liminix/devices/turris-omnia/default.nix

{
  description = ''
    Turris Omnia
    ************
  '';

  system = {
    crossSystem = {
      config = "armv7l-unknown-linux-musleabihf";
    };
  };

  module = {pkgs, config, lib, lim, ... }:
    let openwrt = pkgs.openwrt;
    in {
      imports = [
        ../../modules/arch/arm.nix
        ../../modules/outputs/tftpboot.nix
        ../../modules/outputs/ext4fs.nix
        ../../modules/outputs/mbrimage.nix
        ../../modules/outputs/extlinux.nix
      ];
      config = {
        kernel = {
          src = pkgs.pkgsBuildBuild.fetchurl {
            name = "linux.tar.gz";
            url = "https://cdn.kernel.org/pub/linux/kernel/v5.x/linux-5.15.71.tar.gz";
            hash = "sha256-yhO2cXIeIgUxkSZf/4aAsF11uxyh+UUZu6D1h92vCD8=";
          };
          extraPatchPhase = ''
          ${pkgs.openwrt.applyPatches.mvebu}
        '';
          config = {
            PCI = "y";
            OF = "y";
            MEMORY = "y"; # for MVEBU_DEVBUS
            DMADEVICES = "y"; # for MV_XOR
            CPU_V7 = "y";
            ARCH_MULTIPLATFORM = "y";
            ARCH_MVEBU = "y";
            ARCH_MULTI_V7= "y";
            PCI_MVEBU = "y";
            AHCI_MVEBU = "y";
            MACH_ARMADA_38X = "y";
            SMP = "y";
	          # this is disabled for the moment because it relies on a GCC
            # plugin that requires gmp.h to build, and I can't see right now
            # how to confgure it to find gmp
            STACKPROTECTOR_PER_TASK = "n";
            NR_CPUS = "4";
            VFP = "y";
            NEON= "y";

            # WARNING: unmet direct dependencies detected for ARCH_WANT_LIBATA_LEDS
            ATA = "y";

            PSTORE = "y";
            PSTORE_RAM = "y";
            PSTORE_CONSOLE = "y";
            PSTORE_DEFLATE_COMPRESS = "n";

            SERIAL_8250 = "y";
            SERIAL_8250_CONSOLE = "y";
            SERIAL_OF_PLATFORM="y";
            SERIAL_MVEBU_UART = "y";
            SERIAL_MVEBU_CONSOLE = "y";

            SERIAL_8250_DMA= "y";
            SERIAL_8250_DW= "y";
            SERIAL_8250_EXTENDED= "y";
            SERIAL_8250_MANY_PORTS= "y";
            SERIAL_8250_SHARE_IRQ= "y";
            OF_ADDRESS= "y";
            OF_MDIO= "y";

            WATCHDOG = "y";        # watchdog is enabled by u-boot
            ORION_WATCHDOG = "y";  # so is non-optional to keep feeding

            MVEBU_DEVBUS = "y"; # "Device Bus controller ...  flash devices such as NOR, NAND, SRAM, and FPGA"
            MVMDIO = "y";
            MVNETA = "y";
            MVNETA_BM = "y";
            MVNETA_BM_ENABLE = "y";
            SRAM = "y"; # mmio-sram is "compatible" for bm_bppi reqd by BM
            PHY_MVEBU_A38X_COMPHY = "y"; # for eth2

            MVPP2 = "y";
            MV_XOR = "y";

            NET_DSA = "y";
            NET_DSA_MV88E6XXX = "y"; # depends on PTP_1588_CLOCK_OPTIONAL
          };
        };
        rootfsType = "ext4";
        boot = {
          commandLine = [
            "console=ttyS0,115200"
            "pcie_aspm=off" # ath9k pci incompatible with PCIe ASPM
          ];
          imageFormat = "fit";
        };
        filesystem =
          let
            inherit (pkgs.pseudofile) dir symlink;
            firmware = pkgs.stdenv.mkDerivation {
              name = "wlan-firmware";
              phases = ["installPhase"];
              installPhase = ''
            mkdir $out
            cp -r ${pkgs.linux-firmware}/lib/firmware/ath10k/QCA988X $out
          '';
            };
          in dir {
            lib = dir {
              firmware = dir {
                ath10k = symlink firmware;
              };
            };
          };

        boot.tftp = {
          loadAddress = lim.parseInt "0x1000000";
          kernelFormat = "zimage";
          compressRoot = true;
        };

        hardware = let
          mac80211 = pkgs.mac80211.override {
            drivers = ["ath9k_pci" "ath10k_pci"];
            klibBuild = config.system.outputs.kernel.modulesupport;
          };
        in {
          defaultOutput = "mtdimage";
          loadAddress = lim.parseInt "0x00800000"; # "0x00008000";
          entryPoint = lim.parseInt "0x00800000"; # "0x00008000";
          rootDevice = "/dev/mtdblock0";

          dts = {
            src = "${config.system.outputs.kernel.modulesupport}/arch/arm/boot/dts/armada-385-turris-omnia.dts";
            includes =  [
              "${config.system.outputs.kernel.modulesupport}/arch/arm/boot/dts/"
            ];
          };
          flash.eraseBlockSize = 65536; # only used for tftpboot
          networkInterfaces =
            let
              inherit (config.system.service.network) link;
              inherit (config.system.service) bridge;
            in rec {
              en70000 = link.build {
                # in armada-38x.dtsi this is eth0.
                # It's connected to port 5 of the 88E6176 switch
                devpath = "/devices/platform/soc/soc:internal-regs/f1070000.ethernet";
                # name is unambiguous but not very semantic
                ifname = "en70000";
              };
              en30000 = link.build {
                # in armada-38x.dtsi this is eth1
                # It's connected to port 6 of the 88E6176 switch
                devpath = "/devices/platform/soc/soc:internal-regs/f1030000.ethernet";
                # name is unambiguous but not very semantic
                ifname = "en30000";
              };
              # the default (from the dts? I'm guessing) behavour for
              # lan ports on the switch is to attach them to
              # en30000. It should be possible to do something better,
              # per
              # https://www.kernel.org/doc/html/latest/networking/dsa/configuration.html#affinity-of-user-ports-to-cpu-ports
              # but apparently OpenWrt doesn't either so maybe it's more
              # complicated than it looks

              wan = link.build {
                # in armada-38x.dtsi this is eth2. It may be connected to
                # an ethernet phy or to the SFP cage, depending on a gpio
                devpath = "/devices/platform/soc/soc:internal-regs/f1034000.ethernet";
                ifname = "wan";
              };

              lan = link.build {
                ifname = "lan1";
              };

              wlan = link.build {
                ifname = "wlan0";
                dependencies = [ mac80211 ];
              };
              wlan5 = link.build {
                ifname = "wlan1";
                dependencies = [ mac80211 ];
              };
            };
        };
      };
    };
}