feat(vault01): higher MTU

chore(npins): Update dependencies
chore(modules/firewall): Rewrite to simplify
2025-01-08 21:58:22 +01:00 · 2025-01-08 20:17:31 +01:00 · 2025-01-06 00:32:05 +01:00 · 2025-01-06 00:11:58 +01:00 · 2025-01-05 00:14:50 +01:00 · 2025-01-05 00:13:25 +01:00
58 changed files with 2613 additions and 322 deletions
--- a/.forgejo/workflows/eval-nodes.yaml
+++ b/.forgejo/workflows/eval-nodes.yaml
@ -120,6 +120,17 @@ jobs:
        STORE_USER: admin
      name: Build and cache storage01
      run: nix-shell -A eval-nodes --run cache-node
  tower01:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
    - env:
        BUILD_NODE: tower01
        STORE_ENDPOINT: https://tvix-store.dgnum.eu/infra-signing/
        STORE_PASSWORD: ${{ secrets.STORE_PASSWORD }}
        STORE_USER: admin
      name: Build and cache tower01
      run: nix-shell -A eval-nodes --run cache-node
  vault01:
    runs-on: nix
    steps:
--- a/.forgejo/workflows/eval-shell.yaml
+++ b/.forgejo/workflows/eval-shell.yaml
@ -0,0 +1,19 @@
 jobs:
  build-shell:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
    - env:
        STORE_ENDPOINT: https://tvix-store.dgnum.eu/infra-signing/
        STORE_PASSWORD: ${{ secrets.STORE_PASSWORD }}
        STORE_USER: admin
      name: Build and cache shell
      run: nix-shell -A eval-shell --run "nix-build-and-cache -A devShell"
 name: Build the shell
 on:
  pull_request:
    branches:
    - main
  push:
    branches:
    - main
--- a/.forgejo/workflows/npins-update.yaml
+++ b/.forgejo/workflows/npins-update.yaml
@ -1,25 +1,909 @@
 env:
  GIT_AUTHOR_EMAIL: chores@mail.hubrecht.ovh
  GIT_AUTHOR_NAME: HT Chores
  GIT_COMMITTER_EMAIL: chores@mail.hubrecht.ovh
  GIT_COMMITTER_NAME: HT Chores
 jobs:
-  npins_update:
+  agenix:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
-        depth: 0
+        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
-    - name: Update dependencies and open PR if necessary
+    - env:
-      run: "npins update\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n  echo
+        GIT_UPDATE_BRANCH: npins-updates/agenix
-        \"[+] Changes detected, pushing updates.\"\n\n  git switch -C npins-update\n\
+      name: Switch to a new branch
-        \n  git add npins\n\n  git config user.name \"DGNum Chores\"\n  git config
+      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
-        user.email \"tech@dgnum.eu\"\n\n  git commit --message \"chore(npins): Update\"\
+        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
-        \n  git push --set-upstream origin npins-update --force\n\n  # Connect to
+        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
-        the server with the cli\n  tea login add \\\n    -n dgnum-chores \\\n    -t
+        \nfi\n"
-        \"${{ secrets.TEA_DGNUM_CHORES_TOKEN }}\" \\\n    -u https://git.dgnum.eu\n\
+    - env:
-        \n  # Create a pull request if needed\n  # i.e. no PR with the same title
+        COMMIT_MESSAGE: 'chore(npins): Update agenix'
-        exists\n  if [ -z \"$(tea pr ls -f='title,author' -o simple | grep 'chore(npins):
+        GIT_UPDATE_BRANCH: npins-updates/agenix
-        Update dgnum-chores')\" ]; then\n    tea pr create \\\n      --description
+      name: Open a PR if updates are present
-        \"Automatic npins update\" \\\n      --title \"chore(npins): Update\" \\\n\
+      run: "npins update agenix\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
-        \      --head npins-update\n  fi\nfi\n"
+        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
-name: npins update
+        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  arkheon:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/arkheon
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update arkheon'
        GIT_UPDATE_BRANCH: npins-updates/arkheon
      name: Open a PR if updates are present
      run: "npins update arkheon\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  cas-eleves:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/cas-eleves
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update cas-eleves'
        GIT_UPDATE_BRANCH: npins-updates/cas-eleves
      name: Open a PR if updates are present
      run: "npins update cas-eleves\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  cgroup-exporter:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/cgroup-exporter
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update cgroup-exporter'
        GIT_UPDATE_BRANCH: npins-updates/cgroup-exporter
      name: Open a PR if updates are present
      run: "npins update cgroup-exporter\n\nif [ ! -z \"$(git diff --name-only)\"
        ]; then\n  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\
        \n  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  colmena:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/colmena
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update colmena'
        GIT_UPDATE_BRANCH: npins-updates/colmena
      name: Open a PR if updates are present
      run: "npins update colmena\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  dgsi:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/dgsi
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update dgsi'
        GIT_UPDATE_BRANCH: npins-updates/dgsi
      name: Open a PR if updates are present
      run: "npins update dgsi\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n \
        \ echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n \
        \ if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  disko:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/disko
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update disko'
        GIT_UPDATE_BRANCH: npins-updates/disko
      name: Open a PR if updates are present
      run: "npins update disko\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  dns_nix:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/dns.nix
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update dns.nix'
        GIT_UPDATE_BRANCH: npins-updates/dns.nix
      name: Open a PR if updates are present
      run: "npins update dns.nix\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  git-hooks:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/git-hooks
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update git-hooks'
        GIT_UPDATE_BRANCH: npins-updates/git-hooks
      name: Open a PR if updates are present
      run: "npins update git-hooks\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  kadenios:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/kadenios
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update kadenios'
        GIT_UPDATE_BRANCH: npins-updates/kadenios
      name: Open a PR if updates are present
      run: "npins update kadenios\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  kahulm:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/kahulm
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update kahulm'
        GIT_UPDATE_BRANCH: npins-updates/kahulm
      name: Open a PR if updates are present
      run: "npins update kahulm\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  liminix:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/liminix
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update liminix'
        GIT_UPDATE_BRANCH: npins-updates/liminix
      name: Open a PR if updates are present
      run: "npins update liminix\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  linkal:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/linkal
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update linkal'
        GIT_UPDATE_BRANCH: npins-updates/linkal
      name: Open a PR if updates are present
      run: "npins update linkal\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  lix:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/lix
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update lix'
        GIT_UPDATE_BRANCH: npins-updates/lix
      name: Open a PR if updates are present
      run: "npins update lix\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n  echo
        \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n  if [ -n
        \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n    git push
        --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\n    git push
        -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the server with the
        cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  lix-module:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/lix-module
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update lix-module'
        GIT_UPDATE_BRANCH: npins-updates/lix-module
      name: Open a PR if updates are present
      run: "npins update lix-module\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  lon:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/lon
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update lon'
        GIT_UPDATE_BRANCH: npins-updates/lon
      name: Open a PR if updates are present
      run: "npins update lon\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n  echo
        \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n  if [ -n
        \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n    git push
        --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\n    git push
        -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the server with the
        cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  metis:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/metis
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update metis'
        GIT_UPDATE_BRANCH: npins-updates/metis
      name: Open a PR if updates are present
      run: "npins update metis\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  microvm_nix:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/microvm.nix
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update microvm.nix'
        GIT_UPDATE_BRANCH: npins-updates/microvm.nix
      name: Open a PR if updates are present
      run: "npins update microvm.nix\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  nix-actions:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/nix-actions
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update nix-actions'
        GIT_UPDATE_BRANCH: npins-updates/nix-actions
      name: Open a PR if updates are present
      run: "npins update nix-actions\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  nix-modules:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/nix-modules
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update nix-modules'
        GIT_UPDATE_BRANCH: npins-updates/nix-modules
      name: Open a PR if updates are present
      run: "npins update nix-modules\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  nix-pkgs:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/nix-pkgs
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update nix-pkgs'
        GIT_UPDATE_BRANCH: npins-updates/nix-pkgs
      name: Open a PR if updates are present
      run: "npins update nix-pkgs\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  nix-reuse:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/nix-reuse
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update nix-reuse'
        GIT_UPDATE_BRANCH: npins-updates/nix-reuse
      name: Open a PR if updates are present
      run: "npins update nix-reuse\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  nixos-24_05:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/nixos-24.05
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update nixos-24.05'
        GIT_UPDATE_BRANCH: npins-updates/nixos-24.05
      name: Open a PR if updates are present
      run: "npins update nixos-24.05\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  nixos-24_11:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/nixos-24.11
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update nixos-24.11'
        GIT_UPDATE_BRANCH: npins-updates/nixos-24.11
      name: Open a PR if updates are present
      run: "npins update nixos-24.11\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  nixos-generators:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/nixos-generators
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update nixos-generators'
        GIT_UPDATE_BRANCH: npins-updates/nixos-generators
      name: Open a PR if updates are present
      run: "npins update nixos-generators\n\nif [ ! -z \"$(git diff --name-only)\"\
        \ ]; then\n  echo \"[+] Changes detected, pushing updates.\"\n\n  git add
        npins\n\n  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  nixos-unstable:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/nixos-unstable
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update nixos-unstable'
        GIT_UPDATE_BRANCH: npins-updates/nixos-unstable
      name: Open a PR if updates are present
      run: "npins update nixos-unstable\n\nif [ ! -z \"$(git diff --name-only)\" ];
        then\n  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\
        \n  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  nixpkgs:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/nixpkgs
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update nixpkgs'
        GIT_UPDATE_BRANCH: npins-updates/nixpkgs
      name: Open a PR if updates are present
      run: "npins update nixpkgs\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  proxmox-nixos:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/proxmox-nixos
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update proxmox-nixos'
        GIT_UPDATE_BRANCH: npins-updates/proxmox-nixos
      name: Open a PR if updates are present
      run: "npins update proxmox-nixos\n\nif [ ! -z \"$(git diff --name-only)\" ];
        then\n  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\
        \n  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  signal-irc-bridge:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/signal-irc-bridge
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update signal-irc-bridge'
        GIT_UPDATE_BRANCH: npins-updates/signal-irc-bridge
      name: Open a PR if updates are present
      run: "npins update signal-irc-bridge\n\nif [ ! -z \"$(git diff --name-only)\"\
        \ ]; then\n  echo \"[+] Changes detected, pushing updates.\"\n\n  git add
        npins\n\n  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  stateless-uptime-kuma:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/stateless-uptime-kuma
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update stateless-uptime-kuma'
        GIT_UPDATE_BRANCH: npins-updates/stateless-uptime-kuma
      name: Open a PR if updates are present
      run: "npins update stateless-uptime-kuma\n\nif [ ! -z \"$(git diff --name-only)\"\
        \ ]; then\n  echo \"[+] Changes detected, pushing updates.\"\n\n  git add
        npins\n\n  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
  wp4nix:
    runs-on: nix
    steps:
    - uses: actions/checkout@v3
      with:
        fetch-depth: 0
        token: ${{ secrets.TEA_DGNUM_CHORES_TOKEN }}
    - env:
        GIT_UPDATE_BRANCH: npins-updates/wp4nix
      name: Switch to a new branch
      run: "if git ls-remote --exit-code --heads origin \"refs/heads/$GIT_UPDATE_BRANCH\"\
        ; then\n  git switch \"$GIT_UPDATE_BRANCH\"\n  git rebase main\n  echo \"\
        EXISTING_BRANCH=1\" >> $GITHUB_ENV\nelse\n  git switch -C \"$GIT_UPDATE_BRANCH\"\
        \nfi\n"
    - env:
        COMMIT_MESSAGE: 'chore(npins): Update wp4nix'
        GIT_UPDATE_BRANCH: npins-updates/wp4nix
      name: Open a PR if updates are present
      run: "npins update wp4nix\n\nif [ ! -z \"$(git diff --name-only)\" ]; then\n\
        \  echo \"[+] Changes detected, pushing updates.\"\n\n  git add npins\n\n\
        \  if [ -n \"$EXISTING_BRANCH\" ]; then\n    git commit --amend --no-edit\n\
        \    git push --force\n  else\n    git commit --message \"$COMMIT_MESSAGE\"\
        \n    git push -u origin \"$GIT_UPDATE_BRANCH\"\n  fi\n\n  # Connect to the
        server with the cli\n  tea login add -n dgnum-chores -t \"${{ secrets.TEA_DGNUM_CHORES_TOKEN
        }}\" -u https://git.dgnum.eu\n\n  # Create a pull request if needed\n  # i.e.
        no PR with the same title exists\n  if [ -z $(tea pr ls -f='title,author'
        -o simple | grep \"$COMMIT_MESSAGE dgnum-chores\") ]; then\n    tea pr create
        --description \"Automatic npins update\" --title \"$COMMIT_MESSAGE\" --head
        \"$GIT_UPDATE_BRANCH\"\n  fi\nfi\n"
 name: Update dependencies
 on:
  schedule:
-  - cron: 25 15 * * *
+  - cron: 5 16 * * 6
--- a/LICENSES/GPL-3.0-or-later.txt
+++ b/LICENSES/GPL-3.0-or-later.txt
@ -0,0 +1,232 @@
 GNU GENERAL PUBLIC LICENSE
 Version 3, 29 June 2007
 Copyright © 2007 Free Software Foundation, Inc. <https://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed.
 Preamble
 The GNU General Public License is a free, copyleft license for software and other kinds of works.
 The licenses for most software and other practical works are designed to take away your freedom to share and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all versions of a program--to make sure it remains free software for all its users. We, the Free Software Foundation, use the GNU General Public License for most of our software; it applies also to any other work released this way by its authors. You can apply it to your programs, too.
 When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for them if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs, and that you know you can do these things.
 To protect your rights, we need to prevent others from denying you these rights or asking you to surrender the rights. Therefore, you have certain responsibilities if you distribute copies of the software, or if you modify it: responsibilities to respect the freedom of others.
 For example, if you distribute copies of such a program, whether gratis or for a fee, you must pass on to the recipients the same freedoms that you received. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights.
 Developers that use the GNU GPL protect your rights with two steps: (1) assert copyright on the software, and (2) offer you this License giving you legal permission to copy, distribute and/or modify it.
 For the developers' and authors' protection, the GPL clearly explains that there is no warranty for this free software. For both users' and authors' sake, the GPL requires that modified versions be marked as changed, so that their problems will not be attributed erroneously to authors of previous versions.
 Some devices are designed to deny users access to install or run modified versions of the software inside them, although the manufacturer can do so. This is fundamentally incompatible with the aim of protecting users' freedom to change the software. The systematic pattern of such abuse occurs in the area of products for individuals to use, which is precisely where it is most unacceptable. Therefore, we have designed this version of the GPL to prohibit the practice for those products. If such problems arise substantially in other domains, we stand ready to extend this provision to those domains in future versions of the GPL, as needed to protect the freedom of users.
 Finally, every program is threatened constantly by software patents. States should not allow patents to restrict development and use of software on general-purpose computers, but in those that do, we wish to avoid the special danger that patents applied to a free program could make it effectively proprietary. To prevent this, the GPL assures that patents cannot be used to render the program non-free.
 The precise terms and conditions for copying, distribution and modification follow.
 TERMS AND CONDITIONS
 0. Definitions.
 “This License” refers to version 3 of the GNU General Public License.
 “Copyright” also means copyright-like laws that apply to other kinds of works, such as semiconductor masks.
 “The Program” refers to any copyrightable work licensed under this License. Each licensee is addressed as “you”. “Licensees” and “recipients” may be individuals or organizations.
 To “modify” a work means to copy from or adapt all or part of the work in a fashion requiring copyright permission, other than the making of an exact copy. The resulting work is called a “modified version” of the earlier work or a work “based on” the earlier work.
 A “covered work” means either the unmodified Program or a work based on the Program.
 To “propagate” a work means to do anything with it that, without permission, would make you directly or secondarily liable for infringement under applicable copyright law, except executing it on a computer or modifying a private copy. Propagation includes copying, distribution (with or without modification), making available to the public, and in some countries other activities as well.
 To “convey” a work means any kind of propagation that enables other parties to make or receive copies. Mere interaction with a user through a computer network, with no transfer of a copy, is not conveying.
 An interactive user interface displays “Appropriate Legal Notices” to the extent that it includes a convenient and prominently visible feature that (1) displays an appropriate copyright notice, and (2) tells the user that there is no warranty for the work (except to the extent that warranties are provided), that licensees may convey the work under this License, and how to view a copy of this License. If the interface presents a list of user commands or options, such as a menu, a prominent item in the list meets this criterion.
 1. Source Code.
 The “source code” for a work means the preferred form of the work for making modifications to it. “Object code” means any non-source form of a work.
 A “Standard Interface” means an interface that either is an official standard defined by a recognized standards body, or, in the case of interfaces specified for a particular programming language, one that is widely used among developers working in that language.
 The “System Libraries” of an executable work include anything, other than the work as a whole, that (a) is included in the normal form of packaging a Major Component, but which is not part of that Major Component, and (b) serves only to enable use of the work with that Major Component, or to implement a Standard Interface for which an implementation is available to the public in source code form. A “Major Component”, in this context, means a major essential component (kernel, window system, and so on) of the specific operating system (if any) on which the executable work runs, or a compiler used to produce the work, or an object code interpreter used to run it.
 The “Corresponding Source” for a work in object code form means all the source code needed to generate, install, and (for an executable work) run the object code and to modify the work, including scripts to control those activities. However, it does not include the work's System Libraries, or general-purpose tools or generally available free programs which are used unmodified in performing those activities but which are not part of the work. For example, Corresponding Source includes interface definition files associated with source files for the work, and the source code for shared libraries and dynamically linked subprograms that the work is specifically designed to require, such as by intimate data communication or control flow between those subprograms and other parts of the work.
 The Corresponding Source need not include anything that users can regenerate automatically from other parts of the Corresponding Source.
 The Corresponding Source for a work in source code form is that same work.
 2. Basic Permissions.
 All rights granted under this License are granted for the term of copyright on the Program, and are irrevocable provided the stated conditions are met. This License explicitly affirms your unlimited permission to run the unmodified Program. The output from running a covered work is covered by this License only if the output, given its content, constitutes a covered work. This License acknowledges your rights of fair use or other equivalent, as provided by copyright law.
 You may make, run and propagate covered works that you do not convey, without conditions so long as your license otherwise remains in force. You may convey covered works to others for the sole purpose of having them make modifications exclusively for you, or provide you with facilities for running those works, provided that you comply with the terms of this License in conveying all material for which you do not control copyright. Those thus making or running the covered works for you must do so exclusively on your behalf, under your direction and control, on terms that prohibit them from making any copies of your copyrighted material outside their relationship with you.
 Conveying under any other circumstances is permitted solely under the conditions stated below. Sublicensing is not allowed; section 10 makes it unnecessary.
 3. Protecting Users' Legal Rights From Anti-Circumvention Law.
 No covered work shall be deemed part of an effective technological measure under any applicable law fulfilling obligations under article 11 of the WIPO copyright treaty adopted on 20 December 1996, or similar laws prohibiting or restricting circumvention of such measures.
 When you convey a covered work, you waive any legal power to forbid circumvention of technological measures to the extent such circumvention is effected by exercising rights under this License with respect to the covered work, and you disclaim any intention to limit operation or modification of the work as a means of enforcing, against the work's users, your or third parties' legal rights to forbid circumvention of technological measures.
 4. Conveying Verbatim Copies.
 You may convey verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice; keep intact all notices stating that this License and any non-permissive terms added in accord with section 7 apply to the code; keep intact all notices of the absence of any warranty; and give all recipients a copy of this License along with the Program.
 You may charge any price or no price for each copy that you convey, and you may offer support or warranty protection for a fee.
 5. Conveying Modified Source Versions.
 You may convey a work based on the Program, or the modifications to produce it from the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions:
     a) The work must carry prominent notices stating that you modified it, and giving a relevant date.
     b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”.
     c) You must license the entire work, as a whole, under this License to anyone who comes into possession of a copy. This License will therefore apply, along with any applicable section 7 additional terms, to the whole of the work, and all its parts, regardless of how they are packaged. This License gives no permission to license the work in any other way, but it does not invalidate such permission if you have separately received it.
     d) If the work has interactive user interfaces, each must display Appropriate Legal Notices; however, if the Program has interactive interfaces that do not display Appropriate Legal Notices, your work need not make them do so.
 A compilation of a covered work with other separate and independent works, which are not by their nature extensions of the covered work, and which are not combined with it such as to form a larger program, in or on a volume of a storage or distribution medium, is called an “aggregate” if the compilation and its resulting copyright are not used to limit the access or legal rights of the compilation's users beyond what the individual works permit. Inclusion of a covered work in an aggregate does not cause this License to apply to the other parts of the aggregate.
 6. Conveying Non-Source Forms.
 You may convey a covered work in object code form under the terms of sections 4 and 5, provided that you also convey the machine-readable Corresponding Source under the terms of this License, in one of these ways:
     a) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a durable physical medium customarily used for software interchange.
     b) Convey the object code in, or embodied in, a physical product (including a physical distribution medium), accompanied by a written offer, valid for at least three years and valid for as long as you offer spare parts or customer support for that product model, to give anyone who possesses the object code either (1) a copy of the Corresponding Source for all the software in the product that is covered by this License, on a durable physical medium customarily used for software interchange, for a price no more than your reasonable cost of physically performing this conveying of source, or (2) access to copy the Corresponding Source from a network server at no charge.
     c) Convey individual copies of the object code with a copy of the written offer to provide the Corresponding Source. This alternative is allowed only occasionally and noncommercially, and only if you received the object code with such an offer, in accord with subsection 6b.
     d) Convey the object code by offering access from a designated place (gratis or for a charge), and offer equivalent access to the Corresponding Source in the same way through the same place at no further charge. You need not require recipients to copy the Corresponding Source along with the object code. If the place to copy the object code is a network server, the Corresponding Source may be on a different server (operated by you or a third party) that supports equivalent copying facilities, provided you maintain clear directions next to the object code saying where to find the Corresponding Source. Regardless of what server hosts the Corresponding Source, you remain obligated to ensure that it is available for as long as needed to satisfy these requirements.
     e) Convey the object code using peer-to-peer transmission, provided you inform other peers where the object code and Corresponding Source of the work are being offered to the general public at no charge under subsection 6d.
 A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work.
 A “User Product” is either (1) a “consumer product”, which means any tangible personal property which is normally used for personal, family, or household purposes, or (2) anything designed or sold for incorporation into a dwelling. In determining whether a product is a consumer product, doubtful cases shall be resolved in favor of coverage. For a particular product received by a particular user, “normally used” refers to a typical or common use of that class of product, regardless of the status of the particular user or of the way in which the particular user actually uses, or expects or is expected to use, the product. A product is a consumer product regardless of whether the product has substantial commercial, industrial or non-consumer uses, unless such uses represent the only significant mode of use of the product.
 “Installation Information” for a User Product means any methods, procedures, authorization keys, or other information required to install and execute modified versions of a covered work in that User Product from a modified version of its Corresponding Source. The information must suffice to ensure that the continued functioning of the modified object code is in no case prevented or interfered with solely because modification has been made.
 If you convey an object code work under this section in, or with, or specifically for use in, a User Product, and the conveying occurs as part of a transaction in which the right of possession and use of the User Product is transferred to the recipient in perpetuity or for a fixed term (regardless of how the transaction is characterized), the Corresponding Source conveyed under this section must be accompanied by the Installation Information. But this requirement does not apply if neither you nor any third party retains the ability to install modified object code on the User Product (for example, the work has been installed in ROM).
 The requirement to provide Installation Information does not include a requirement to continue to provide support service, warranty, or updates for a work that has been modified or installed by the recipient, or for the User Product in which it has been modified or installed. Access to a network may be denied when the modification itself materially and adversely affects the operation of the network or violates the rules and protocols for communication across the network.
 Corresponding Source conveyed, and Installation Information provided, in accord with this section must be in a format that is publicly documented (and with an implementation available to the public in source code form), and must require no special password or key for unpacking, reading or copying.
 7. Additional Terms.
 “Additional permissions” are terms that supplement the terms of this License by making exceptions from one or more of its conditions. Additional permissions that are applicable to the entire Program shall be treated as though they were included in this License, to the extent that they are valid under applicable law. If additional permissions apply only to part of the Program, that part may be used separately under those permissions, but the entire Program remains governed by this License without regard to the additional permissions.
 When you convey a copy of a covered work, you may at your option remove any additional permissions from that copy, or from any part of it. (Additional permissions may be written to require their own removal in certain cases when you modify the work.) You may place additional permissions on material, added by you to a covered work, for which you have or can give appropriate copyright permission.
 Notwithstanding any other provision of this License, for material you add to a covered work, you may (if authorized by the copyright holders of that material) supplement the terms of this License with terms:
     a) Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or
     b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or
     c) Prohibiting misrepresentation of the origin of that material, or requiring that modified versions of such material be marked in reasonable ways as different from the original version; or
     d) Limiting the use for publicity purposes of names of licensors or authors of the material; or
     e) Declining to grant rights under trademark law for use of some trade names, trademarks, or service marks; or
     f) Requiring indemnification of licensors and authors of that material by anyone who conveys the material (or modified versions of it) with contractual assumptions of liability to the recipient, for any liability that these contractual assumptions directly impose on those licensors and authors.
 All other non-permissive additional terms are considered “further restrictions” within the meaning of section 10. If the Program as you received it, or any part of it, contains a notice stating that it is governed by this License along with a term that is a further restriction, you may remove that term. If a license document contains a further restriction but permits relicensing or conveying under this License, you may add to a covered work material governed by the terms of that license document, provided that the further restriction does not survive such relicensing or conveying.
 If you add terms to a covered work in accord with this section, you must place, in the relevant source files, a statement of the additional terms that apply to those files, or a notice indicating where to find the applicable terms.
 Additional terms, permissive or non-permissive, may be stated in the form of a separately written license, or stated as exceptions; the above requirements apply either way.
 8. Termination.
 You may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to propagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11).
 However, if you cease all violation of this License, then your license from a particular copyright holder is reinstated (a) provisionally, unless and until the copyright holder explicitly and finally terminates your license, and (b) permanently, if the copyright holder fails to notify you of the violation by some reasonable means prior to 60 days after the cessation.
 Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by some reasonable means, this is the first time you have received notice of violation of this License (for any work) from that copyright holder, and you cure the violation prior to 30 days after your receipt of the notice.
 Termination of your rights under this section does not terminate the licenses of parties who have received copies or rights from you under this License. If your rights have been terminated and not permanently reinstated, you do not qualify to receive new licenses for the same material under section 10.
 9. Acceptance Not Required for Having Copies.
 You are not required to accept this License in order to receive or run a copy of the Program. Ancillary propagation of a covered work occurring solely as a consequence of using peer-to-peer transmission to receive a copy likewise does not require acceptance. However, nothing other than this License grants you permission to propagate or modify any covered work. These actions infringe copyright if you do not accept this License. Therefore, by modifying or propagating a covered work, you indicate your acceptance of this License to do so.
 10. Automatic Licensing of Downstream Recipients.
 Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License.
 An “entity transaction” is a transaction transferring control of an organization, or substantially all assets of one, or subdividing an organization, or merging organizations. If propagation of a covered work results from an entity transaction, each party to that transaction who receives a copy of the work also receives whatever licenses to the work the party's predecessor in interest had or could give under the previous paragraph, plus a right to possession of the Corresponding Source of the work from the predecessor in interest, if the predecessor has it or can get it with reasonable efforts.
 You may not impose any further restrictions on the exercise of the rights granted or affirmed under this License. For example, you may not impose a license fee, royalty, or other charge for exercise of rights granted under this License, and you may not initiate litigation (including a cross-claim or counterclaim in a lawsuit) alleging that any patent claim is infringed by making, using, selling, offering for sale, or importing the Program or any portion of it.
 11. Patents.
 A “contributor” is a copyright holder who authorizes use under this License of the Program or a work on which the Program is based. The work thus licensed is called the contributor's “contributor version”.
 A contributor's “essential patent claims” are all patent claims owned or controlled by the contributor, whether already acquired or hereafter acquired, that would be infringed by some manner, permitted by this License, of making, using, or selling its contributor version, but do not include claims that would be infringed only as a consequence of further modification of the contributor version. For purposes of this definition, “control” includes the right to grant patent sublicenses in a manner consistent with the requirements of this License.
 Each contributor grants you a non-exclusive, worldwide, royalty-free patent license under the contributor's essential patent claims, to make, use, sell, offer for sale, import and otherwise run, modify and propagate the contents of its contributor version.
 In the following three paragraphs, a “patent license” is any express agreement or commitment, however denominated, not to enforce a patent (such as an express permission to practice a patent or covenant not to sue for patent infringement). To “grant” such a patent license to a party means to make such an agreement or commitment not to enforce a patent against the party.
 If you convey a covered work, knowingly relying on a patent license, and the Corresponding Source of the work is not available for anyone to copy, free of charge and under the terms of this License, through a publicly available network server or other readily accessible means, then you must either (1) cause the Corresponding Source to be so available, or (2) arrange to deprive yourself of the benefit of the patent license for this particular work, or (3) arrange, in a manner consistent with the requirements of this License, to extend the patent license to downstream recipients. “Knowingly relying” means you have actual knowledge that, but for the patent license, your conveying the covered work in a country, or your recipient's use of the covered work in a country, would infringe one or more identifiable patents in that country that you have reason to believe are valid.
 If, pursuant to or in connection with a single transaction or arrangement, you convey, or propagate by procuring conveyance of, a covered work, and grant a patent license to some of the parties receiving the covered work authorizing them to use, propagate, modify or convey a specific copy of the covered work, then the patent license you grant is automatically extended to all recipients of the covered work and works based on it.
 A patent license is “discriminatory” if it does not include within the scope of its coverage, prohibits the exercise of, or is conditioned on the non-exercise of one or more of the rights that are specifically granted under this License. You may not convey a covered work if you are a party to an arrangement with a third party that is in the business of distributing software, under which you make payment to the third party based on the extent of your activity of conveying the work, and under which the third party grants, to any of the parties who would receive the covered work from you, a discriminatory patent license (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that contain the covered work, unless you entered into that arrangement, or that patent license was granted, prior to 28 March 2007.
 Nothing in this License shall be construed as excluding or limiting any implied license or other defenses to infringement that may otherwise be available to you under applicable patent law.
 12. No Surrender of Others' Freedom.
 If conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot convey a covered work so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not convey it at all. For example, if you agree to terms that obligate you to collect a royalty for further conveying from those to whom you convey the Program, the only way you could satisfy both those terms and this License would be to refrain entirely from conveying the Program.
 13. Use with the GNU Affero General Public License.
 Notwithstanding any other provision of this License, you have permission to link or combine any covered work with a work licensed under version 3 of the GNU Affero General Public License into a single combined work, and to convey the resulting work. The terms of this License will continue to apply to the part which is the covered work, but the special requirements of the GNU Affero General Public License, section 13, concerning interaction through a network will apply to the combination as such.
 14. Revised Versions of this License.
 The Free Software Foundation may publish revised and/or new versions of the GNU General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns.
 Each version is given a distinguishing version number. If the Program specifies that a certain numbered version of the GNU General Public License “or any later version” applies to it, you have the option of following the terms and conditions either of that numbered version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of the GNU General Public License, you may choose any version ever published by the Free Software Foundation.
 If the Program specifies that a proxy can decide which future versions of the GNU General Public License can be used, that proxy's public statement of acceptance of a version permanently authorizes you to choose that version for the Program.
 Later license versions may give you additional or different permissions. However, no additional obligations are imposed on any author or copyright holder as a result of your choosing to follow a later version.
 15. Disclaimer of Warranty.
 THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
 16. Limitation of Liability.
 IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
 17. Interpretation of Sections 15 and 16.
 If the disclaimer of warranty and limitation of liability provided above cannot be given local legal effect according to their terms, reviewing courts shall apply local law that most closely approximates an absolute waiver of all civil liability in connection with the Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee.
 END OF TERMS AND CONDITIONS
 How to Apply These Terms to Your New Programs
 If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms.
 To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively state the exclusion of warranty; and each file should have at least the “copyright” line and a pointer to where the full notice is found.
     <one line to give the program's name and a brief idea of what it does.>
     Copyright (C) <year>  <name of author>
     This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.
     This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more details.
     You should have received a copy of the GNU General Public License along with this program.  If not, see <https://www.gnu.org/licenses/>.
 Also add information on how to contact you by electronic and paper mail.
 If the program does terminal interaction, make it output a short notice like this when it starts in an interactive mode:
     <program>  Copyright (C) <year>  <name of author>
     This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
     This is free software, and you are welcome to redistribute it under certain conditions; type `show c' for details.
 The hypothetical commands `show w' and `show c' should show the appropriate parts of the General Public License. Of course, your program's commands might be different; for a GUI interface, you would use an “about box”.
 You should also get your employer (if you work as a programmer) or school, if any, to sign a “copyright disclaimer” for the program, if necessary. For more information on this, and how to apply and follow the GNU GPL, see <https://www.gnu.org/licenses/>.
 The GNU General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Lesser General Public License instead of this License. But first, please read <https://www.gnu.org/philosophy/why-not-lgpl.html>.
--- a/LICENSES/LicenseRef-Reserved.txt
+++ b/LICENSES/LicenseRef-Reserved.txt
@ -0,0 +1 @@
 All rights reserved.
--- a/REUSE.toml
+++ b/REUSE.toml
@ -29,6 +29,12 @@ SPDX-License-Identifier = "EUPL-1.2"
 path = ["patches/nixpkgs/06-netbox-qrcode.patch"]
 precedence = "closest"
 [[annotations]]
 SPDX-FileCopyrightText = "2024 Lubin Bailly <lubin.bailly@dgnum.eu>"
 SPDX-License-Identifier = "EUPL-1.2"
 path = ["modules/nixos/extranix/0001-revert-don-t-parse-md-in-js.patch", "modules/nixos/extranix/0002-chore-remove-useless-dependencies.patch", "modules/nixos/extranix/0003-feat-separate-HTML-description-of-MD-description.patch", "modules/nixos/extranix/0004-fix-indentation-of-ul.patch", "modules/nixos/extranix/0005-feat-match-all-substring-by-default.patch"]
 precedence = "closest"
 [[annotations]]
 SPDX-FileCopyrightText = "La Délégation Générale Numérique <contact@dgnum.eu>"
 SPDX-License-Identifier = "MIT"
@ -40,3 +46,15 @@ SPDX-FileCopyrightText = "The [npins](https://github.com/andir/npins) contributo
 SPDX-License-Identifier = "EUPL-1.2"
 path = "**/npins/*"
 precedence = "closest"
 [[annotations]]
 SPDX-FileCopyrightText = "The [forgejo](https://codeberg.org/forgejo/forgejo) contributors"
 SPDX-License-Identifier = "GPL-3.0-or-later"
 path = "machines/nixos/compute01/extranix/static-data/images/forgejo.png"
 precedence = "closest"
 [[annotations]]
 SPDX-FileCopyrightText = "La Délégation Générale Numérique <contact@dgnum.eu>"
 SPDX-License-Identifier = "LicenseRef-Reserved"
 path = ["machines/nixos/compute01/extranix/static-data/images/dgnum.png", "machines/nixos/compute01/extranix/static-data/images/favicon.ico", "machines/nixos/compute01/extranix/static-data/images/favicon.png"]
 precedence = "closest"
--- a/default.nix
+++ b/default.nix
@ -18,6 +18,7 @@ let
    ;
  nix-reuse = import sources.nix-reuse { inherit pkgs; };
  nix-actions = import sources.nix-actions { inherit pkgs; };
  git-checks = (import sources.git-hooks).run {
    src = ./.;
@ -101,6 +102,16 @@ let
        path = [ "patches/nixpkgs/06-netbox-qrcode.patch" ];
        copyright = "2024 Maurice Debray <maurice.debray@dgnum.eu>";
      }
      {
        path = [
          "modules/nixos/extranix/0001-revert-don-t-parse-md-in-js.patch"
          "modules/nixos/extranix/0002-chore-remove-useless-dependencies.patch"
          "modules/nixos/extranix/0003-feat-separate-HTML-description-of-MD-description.patch"
          "modules/nixos/extranix/0004-fix-indentation-of-ul.patch"
          "modules/nixos/extranix/0005-feat-match-all-substring-by-default.patch"
        ];
        copyright = "2024 Lubin Bailly <lubin.bailly@dgnum.eu>";
      }
      # colmena wrapper
      {
@ -114,10 +125,25 @@ let
        license = "EUPL-1.2";
        copyright = "The [npins](https://github.com/andir/npins) contributors";
      }
      # images
      {
        path = "machines/nixos/compute01/extranix/static-data/images/forgejo.png";
        license = "GPL-3.0-or-later";
        copyright = "The [forgejo](https://codeberg.org/forgejo/forgejo) contributors";
      }
      {
        path = [
          "machines/nixos/compute01/extranix/static-data/images/dgnum.png"
          "machines/nixos/compute01/extranix/static-data/images/favicon.ico"
          "machines/nixos/compute01/extranix/static-data/images/favicon.png"
        ];
        license = "LicenseRef-Reserved";
      }
    ];
  };
-  workflows = (import sources.nix-actions { inherit pkgs; }).install {
+  workflows = nix-actions.install {
    src = ./.;
    workflows = mapAttrs' (
@ -125,8 +151,12 @@ let
      nameValuePair (removeSuffix ".nix" name) (
        let
          w = import ./workflows/${name};
          args = {
            inherit nix-actions;
            inherit (pkgs) lib;
          };
        in
-        if isFunction w then w { inherit (pkgs) lib; } else w
+        if (isFunction w) then (w args) else w
      )
    ) (builtins.readDir ./workflows);
  };
@ -165,11 +195,11 @@ in
      (pkgs.callPackage "${sources.lon}/nix/packages/lon.nix" { })
    ] ++ git-checks.enabledPackages ++ (builtins.attrValues scripts);
-    shellHook = ''
+    shellHook = builtins.concatStringsSep "\n" [
-      ${git-checks.shellHook}
+      git-checks.shellHook
-      ${workflows.shellHook}
+      reuse.shellHook
-      ${reuse.shellHook}
+      workflows.shellHook
-    '';
+    ];
    preferLocalBuild = true;
@ -180,6 +210,7 @@ in
      pre-commit.shellHook = git-checks.shellHook;
      check-workflows.shellHook = workflows.shellHook;
      eval-nodes.packages = [ scripts.cache-node ];
      eval-shell.packages = [ scripts.nix-build-and-cache ];
    };
  };
 }
--- a/keys/default.nix
+++ b/keys/default.nix
@ -5,7 +5,9 @@
 let
  _sources = import ../npins;
-  meta = import ../meta (import _sources.nixpkgs { }).lib;
+  inherit (import _sources.nixpkgs { }) lib;
  meta = import ../meta lib;
  getAttr = flip builtins.getAttr;
@ -32,6 +34,7 @@ rec {
    ];
    rescue01 = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIEJa02Annu8o7ggPjTH/9ttotdNGyghlWfU9E8pnuLUf" ];
    storage01 = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIA0s+rPcEcfWCqZ4B2oJiWT/60awOI8ijL1rtDM2glXZ" ];
    tower01 = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAICVpR+TMRLGAfhn7Q0C3tKOydYYjfoC/e1ZYbKpby01Z" ];
    vault01 = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIAJA6VA7LENvTRlKdcrqt8DxDOPvX3bg3Gjy9mNkdFEW" ];
    web01 = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIPR+lewuJ/zhCyizJGJOH1UaAB699ItNKEaeuoK57LY5" ];
    web02 = [ "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAID+QDE+GgZs6zONHvzRW15BzGJNW69k2BFZgB/Zh/tLX" ];
@ -98,4 +101,8 @@ rec {
  # List of 'machine' keys
  machineKeys = rootKeys ++ (getKeys (builtins.attrNames meta.nodes));
  nixosMachineKeys =
    rootKeys
    ++ (getKeys (builtins.attrNames (lib.filterAttrs (_: v: v.nixpkgs.system == "nixos") meta.nodes)));
 }
--- a/lib/netconf-junos/default.nix
+++ b/lib/netconf-junos/default.nix
@ -14,10 +14,10 @@ let
  inherit (lib) mapAttrs mkOption;
  inherit (lib.types)
    attrs
    attrsOf
    bool
    str
    any
    submodule
    package
    ;
@ -44,8 +44,9 @@ in
  options = {
    # Hack because of this https://git.dgnum.eu/DGNum/colmena/src/commit/71b1b660f2cda2e34e134d0028cafbd56bb22008/src/nix/hive/eval.nix#L166 which defines nixpkgs option but we don't have it here. What about liminix ?
    nixpkgs = mkOption {
-      type = attrsOf any;
+      type = attrs;
      default = { };
      visible = false;
    };
    netconf = {
      xmls.configuration = mkOption {
@ -77,6 +78,9 @@ in
      rpc = mkOption {
        type = package;
        readOnly = true;
        description = ''
          The final rpc xml to send via netconf.
        '';
      };
    };
  };
--- a/machines/nixos/compute01/_configuration.nix
+++ b/machines/nixos/compute01/_configuration.nix
@ -19,6 +19,7 @@ lib.extra.mkConfig {
    "arkheon"
    "dgsi"
    "ds-fr"
    "extranix"
    "grafana"
    "hedgedoc"
    "kanidm"
--- a/machines/nixos/compute01/extranix/default.nix
+++ b/machines/nixos/compute01/extranix/default.nix
@ -0,0 +1,113 @@
 # SPDX-FileCopyrightText: 2024 Lubin Bailly <lubin.bailly@dgnum.eu>
 #
 # SPDX-License-Identifier: EUPL-1.2
 {
  lib,
  sources,
  ...
 }:
 let
  inherit (lib.extra) mkImports;
  hive-root = ../../../..;
  host = "search.infra.dgnum.eu";
 in
 {
  services = {
    nginx.virtualHosts.${host} = {
      enableACME = true;
      forceSSL = true;
    };
    extranix = {
      enable = true;
      modules = {
        "netconf" = {
          paths = mkImports hive-root [
            "modules/netconf"
            "modules/generic"
            "lib/netconf-junos"
          ];
          path-translations = [
            {
              base = hive-root;
              url = "https://git.dgnum.eu/DGNum/infrastructure/src/branch/main/";
            }
          ];
        };
        "DGNum Infrastructure" =
          let
            # prefer a non-patched nixpkgs
            infra-nixpkgs = (import "${hive-root}/hive.nix").meta.nixpkgs { };
            infra-modulesPath = "${infra-nixpkgs.path}/nixos/modules/";
          in
          {
            paths = mkImports hive-root [
              "modules/generic"
              "modules/nixos"
            ];
            ignored-modules = import "${infra-modulesPath}/module-list.nix" ++ [
              "${sources.agenix}/modules/age.nix"
              "${sources.arkheon}/module.nix"
              "${sources."microvm.nix"}/nixos-modules/host"
              "${sources.cgroup-exporter}/nix/module.nix"
              { system.stateVersion = "25.05"; }
            ];
            specialArgs = {
              inherit
                sources
                lib
                ;
              modulesPath = infra-modulesPath;
              pkgs = infra-nixpkgs;
              name = "<nodeName>";
              nodeMeta = {
                nix-modules = [ ];
                admins = [ ];
                adminGroups = [ ];
              };
              meta = {
                organization.groups.root = [ ];
              };
            };
            path-translations = [
              {
                base = hive-root;
                url = "https://git.dgnum.eu/DGNum/infrastructure/src/branch/main/";
              }
              {
                base = sources.nix-modules;
                url = "https://git.hubrecht.ovh/hubrecht/nix-modules/src/branch/main/";
              }
              {
                base = infra-modulesPath;
                url = "https://github.com/NixOS/nixpkgs/tree/master/nixos/modules";
              }
            ];
          };
      };
      static-data = ./static-data;
      inherit host;
      settings = {
        baseUrl = "https://dgnum.eu/";
        title = "DGNum module documentation";
        languageCode = "en-us";
        params = {
          release_current_stable = "DGNum-Infrastructure";
          logo = "images/dgnum.png";
          footer_credits_line = ''
            Based on <a href="https://github.com/mipmip/home-manager-option-search">Home Manager Option Search</a>
          '';
          footer_copyright_line = ''
            Made by catvayor for the <a href="https://dgnum.eu">DGNum</a>.
          '';
          main_menu = [
            {
              name = ''<img src="images/forgejo.png" style="display:inline-block; height:2.5em; transform:translate(0, -0.7em)" /> Source'';
              url = "https://git.dgnum.eu/DGNum/infrastructure/";
            }
          ];
        };
      };
    };
  };
 }
--- a/machines/nixos/compute01/extranix/static-data/images/dgnum.png
+++ b/machines/nixos/compute01/extranix/static-data/images/dgnum.png
--- a/machines/nixos/compute01/extranix/static-data/images/favicon.ico
+++ b/machines/nixos/compute01/extranix/static-data/images/favicon.ico
--- a/machines/nixos/compute01/extranix/static-data/images/favicon.png
+++ b/machines/nixos/compute01/extranix/static-data/images/favicon.png
--- a/machines/nixos/compute01/extranix/static-data/images/forgejo.png
+++ b/machines/nixos/compute01/extranix/static-data/images/forgejo.png
--- a/machines/nixos/storage01/garage.nix
+++ b/machines/nixos/storage01/garage.nix
@ -62,7 +62,9 @@ in
      db_engine = "lmdb";
-      replication_mode = "none"; # TODO: deprecated
+      consistency_mode = "consistent";
      replication_factor = 1;
      compression_level = 7;
      rpc_bind_addr = "[::]:${toString ports.rpc}";
--- a/machines/nixos/tower01/_configuration.nix
+++ b/machines/nixos/tower01/_configuration.nix
@ -0,0 +1,17 @@
 # SPDX-FileCopyrightText: 2024 Elias Coppens <elias@dgnum.eu>
 #
 # SPDX-License-Identifier: EUPL-1.2
 { lib, ... }:
 lib.extra.mkConfig {
  enabledModules = [ ];
  enabledServices = [ ];
  extraConfig = {
    services.netbird.enable = true;
  };
  root = ./.;
 }
--- a/machines/nixos/tower01/_hardware-configuration.nix
+++ b/machines/nixos/tower01/_hardware-configuration.nix
@ -0,0 +1,120 @@
 # Do not modify this file!  It was generated by ‘nixos-generate-config’
 # and may be overwritten by future invocations.  Please make changes
 # to /etc/nixos/configuration.nix instead.
 {
  config,
  lib,
  modulesPath,
  ...
 }:
 {
  imports = [
    (modulesPath + "/installer/scan/not-detected.nix")
  ];
  boot = {
    initrd = {
      availableKernelModules = [
        "ehci_pci"
        "ahci"
        "mpt3sas"
        "usbhid"
        "usb_storage"
        "sd_mod"
      ];
      kernelModules = [ ];
      luks.devices = {
        rootfs01 = {
          device = "/dev/disk/by-label/rootfs01";
          keyFile = "/dev/zero";
          keyFileSize = 1;
        };
        rootfs02 = {
          device = "/dev/disk/by-label/rootfs02";
          keyFile = "/dev/zero";
          keyFileSize = 1;
        };
        slow0101 = {
          device = "/dev/disk/by-label/slow0101";
          keyFile = "/dev/zero";
          keyFileSize = 1;
        };
        slow0102 = {
          device = "/dev/disk/by-label/slow0102";
          keyFile = "/dev/zero";
          keyFileSize = 1;
        };
        slow0201 = {
          device = "/dev/disk/by-label/slow0201";
          keyFile = "/dev/zero";
          keyFileSize = 1;
        };
        slow0202 = {
          device = "/dev/disk/by-label/slow0202";
          keyFile = "/dev/zero";
          keyFileSize = 1;
        };
        slow0301 = {
          device = "/dev/disk/by-label/slow0301";
          keyFile = "/dev/zero";
          keyFileSize = 1;
        };
        slow0302 = {
          device = "/dev/disk/by-label/slow0302";
          keyFile = "/dev/zero";
          keyFileSize = 1;
        };
      };
    };
    kernelModules = [ "kvm-intel" ];
    extraModulePackages = [ ];
  };
  fileSystems = {
    "/" = {
      device = "rootfs";
      fsType = "zfs";
    };
    # boot1 = boot partition (primary)
    # boot2 = boot partition (backup)
    "/boot1" = {
      device = "/dev/disk/by-uuid/1965-5D59";
      fsType = "vfat";
      options = [
        "fmask=0022"
        "dmask=0022"
      ];
    };
    "/boot2" = {
      device = "/dev/disk/by-uuid/19C4-49E1";
      fsType = "vfat";
      options = [
        "fmask=0022"
        "dmask=0022"
      ];
    };
    "/nix" = {
      device = "rootfs/nix";
      fsType = "zfs";
    };
    "/var" = {
      device = "rootfs/var";
      fsType = "zfs";
    };
  };
  swapDevices = [
    { device = "/dev/disk/by-uuid/7614fa12-c6a7-456e-9620-eb9c0e025140"; }
    { device = "/dev/disk/by-uuid/eb0aef44-b264-4f94-b847-3ad5dcc19ffd"; }
  ];
  hardware.cpu.intel.updateMicrocode = lib.mkDefault config.hardware.enableRedistributableFirmware;
 }
--- a/machines/nixos/tower01/secrets/secrets.nix
+++ b/machines/nixos/tower01/secrets/secrets.nix
@ -0,0 +1,7 @@
 # SPDX-FileCopyrightText: 2024 La Délégation Générale Numérique <context@dgnum.eu>
 #
 # SPDX-License-Identifer: EUPL-1.2
 (import ../../../../keys).mkSecrets [ "tower01" ] [
 ]
--- a/machines/nixos/vault01/networking.nix
+++ b/machines/nixos/vault01/networking.nix
@ -58,7 +58,10 @@ let
            LinkLocalAddressing = "no";
            DHCPServer = "yes";
          };
-          linkConfig.Promiscuous = true;
+          linkConfig = {
            Promiscuous = true;
            MTUBytes = 1500;
          };
          addresses = [
            {
              Address = "${servIP}/27";
@ -134,7 +137,10 @@ let
      Id = 2001;
      address = [ "10.0.254.1/24" ];
-      extraNetwork.networkConfig.DHCPServer = "yes";
+      extraNetwork = {
        networkConfig.DHCPServer = "yes";
        linkConfig.MTUBytes = 1500;
      };
    };
  } // builtins.listToAttrs (map mkUserVlan userVlans);
 in
@ -176,6 +182,7 @@ in
            IPv6AcceptRA = false;
            IPv6SendRA = false;
          };
          linkConfig.MTUBytes = 1504;
        };
        "50-gretap1" = {
          name = "gretap1";
--- a/machines/nixos/web02/cas-eleves/default.nix
+++ b/machines/nixos/web02/cas-eleves/default.nix
@ -14,6 +14,9 @@ let
  inherit (lib) mapAttrsToList;
  host = "cas.eleves.ens.fr";
  src = sources.cas-eleves;
  port = 9889;
  python3 =
@ -49,7 +52,7 @@ let
  staticDrv = pkgs.stdenv.mkDerivation {
    name = "cas_eleves-static";
-    src = sources.cas-eleves;
+    inherit src;
    nativeBuildInputs = [ pythonEnv ];
@ -85,13 +88,12 @@ in
        };
        StateDirectory = "django-cas-eleves";
        User = "cas_server";
-        WorkingDirectory = sources.cas-eleves;
+        WorkingDirectory = src;
      };
      environment = {
        CE_ALLOWED_HOSTS = builtins.toJSON [
-          "cas-eleves.dgnum.eu"
+          host
          "cas.eleves.ens.fr"
        ];
        CE_STATIC_ROOT = staticDrv;
      };
@ -99,8 +101,8 @@ in
      path = [ pythonEnv ];
      script = ''
        python3 manage.py loaddata patterns
        python3 manage.py migrate
        python3 manage.py loaddata patterns
        gunicorn app.wsgi --pythonpath ${sources.cas-eleves} -b 127.0.0.1:${builtins.toString port} --workers=2 --threads=4
      '';
    };
@ -118,7 +120,7 @@ in
        };
        StateDirectory = "django-cas-eleves";
        User = "cas_server";
-        WorkingDirectory = sources.cas-eleves;
+        WorkingDirectory = src;
      };
      path = [ pythonEnv ];
--- a/machines/nixos/web03/_configuration.nix
+++ b/machines/nixos/web03/_configuration.nix
@ -13,6 +13,7 @@ lib.extra.mkConfig {
  enabledServices = [
    # List of services to enable
    "django-apps"
    "redirections"
  ];
  extraConfig = {
--- a/machines/nixos/web03/django-apps/ernestophone.nix
+++ b/machines/nixos/web03/django-apps/ernestophone.nix
@ -17,7 +17,7 @@ in
  services.django-apps.sites.ernestophone = {
    source = "https://git.dgnum.eu/DGNum/ernestophone.ens.fr";
    branch = "update";
-    domain = "beta.ernestophone.fr";
+    domain = "ernestophone.ens.fr";
    nginx = {
      enableACME = true;
@ -59,7 +59,7 @@ in
    environment = {
      DJANGO_SETTINGS_MODULE = "Ernestophone.settings";
-      ERNESTOPHONE_ALLOWED_HOSTS = [ "beta.ernestophone.fr" ];
+      ERNESTOPHONE_ALLOWED_HOSTS = [ "ernestophone.ens.fr" ];
    };
  };
 }
--- a/machines/nixos/web03/redirections.nix
+++ b/machines/nixos/web03/redirections.nix
@ -0,0 +1,11 @@
 # SPDX-FileCopyrightText: 2024 Maurice Debray <maurice.debray@dgnum.eu>
 #
 # SPDX-License-Identifier: EUPL-1.2
 {
  dgn-redirections = {
    permanent = {
      "www.ernestophone.ens.fr" = "ernestophone.ens.fr";
    };
  };
 }
--- a/machines/nixos/web03/secrets/bupstash-put_key
+++ b/machines/nixos/web03/secrets/bupstash-put_key
--- a/machines/nixos/web03/secrets/secrets.nix
+++ b/machines/nixos/web03/secrets/secrets.nix
@ -4,6 +4,7 @@
 (import ../../../../keys).mkSecrets [ "web03" ] [
  # List of secrets for web03
  "bupstash-put_key"
  "dj_annuaire-secret_key_file"
  "dj_bocal-secret_key_file"
  "dj_ernestophone-secret_key_file"
--- a/meta/dns.nix
+++ b/meta/dns.nix
@ -75,6 +75,7 @@ let
          "pass" # Vaultwarden
          "pdf" # Stirling PDF
          "saml-idp" # Satosa
          "search.infra" # Extranix
          "social" # Mastodon
          "sso" # Kanidm
          "support" # Zammad support
--- a/meta/network.nix
+++ b/meta/network.nix
@ -189,6 +189,29 @@
    netbirdIp = "100.80.156.154";
  };
  tower01 = {
    interfaces = {
      eno2 = {
        ipv4 = [
          {
            address = "129.199.210.119";
            prefixLength = 24;
          }
        ];
        gateways = [ "129.199.210.254" ];
        dns = [
          "129.199.96.11"
          "129.199.72.99"
        ];
      };
    };
    hostId = "7874d06e";
    netbirdIp = "100.80.185.124";
  };
  vault01 = {
    interfaces = {
      vlan-uplink-cri = {
--- a/meta/nodes/nixos.nix
+++ b/meta/nodes/nixos.nix
@ -182,6 +182,21 @@
    ];
  };
  tower01 = {
    site = "oik01";
    hashedPassword = "$y$j9T$axihKDa.CrYcyoamJWxBq1$bl4TfropTrwLqMy6XK0DKkWRyx9b74kyI/ukE8X5iiD";
    stateVersion = "24.11";
    nixpkgs = {
      version = "24.11";
      system = "nixos";
    };
    admins = [ "ecoppens" ];
  };
  vault01 = {
    site = "hyp01";
    deployment.targetHost = "vault01.hyp01.infra.dgnum.eu";
--- a/modules/nixos/default.nix
+++ b/modules/nixos/default.nix
@ -32,6 +32,7 @@
      "dgn-vm-variant"
      "dgn-web"
      "django-apps"
      "extranix"
    ])
    ++ [
      "${sources.agenix}/modules/age.nix"
--- a/modules/nixos/dgn-backups/default.nix
+++ b/modules/nixos/dgn-backups/default.nix
@ -11,7 +11,12 @@
 }:
 let
-  inherit (lib) mkEnableOption mkOption remove;
+  inherit (lib)
    getExe'
    mkEnableOption
    mkOption
    remove
    ;
  inherit (lib.types)
    attrs
@ -34,6 +39,7 @@ let
    compute01 = "*-*-* *:38:00";
    storage01 = "*-*-* *:21:00";
    web01 = "*-*-* *:47:00";
    web03 = "*-*-* *:13:00";
  };
  mkJobs = builtins.mapAttrs (
@ -93,7 +99,7 @@ in
      "${db}-db".settings = {
        user = "postgres";
        command = [
-          "${lib.getExe' config.services.postgresql.package "pg_dump"}"
+          (getExe' config.services.postgresql.package "pg_dump")
          db
        ];
      };
@ -113,6 +119,8 @@ in
              "storage01"
              "vault01"
              "web01"
              "web02"
              "web03"
            ];
            allowed = [ "put" ];
          }
--- a/modules/nixos/dgn-backups/keys/secrets.nix
+++ b/modules/nixos/dgn-backups/keys/secrets.nix
@ -6,4 +6,5 @@
  "compute01.key"
  "storage01.key"
  "web01.key"
  "web03.key"
 ]
--- a/modules/nixos/dgn-backups/keys/web03.key
+++ b/modules/nixos/dgn-backups/keys/web03.key
@ -0,0 +1,28 @@
 age-encryption.org/v1
 -> ssh-ed25519 jIXfPA CuALmA0MhxnWOn91YhtxAyn1h3xkoiuRoo4Ew1Eu32Q
 TRZxY9rF3NM9ulaA6s6SUetVcLT0He9yGaDZ38T9F6A
 -> ssh-ed25519 QlRB9Q TNA65R5tFs+KXJklNgfPPF12W52Fk6w7epstVzk9Ojw
 SD3IW1+ngBUkbBJz+53zDFVhne6b5rfVi2ym0UjTwLM
 -> ssh-ed25519 r+nK/Q b67auhVkYiVwthLGP3z719Ql/kHZQbxuJJgL7NzZiVc
 kl0ML0yd+QqBm9VZwMcMrZ8uuQkbJySaa9kI4RQFOak
 -> ssh-rsa krWCLQ
 NfHVOPshS0CR3ATrPcYAAiX/kAbgqw6mEVhxdTnvbWa8cPpblUpO/gm4UqW2vP0Q
 XUfvOCgH6ur3joLf/NylqwZ0UkQhmNj2hu8cOtjC4KgTohkMkZZmHlFKM9e3PuSS
 ZMx0GraugdTUD/ViCplwVxFPBUUblLcAuYx/BcV1hTb0ctbN9afi8DVzuSxoalDj
 Jy1UakJU0OwguB+ctv9kZcyLyV7zjchiq+dAoIDvkw0Z9bTCz7xhQ6uXAE7ahp3H
 rvycD/ZkK7h6yhg78x2lIBHP3sPaY3DFMFW9bDLtHYox22RVcm6/7oPbv0hTQ8ob
 n4Q7MWPF4vL1Xz9zyksetQ
 -> ssh-ed25519 /vwQcQ YvQmf/qYc6DVQT0gFPGuakvgDg/A76tor3f0+nTjbH4
 lMQoOb/kimcsSmNnUsUW7XmVdhLMee/s4NACiKi0Xls
 -> ssh-ed25519 0R97PA LzA+wuKlE3cEOpvGEW29/rx3qCU1X32F8HwJNic2Glg
 VOBmCcrtGrUk3ERWJL4QszdDtJrfoI/f1xA+X+a+PQk
 -> ssh-ed25519 JGx7Ng MIxNmk0eTtCUMHiWzklS2zNWdf16EHeOtere8cRoNSk
 X+gf1Ts9n2U+h6a0herR+WuiRXFS5BhicGKxpHQtQzM
 -> ssh-ed25519 bUjjig uSweFovyFxnz7Pqc/MCEE5/ZKgEblqs8xb1Ni+qrhS0
 AUhBDt7YN4x6k34g7mERYbn7rPVPZMmVvmZD668blRs
 -> m-grease \ %<B.PbZ ^G= >nhHA<}
 KhUslr0J28p4r62y0bCKOg2jGOx6M7deQ9Y8gfQ9oi7WYiEygoMghWdUP0lnzh3i
 a+rpJNPtRCIFScDWMazSvnmN6y5Y7W3dmOgLH8aN
 --- +/Cw6vq7b3Kn4D3/ogaSPxfxHBF0YxLXTxiskuD0vHg
 ðÎN½UÉÏôbÈ!D~Ò<>¬‰æ¿AàµŸ¥1¯,ÙÍòe;y)N$Ô–NøO]9C_l{ œÎ„'Ù-÷q³‹<È°¢:¯ÊMÕ¯Á%ïqŒ¸Œ™í®“‰"Ûªð¦˜A®ÜMhè,iì<69>¦<EFBFBD>S9šÜyp&r	/ŒÜÃ‚lÙîÂ!.oƒ…ô¥èAº‰µ{#ƒt<08>ú¶–é4eA-ÆFšßÔ9+ˆ—"¿e¥7»pÏüN”¢BÚ×Ë¶¾Úþ•OÝŸæOIÊ
kDèŒæ‹ˆZ=Pq—ðšQ üGB’²OÅj×ÒhHû+¡ëX<C3AB>¿‰LÎ¬¶ÎP™ 4ÿÐX$¢Áy©÷ßÀxoÞáÄÍ	<09>Æ–Üˆ]Ã¢»_‚µ³
\¼M<C2BC>7m.ByŽºlCr†-ŽHM¤“ãuªùu…+X}¦oÛgg.ÌŠG/$¯LXözÁBâ…¾¿¹sÔá©DÉÈK„Ç>þeü~2‡+WÂ–ÿ‚©¹ƒÏq<C38F>Ï¢òPßSÕîRÆIñD  {"jD¡‹ƒÉŸ9 åÈ<C3A5>¥= ¬SüÒ=<3D>®—HtHÕêbs¬Ÿµ£+èTÑãà0OŒ :¬£}˜mÓp«©ž¶
 z¥DÄ‹ƒÇ§±÷žmSå™8èïa±ípë2ÝÞ”° d°ÈÍÕSùròz½²í	v#ÇÎœsñíÎÕ‰
0æMù¿ÂÎfÚA%Ó
™Ö³ïçD…ë‰†P<E280A0>drŠ£ÌX’IW±HôG©¾\IÑ8_ª„Lœ8Š	Ù1MÚÚíôµMêz)ö$ì{ªM{S|b=ÙÃªÏkô*ïO”{Úêz•ª2:6}#–>_¨Ë-$ÇªÈÑV‰ãp¨²("Wé«U[>>¤žÌ0Qh°-‰ê]¤§ªÞ†r;d&T¡£vÝ-i†Å]šû$ó°$<24>½aè™E94žéé`žçÐ<>í=!p©Æ[£ºqÖÏ›¦?U•/ÏkÀ… ÍwÓ^¥ZµÚIJèG¬lœiÇâè‘…€ö4C÷áb…ÑF÷´ªà+!Ót<C393>\¶t1ôc¡¯îSÇ~ž€+Òwª‘Ñ·[5¡jùû
g6†&©¯o¼´˜±ôÃ
--- a/modules/nixos/dgn-firewall/default.nix
+++ b/modules/nixos/dgn-firewall/default.nix
@ -3,9 +3,9 @@
 # SPDX-License-Identifier: EUPL-1.2
 {
-  pkgs,
+  config,
  lib,
-  name,
+  pkgs,
  ...
 }:
@ -13,6 +13,7 @@ let
  inherit (lib)
    concatStringsSep
    length
    optionalAttrs
    replicate
    splitString
    ;
@ -85,7 +86,9 @@ in
      stop = [ (nft "delete table inet reaction") ];
-      streams = streams'.default // (streams'.${name} or { });
+      streams = {
        inherit (streams') ssh;
      } // (optionalAttrs config.services.nginx.enable { inherit (streams') ai-crawlers; });
    };
  };
 }
--- a/modules/nixos/dgn-firewall/streams.nix
+++ b/modules/nixos/dgn-firewall/streams.nix
@ -23,28 +23,61 @@ let
      cmd = act "delete";
    };
  };
 in
-  available = {
+{
-    ssh = {
+  ai-crawlers = {
-      cmd = journalctl "sshd";
+    cmd = [
      "tail"
      "-n0"
      "-f"
      "/var/log/nginx/access.log"
    ];
-      filters = {
+    filters.bots = {
-        failedlogin = {
+      regex = builtins.map (name: ''^<ip>.*"[^"]*${name}[^"]*"$'') [
-          regex = [
+        "AI2Bot"
-            "authentication failure;.*rhost=<ip>"
+        "Amazonbot"
-            "Connection reset by authenticating user .* <ip>"
+        "Applebot"
-            "Connection closed by invalid user .* <ip> port .*"
+        "Applebot-Extended"
-            "Failed password for .* from <ip>"
+        "Bytespider"
-            "Invalid user .* from <ip> port .*"
+        "CCBot"
-            "Unable to negotiate with <ip> port .*"
+        "ChatGPT-User"
-          ];
+        "ClaudeBot"
-          actions = ban "48h";
+        "Diffbot"
-        };
+        "DuckAssistBot"
        "FacebookBot"
        "GPTBot"
        "Google-Extended"
        "Kangaroo Bot"
        "Meta-ExternalAgent"
        "Meta-ExternalFetcher"
        "OAI-SearchBot"
        "PerplexityBot"
        "Timpibot"
        "Webzio-Extended"
        "YouBot"
        "omgili"
      ];
      actions = ban "720h";
    };
  };
  ssh = {
    cmd = journalctl "sshd";
    filters = {
      failedlogin = {
        regex = [
          "authentication failure;.*rhost=<ip>"
          "Connection reset by authenticating user .* <ip>"
          "Connection closed by invalid user .* <ip> port .*"
          "Failed password for .* from <ip>"
          "Invalid user .* from <ip> port .*"
          "Unable to negotiate with <ip> port .*"
        ];
        actions = ban "48h";
      };
    };
  };
 in
 builtins.mapAttrs (_: builtins.foldl' (a: s: a // { ${s} = available.${s}; }) { }) {
  default = [ "ssh" ];
 }
--- a/modules/nixos/dgn-netbox-agent/secrets/netbox-agent
+++ b/modules/nixos/dgn-netbox-agent/secrets/netbox-agent
@ -1,53 +1,55 @@
 age-encryption.org/v1
-> ssh-ed25519 jIXfPA zyp8jIQ/BGlaOe2hCYdO2/jpiCJO/yASFn2v4yxF3XE
+-> ssh-ed25519 jIXfPA AoV8xDKiLKK+BAtfkB+pNkHZLDIEGw7JyNTTtvayBwA
-tnajUOFI/LeiRRK2+XEmgAhU8PfyerYDPZ3CASAx6uE
+HfIw7XZFDOYSjBVtP103shjsP/1ObTxJr6Aa4CiaTLU
-> ssh-ed25519 QlRB9Q GTRAu+AUZ2MJs3ZaZR8GcS8U2xyGR0mx1FB78TmVhik
+-> ssh-ed25519 QlRB9Q Ctz/5A3UkDcAZ4nukgqE5oiUOa7taQAE1HSanyAEJh0
-PmenwNgQQUd6JWgUU1zmJWF+Lek4QwCKc0MzD/iLGUE
+coUvmMgmewvtJJJrKJhqBCHpmZiOJxYUEWjKzULO10E
-> ssh-ed25519 r+nK/Q 2cOo2pK5KN0keAbW62MaC0/wDysciEZPgY8+3vhx30s
+-> ssh-ed25519 r+nK/Q iuEli8ApCKNau1Ugl/bpeQcW9ONQGi8NtvWWJpLHGDU
-ZmjX2vi9qYOVWtctWcEt95l2kBlZH1uNLFUdUxSHyus
+VMf6rdc0jjRY3ccMwoyf2omLklZanhbxrBeNVfN+l6o
 -> ssh-rsa krWCLQ
-xNCMgSxO8SA2rQqU14RD2TU5PQyssMlWomoA9VjoT6FsYZleRd7nPeABYqlnzUNj
+UcotJT8W4HRBV4IQiqlgPZnZnd/htvZiZyT3XNdhs2PBHbMWdG/86EQMUg4VH9yQ
-wWk3obSp3AO+NNscnmFrAijYQl0C+hBBplsgEyQ87j60s0ReAZGaURbrxRJr0dr/
+MduYfcr53BUq0usGIWaz/fKCTTTNvnbtu3FnnMpYjsraTomR4sY8JoCabl3v6jWA
-2JBrPtQ7tiSQYRZG9DH6ASUYrlVCB3Vq18OOa+os8PpqyL6Q6pglx0ePY1wx9irG
+UNYEcE5+5Nttx8NhYOK3AIi6xId2JUU9ju7/TnIbQzJgSNeF742EymAOKPT0+RB2
-6qj54LAR34C+uOi620LZuJ3YhZYIp0blmxqrXGeVTY1c7mmELKCdslFpiBvKE5jf
+XlMKbvLqoqW50JpYu1NZMJX0ZRv7BtlwdCUzh5AMpTHT26JaWQDD4sx0OquCKfOY
-71Lj6ihc5Z5kJxi0vPXMXkuGXtmlIr57dre2XWhynuXq9sLj0KEE0GVQa/vMV3Hd
+d652PN1goGXTruQJE8zk8eln8575hFlze6cBSXEg7gZjDnKHIFZMZTHWss26MzHV
-4/ATD4bbpkzwkfZIlL1LRQ
+R8AnyF7o6IZ2SMBkk91vhg
-> ssh-ed25519 /vwQcQ 63EfH8Eu6Rdyz01sN7yfpaQpxJ2w4VqzQRWMw3AMSAk
+-> ssh-ed25519 /vwQcQ iHmADnr9AGlGgDADay5pgIz/QhmWWtFKhHvP9L08ZFQ
-bj1CFYkCOcoMtuq/mC+vn9YM8aM9rLClcGo1rpytN7k
+w63c1jKC/lI90DhmXpIi3//fq9ZfVzWMqrmQXZyT48o
-> ssh-ed25519 0R97PA gOIroiigdZxulsng29mz0o3gLYnMb5YjmBOmTd9UvHw
+-> ssh-ed25519 0R97PA Gd1UrJXNWN20iosx5GVhXFaYipVHSES+dhk/M/Z9oV0
-mgvgYedm7U1y5BlRcvPEZhHpPEnczungDuBAEGcJwMw
+myKtTzEmBlFeiwXmhJoF0v+A/Rvx8q1AilR1Dh4w4uA
-> ssh-ed25519 JGx7Ng FeQyBpbGZ2WGztFXBpJ5uYXIPIEJqnf2FedleYRQJUc
+-> ssh-ed25519 JGx7Ng gHJNedmJ7UdIwhqq1tWxGa4cX0LcZ/VaenKM2J9F7lo
-SzbinTIdwa1pvc9AZSWj2GRR86hD+SHY63QzBSv4D3I
+Oq7wjxPALgXglkCCoNO4UvR2vzJGmPHFDHeOqktVuwg
-> ssh-ed25519 5SY7Kg BgCKJrxjRS8QNCndIfySdq2u+hv3Q7Dg/hToWOE8e3g
+-> ssh-ed25519 bUjjig CRXtLDeT7jqwKLpaO4/63JnetInAQkaIkE6mxc5N1UI
-/rKzCb9fdZTEwTP1/QW4vn1ewQDn5TtV4Ui3MwChdB8
+gMYkaaGu7xpZx7KvZ6P3WMoOozF2Agmyl7B69H5nppc
-> ssh-ed25519 p/Mg4Q ftfpqvy3TuWoq+Hcmt+oYiJ1GhwYvR+GDh3MzVsfv3s
+-> ssh-ed25519 DqHxWQ otOMVwImeWqKrTFEdIJyPlYSopD6k6hFamQPpt2nLBE
-I2dj0FSRGfoBqwSetdKz9NX11zUeHxIizmjctYrmjD8
+CxNSm1/LMwP0zqg17yXVRIdiZ63pDm6qIS8wP/dKCD4
-> ssh-ed25519 DqHxWQ Zs+uNTp/4plSisoBzUpnvlZXLrbYphYvaeogHCyg4As
+-> ssh-ed25519 tDqJRg v30xkeXkoFPYKs4Dfi37CEgyv3hv574fotA77gusoxs
-hvXMQNPnJK7ZQrkYIyHW07rWd06QkNpiNuL3oUXxoQo
+eL7E6XA/MEgiYAiQPXu4oEFTNExWWwZY82neLzGw5vk
-> ssh-ed25519 tDqJRg hMw/doebsExNtZ9oC1OFrnWOsiPOKh3D76RPfw0If00
+-> ssh-ed25519 9pVK7Q hXrymfnHQQixF0ov9Kt4wkeCr7aIKju3rFd7KB+zeAg
-p5dxioeIt558deMFrRiTMxYocmP6p8kTk/nzSb5yuPA
+6FlfRrh/KSOpbcmNzdG7DuSX9vtZbWNMk27WJjSG23g
-> ssh-ed25519 9pVK7Q mctwqK3IkQdbeajO9mbvejtG85rFXTmFdptrzIzP9Cc
+-> ssh-ed25519 /BRpBQ f3ydj4vyxTBOjOcOLVQvFh2l2p+Ugmj3kZMFSikbbFU
-sVG1NKMmTR0Sf60hvPJ4QRypmBT4a6yUZ+gyp/Xf+EQ
+/5+bHomn/HADptsbxi4pdK+qxc3HA+2NETRKhJKYGx8
-> ssh-ed25519 /BRpBQ C6CjF9H+x1fd2s4sjHw0IzKpNvbnr3H0tnxJdwzrzlQ
+-> ssh-ed25519 t0vvHQ m8IWCX3aEQmx8YXy48zMxDyujTLtJyApVapU5I1LKi4
-gcrSM7NoHqeFdsTAWpO23cfAISile0uVEHu4fBvqwME
+YFoCQX0jPMi55tsD+uNvHofawW+MXgoP1nhflZdKKIo
-> ssh-ed25519 /x+F2Q t6mrvde1VJP7ARlwQAFOQxg6Uu2+GDDzN8GG/F/C5zA
+-> ssh-ed25519 E6cGqw 4qwrLGLPM+hDxoMPdNnp63D1ntx8zNb8/Fyo/3qyySs
-z3jOcIvHjH4TgiMHqABBU5t9bilBtv5rBKHJLMp9CaA
+k51U+tHb8KPmWMzhrZceUivFJKg3gzCAGpqCvDyc3xs
-> ssh-ed25519 +MNHsw 5FBjw08c8F2wqrJe8KfWdn5bjzYmXXqLpVIozq8c8WE
+-> ssh-ed25519 EEPmeQ ccgkj2wETQMmyOVNl0elsPPN2DvIgEooDOI41rJ+/C0
-47oEgYMsl6/JtL1JqOOajHdB22gIdIGhhtcchUK7ZX4
+mYWPULU3MyHpz6j28FbIDHhp1VeH4WRipiG/AkWp3iw
-> ssh-ed25519 rHotTw 4/W5DKJCc18KOcJQ1s4DveOVEjf5oy3HeQF5AThpvFM
+-> ssh-ed25519 +MNHsw E4HK1QIJb4e0HzJNFJoHWhIM0PAz1UMEfFGRbIbwEXU
-vG9LsTXTFk6TLHNDDS3qtirjm7iyZnhN+FM++xU0qGI
+yi3ecinlgUVuMbzFTC5u/R7NNr+knaHnw7zhXo4U9kM
-> ssh-ed25519 +mFdtQ bh0b+b2J2dg9hpBVYM3hDUwJOO/xi+dcH41abtVjt2E
+-> ssh-ed25519 rHotTw hBtzSPFVlxHmakQaj/kJGGZ9vcLoM3DjwL6xj+gC+Xo
-NPU1M+fXjOSROEWY73hftAniWUpr0ymbfo8mqZTPC/M
+w4XbILzfS84Igno8z1EfjJRbYlQvvIpRlMVXt/+CYU4
-> ssh-ed25519 0IVRbA ioMW4UYJ+kKlZBdf430FHnbqdw3BcwWSr2RmOHCv+hA
+-> ssh-ed25519 NaIdrw 3ODbuYhG3Ts572UCdq8fUSc9frKeXlINUdVhy8LFnVU
-qw0VDAu93LSEZqhs9nRTCMGWsXKjxK65VfkKJbUU5fY
+3nvYZhuRKXm5EHd1KM4uO+3irxQDLHMdN76MhPFpvR0
-> ssh-ed25519 IY5FSQ 1aD4KWKITo+88CEwuTKq1QH+Pf5qoOXlI+EY2FX9IG4
+-> ssh-ed25519 +mFdtQ VSTpZ8+P5jbyuuOojTKzIo6YmW4adRbG0rssUEocgho
-KzOGMeIxLypf7S6WeUM4Zr/S/g9HWXHBGcKkgHMLRJc
+ZwnC32ywtC6c1cebe2XF9t8x9TTRtt2B4ZlqM/4gOzg
-> ssh-ed25519 VQSaNw fCt2YDODTAtamSSYH+RNIpWAQ53WPwOeR92rHa89QBE
+-> ssh-ed25519 0IVRbA 3rhK2KihTYJDysIANlpZLYCbRguv1QOCbKgdocPWDEk
-2KAY4EgfxnNxvQGV4lgoGT+sb4nJV1eE50GHRljngEo
+d3pvvkhNxXcNZ1HwUiyquEspwLibyYGKCZrwz5B2T8g
-> x!p-grease Qza ,IU!}' (fMHX0~ m
+-> ssh-ed25519 IY5FSQ p4+vtg7SON1fIn6fUOhnd2Rxt+9eVEqls48IIBBOqkw
-DGgaSNyr7o+hl8p9viIHBbTdiTdY79TgFsTdM2oBJAqT5P/LkFzg8TYNsH04eReH
+EkjceamiQDQLRRuxQt3mG9WQ96F3XSAAktKg9twGwhY
-dmTu9wjN2OM
+-> ssh-ed25519 VQSaNw sk0bsPgWlMBXk7DI7aDBuWZ4cNsQOVnpQmBJinqXd1k
--- +/E2Y1+KnzcreXm8DtJE39wR4dVL6vneloVFzK33c8Y
+G8DAz80agW6qCDcLVewfxZTkae/JzaFDcenlFHTYjPA
-T|ïá+¡ÆTÔŒÄ
+-> \cr-;-grease DZ^oMD&2 GB%w]p #g_
-vÎ§“8»,OÔ¸lžÇ±z)/0<30>>hkJMèl	öÝ®GØßûGÜ>lU¯1Ÿ}€Š¤£T<C2A3>ÞhèÅý,åÎ8Åç%ßÓ¤lQ‰
+HMU4jwh6dkuPjOepUsLjSvO9JXRa5X5TUMVOdrYcv39jNvDnx8S+BJAs6BBVhOPh
-ëb©,@
+csvWfFwTPA
 --- UEkzkRDhvHIrTFs2UXLTuJZY/ILa9uTI3QdkNQrKbHw
 Ài´:®¢-äámlZšP 9{A‹’Ò€ˆ‰~*…#Å:.j/¾ê“µ‚B`KÓ5^P(u“õÒt³¶DûG_…®%¡‘èûG€s]ðŸÁßÞB{àws³¶V8e2<65><32>aXÓ$”ô2M
--- a/modules/nixos/dgn-netbox-agent/secrets/secrets.nix
+++ b/modules/nixos/dgn-netbox-agent/secrets/secrets.nix
@ -2,4 +2,4 @@
 #
 # SPDX-License-Identifier: EUPL-1.2
-{ netbox-agent.publicKeys = (import ../../../keys).machineKeys; }
+{ netbox-agent.publicKeys = (import ../../../../keys).nixosMachineKeys; }
--- a/modules/nixos/dgn-node-monitoring.nix
+++ b/modules/nixos/dgn-node-monitoring.nix
@ -33,7 +33,7 @@ in
        node = 9002;
        cgroup = 9003;
      };
-      description = lib.mdDoc ''
+      description = ''
        Ports to listen on for each exporter.
      '';
    };
--- a/modules/nixos/dgn-notify/mail
+++ b/modules/nixos/dgn-notify/mail
@ -1,50 +1,55 @@
 age-encryption.org/v1
-> ssh-ed25519 jIXfPA zVe/xwQCEtVnX8qWShePzBmhfQbENRMn8XgPzEqb1gY
+-> ssh-ed25519 jIXfPA tqrbtRQ1sOAfNdcydUswVCvTPlMOyxJk7KIWuVo0zTo
-CFa4qXtY8lBlSIxnWVbejVta8BFYmsCtp9TdXXexZYE
+8NlgzrKyFh4K5NreS0CmBNQ2ZmiLZYpD+fhbqNX/aAQ
-> ssh-ed25519 QlRB9Q 3EJeDSBkwJU2LaKHygG/a0tfFRXcp8SNJBxyhIOwBDU
+-> ssh-ed25519 QlRB9Q 9so2ZMz5fmmbqRpwEtJ0/u7iV+MLLLkDgODMfu6rdyo
-PI63A4YJFC1XTNPbl73SBlUMV25o0ZeojAr8tr5mtlY
+mYpFyrEI3p5uIvogAeTTgC+bHNHBx+eR6VGKMx8hIQk
-> ssh-ed25519 r+nK/Q /4HQCHPBBk7lD2mwJOMEmTeRpPGnPgTcL+htNRvkxkk
+-> ssh-ed25519 r+nK/Q ldIiggaMYAi9twBQpG5w6EA1stvDYgznDytN/zN0IDM
-oXLQoX+AK8zn82wsnLHK4BOpK3gn5lThWiFXh8+rxUU
+bOqzUc4m/pecyG+6jv8HilAJKJS5ywiagv1IN3DMtEM
 -> ssh-rsa krWCLQ
-ox5TBB9buXII2U32S/XpQVdr3r87p9lt/7WwELq//ik7vf4B6mZPbYvIV05JZ5bO
+OypBhkIZl8NGjojPR0Lg0A3SG9BhkA9oocO1zQqGh+gJdO1X8O3m5cIdxu7Ggw8s
-4f5khDdw+q1bbniDCBH2aPKM0ni3wBdLkT3jwdQBL5imSQuly/cFMdvVwSTuwN9k
+RE+B41TWwEfOV0KfRdOBoVxTLYg027f5/EnlU0G5igGUCDt6vDgyScLsYkdiPUYs
-8smSavsUYK5q5xgE49oMYJBAhNVGFI7NKlx7/a3VaVybsLAnzp3AeWy1o5BB1fKT
+7otyfXpCwM5eKpHV6q1qne91BjGXOiUpIPnlaOKXFvNkvNlihz9D1uw+n9vnsKGS
-7Emt88ht4lymL/gyxSMLT5Dreb5Sm+AcE+gYAK92OnX4Z1k8FqETppTKZDuoZUmv
+fb9jYX3fACcInbdnNOKeDSUE6+e6wj/ijOwGT8pL5X4cYmGslhfqk4WLubJIUoGx
-hJPpylXw7/YJU7Q0CluwtcGWFaTuE6AT0IrlCdY3NuMGA9IfpVsZr1kocdq2qB02
+6TTD0Qh0tiaWlbHJU6jB/Iv0zQgXDBvOCasN6Nlln+PYQnQ8N0gDRkQ8Eq+eKA2d
-90/yy51Ulwhfhiy1/3mlfw
+19komclluvh6zNZQHXod/g
-> ssh-ed25519 /vwQcQ SGCKP+4m5p9SiYnU3vL0QaKp/3+yztZ0snZ6os+mUAo
+-> ssh-ed25519 /vwQcQ l8YLbHxqW4Ynk9ElKIws+Z/cVvdYa9E/ELOt1gIkXww
-ZEVgV6jo7tRdM1KxQJ2UJRDEYaiQy9PYzaeSAstHYFQ
+nENmHEF5A73imF1H0m+Zn7Fzf2EFTyRPX8HTkgfWvLk
-> ssh-ed25519 0R97PA Bblz2DxUIBovbFqHhwGSRrs3Hbc1vNMtn8SK976YYAU
+-> ssh-ed25519 0R97PA FVqDeagt+Q8qXxLNaSU5AttATiVmHyQlZT2mv7ETshs
-FtEsqOUChH+uzFuTsATraNyyJXXdkesmbe8T+LeK9nU
+XG9/OKfvS/Q1yHHHexCeJ3/5HTu/oe8O5lIZJouANv0
-> ssh-ed25519 JGx7Ng 3umTe7hK60ghA4fXbapBRjjJ9K6hXLfV5kQrBzwsmS8
+-> ssh-ed25519 JGx7Ng xuF0PD3YtE8kqWBH+OnxI+Qw6AQZ9Ib53xpSm9NMrGs
-oRBFSJsVStw2ul6JxdJuan18GriwYF+d8asKXnWDpZA
+wLVrBPL4KKWf5AKIN7MZfIAzOoaeqnf7XswaSt8UHKQ
-> ssh-ed25519 5SY7Kg Ft714PG5dVVJWHu0aJh+wdT04vSb/vlDVsWmUhdjUXw
+-> ssh-ed25519 bUjjig 1Ekic+sPi08+xo5Lx38SsIN78ODOaJJpuMPorgelIn4
-qY7OJduSibFheBQOrGnSFUOhou/WyyY/M5tAYGvaTJI
+icUH+He/zxMhoDsakE8lJ1BCkeuwm3izXVnugQrxoCk
-> ssh-ed25519 p/Mg4Q u6ES8PpiDb1OY97sMQ/kL6sTIjBhDk1aqoIEd0I5BgA
+-> ssh-ed25519 DqHxWQ oQ1K9/CaOXBCqckeGC2M8rXtPiOSFFetK51+LU5NLGw
-pbX1Wk+5aTbf5rU2JM0rf4SR/fJGLKcDcqLF1yDXbiE
+zX2MVGKe7jdoPfJhWHd3M0cJ9uczWyyUqzFOZhP8DCM
-> ssh-ed25519 DqHxWQ n8qHGzdwY1RfajPN+oZV0Ps44rqbW5tcUFSSPbyZmAw
+-> ssh-ed25519 tDqJRg btCKh9SJuHDiGIQu3FNf3a04p6Qm9EYoTOMaxBFFbCs
-EAK0hA/94/ZxBz0iNaTl2RlpswiO+2eIWugozHrZZfw
+xsGNb+7jXb5MJbnNAJBZRwBvd7a0uFk8cZWWz0xPLKE
-> ssh-ed25519 tDqJRg RAEIORbyHLRNkm+mFsq07E1uzbEEIBQ3eG+kpyXLLG0
+-> ssh-ed25519 9pVK7Q bjH8hNGrjV1euwfetjy+P7FmmVEqg+D2VsyIbPN6dBM
-1S7gL5WgXiFZxgH6kSp1zANafDTEKsC4Wo4kT8oB7b8
+Ut+81wp4IaHYgR7mjAHiPi3uC5K5l/wLrtUEwxxhVs0
-> ssh-ed25519 9pVK7Q p7tGHwbC3CWap6feMXq2twGHkyszLP0EKwhW4McAoj4
+-> ssh-ed25519 /BRpBQ nYOgDzHkeh2T3vcC0c3X+/5GPmn4AOavPaLtluG9/X8
-7F0zZEON8H2H+v0XRCOiYeUuhJBRUVkFoEP+Cz4vHZo
+yLeebplBqT7cbo7mgZJvbqVOf1SPFFAs/P8lwVUBjnE
-> ssh-ed25519 /BRpBQ stXNcOvGwPBPz8TtLhQUVgpcvu4BtfUACAZtrEI0eGY
+-> ssh-ed25519 t0vvHQ R14ScgZyALLYI9VQXC9ulRiIT6pKeNjsUETqmf39Ajk
-FN2yFmvc3GhMGNTUCT+XMr1qsfLvmjHIkYoi5B3MDsE
+8sATMxF2qt2ZquQkL8lUjtYYCE/c6HAV7CzVBXgAlzY
-> ssh-ed25519 /x+F2Q fmGbMAGFJbjR0zVdJqsigKQ28nbDq8Zx1FsgviLWqHc
+-> ssh-ed25519 E6cGqw 0kdE7TYnCGGB6laGnB67OFIdI5pKo9k/4M2hSZB8dVg
-+v09rkeHZTvFQLaXfOnFaZMBc2G2BD5dXWYg/Nlx2Og
+6ZbKr6REXl2e589LDQjTdXAOSxKo+Crzb/qU3UiT7Fo
-> ssh-ed25519 +MNHsw KqIxZ4L1aoqLevCwx6Zp0jBHfTOU7WdrE0UN56/xARE
+-> ssh-ed25519 EEPmeQ iKAT49L0Ps0DPUc/jHZ1eYPQvkouTbEaMMT1WgGgNGU
-OwQ2/WUEfl/oXxfbv5rlLu4OOdrACzPfSS6HfcLpi60
+5tO5/612OXfDVgPkC+pObQJP/EqIljq1Sb5/sEQpKOo
-> ssh-ed25519 rHotTw hwCwUHi/xbAQaWt26kOn3/QSP0m0ZKRdIYs55TDMLSM
+-> ssh-ed25519 +MNHsw +XV+vFgYZBjgS+MKcIx1YaZgV34konYI5r2okZWcpE0
-DCvnBearzyPQ6ErYuawsyobpMsD9SSEhkVmFKyp5jUI
+xBVIa8Zep/eRgD2gjPooTS5oQuzgjRxw3cvUrVhbFLM
-> ssh-ed25519 +mFdtQ ZlEsxLPDfy29aIQ9eNsRkZCHSeRmX8+GsuGtikQF4ms
+-> ssh-ed25519 rHotTw kpkPh9yUnPayJBCiUihPbSMIGiCMNV3Q9EX/GqrDuEY
-n1N2xQb4oRWaJgLtrXMFasc8u516e1M4Q/qLNLA0e0A
+9U+MZrgXh8wWMr+YA+OFHzVtVoiNXusQIAKHSIv5dy4
-> ssh-ed25519 0IVRbA keVcQ4Vx3Avd97N89nUklRnGMABBenHIi+aufVoTABU
+-> ssh-ed25519 NaIdrw P7GGMkwEt5ueKMBok+EpEmuomOQtWMGjqShy2zMcziY
-yrsC1OitS6sqbUsaIaWeU8vYGOQm9afFfc6DprB8Whc
+D38Akh4B2IIhiMHm9L4BAlXkqtmRHBFNYnq7MBxuLEw
-> ssh-ed25519 IY5FSQ npdYCAEfVSpuDNMZnWS469BgvivTKHRKtEAtxmxDZl8
+-> ssh-ed25519 +mFdtQ q0Ry7jtJzq6UfKDbzfovl5KBjdJtOKxlzMBKOBt/wl4
-gOB1vpBO8ZqtLVwxCj8V/KrWgnYmZGn5QQJzMhiHH4A
+5LE2G25RaXJSNC88AUKZVsec9f6kRMTrRJH0f+rHjiw
-> ssh-ed25519 VQSaNw S3dSnOPVQdMcz1dJYai0DvZATuMBDsG/+a0sJBDc/iE
+-> ssh-ed25519 0IVRbA E9wi9oRwNigFI5Gx6rOzdQRmLsaG7bADK0JwevQnHHk
-Q1gl1nIpDESMvTBX03i4lStAtdWqlTkVABHZ3cqocDE
+R3ssmspGUasfQCiak6mbelWszIEfgBhoUSwTmVAZVHo
-> t-grease bvZAq
+-> ssh-ed25519 IY5FSQ XecGNqCa7W77aVxHu2PMyGP3kjJaIuMkPu/uxxmcTWM
-NTQBWWf5UW4zsTEEt7rgmTv+B2rFIk/8WwQPrC/s59Ik
+XBswdNeVgQzf1dHC7epw/R4aR+aPM/D6Ojfemv6h3Zw
--- 46n57xU0XlDQgUM0vIYveqDifz57FrTcRwCEpoh62+4
+-> ssh-ed25519 VQSaNw W9s97+9Zp9HHHLujy3AfY6AmhXG06zubbKmzuHfI32E
-[›07Æ~Þ3dïálÃÅô!f›ãš4ÐHßA‘‡íœ÷<C593>9
×ò@d»BÌ&½L‰{aãþm…X2ã’D‰Å´
+6sBZ/SCxyOAYxusVng5xTp2FIWP46svn9jHrGdDoITY
 -> QywF>>&-grease
 an4MLFRuHd5YzvAuctEATrgtHX6ptlOPxRnGyFsIZEx4CVadG8bEn4+aPF64Bvxy
 RXa8
 --- fF16JxCEn1JKV0R0onxLmfe1SJViPsfwcW/aNzakOlI
 ™dØë¦\YjÐÙ\¡:ìls–ZV¸¦©ë
ñ‹¶÷È"é³‰]…wOpì4àŒƒeÔÅ9¨Ï±üB9<42>
--- a/modules/nixos/dgn-notify/secrets.nix
+++ b/modules/nixos/dgn-notify/secrets.nix
@ -2,4 +2,4 @@
 #
 # SPDX-License-Identifier: EUPL-1.2
-{ mail.publicKeys = (import ../../../keys).machineKeys; }
+{ mail.publicKeys = (import ../../../keys).nixosMachineKeys; }
--- a/modules/nixos/dgn-records/__arkheon-token_file
+++ b/modules/nixos/dgn-records/__arkheon-token_file
@ -1,50 +1,55 @@
 age-encryption.org/v1
-> ssh-ed25519 jIXfPA YaucboAId6lgc1Y/jV6hLyovkJQnMBnKhJ2QWAci53U
+-> ssh-ed25519 jIXfPA Fg3/a46Mon39gTFeQkn0wtxbwsTzeBUNyEAaNHd27hQ
-Q8RUPu4GUC5QbzTROgL9xaG3BUWO1QU/q1p0/yimBQ0
+A78ImPc4lST6bAeBmWiWxoICV4JVCJVAmKuQJySerHs
-> ssh-ed25519 QlRB9Q y1tbd/81NoECRtKwOw41Tlls5y+WSu2jGmeOlC939VM
+-> ssh-ed25519 QlRB9Q P1C+ZzsB4oAWkwIq2zcaqoukMMo+yFwk9g6Al32fCWM
-DT1zZgWJkkIWRWxzfu4VgiGpV8CioaDKnVemowH59N4
+G+M9cYya5pX64/oEbvpvha2qbQg4y8frl1i18ZIG6fY
-> ssh-ed25519 r+nK/Q dDmGkZ3Y7xAzZGKvGIyIdhD+P0tkV6SMPx3UxphoTXo
+-> ssh-ed25519 r+nK/Q r4kctDRssAYznMRxHJqu7/GoBHyibP4xWdua6KYnpU0
-tkanRbPfu3/cuMPoTrcWBlNcu6RmK+txif+9aIRLy+s
+l5KS9reXjT2P5iUCe0swZmK/m9Vg7VvtrK4L/TaEuAI
 -> ssh-rsa krWCLQ
-IZGpFoWjQuQzqkS2KbpVr+fP7NLPhyaxS4yQroVEkPEZnXx2c6eH3ul218zytZld
+g+zPwOWXgd06McsOCwo2QjAQF7B7t8oCf5eA5K79Om/X63VAqakts3ilwOt9SgZk
-YRBCxiCtV6VfOB2N2QGuiK7YCGl6oUfN1DePy0jPrGKsnvWBitTuqzADiGQB7aSI
+yQYa72TP67nyljLO4tPG7u/aKIBIwitGXIIYs+ZNLq9Q0ciWvzVAhsLsfi9yE7AF
-ie7GgblPpi4q3ovJPgf7Bs+Mi2dKW5hiD8Jnped7rEW7SEnESkQa3Cx22Ww/UYcW
+I3tnL03fES2v5sbKes/JulBQl+87065YZr67TNWRY9f7a0XQZtfewP0vOxxfJsSy
-9Uj7ZaDVVbP0ZWyc41HdoJwEnV6MYMRnXUJ/qrLMCIvRaYk8UdiCDgco+XxqAnbs
+RYBpztlzAGkaWXtqk2291x7yGhKsQWXmUhxx4KqyPs+KvFm1d4GglalFjhySzCkG
-iyUqCvz8iVNsWbJxK+7jJHXp0dQJRciHzSGStIVRSGx4gvuXOGjsuBMjfwoq1XoR
+Rc7Flg1ukru3Bd1/fieOWpr3DyDBQ8pZyS4gIUYLB7xcy2t1JI/U3egTQTPBCSgy
-5PE3BnP/atHZg3CkQcC2eA
+PwoWgyQ7lGLRIarTMRa1JQ
-> ssh-ed25519 /vwQcQ WL0PdIIsSWzw+ar2QNXCp7Xs1NH9gUk2fSPskGC9o2I
+-> ssh-ed25519 /vwQcQ FOpyMB3qDu3HpjqsH2VVpInqlvJlZD35y/XNf8RkSXU
-+kHedFsYHgpsGfILtywJaIrTRj8HtHZvVyhtbRhKYC0
+ZUxuGbwH1XtE9Da+L7SjfoYinjq0cAwsHsDaz2u5Lrg
-> ssh-ed25519 0R97PA +G7wUHF6NJimsAxe6M9RVVTa3GLPoW1bhsgMsWXKNC8
+-> ssh-ed25519 0R97PA kphmpWyiMaxGmUAH4rvFUjtf0mvseVkPPBlMqKNE3lA
-i++lKoe8hFFb1rilkO9lcwBJujRqFsLGDOPvbaiz6Nw
+F1cgXiz2UjCHU0MeS5DryvOBtxW/1DIsjw28uQ1nd3A
-> ssh-ed25519 JGx7Ng o66YGXN0uMC2qZo1tVcEMOa4SwxNZaf4HvnGsgzlqjo
+-> ssh-ed25519 JGx7Ng ejW0Pf2cwsitmVLY8jJUaHZ/6Qhfxa7fnYWoaWYISWk
-Tc4KMMrnJbybrNIkhEJz42PVHc3fVMFFSs96lKsEKCA
+awOvJwkkFdXuc/ikZTX6512zG91FCi+0n7KaYrULO3E
-> ssh-ed25519 5SY7Kg P8Xp9wVJDcPdj3uSiq0yLnLMDInMeFs6XX30VwlXWlg
+-> ssh-ed25519 bUjjig 2Gw2h1bx0TRc6CmRjY8GPgtSHRs5rl/lg394JKiWBlA
-uJfxXOZl8EX8fjRsHZ61JMKFpYksZJucZwVaRJs7qW8
+yvltWHak7XMXBmBmlelE4pF5y1saRaQJmV5IUxzaPyo
-> ssh-ed25519 p/Mg4Q yUyxue7Oda0b+CjdF9VfUCliWyzXNOsVPH7OFoHzWCw
+-> ssh-ed25519 DqHxWQ gh/5iRZQbmbvwWGtah4b9MK3DNe4+UNiHoXPYnw0sEQ
-+zi+TSojvSc+VDXZG8XXSsTezxKRNC2XHc/hGGv4baM
+z/nbwMWAjsBRAzTMSS/9dPzXe1st8mQWiUlZnVmtcCw
-> ssh-ed25519 DqHxWQ 7Vnq/xidbguw/PkZPUOTHUBTe8/x4PvTjCusUe10jio
+-> ssh-ed25519 tDqJRg 0GBbdUBhJxdCICdp6WtgXW2GXfQskuxanzucrKRoBns
-7Sl1MptpElvEA9VUj7JiVGuEWC0F3aA2rgYvfIchOB0
+AW0jVC8Y8lbhycDgLzPu40kQtgb7OI7fyycLldXknwc
-> ssh-ed25519 tDqJRg udOCDV4/vszObNxcQhJ6iGiDkxgZlrBDyKt3MbibMx4
+-> ssh-ed25519 9pVK7Q +aOx8mN/HX4F7SdNdJZjMRWiy6SIhqFkWYIo+I24cTI
-CDDd0LNCCdYvEww/h8q2z4f5QtjnL+kJsnPFtlbiD28
+IQCd6tA+bUDlnW9JsxVE02EBKj38yYDybBe24PxXr68
-> ssh-ed25519 9pVK7Q DXqkIewHGpUUDtL2ivAoFwY/HCjoQXjxoHGPGkuFfH0
+-> ssh-ed25519 /BRpBQ 8UN2aIKUhi3JLhnOoOs38+a9qx+UhDnV5tYlWVF8d24
-JZ7xC2kdtnRNq8WADL2SNw/Ukezu1s4TuUbQnbP8L4o
+FkScXVvXdhFbDGs2Ks0BYfj9nJpAUVPz6OhX7vkOTmI
-> ssh-ed25519 /BRpBQ 9j1+wzO733ej03ra8LQOkpOyvY63UCbO9sfT6bV6+zs
+-> ssh-ed25519 t0vvHQ wDCpgqimo5goEB9Gj5/QGQ98nTEkKy/qHyxPg3NA6Ss
-2F0UjpAqgCK5JS0y0kkHX30EV8JCcjhnJ1NkW06ww4w
+sielO8aAj9ke+nZL+F/zyMUzUPn1LjtKrSkAoMW6YYE
-> ssh-ed25519 /x+F2Q wYchtMn7MCGllfiFwTrycdLEY3dl297ns26PHs7l320
+-> ssh-ed25519 E6cGqw zbwhYf2zKgjdymEjG0sVuqQQ/CgCDnSlT72OrAUFSiw
-feRd57Z5k6iJ71JRHud0wyYWo3O56q4rrYZt5y3aoqA
+B70dyGna1SRXvf5SLJCiZGeBiXwS9nf3LPTBkG/3fGs
-> ssh-ed25519 +MNHsw FHfvx1FQWcsRlKrFF0SRcVZ+XG6LXBwIMcPCVeu/ZCg
+-> ssh-ed25519 EEPmeQ 06lIugc0LbiXVFwbV/6GKbSnlac0ROIVNmgS2Q9MM2A
-w9fZGhZpEJHlf8JPcbWcNoAO9S06hi15LZxkv1dJUWk
+KTUmdmSXZT2D4oQQpO1qNsdOn5sH70ameln6i7Itb+A
-> ssh-ed25519 rHotTw QDcThfb0AJMQBfQDbbtqm6z7BGxC4/sBioprElUTXFA
+-> ssh-ed25519 +MNHsw OMAS3ud2K1+JGVytqHp9P/i+r4apcb91Dyc+tTudpQ8
-2JOFoMLcVhMoGzZDDNOTL3PBWsqVnrFx8o/W/cWuzl0
+V6T+VPSvRZ21nVtDeRkOsuP62bECSGcIm8vO3JADxVQ
-> ssh-ed25519 +mFdtQ tWg17VH1Q4gQj/1IK9yrxjw4kRPzsp4dDHFwDKYxvDE
+-> ssh-ed25519 rHotTw JAc7ZlrFGL+DXq07YrmqY4lS5Pib31RoRTT6o7zJH04
-9H4ohD3XN4Xtk15SsZQf5k0db+yIVcWp4EV5jKsZgHI
+Y1qLn6nWk7FfkrWIiBBd7BHHp5WXHTZfq734DMUlB74
-> ssh-ed25519 0IVRbA rkMPsBgVEaiYtaBN5JzHNCPFYFKr/7dqoY+RX19+03o
+-> ssh-ed25519 NaIdrw ZWfEZfhiXxkq6P6H2kbiVZiiPxH13Cehk+2ti9fYx08
-baQK5t5sG8WabaCuMTZ2ZIfMTRH0jQU4l7JEyJ6H+LU
+gMlI5Da2cgP7m2pZnHpwJiA7BVVtZgNyZnPkYqhBYHQ
-> ssh-ed25519 IY5FSQ c1+2+CMJFMw/iF2XNx5ma28KhwdKKQ9dNC1nBvFz/B0
+-> ssh-ed25519 +mFdtQ GZQpMTZySkDwDvzpWou8nfvAtYco/v4xF+YU7LYjAAI
-3AE1FQq+//dNIQfuW9BHcpfNbGn724Ydq7aJc95KmmY
+deNceVs+tUxiQy2JHcoOd/w6KLYnxuDwrIPoVWJ66Vo
-> ssh-ed25519 VQSaNw t9yLak0T7FO8hgGrPWFeR3Jw0D6cPxjR5LOIcMnAmgo
+-> ssh-ed25519 0IVRbA S917NcJZ75oqjwGMMwknUFcHYJ2TCkEt331mpOZ5DxI
-869SBp0nM5v/9+Xjib6rkmmelhTBfXcyuHiAXh08AWo
+khoDidhLjy1wIs+qGAfx/qH+t4ROB71QeiiUmnpZ1s8
-> r32t]I\-grease ka<*
+-> ssh-ed25519 IY5FSQ 2HjLcN2RK/dtAeHXUTu/Du4LiBH4SxpG0d6f7QCa61Y
-nkxH0w1aQ64
+ql6B8ZZzEaz+Czb0TRT8pF1KD7dhEv0XE9k9IJ9AgBo
--- LlTR5EcQzCLJ5trkQcomW0+soQoec/IZZNW+g5dyOo0
+-> ssh-ed25519 VQSaNw aAcXlRKzMgw847XeDTqnh+4XvApVIE183gJ2O42eohE
-M"ÏLm“õh]ñÖa£uq±ýÏ4ßÏ+ö“9;Ð¤ˆÇ-Z±L»¯H0o1»Eâ<>
+wndgsI85eDc+i+CBPmo2ym5koIvTMS9mOuWdLvLM3Qs
 -> lm-grease -KjCZ 46y2wU x1
 1iP6
 --- MthoOm+rboJhFyo+SKFlPfwT9V3VeaKl5xQ2gs0W2ns
 ;Ö<>ÓÖ"b/‚éðÙ*ü}ýeÁ½g}âLšq
 zGŠ~Q.í_àX{½ËìA	ùþó²ëöË
--- a/modules/nixos/dgn-records/secrets.nix
+++ b/modules/nixos/dgn-records/secrets.nix
@ -2,4 +2,4 @@
 #
 # SPDX-License-Identifier: EUPL-1.2
-{ __arkheon-token_file.publicKeys = (import ../../../keys).machineKeys; }
+{ __arkheon-token_file.publicKeys = (import ../../../keys).nixosMachineKeys; }
--- a/modules/nixos/django-apps/default.nix
+++ b/modules/nixos/django-apps/default.nix
@ -732,5 +732,14 @@ in
          ) config.extraServices)
        ) cfg.sites);
    };
    dgn-backups = {
      # jobs = mapAttrs' (
      #   name: _: nameValuePair "dj-${name}" { settings.paths = [ "/var/lib/private/django-apps/${name}" ]; }
      # ) cfg.sites;
      postgresDatabases = builtins.map (name: "dj-${name}") (
        attrNames (filterAttrs (_: { dbType, ... }: dbType == "postgresql") cfg.sites)
      );
    };
  };
 }
--- a/modules/nixos/extranix/0001-revert-don-t-parse-md-in-js.patch
+++ b/modules/nixos/extranix/0001-revert-don-t-parse-md-in-js.patch
@ -0,0 +1,147 @@
 From 5e5f68209b3b023fce260c9da1625844ca4d3c22 Mon Sep 17 00:00:00 2001
 From: catvayor <catvayor@katvayor.net>
 Date: Mon, 16 Dec 2024 00:11:47 +0100
 Subject: [PATCH 1/2] revert: don't parse md in js
 ---
 static/js/script.js | 106 +-------------------------------------------
 1 file changed, 2 insertions(+), 104 deletions(-)
 diff --git a/static/js/script.js b/static/js/script.js
 index 04234d7..d3ec223 100644
 --- a/static/js/script.js
 +++ b/static/js/script.js
@@ -27,97 +27,6 @@ function encodeAttr(str) {
   return (str+'').replace(/"/g, '&quot;').replace(/</g, '&lt;').replace(/>/g, '&gt;');
 }
 -/** Parse Markdown into an HTML String. */
 -function parseMD(md, prevLinks) {
 -  let tokenizer = /((?:^|\n+)(?:\n---+|\* \*(?: \*)+)\n)|(?:^``` *(\w*)\n([\s\S]*?)\n```$)|((?:(?:^|\n+)(?:\t|  {2,}).+)+\n*)|((?:(?:^|\n)([>*+-]|\d+\.)\s+.*)+)|(?:!\[([^\]]*?)\]\(([^)]+?)\))|(\[)|(\](?:\(([^)]+?)\))?)|(?:(?:^|\n+)([^\s].*)\n(-{3,}|={3,})(?:\n+|$))|(?:(?:^|\n+)(#{1,6})\s*(.+)(?:\n+|$))|(?:`([^`].*?)`)|(  \n\n*|\n{2,}|__|\*\*|[_*]|~~)/gm,
 -    context = [],
 -    out = '',
 -    links = prevLinks || {},
 -    last = 0,
 -    chunk, prev, token, inner, t;
 -
 -  function tag(token) {
 -    let desc = TAGS[token[1] || ''];
 -    let end = context[context.length-1] == token;
 -    if (!desc) return token;
 -    if (!desc[1]) return desc[0];
 -    if (end) context.pop();
 -    else context.push(token);
 -    return desc[end|0];
 -  }
 -
 -  function flush() {
 -    let str = '';
 -    while (context.length) str += tag(context[context.length-1]);
 -    return str;
 -  }
 -
 -  md = md.replace(/^\[(.+?)\]:\s*(.+)$/gm, (s, name, url) => {
 -    links[name.toLowerCase()] = url;
 -    return '';
 -  }).replace(/^\n+|\n+$/g, '');
 -
 -  while ( (token=tokenizer.exec(md)) ) {
 -    prev = md.substring(last, token.index);
 -    last = tokenizer.lastIndex;
 -    chunk = token[0];
 -    if (prev.match(/[^\\](\\\\)*\\$/)) {
 -      // escaped
 -    }
 -    // Code/Indent blocks:
 -    else if (t = (token[3] || token[4])) {
 -      chunk = '<pre class="code '+(token[4]?'poetry':token[2].toLowerCase())+'"><code'+(token[2] ? ` class="language-${token[2].toLowerCase()}"` : '')+'>'+outdent(encodeAttr(t).replace(/^\n+|\n+$/g, ''))+'</code></pre>';
 -    }
 -    // > Quotes, -* lists:
 -    else if (t = token[6]) {
 -      if (t.match(/\./)) {
 -        token[5] = token[5].replace(/^\d+/gm, '');
 -      }
 -      inner = parse(outdent(token[5].replace(/^\s*[>*+.-]/gm, '')));
 -      if (t=='>') t = 'blockquote';
 -      else {
 -        t = t.match(/\./) ? 'ol' : 'ul';
 -        inner = inner.replace(/^(.*)(\n|$)/gm, '<li>$1</li>');
 -      }
 -      chunk = '<'+t+'>' + inner + '</'+t+'>';
 -    }
 -    // Images:
 -    else if (token[8]) {
 -      chunk = `<img src="${encodeAttr(token[8])}" alt="${encodeAttr(token[7])}">`;
 -    }
 -    // Links:
 -    else if (token[10]) {
 -      out = out.replace('<a>', `<a href="${encodeAttr(token[11] || links[prev.toLowerCase()])}">`);
 -      chunk = flush() + '</a>';
 -    }
 -    else if (token[9]) {
 -      chunk = '<a>';
 -    }
 -    // Headings:
 -    else if (token[12] || token[14]) {
 -      t = 'h' + (token[14] ? token[14].length : (token[13]>'=' ? 1 : 2));
 -      chunk = '<'+t+'>' + parse(token[12] || token[15], links) + '</'+t+'>';
 -    }
 -    // `code`:
 -    else if (token[16]) {
 -      chunk = '<code>'+encodeAttr(token[16])+'</code>';
 -    }
 -    // Inline formatting: *em*, **strong** & friends
 -    else if (token[17] || token[1]) {
 -      chunk = tag(token[17] || '--');
 -    }
 -    out += prev;
 -    out += chunk;
 -  }
 -
 -  return (out + md.substring(last) + flush()).replace(/^\n+|\n+$/g, '');
 -}
 -
 -
 -/*************************
 - * END MARKDOWN PARSER
 -  */
 -
 var search, results, allOptions, currentSet = [];
 var lastUpdate = "?";
@@ -254,22 +163,11 @@ var updateOptionsTable = function(options) {
 -function parseDescription(text){
 -
 -  text = text.replace(/<https(\s*([^>]*))/gi ,'<a href="https$1">&lt;https$1</a>');
 -  text = text.replace(/\[\]\(#opt-(\s*([^)]*))/gi ,'<strong>$1</strong>').replace(/\)/gi,'');
 -  //[](#opt-wayland.windowManager.hyprland.plugins)
 -  text = text.replace(/\{var\}(\s*([^\n]*))/gi ,'<strong>$1</strong>').replace(/`/gi,'')
 -  text = text.replace(/:::\ \{\.note\}(\s*([^:::]*))/gi ,'<div class="alert alert-info" role="alert">$1</div>').replace(/:::/,'').replace(/\n/g, '<br />')
 -  return text;
 -}
 -
 var expandOptionMD = function(el){
   modalTitle.innerHTML = currentSet[el].title;
 -  let dhtml = parseMD(currentSet[el].doc);
 -  var elDesc = "<h5 style='margin:1em 0 0 0'>Description</h5><div>" + dhtml  + "</div>";
 +  var elDesc = "<h5 style='margin:1em 0 0 0'>Description</h5><div>" + currentSet[el].doc + "</div>";
   var elArgs = "<h5 style='margin:1em 0 0 0'>Args</h5><div>" + currentSet[el].args.join(', ') + "</div>";
   //  var elNote = ( currentSet[el].note == "" ? "": "<h5 style='margin:1em 0 0 0'>Note</h5><div>" + currentSet[el].note + "</div>");
   //  var elDefault = "<h5 style='margin:1em 0 0 0'>Default</h5><div><pre style='margin-top:0.5em'>" + currentSet[el].default + "</pre></div>";
@@ -290,7 +188,7 @@ var expandOption = function(el){
   //console.log(currentSet[el].description.replace(/:::\ \{\.note\}(\s*([^:::]*))/gi ,'<div class="alert alert-info" role="alert">$1</div>').replace(/:::/,''));
 -  var elDesc = "<h5 style='margin:1em 0 0 0'>Description</h5><div>" + parseDescription(currentSet[el].description) + "</div>";
 +  var elDesc = "<h5 style='margin:1em 0 0 0'>Description</h5><div>" + currentSet[el].description + "</div>";
   var elType = "<h5 style='margin:1em 0 0 0'>Type</h5><div>" + currentSet[el].type + "</div>";
   //var elNote = ( currentSet[el].note == "" ? "": "<h5 style='margin:1em 0 0 0'>Note</h5><div>" + currentSet[el].note + "</div>");
   var elDefault = ( currentSet[el].default == "" ? "" : "<h5 style='margin:1em 0 0 0'>Default</h5><div><pre style='margin-top:0.5em'>" + currentSet[el].default + "</pre></div>");
 -- 
 2.47.0
--- a/modules/nixos/extranix/0002-chore-remove-useless-dependencies.patch
+++ b/modules/nixos/extranix/0002-chore-remove-useless-dependencies.patch
@ -0,0 +1,24 @@
 From 957189be0a61f954a1bcfb204f982f59ae6435ea Mon Sep 17 00:00:00 2001
 From: catvayor <catvayor@katvayor.net>
 Date: Thu, 12 Dec 2024 17:04:45 +0100
 Subject: [PATCH 2/2] chore: remove useless dependencies
 ---
 layouts/index.html | 1 -
 1 file changed, 1 deletion(-)
 diff --git a/layouts/index.html b/layouts/index.html
 index 63a6158..780ea78 100644
 --- a/layouts/index.html
 +++ b/layouts/index.html
@@ -17,7 +17,6 @@
     <script src="https://ajax.googleapis.com/ajax/libs/jquery/1.12.4/jquery.min.js"></script>
     <script src="https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js" integrity="sha384-Tc5IQib027qvyjSMfHjOMaLkfuWVxZxUPnCJA7l2mCWNIpG9mGCD8wGNIcPD7Txa" crossorigin="anonymous"></script>
 -    <link rel="stylesheet" href="https://maxcdn.bootstrapcdn.com/font-awesome/4.4.0/css/font-awesome.min.css">
     <link href="css/nucleus.css" rel="stylesheet">
     <link href="css/style-nix.css" rel="stylesheet">
     <link rel="stylesheet" href="css/style-q2.css">
 -- 
 2.47.0
--- a/modules/nixos/extranix/0003-feat-separate-HTML-description-of-MD-description.patch
+++ b/modules/nixos/extranix/0003-feat-separate-HTML-description-of-MD-description.patch
@ -0,0 +1,25 @@
 From b0f6c845280bee20bcc28a136436e000bde8a457 Mon Sep 17 00:00:00 2001
 From: catvayor <catvayor@katvayor.net>
 Date: Mon, 16 Dec 2024 11:25:38 +0100
 Subject: [PATCH] feat: separate HTML description of MD description
 ---
 static/js/script.js | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
 diff --git a/static/js/script.js b/static/js/script.js
 index d3ec223..5d9fc6e 100644
 --- a/static/js/script.js
 +++ b/static/js/script.js
@@ -188,7 +188,7 @@ var expandOption = function(el){
   //console.log(currentSet[el].description.replace(/:::\ \{\.note\}(\s*([^:::]*))/gi ,'<div class="alert alert-info" role="alert">$1</div>').replace(/:::/,''));
 -  var elDesc = "<h5 style='margin:1em 0 0 0'>Description</h5><div>" + currentSet[el].description + "</div>";
 +  var elDesc = "<h5 style='margin:1em 0 0 0'>Description</h5><div>" + currentSet[el].descriptionHTML + "</div>";
   var elType = "<h5 style='margin:1em 0 0 0'>Type</h5><div>" + currentSet[el].type + "</div>";
   //var elNote = ( currentSet[el].note == "" ? "": "<h5 style='margin:1em 0 0 0'>Note</h5><div>" + currentSet[el].note + "</div>");
   var elDefault = ( currentSet[el].default == "" ? "" : "<h5 style='margin:1em 0 0 0'>Default</h5><div><pre style='margin-top:0.5em'>" + currentSet[el].default + "</pre></div>");
 -- 
 2.47.0
--- a/modules/nixos/extranix/0004-fix-indentation-of-ul.patch
+++ b/modules/nixos/extranix/0004-fix-indentation-of-ul.patch
@ -0,0 +1,26 @@
 From e31e0330b9b012b6e09f8eb6bc670e4336d1aedc Mon Sep 17 00:00:00 2001
 From: catvayor <catvayor@katvayor.net>
 Date: Mon, 16 Dec 2024 12:53:27 +0100
 Subject: [PATCH] fix: indentation of <ul>
 ---
 static/css/nucleus.css | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)
 diff --git a/static/css/nucleus.css b/static/css/nucleus.css
 index a4674a8..9ada521 100644
 --- a/static/css/nucleus.css
 +++ b/static/css/nucleus.css
@@ -533,7 +533,8 @@ p {
 ul, ol {
   margin-top: 1.7rem;
 -  margin-bottom: 1.7rem; }
 +  margin-bottom: 1.7rem;
 +  margin-left: 1rem; }
   ul ul, ul ol, ol ul, ol ol {
     margin-top: 0;
     margin-bottom: 0; }
 -- 
 2.47.0
--- a/modules/nixos/extranix/0005-feat-match-all-substring-by-default.patch
+++ b/modules/nixos/extranix/0005-feat-match-all-substring-by-default.patch
@ -0,0 +1,28 @@
 From 206ce2744cdaa166ee482fba90a879f2688b234a Mon Sep 17 00:00:00 2001
 From: catvayor <catvayor@katvayor.net>
 Date: Sat, 21 Dec 2024 10:14:46 +0100
 Subject: [PATCH] feat: match all substring by default
 ---
 layouts/index.html | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
 diff --git a/layouts/index.html b/layouts/index.html
 index 780ea78..c50ada4 100644
 --- a/layouts/index.html
 +++ b/layouts/index.html
@@ -109,9 +109,9 @@
             <li>Strategy</li>
             <li>
               <select id="indexStrategySelect" style="margin-bottom:0">
 -                <option value="JsSearch.AllSubstringsIndexStrategy">All substrings</option>
 +                <option value="JsSearch.AllSubstringsIndexStrategy" selected>All substrings</option>
                 <option value="JsSearch.ExactWordIndexStrategy">Exact match</option>
 -                <option value="JsSearch.PrefixIndexStrategy" selected>Prefix matching</option>
 +                <option value="JsSearch.PrefixIndexStrategy">Prefix matching</option>
               </select>
             </li>
         </div>
 -- 
 2.47.0
--- a/modules/nixos/extranix/default.nix
+++ b/modules/nixos/extranix/default.nix
@ -0,0 +1,276 @@
 # SPDX-FileCopyrightText: 2024 Lubin Bailly <lubin.bailly@dgnum.eu>
 #
 # SPDX-License-Identifier: EUPL-1.2
 {
  lib,
  config,
  pkgs,
  ...
 }:
 let
  inherit (lib)
    attrNames
    concatMapStringsSep
    concatStringsSep
    escapeXML
    filter
    getExe
    hasPrefix
    hasSuffix
    head
    importJSON
    mapAttrs'
    mapAttrsToList
    mkDefault
    mkEnableOption
    mkIf
    mkOption
    optionalString
    pathIsDirectory
    removePrefix
    ;
  inherit (lib.strings)
    sanitizeDerivationName
    ;
  inherit (lib.types)
    attrs
    attrsOf
    deferredModule
    listOf
    path
    submodule
    str
    ;
  yaml = pkgs.formats.yaml { };
  json = pkgs.formats.json { };
  cfg = config.services.extranix;
  module-eval =
    module-name: module:
    let
      ignored-eval = lib.evalModules {
        modules = module.ignored-modules;
        inherit (module) specialArgs;
      };
      ignored-opts-doc = pkgs.nixosOptionsDoc { inherit (ignored-eval) options; };
      ignored-opts = importJSON "${ignored-opts-doc.optionsJSON}/share/doc/nixos/options.json";
      eval = lib.evalModules {
        modules = module.paths ++ module.ignored-modules;
        inherit (module) specialArgs;
      };
      opts-doc = pkgs.nixosOptionsDoc { inherit (eval) options; };
      opts = importJSON "${opts-doc.optionsJSON}/share/doc/nixos/options.json";
      filtered-opts = removeAttrs opts (attrNames ignored-opts);
      path-translation =
        let
          translations = map (
            { base, url }:
            {
              url = "${url}${optionalString (!hasSuffix "/" url) "/"}";
              base =
                let
                  base1 = toString base;
                in
                base1 + (optionalString (!hasSuffix "/" base1) "/");
            }
          ) module.path-translations;
        in
        path:
        let
          fullPath = path + (optionalString (pathIsDirectory path) "/default.nix");
          fitting = filter ({ base, ... }: hasPrefix base fullPath) translations;
          translate-info = head (
            fitting
            ++ [
              (throw (
                "${fullPath} is not in any base path of ${module-name}. Base paths are "
                + concatMapStringsSep "\n" ({ base, ... }: base) translations
              ))
            ]
          );
          innerPath = removePrefix translate-info.base fullPath;
        in
        {
          name = "<${innerPath}>";
          url = "${translate-info.url}${innerPath}";
        };
      result' = json.generate "options-extranix-fileDesc.json" {
        last_update = "-/-";
        options = mapAttrsToList (title: val: {
          inherit title;
          inherit (val)
            type
            readOnly
            loc
            ;
          descriptionHTML = pkgs.runCommand "option-${title}.html" { } ''
            ${getExe pkgs.pandoc} -f markdown-raw_html ${pkgs.writeText "option-${title}.md" val.description} > $out
          '';
          description = escapeXML val.description;
          example = escapeXML (val.example.text or "");
          default = escapeXML (val.default.text or "");
          declarations = map path-translation val.declarations;
        }) filtered-opts;
      };
      result =
        pkgs.runCommand "options-extranix.json"
          {
            nativeBuildInputs = [ pkgs.jq ];
          }
          ''
            jq -r '.options[].descriptionHTML | "--rawfile\n" + . + "\n" + .' ${result'} | xargs \
              jq -c '.options |= map(.descriptionHTML as $desc | .descriptionHTML |= $ARGS.named.[$desc])' ${result'} \
              > $out
          '';
    in
    result;
  options-files = mapAttrs' (name: value: {
    name = sanitizeDerivationName name;
    value = module-eval name value;
  }) cfg.modules;
  webroot = pkgs.callPackage ./webroot.nix {
    inherit options-files;
    inherit (cfg) static-data;
    settings = yaml.generate "config.yaml" cfg.settings;
    hugo-theme-extranix-options-search = pkgs.callPackage ./hugo-theme-extranix-options-search.nix { };
  };
 in
 {
  options.services.extranix = {
    enable = mkEnableOption "extranix documentation";
    modules = mkOption {
      type =
        attrsOf (submodule {
          options = {
            specialArgs = mkOption {
              type = attrs;
              default = { };
              description = ''
                Special arguments to give to evalModules.
              '';
            };
            paths = mkOption {
              type = listOf deferredModule;
              description = ''
                Modules to from which to document options.
              '';
            };
            ignored-modules = mkOption {
              type = listOf deferredModule;
              default = [ ];
              description = ''
                Modules required to make modules of `paths` valid.
              '';
              example = ''
                import "''${infra-modulesPath}/module-list.nix"
              '';
            };
            path-translations = mkOption {
              type = listOf (submodule {
                options = {
                  base = mkOption {
                    type = path;
                    description = ''
                      Base path of some module files to be documented.
                    '';
                  };
                  url = mkOption {
                    type = str;
                    description = ''
                      Url root to use for files on this path.
                    '';
                  };
                };
              });
              description = ''
                Rules to convert file paths to urls in the documentation to indicate where
                the option is declared.
              '';
            };
          };
        });
      description = ''
        Sets of modules to be documented separately. The identifier to give for
        `settings.params.release_current_stable` (which is the default module shown) is the key after
        passing through `sanitizeDerivationName`.
      '';
    };
    settings = mkOption {
      inherit (yaml) type;
      description = ''
        Settings for the `config.yaml` for the hugo instantiation.
      '';
      example = {
        baseUrl = "https://example.org/";
        title = "Module documentation";
        languageCode = "en-us";
        params = {
          release_current_stable = "Some-Module";
          logo = "logo.png";
          footer_credits_line = ''
            Based on <a href="https://github.com/mipmip/home-manager-option-search">Home Manager Option Search</a>
          '';
          footer_copyright_line = ''
            Made by catvayor for the <a href="https://dgnum.eu">DGNum</a>.
          '';
          main_menu = [
            {
              name = ''Sources'';
              url = "https://git.example.org/";
            }
          ];
        };
      };
    };
    static-data = mkOption {
      type = path;
      description = ''
        Static files for the website. Should have `images/favicon.png` for favicon.
      '';
    };
    host = mkOption {
      type = str;
      description = ''
        Hostname of the service.
      '';
    };
  };
  config = mkIf cfg.enable {
    services = {
      extranix.settings = {
        theme = "extranix-options-search";
        params = {
          releases = mapAttrsToList (name: _: {
            inherit name;
            value = sanitizeDerivationName name;
          }) cfg.modules;
          release_current_stable = mkDefault (head (attrNames options-files));
        };
      };
      nginx = {
        enable = true;
        virtualHosts.${cfg.host}.locations."/".alias = "${webroot}/";
      };
    };
    assertions = [
      {
        assertion = cfg.modules != { };
        message = ''
          `services.extranix` can't be enabled without any modules to document.
        '';
      }
      {
        assertion = options-files ? ${cfg.settings.params.release_current_stable};
        message = ''
          `services.extranix.settings.params.release_current_stable` should be the
          `sanitizeDerivationName` of a key of `services.extranix.modules`, here one of:
            + ${concatStringsSep "\n  + " (attrNames options-files)}
        '';
      }
    ];
  };
 }
--- a/modules/nixos/extranix/hugo-theme-extranix-options-search.nix
+++ b/modules/nixos/extranix/hugo-theme-extranix-options-search.nix
@ -0,0 +1,75 @@
 # SPDX-FileCopyrightText: 2024 Lubin Bailly <lubin.bailly@dgnum.eu>
 #
 # SPDX-License-Identifier: EUPL-1.2
 {
  fetchFromGitHub,
  stdenv,
  lib,
  fetchurl,
 }:
 stdenv.mkDerivation {
  name = "hugo-theme-extranix-options-search";
  src = fetchFromGitHub {
    owner = "mipmip";
    repo = "hugo-theme-extranix-options-search";
    rev = "3252b5bd98adcbbe629327d72c8416c25014a0d6";
    hash = "sha256-XV7Js1KaBiWv9qao8iyzQ546nT1KkwCtvyAs++oeXFo=";
  };
  patches = [
    ./0001-revert-don-t-parse-md-in-js.patch
    ./0002-chore-remove-useless-dependencies.patch
    ./0003-feat-separate-HTML-description-of-MD-description.patch
    ./0004-fix-indentation-of-ul.patch
    ./0005-feat-match-all-substring-by-default.patch
  ];
  installPhase =
    let
      js-search = fetchurl {
        url = "https://unpkg.com/js-search@2.0.1/dist/umd/js-search.min.js";
        hash = "sha256-LD9UsSATk+xTzAbk8nD2gA2bjHKvetXtCMDAFkM2K5Q=";
      };
      jquery = fetchurl {
        url = "https://code.jquery.com/jquery-3.7.1.slim.min.js";
        hash = "sha256-kmHvs0B+OpCW5GVHUNjv9rOmY0IvSIRcf7zGUDTDQM8=";
      };
      bootstrap.css.main = fetchurl {
        url = "https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css";
        hash = "sha256-916EbMg70RQy9LHiGkXzG8hSg9EdNy97GazNG/aiY1w=";
      };
      bootstrap.css.theme = fetchurl {
        url = "https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap-theme.min.css";
        hash = "sha256-ZT4HPpdCOt2lvDkXokHuhJfdOKSPFLzeAJik5U/Q+l4=";
      };
      bootstrap.js = fetchurl {
        url = "https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js";
        hash = "sha256-U5ZEeKfGNOja007MMD3YBI0A3OSZOQbeG6z2f2Y0hu8=";
      };
    in
    ''
      mkdir $out
      rm static/images/favicon.*
      cp -r * $out
      cp ${js-search} $out/static/js/js-search.min.js
      cp ${jquery} $out/static/js/jquery.slim.min.js
      cp ${bootstrap.css.main} $out/static/css/bootstrap.min.css
      cp ${bootstrap.css.theme} $out/static/css/bootstrap-theme.min.css
      cp ${bootstrap.js} $out/static/js/bootstrap.min.js
      substituteInPlace $out/layouts/index.html \
        --replace-fail 'https://unpkg.com/js-search@2.0.1/dist/umd/js-search.min.js' js/js-search.min.js \
        --replace-fail 'https://ajax.googleapis.com/ajax/libs/jquery/1.12.4/jquery.min.js' js/jquery.slim.min.js \
        --replace-fail 'https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap.min.css' css/bootstrap.min.css \
        --replace-fail 'https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/css/bootstrap-theme.min.css' css/bootstrap-theme.min.css \
        --replace-fail 'https://maxcdn.bootstrapcdn.com/bootstrap/3.3.7/js/bootstrap.min.js' js/bootstrap.min.js \
    '';
  meta = {
    description = "Theme which implements a nix modules options search machine.";
    homepage = "https://github.com/mipmip/hugo-theme-extranix-options-search";
    license = lib.licenses.asl20;
    maintainers = [ ];
  };
 }
--- a/modules/nixos/extranix/webroot.nix
+++ b/modules/nixos/extranix/webroot.nix
@ -0,0 +1,25 @@
 # SPDX-FileCopyrightText: 2024 Lubin Bailly <lubin.bailly@dgnum.eu>
 #
 # SPDX-License-Identifier: EUPL-1.2
 {
  hugo,
  hugo-theme-extranix-options-search,
  options-files,
  settings,
  static-data,
  lib,
  runCommand,
 }:
 runCommand "nix-doc-webroot" { } ''
  mkdir themes
  ln -s ${hugo-theme-extranix-options-search} themes/extranix-options-search
  cp -rs ${static-data} static
  chmod -R u+w static
  mkdir static/data
  ${lib.concatStringsSep "\n" (
    lib.mapAttrsToList (name: file: "ln -s ${file} static/data/options-${name}.json") options-files
  )}
  ln -s ${settings} config.yaml
  ${lib.getExe hugo} --noBuildLock -d $out
 ''
--- a/npins/sources.json
+++ b/npins/sources.json
@ -225,35 +225,21 @@
      "pre_releases": false,
      "version_upper_bound": null,
      "release_prefix": null,
-      "version": "v0.2.2",
+      "version": "v0.2.3",
-      "revision": "b9cb5d6f945d1e3fd7b70d63848c70335e9912e8",
+      "revision": "3c07af3887626062cf9d25967998c582c1b2d9df",
      "url": null,
-      "hash": "0m6bw5qlrchsigx7x4nz3xkcn3dnr14k5j0ws9lbggnldnz9qg2w"
+      "hash": "135g3sjx885vp880ijnfjmrc7krkr85c1xxxqkdy5qagr454k1jv"
    },
    "nix-modules": {
      "type": "Git",
      "repository": {
        "type": "Git",
-        "url": "https://git.hubrecht.ovh/hubrecht/nix-modules.git"
+        "url": "https://git.hubrecht.ovh/hubrecht/nix-modules"
      },
-      "branch": "main",
+      "branch": "dgnum",
-      "revision": "75e8d70a051dd19d126b5248b62f61d6f8ce4361",
+      "revision": "f3bfda88cf5ca652baa8577da491f9427d98fe5e",
      "url": null,
-      "hash": "0yx5by3v2cshiidyh27n75lcqy9d1kk5zz5mchmfv63s9p0cjzqn"
+      "hash": "1jh8wqlz1bv3b5crfhyvqnh4gjjsyzvs3q0iys6iwq0l337ddgvx"
    },
    "nix-patches": {
      "type": "GitRelease",
      "repository": {
        "type": "Git",
        "url": "https://git.hubrecht.ovh/hubrecht/nix-patches"
      },
      "pre_releases": false,
      "version_upper_bound": null,
      "release_prefix": null,
      "version": "v0.5.0",
      "revision": "e11ba20945f4a867f09d84343c37328288f274b4",
      "url": null,
      "hash": "1c6cc44pwlg3ky6cnwhkml8ci77fw3sgjhwvqg0f6igxxf2fqv9v"
    },
    "nix-pkgs": {
      "type": "Git",
@ -261,10 +247,10 @@
        "type": "Git",
        "url": "https://git.hubrecht.ovh/hubrecht/nix-pkgs"
      },
-      "branch": "main",
+      "branch": "dgnum",
-      "revision": "cc01e1c2a6ecb1e38fde35ee54995a6a639fb057",
+      "revision": "304abd514dfe07bce4b368b1f384bfd598d61183",
      "url": null,
-      "hash": "17a9vlwrk9365ccyl7a5xspqsn9wizcpwdpvr3qdimvq4fpwhjal"
+      "hash": null
    },
    "nix-reuse": {
      "type": "GitRelease",
@ -346,9 +332,9 @@
        "url": "https://git.dgnum.eu/mdebray/stateless-uptime-kuma"
      },
      "branch": "master",
-      "revision": "880f444ff7862d6127b051cf1a993ad1585b1652",
+      "revision": "d378d1ce00c676fa22ef0808cf73f3e1c34e0191",
      "url": null,
-      "hash": "166057469hhxnyqbpd7jjlccdmigzch51616n1d5r617xg0y1mwp"
+      "hash": "00k5i3n1g869g4070ryfdwqnk3k78fan1s8pqmnbq2m7m29hmb8f"
    },
    "wp4nix": {
      "type": "Git",
@ -364,4 +350,4 @@
    }
  },
  "version": 3
-}
+}
--- a/scripts/cache-node.sh
+++ b/scripts/cache-node.sh
@ -35,23 +35,4 @@ esac
 drv=$(colmena eval --instantiate -E "{ nodes, ... }: nodes.${BUILD_NODE}.${toplevel_path}" --show-trace)
 # Build the derivation and send it to the great beyond
-nix-store --query --requisites --force-realise --include-outputs "$drv" | grep -v '.*\.drv' >paths.txt
+push-to-cache "$(nix-store --realise "$drv")"
 if [ "$STORE_PASSWORD" == "" ]; then
  echo "No password given for the remote cache, uploading cannot take place."
  exit 0
 fi
 cat <<EOF >.netrc
 default
 login $STORE_USER
 password $STORE_PASSWORD
 EOF
 nix copy \
  --extra-experimental-features nix-command \
  --to "$STORE_ENDPOINT?compression=none" \
  --netrc-file .netrc \
  "$(nix-store --realise "$drv")"
 rm .netrc
--- a/scripts/default.nix
+++ b/scripts/default.nix
@ -20,7 +20,12 @@ let
    ;
  scripts = {
-    cache-node = [ colmena ];
+    cache-node = [
      colmena
      self.push-to-cache
    ];
    push-to-cache = [ ];
    nix-build-and-cache = [ self.push-to-cache ];
    check-deployment = [
      colmena
      jq
@ -29,13 +34,14 @@ let
    launch-vm = [ colmena ];
    list-nodes = [ jq ];
  };
  self = mapAttrs (
    name: runtimeInputs:
    writeShellApplication {
      inherit name runtimeInputs;
      text = builtins.readFile ./${name}.sh;
    }
  ) scripts;
 in
-
+self
 mapAttrs (
  name: runtimeInputs:
  writeShellApplication {
    inherit name runtimeInputs;
    text = builtins.readFile ./${name}.sh;
  }
 ) scripts
--- a/scripts/nix-build-and-cache.sh
+++ b/scripts/nix-build-and-cache.sh
@ -0,0 +1,5 @@
 # SPDX-FileCopyrightText: 2024 Maurice Debray <maurice@dgnum.eu>
 #
 # SPDX-License-Identifier: EUPL-1.2
 push-to-cache "$(nix-build "$@")"
--- a/workflows/eval-nodes.nix
+++ b/workflows/eval-nodes.nix
@ -2,7 +2,7 @@
 #
 # SPDX-License-Identifier: EUPL-1.2
-{ lib }:
+{ lib, nix-actions }:
 let
  inherit (lib) attrNames genAttrs;
@ -27,7 +27,7 @@ in
        env = {
          STORE_ENDPOINT = "https://tvix-store.dgnum.eu/infra-signing/";
          STORE_USER = "admin";
-          STORE_PASSWORD = "\${{ secrets.STORE_PASSWORD }}";
+          STORE_PASSWORD = nix-actions.lib.secret "STORE_PASSWORD";
          BUILD_NODE = node;
        };
      }
--- a/workflows/eval-shell.nix
+++ b/workflows/eval-shell.nix
@ -0,0 +1,31 @@
 # SPDX-FileCopyrightText: 2024 Tom Hubrecht <tom.hubrecht@dgnum.eu>
 #
 # SPDX-License-Identifier: EUPL-1.2
 { nix-actions, ... }:
 {
  name = "Build the shell";
  on = {
    pull_request.branches = [ "main" ];
    push.branches = [ "main" ];
  };
  jobs = {
    build-shell = {
      runs-on = "nix";
      steps = [
        { uses = "actions/checkout@v3"; }
        {
          name = "Build and cache shell";
          run = ''nix-shell -A eval-shell --run "nix-build-and-cache -A devShell"'';
          env = {
            STORE_ENDPOINT = "https://tvix-store.dgnum.eu/infra-signing/";
            STORE_USER = "admin";
            STORE_PASSWORD = nix-actions.lib.secret "STORE_PASSWORD";
          };
        }
      ];
    };
  };
 }
--- a/workflows/npins-update.nix
+++ b/workflows/npins-update.nix
@ -2,59 +2,92 @@
 #
 # SPDX-License-Identifier: EUPL-1.2
 { lib, nix-actions, ... }:
 let
  inherit (nix-actions.lib) secret;
  inherit (lib) genAttrs mapAttrs' nameValuePair;
  dependencies = builtins.attrNames (import ../npins);
 in
 {
-  name = "npins update";
+  name = "Update dependencies";
  on.schedule = [
-    # Run at 11 o'clock every wednesday
+    # Run every saturday
-    { cron = "25 15 * * *"; }
+    { cron = "5 16 * * 6"; }
  ];
-  jobs.npins_update = {
+  # Global environment, necessary for rebases and commits
-    runs-on = "nix";
+  env = rec {
-    steps = [
+    GIT_AUTHOR_NAME = "HT Chores";
-      {
+    GIT_AUTHOR_EMAIL = "chores@mail.hubrecht.ovh";
-        uses = "actions/checkout@v3";
+    GIT_COMMITTER_NAME = GIT_AUTHOR_NAME;
-        "with" = {
+    GIT_COMMITTER_EMAIL = GIT_AUTHOR_EMAIL;
          depth = 0;
          token = "\${{ secrets.TEA_DGNUM_CHORES_TOKEN }}";
        };
      }
      {
        name = "Update dependencies and open PR if necessary";
        run = ''
          npins update
          if [ ! -z "$(git diff --name-only)" ]; then
            echo "[+] Changes detected, pushing updates."
            git switch -C npins-update
            git add npins
            git config user.name "DGNum Chores"
            git config user.email "tech@dgnum.eu"
            git commit --message "chore(npins): Update"
            git push --set-upstream origin npins-update --force
            # Connect to the server with the cli
            tea login add \
              -n dgnum-chores \
              -t "''${{ secrets.TEA_DGNUM_CHORES_TOKEN }}" \
              -u https://git.dgnum.eu
            # Create a pull request if needed
            # i.e. no PR with the same title exists
            if [ -z "$(tea pr ls -f='title,author' -o simple | grep 'chore(npins): Update dgnum-chores')" ]; then
              tea pr create \
                --description "Automatic npins update" \
                --title "chore(npins): Update" \
                --head npins-update
            fi
          fi
        '';
      }
    ];
  };
  jobs = mapAttrs' (name: nameValuePair (builtins.replaceStrings [ "." ] [ "_" ] name)) (
    genAttrs dependencies (name: {
      runs-on = "nix";
      steps = [
        (nix-actions.steps.checkout {
          fetch-depth = 0;
          token = secret "TEA_DGNUM_CHORES_TOKEN";
        })
        {
          env.GIT_UPDATE_BRANCH = "npins-updates/${name}";
          name = "Switch to a new branch";
          run = # bash
            ''
              if git ls-remote --exit-code --heads origin "refs/heads/$GIT_UPDATE_BRANCH"; then
                git switch "$GIT_UPDATE_BRANCH"
                git rebase main
                echo "EXISTING_BRANCH=1" >> $GITHUB_ENV
              else
                git switch -C "$GIT_UPDATE_BRANCH"
              fi
            '';
        }
        {
          env = {
            GIT_UPDATE_BRANCH = "npins-updates/${name}";
            COMMIT_MESSAGE = "chore(npins): Update ${name}";
          };
          name = "Open a PR if updates are present";
          run = # bash
            ''
              npins update ${name}
              if [ ! -z "$(git diff --name-only)" ]; then
                echo "[+] Changes detected, pushing updates."
                git add npins
                if [ -n "$EXISTING_BRANCH" ]; then
                  git commit --amend --no-edit
                  git push --force
                else
                  git commit --message "$COMMIT_MESSAGE"
                  git push -u origin "$GIT_UPDATE_BRANCH"
                fi
                # Connect to the server with the cli
                tea login add -n dgnum-chores -t "${secret "TEA_DGNUM_CHORES_TOKEN"}" -u https://git.dgnum.eu
                # Create a pull request if needed
                # i.e. no PR with the same title exists
                if [ -z $(tea pr ls -f='title,author' -o simple | grep "$COMMIT_MESSAGE dgnum-chores") ]; then
                  tea pr create --description "Automatic npins update" --title "$COMMIT_MESSAGE" --head "$GIT_UPDATE_BRANCH"
                fi
              fi
            '';
        }
      ];
    })
  );
 }