Wireless access point daemon, patched with ubus support
Find a file
Balamurugan Mahalingam 1b96745f1d Add a new QCA vendor attribute to set interface offload type
Userspace tools can use QCA_WLAN_VENDOR_ATTR_CONFIG_IF_OFFLOAD_TYPE to
configure the different below acceleration features (hardware, software)
on a per interface basis.

0 - No acceleration Packets are processed through the Linux kernel
networking stack.

1 - Software based acceleration: Packets are processed through the
shortcut forwarding engine (SFE) to bypass the Linux networking stack
for improved throughput performance. This option is applicable for AP,
STA, and Mesh mode and available for all radio designs. From the
performance aspect, this option consumes more CPU compared to the other
two options. Linux traffic control can be further applied with this
option to have more control on the traffic flows.

2 - Hybrid acceleration (software and hardware acceleration combined):
Packets are processed through both hardware and software in this case.
Packet classification is done by the hardware and then the packets are
delivered to software along with classification results as meta data.
Software can choose to do more classification/QoS based on use cases.
This is applicable for AP, STA, and Mesh modes and is available for all
radio designs. From the performance aspect, this option consumes
relatively less CPU compared to the SFE option above. Linux traffic
control rules cannot be applied with this option.

3 - Hardware based acceleration : Packets are processed through special
hardware (Direct Switch) rings which can directly forward the packets
between ethernet hardware and Wi-Fi hardware with very less software
involvement. This is applicable only for AP and STA modes; not
applicable for Mesh mode. From the performance aspect, this option
consumes very much less CPU compared to the other options. Linux traffic
control rules cannot be applied when this option is used. This option is
applicable only for specific radio designs. When this option is not
available, the default option (SFE) would be configured.

Signed-off-by: Balamurugan Mahalingam <quic_bmahalin@quicinc.com>
2024-06-07 16:21:54 +03:00
doc DBus: Add ANQP fields to BSS properties 2024-03-09 17:59:22 +02:00
eap_example build: Put archive files into build/ folder too 2020-10-11 11:16:00 +03:00
hostapd WNM: AP configuration to allow BSS max idle period requests 2024-05-29 23:40:22 +03:00
hs20 EST: Write the RSA private key using the standard PRIVATE KEY format 2023-02-23 16:44:38 +02:00
radius_example build: Put archive files into build/ folder too 2020-10-11 11:16:00 +03:00
src Add a new QCA vendor attribute to set interface offload type 2024-06-07 16:21:54 +03:00
tests tests: WNM BSS max idle period management 2024-05-29 23:46:02 +03:00
wlantest Use a single define MAX_NUM_MLD_LINKS for the maximum number of links 2024-03-02 11:25:20 +02:00
wpa_supplicant WNM: Include BSS max idle period in STATUS command output 2024-05-29 23:40:22 +03:00
wpadebug wpadebug: Allow WebView to parse and load clear text (HTTP) 2019-06-20 00:33:43 +03:00
wpaspy wpaspy: Do not mark not-existing UNIX domain socket as UDP 2021-03-01 12:51:20 +02:00
.gitignore gitignore: Remove obsolete mac80211_hwsim entry 2020-10-11 19:36:18 +03:00
Android.mk Android: Compile hs20-osu-client to /vendor/bin in test builds 2022-04-14 17:10:03 +03:00
build_release Drop OpenSSL 0.9.8 patches to add EAP-FAST support 2016-01-13 00:17:27 +02:00
CONTRIBUTIONS The main branch is now used for v2.11 development 2022-01-17 00:03:42 +02:00
COPYING Update copyright notices for the new year 2022 2022-01-16 22:51:29 +02:00
README Update copyright notices for the new year 2022 2022-01-16 22:51:29 +02:00

wpa_supplicant and hostapd
--------------------------

Copyright (c) 2002-2022, Jouni Malinen <j@w1.fi> and contributors
All Rights Reserved.

These programs are licensed under the BSD license (the one with
advertisement clause removed).

If you are submitting changes to the project, please see CONTRIBUTIONS
file for more instructions.


This package may include either wpa_supplicant, hostapd, or both. See
README file respective subdirectories (wpa_supplicant/README or
hostapd/README) for more details.

Source code files were moved around in v0.6.x releases and compared to
earlier releases, the programs are now built by first going to a
subdirectory (wpa_supplicant or hostapd) and creating build
configuration (.config) and running 'make' there (for Linux/BSD/cygwin
builds).


License
-------

This software may be distributed, used, and modified under the terms of
BSD license:

Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are
met:

1. Redistributions of source code must retain the above copyright
   notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright
   notice, this list of conditions and the following disclaimer in the
   documentation and/or other materials provided with the distribution.

3. Neither the name(s) of the above-listed copyright holder(s) nor the
   names of its contributors may be used to endorse or promote products
   derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.