Merge pull request 'Add support for TP-Link Archer AX23' (#6) from raboof/liminix:add-archer-ax23-v1-bak into main

Reviewed-on: https://gti.telent.net/dan/liminix/pulls/6

modules/outputs.nix

@@ -60,6 +60,9 @@ in
           Combined kernel and FDT in uImage (U-Boot compatible) format
         '';
       };
+      tplink-safeloader = mkOption {
+        type = types.package;
+      };
       u-boot = mkOption {
         type = types.package;
       };

modules/outputs/tplink-safeloader.nix

@@ -0,0 +1,61 @@
+{
+  config
+, pkgs
+, lib
+, ...
+}:
+let
+  inherit (lib) mkOption types concatStringsSep;
+  o = config.system.outputs;
+  cfg = config.tplink-safeloader;
+in {
+  options.tplink-safeloader = {
+    board = mkOption {
+      type = types.str;
+    };
+  };
+  options.system.outputs = {
+    tplink-safeloader = mkOption {
+      type = types.package;
+      description = ''
+        tplink-safeloader
+        *****************
+
+        For creating 'safeloader' images for tp-link devices.
+
+        These can be flashed to the device using the firmware update feature
+        in the TP-link web UI or the OEM bootloader recovery: Use something
+        sharp to hold the 'reset' button while turning on the router until
+        only the orange LED remains lit. The router will assume IP address
+        192.168.0.1 and expect you to take 192.168.0.5 on one of the LAN ports.
+        On NixOS, use something like::
+
+            networking.interfaces.enp0s20f0u1c2 = {
+              ipv4.addresses = [ {
+                address = "192.168.0.5";
+                prefixLength = 24;
+              } ];
+            };
+            networking.networkmanager = {
+                unmanaged = [ "enp0s20f0u1c2" ];
+            };
+
+        This connection is rather somewhat temperamental, it may take a couple
+        of attempts, possibly re-attaching the USB dongle and running
+        ``systemctl restart network-start.service``. The web interface does not
+        give accurate feedback (the progress bar is a lie), so you may want
+        to upload the firmware using ``curl -F firmware=@result http://192.168.0.1/f2.htm``.
+        After this shows a 'success' JSON, the image still needs to be
+        transferred from memory to flash, so be patient.
+      '';
+    };
+  };
+  config = {
+    system.outputs = rec {
+      tplink-safeloader =
+        pkgs.runCommand "tplink" { nativeBuildInputs = with pkgs.pkgsBuildBuild; [ firmware-utils ];  } ''
+        tplink-safeloader -B "${cfg.board}" -k "${o.uimage}" -r "${o.rootfs}" -o $out
+        '';
+    };
+  };
+}