit (config.system.outputs) kernel;
       };
       wlan_firmware = pkgs.fetchurl {
         url = "https://github.com/openwrt/mt76/raw/f24b56f935392ca1d35fae5fd6e56ef9deda4aad/firmware/mt7628_e2.bin";
@@ -185,6 +185,15 @@
           RALINK_WDT = "y";  # watchdog
           MT7621_WDT = "y";  # or it might be this one
         };
+        conditionalConfig = {
+          WLAN = {
+            WLAN_VENDOR_RALINK = "y";
+            WLAN_VENDOR_MEDIATEK = "y";
+            MT7603E = "m";
           };
         };
+
+      };
+
+    };
 }

devices/tp-archer-ax23/default.nix

@@ -325,6 +325,11 @@
             RALINK_WDT = "y";  # watchdog
             MT7621_WDT = "y";  # or it might be this one
           };
+          conditionalConfig = {
+            WLAN = {
+              MT7915E = "m";
+            };
+          };
         };
         tplink-safeloader.board = "ARCHER-AX23-V1";
         boot = {
@@ -353,11 +358,11 @@
       hardware =
         let
           openwrt = pkgs.openwrt;
-          mac80211 =  pkgs.mac80211.override {
+          mac80211 =  pkgs.kmodloader.override {
-            drivers = [
+            targets = [
               "mt7915e"
             ];
-            klibBuild = config.system.outputs.kernel.modulesupport;
+            inherit (config.system.outputs) kernel;
           };
         in {
           # from OEM bootlog (openwrt wiki):

devices/turris-omnia/default.nix

@@ -286,9 +286,17 @@
               USB_XHCI_MVEBU = "y";
               USB_XHCI_HCD = "y";
             };
+            WLAN = {
+              WLAN_VENDOR_ATH = "y";
+              ATH_COMMON = "m";
+              ATH9K = "m";
+              ATH9K_PCI = "y";
+              ATH10K = "m";
+              ATH10K_PCI = "m";
+              ATH10K_DEBUG = "y";
+            };
           };
         };
-
         boot = {
           commandLine = [
             "console=ttyS0,115200"
@@ -328,9 +336,9 @@
         };
 
         hardware = let
-          mac80211 = pkgs.mac80211.override {
+          mac80211 =  pkgs.kmodloader.override {
-            drivers = ["ath9k_pci" "ath10k_pci"];
+            inherit (config.system.outputs) kernel;
-            klibBuild = config.system.outputs.kernel.modulesupport;
+            targets = ["ath9k" "ath10k_pci"];
           };
         in {
           defaultOutput = "mtdimage";

modules/wlan.nix

@@ -46,6 +46,14 @@ in {
         CRYPTO_SHA1 = "y";
         ENCRYPTED_KEYS = "y";
         KEYS = "y";
+
+        WLAN = "y";
+        CFG80211 = "m";
+        MAC80211 = "m";
+        EXPERT = "y";
+        CFG80211_CERTIFICATION_ONUS = "y";
+        CFG80211_REQUIRE_SIGNED_REGDB = "n"; # depends on ONUS
+        CFG80211_CRDA_SUPPORT = "n";
       };
     };
   };