Repurpose the IWINFO_FREQ_NO_2160MHZ define for that, which was
introduced but never used. nl80211 doesn't have such a flag either.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Just use the already provided info instead of mapping frequencies.
Fixes mapping lower frequencies of the 6G band, which starts at 5935MHz.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Required for NL80211_BAND_6GHZ and NL80211_FREQUENCY_ATTR_NO_HE.
Taken from the v5.15.74 release, which is the current version of the
used mac80211 package.
Signed-off-by: Andre Heider <a.heider@gmail.com>
Update using current linux sources, which this was apparently
based on.
Signed-off-by: Andre Heider <a.heider@gmail.com>
[don't fail if no ieee80211ax option is present]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
It's too slow to do it all over again and again, especially with e.g.
luci constantly polling.
Before:
$ time iwinfo phy0 info
real 0m 0.54s
$ time iwinfo radio0 info
real 0m 0.70s
$ time ubus call luci-rpc getWirelessDevices
real 0m 0.67s
After:
$ time iwinfo phy0 info
real 0m 0.04s
$ time iwinfo radio0 info
real 0m 0.09s
$ time ubus call luci-rpc getWirelessDevices
real 0m 0.17s
Signed-off-by: Andre Heider <a.heider@gmail.com>
Add USB PID/VID as found on e.g. Comfast CF-953AX.
Signed-off-by: Andre Heider <a.heider@gmail.com>
[rebase onto current master]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Treat USB vendor and product IDs like PCI subsystem vendor and device IDs
respectively to allow describing USB devices as `0000 0000 $vid $pid` in
the hardware database.
As a side effect, this also skips potentially expensive MTD lookups on
embedded devices with plugged in USB radios.
With a 5.15 kernel, such MTD lookups even spam dmesg with:
mtdblock: MTD device 'factory' is NAND, please consider using UBI block devices instead.
This fix speeds up iwinfo considerably on affected systems:
Before:
sys 0m 3.56s
After:
sys 0m 0.09s
Suggested-by: Andre Heider <a.heider@gmail.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
This isn't required nor used anymore, and it's been +8 years.
See
"735a03be: iwinfo: adjust for changed wpa_supplicant control socket path"
on the main repository.
Signed-off-by: Andre Heider <a.heider@gmail.com>
No data at all can currently be read from the control socket.
Set up the permission exactly like hostapd's wpa_cli utility to fix it.
Among other this fixes a mesh's encryption being shown as "None".
Signed-off-by: Andre Heider <a.heider@gmail.com>
Increase buffer sizes to get rid of e.g.:
iwinfo_nl80211.c:797:41: note: 'snprintf' output between 24 and 279 bytes into a destination of size 64
Signed-off-by: Andre Heider <a.heider@gmail.com>
Remove the assumption that phy names follow the format phy%d and instead look
up the phy index from sysfs properly
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Don't assume a fixed naming pattern. Check all options in this order:
- netdev
- phy name
- wifi device in uci
Use the first one that matches
Signed-off-by: Felix Fietkau <nbd@nbd.name>
`iwinfo.h` says:
#define IWINFO_KMGMT_COUNT 5
...
extern const char *IWINFO_KMGMT_NAMES[IWINFO_KMGMT_COUNT];
Though only only 3 items are defined. The other two were forgotten
when adding WPA3 support. The `auth_suites` table exposed via Lua
never included the items "SAE" and "OWE" until this commit.
Fixes: f8ef450652 ("iwinfo: Add support for WPA3")
Signed-off-by: Tjeu Kayim <15987676+TjeuKayim@users.noreply.github.com>
Don't add the hwmode A for radios which do not support 5GHz operation.
Before, this hwmode was added to all non-VHT radios regardless of their
supported bands.
Fixes commit 562d015326 ("iwinfo: nl80211: fix hwmode parsing for multi-band NICs")
Signed-off-by: David Bauer <mail@david-bauer.net>
In case a NIC supports multiple frequency bands, the supported
hw-modelist might not contain all valid hwmodes, as B/G/AD hwmodes are
only included based on the last parsed supported frequency.
In case a radio supports multiple bands, this might result in these
hwmodes not being flagged as supported.
Circumvent this by tracking all seen frequency bands using a bitmask
which later determined which HW modes are listed as supported.
Signed-off-by: David Bauer <mail@david-bauer.net>
The previous shell script implementation accepted shorter path values
that omitted initial parts before the pcie bus node by only checking if
the configured path is included in the determined path
Add support for doing the same thing here
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This adds 802.11ax HE specific rate information to iwinfo.
Add fields for HE status of a STA as well as DCM and guard interval
fields specific to HE operation.
Signed-off-by: David Bauer <mail@david-bauer.net>
Perform a split wiphy dump when acquiring the hw modelist of a mac80211
device. Otherwise HE capabilities are missing from the message.
This is necessary since upstream commit f8d504caa ("nl80211: reduce
non-split wiphy dump size") (Kernel 5.9).
Signed-off-by: David Bauer <mail@david-bauer.net>
This adds basic support for IEEE 802.11ax when requesting HW or HT
Modelist for a PHY from iwinfo. This way, applications using iwinfo can
detect HE phys.
Signed-off-by: David Bauer <mail@david-bauer.net>
