infrastructure/machines/ap01/_configuration.nix
Ryan Lahfa f952352297 feat(ap01): use levitation for mass rebuilds
To deal with mass rebuild disk space requirements, we can just levitate.

In the future, we will use levitation as a general-purpose mechanism for
partition layout migration, etc.

Signed-off-by: Ryan Lahfa <ryan@dgnum.eu>
2024-12-07 12:11:58 +01:00

259 lines
6.9 KiB
Nix

{
config,
pkgs,
modulesPath,
...
}:
let
inherit (pkgs.liminix.services) oneshot;
inherit (pkgs.pseudofile) symlink dir;
inherit (pkgs) serviceFns;
svc = config.system.service;
secrets-1 = {
ssid = "DGNum 2G prototype (N)";
};
secrets-2 = {
ssid = "DGNum 5G prototype (AX)";
};
baseParams = {
country_code = "FR";
hw_mode = "g";
channel = 6;
wmm_enabled = 1;
ieee80211n = 1;
ht_capab = "[LDPC][GF][HT40-][HT40+][SHORT-GI-40][MAX-AMSDU-7935][TX-STBC]";
auth_algs = 1;
wpa = 2;
wpa_pairwise = "TKIP CCMP";
rsn_pairwise = "CCMP";
};
radiusKeyMgmt = {
wpa_key_mgmt = "WPA-EAP";
};
modernParams = {
hw_mode = "a";
he_su_beamformer = 1;
he_su_beamformee = 1;
he_mu_beamformer = 1;
preamble = 1;
# Allow radar detection.
ieee80211d = 1;
ieee80211h = 1;
ieee80211ac = 1;
ieee80211ax = 1;
vht_capab = "[MAX-MPDU-7991][SU-BEAMFORMEE][SU-BEAMFORMER][RXLDPC][SHORT-GI-80][MAX-A-MPDU-LEN-EXP3][RX-ANTENNA-PATTERN][TX-ANTENNA-PATTERN][TX-STBC-2BY1][RX-STBC-1][MU-BEAMFORMER]";
vht_oper_chwidth = 1;
he_oper_chwidth = 1;
channel = 36;
vht_oper_centr_freq_seg0_idx = 42;
he_oper_centr_freq_seg0_idx = 42;
require_vht = 1;
};
clientRadius = {
ieee8021x = 1;
eapol_version = 2;
use_pae_group_addr = 1;
dynamic_vlan = 0;
vlan_tagged_interface = "lan";
};
externalRadius = {
# TODO: when we have proper IPAM, set the right value here.
own_ip_addr = "127.0.0.1";
nas_identifier = "ap01.dgnum.eu";
# No DNS here, hostapd do not support this mode.
auth_server_addr = "129.199.195.129";
auth_server_port = 1812;
auth_server_shared_secret = "read it online";
};
mkWifiSta =
params: interface: secrets:
svc.hostapd.build {
inherit interface;
package = pkgs.hostapd-radius;
params = params // secrets;
dependencies = [ config.services.jitter ];
};
in
rec {
imports = [
"${modulesPath}/wlan.nix"
"${modulesPath}/network"
"${modulesPath}/dhcp6c"
"${modulesPath}/hostapd"
"${modulesPath}/ssh"
"${modulesPath}/ntp"
"${modulesPath}/vlan"
"${modulesPath}/bridge"
"${modulesPath}/jitter-rng"
"${modulesPath}/pki"
"${modulesPath}/ubus"
../../modules/dgn-access-control.nix
# TODO: god that's so a fucking hack.
(import "${modulesPath}/../devices/zyxel-nwa50ax").module
];
hostname = "ap01-prototype";
# Get moar random please
services.jitter = svc.jitter-rng.build { };
services.ubus = svc.ubus.build { };
# SSH keys are handled by the access control module.
dgn-access-control.enable = true;
users.root = {
passwd = "$6$jVXFFOp8HBYmgINR$lutB4kvw.W1jlXRby9ZYAgBitQ32RxQdYAGN.s2x4ris8J07vM6tzlRBQoeLELOIEMClDzbciQV0itfHQnTqd1";
};
services.int = svc.bridge.primary.build {
ifname = "int";
macAddressFromInterface = config.hardware.networkInterfaces.lan;
};
services.bridge = svc.bridge.members.build {
primary = services.int;
members = {
lan.member = config.hardware.networkInterfaces.lan;
wlan0 = {
member = config.hardware.networkInterfaces.wlan0;
# Bridge only once hostapd is ready.
dependencies = [ config.services.hostap-1-ready ];
};
wlan1 = {
member = config.hardware.networkInterfaces.wlan1;
# Bridge only once hostapd is ready.
dependencies = [ config.services.hostap-2-ready ];
};
};
};
services.resolvconf = oneshot rec {
name = "resolvconf";
up = ''
. ${serviceFns}
( in_outputs ${name}
for i in $(output ${services.dhcpv4} dns); do
echo "nameserver $i" >> resolv.conf
done
)
'';
dependencies = [
config.services.dhcpv4
];
};
filesystem = dir {
etc = dir {
"resolv.conf" = symlink "${config.services.resolvconf}/.outputs/resolv.conf";
"nixpkgs.version" = {
type = "f";
file = "${pkgs.lib.version}";
mode = "0444";
};
};
};
services.dhcpv4 = svc.network.dhcp.client.build {
interface = config.services.int;
dependencies = [
config.services.hostname
config.services.bridge.components.lan
];
};
# TODO(raito): these won't work with RAs
# fix them in Liminix directly and re-enable.
# services.dhcpv6 = svc.dhcp6c.client.build {
# interface = config.services.int;
# dependencies = [
# config.services.hostname
# config.services.bridge
# ];
# };
# services.ipv6 = svc.dhcp6c.address.build {
# interface = config.services.int;
# client = config.services.dhcpv6;
# dependencies = [ config.services.hostname ];
# };
services.defaultroute4 = svc.network.route.build {
via = "$(output ${services.dhcpv4} router)";
target = "default";
dependencies = [ services.dhcpv4 ];
};
services.packet_forwarding = svc.network.forward.build { };
services.sshd = svc.ssh.build { allowRoot = true; };
services.ntp = config.system.service.ntp.build {
pools = {
"pool.ntp.org" = [ "iburst" ];
};
dependencies = [ config.services.jitter ];
};
boot.tftp = {
serverip = "192.0.2.10";
ipaddr = "192.0.2.12";
};
# wlan0 is the 2.4GHz interface.
services.hostap-1 = mkWifiSta (
baseParams // radiusKeyMgmt
) config.hardware.networkInterfaces.wlan0 secrets-1;
services.hostap-1-ready = svc.hostapd-ready.build {
interface = config.hardware.networkInterfaces.wlan0;
};
# wlan1 is the 5GHz interface, e.g. AX capable.
services.hostap-2 = mkWifiSta (
baseParams // clientRadius // externalRadius // radiusKeyMgmt // modernParams
) config.hardware.networkInterfaces.wlan1 secrets-2;
# Oneshot that waits until the hostapd has set the interface in operational state.
services.hostap-2-ready = svc.hostapd-ready.build {
interface = config.hardware.networkInterfaces.wlan1;
};
defaultProfile.packages = with pkgs; [
zyxel-bootconfig
min-collect-garbage
iwinfo
ifwait
# Levitate enable us to mass-reinstall the system on the fly.
(levitate.override {
config = {
imports = [
"${modulesPath}/network"
"${modulesPath}/ssh"
"${modulesPath}/hardware.nix"
"${modulesPath}/kernel"
"${modulesPath}/outputs/tftpboot.nix"
"${modulesPath}/outputs.nix"
];
services = {
# Simplest DHCPv4 we can find.
dhcpv4 = svc.network.dhcp.client.build {
interface = config.hardware.networkInterfaces.lan;
};
inherit (config.services) sshd;
defaultroute4 = svc.network.route.build {
via = "$(output ${services.dhcpv4} router)";
target = "default";
dependencies = [ config.services.dhcpv4 ];
};
};
defaultProfile.packages = [ mtdutils ];
# Only keep root, which should inherit from DGN access control's root permissions.
users.root = config.users.root;
};
})
];
}