Commit graph

6408 commits

Author SHA1 Message Date
Michael Schaller
bdec7ee5c9 D-Bus: Add support to set pkcs11_{engine,module}_path
Add SetPKCS11EngineAndModulePath D-Bus method. Add PKCS11EnginePath
and PKCS11ModulePath D-Bus property getters.

Signed-hostap: Michael Schaller <misch@google.com>
2013-11-23 10:48:27 +02:00
Janusz Dziedzic
80ed037f00 Clear beacon_data before usage
struct beacon_data contains a lot of pointers. Make sure it gets cleared
to zero if hostapd_build_beacon_data() gets called from a path that does
not clear the structure first.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-11-22 23:21:43 +02:00
Dmitry Shmidt
982189632f Android: Revert static field back to send_and_recv_msgs()
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-22 23:12:40 +02:00
Dmitry Shmidt
3c2e82f101 Android: wpa_supplicant: Use Ver 0.8.X as default
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-22 20:42:00 +02:00
Dmitry Shmidt
a94737ea38 Android: P2P: Remember country locale
This updates P2P modules based on the Android specific
DRIVER COUNTRY command.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-22 20:23:16 +02:00
Jouni Malinen
5e2c3490d5 Android: Add driver_cmd for arbitrary driver commands
This is a mechanism used in Android to extend driver interface in vendor
specific ways. This is included only for the purpose of Android
compatibility. Proper interface commands should be used for any new
functionality.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-22 20:23:08 +02:00
Jouni Malinen
0de3803610 Android: Add P2P/WPS wrappers for private lib
Android uses a vendor specific library for implementing couple of driver
interface functions. Add the wrapper code to allow that mechanism to be
used.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-22 20:23:03 +02:00
Dmitry Shmidt
7b74c0acfb Android: Clean entire socket directory
Despite interface (and group) related sockets are not used
for control, they are created and may be left.

Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2013-11-22 18:03:24 +02:00
Marek Kwaczynski
92ecda40e0 hostapd: Set proper VHT capabilities
Set VHT capabilities defined in config file instead only supported
by the driver.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2013-11-22 18:03:04 +02:00
Marek Kwaczynski
77a3e796e1 hostapd: Fix set beacon in multiple BSSID scenario
Check if the BSS interface has started before setting beacon.
Lack of this condition can cause segmantation fault.

Signed-hostap: Marek Kwaczynski <marek.kwaczynski@tieto.com>
2013-11-22 18:02:56 +02:00
Sunil Dutt
179fc5527d TDLS: Do not reenable TDLS link on retransmitted setup frame
A reenable of the TDLS link while the host driver is already processing
the same (due to the retransmitted M2/M3 frames) might result in a
failed TDLS setup handshake due to some host driver's implementation.
Thus, issue enable link only when the peer's TDLS status signifies no
prior link (tpk_success=0).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-22 17:47:09 +02:00
Jouni Malinen
cc14091eab VHT: Fix memory leak in STA entry
Commit de3cdf354a adding copying of the
STA's VHT capabilities into the STA entry on the AP. This was done in
allocated memory, but that new memory allocation was not freed anywhere.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-22 17:46:22 +02:00
Jouni Malinen
01370f49a6 tests: Verify that re-invoked P2P group is identified as persistent
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-21 11:39:12 +02:00
Johannes Berg
594516b4c2 Use monotonic clock for relative time for eloop if available
Relative time shouldn't be calculated based on gettimeofday
because that clock can jump (e.g., when the time is adjusted
by the system administrator.)

On systems where that is available, use CLOCK_BOOTTIME (on
fairly recent Linux systems, this clock takes into account
the time spend suspended) or CLOCK_MONOTONIC (on Linux and
some POSIX systems, this clock is just freely running with
no adjustments.)

Reported-by: Holger Schurig <holgerschurig@gmail.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-11-20 23:52:56 +02:00
Jouni Malinen
461e3ebe43 Fix and work around some MinGW compilation issues
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 23:12:33 +02:00
Jouni Malinen
81cbc046fe Fix compiler warning for OpenSSL without HAVE_OCSP
Commit 080585c01a added ssl_ctx outside
ifdef HAVE_OCSP block that was the only user for this.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 23:12:33 +02:00
Michal Kazior
68d628accd hostapd: Fix interface enabling/disabling and DFS
The 'started' state was tracked incorrectly. It also broke DFS
as it was using hostapd_enable/disable_iface() functions.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-11-20 22:29:35 +02:00
Jithu Jance
1cba9bea96 STA: Cancel sched_scan while initiating wps_reassoc
Scan initiated from wps_nfc command context was ketp on
getting rescheduled due to an on-going scheduled scan. So
cancel sched_scan before issuing a reassociation scan.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-11-20 22:28:28 +02:00
Jouni Malinen
215a02f359 Add Wi-Fi Direct to the build configuration example
In addition, include Wi-Fi Direct support for Android builds by
default.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 20:49:48 +02:00
Paul Stewart
ca9c14fb0a dbus_new: Add documentation for D-Bus TDLS methods
Signed-hostap: Paul Stewart <pstew@chromium.org>
2013-11-20 16:39:34 +02:00
Johannes Berg
8c30ab492c hwsim tests: Check kernel messages for lockdep complaints
Lockdep complaints are never good, so check for them in the
kernel messages, not just for warnings and bugs.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-11-20 16:39:24 +02:00
Rashmi Ramanna
6fc48481e4 P2P: Short scan wait to speed up the group re-invocation
The shorter 250 ms wait for the next scan request can be used also for
the case of persistent group re-invocation instead of just formation of
a new group. This speeds up the process and makes this more robust
especially in cases where the GO is using MCC.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 16:35:30 +02:00
Jouni Malinen
93a06fe103 Fix QoS Map Configure frame use
The QoS Map Set element was passed in full to the driver instead of just
the payload of the element. This resulted in the updated QoS Map being
rejected. Validate the element id/len and send only the payload to the
driver.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-20 12:49:27 +02:00
Jouni Malinen
0004374025 P2P: Prefer U-NII-3 over U-NII-1 during channel selection
Some devices disable use of U-NII-1 (channels 36-48) for P2P due to it
being indoor use only in number of locations. If U-NII-3 (channels
149-161) is available, try to pick a channel from that range first
during random channel selection to reduce likelihood of interoperability
issues.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-19 13:04:21 +02:00
Jouni Malinen
1b665cbf51 P2P: Fix channel preference use for MCC p2p_connect
Only force_freq was used in the wpas_p2p_set_own_freq_preference() call
which allowed the P2P module channel re-selection to ignore the
preference for using a channel we are already using. Fix this by setting
either force_freq or pref_freq as the preference based on which one is
set. This allows p2p_ignore_shared_freq parameter to be used whether to
prefer the shared frequency in this case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-19 12:39:29 +02:00
Jouni Malinen
5624ccfe93 P2P: Optimize default case for own freq preference setting
There is no need to use wpas_p2p_num_unused_channels() here in the
default configuration of p2p_ignore_sahred_freq=0, so re-order the
conditions to skip that operation. This is a bit more efficient and the
debug log is also a bit cleaner in the default case.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-19 12:29:25 +02:00
Jouni Malinen
d0f61a4bea P2P: Fix p2p_ignore_shared_freq=1 when inviting a peer
p2p_ignore_shared_freq=1 was supposed to allow a MCC-capable device to
ignore a preference for using the same channel on multiple interfaces.
However, it was not used when inviting a peer to re-invoke a persistent
group. This case needs special handling since the peer's channel list is
not available to perform channel reselection and the operating channel
indicated in the Invitation Request frames ends up getting used as the
operating channel if the transmitted of that frames becomes the GO.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-19 12:26:16 +02:00
Jouni Malinen
21e491f2f6 P2P: Fix p2p_ignore_shared_freq=1 during invitation processing
p2p_ignore_shared_freq=1 was supposed to allow a MCC-capable device to
ignore a preference for using the same channel on multiple interfaces.
However, it was not used during processing of an Invitation Request. Fix
that case to use channel preference instead of channel forcing if free
channels are available. This allows p2p_ignore_shared_freq=1 case to
ignore the preference.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-19 12:15:45 +02:00
Jouni Malinen
107a89448c P2P: Clean up wpas_p2p_setup_freqs() debug message
It is confusing to talk about current operating channels being
unavailable for P2P when there are no current operating channels. Make
the debug message easier to understand.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 18:16:27 +02:00
Jouni Malinen
7d669cf7a1 P2P: Clean up wpas_p2p_init_go_params()
It is clearer if there is only a single loop of the channel list and
shared debug prints. In addition, the note about current operating
channels not being available is quite confusing if there are no
operating group, so make that part of the message conditional.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 18:13:15 +02:00
Jouni Malinen
384bdd021b P2P: Prefer VHT channels for initial pick
If there are no other preferences from local configuration or driver,
prefer a random VHT channel instead of falling back to the fixed
pre-configured channel or 5 GHz/HT40 channel preference.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 17:58:14 +02:00
Jouni Malinen
a30d50b324 P2P: Prefer HT40 channels for initial pick
If there are no other preferences from local configuration or driver,
prefer a random HT40 channel instead of falling back to the fixed
pre-configured channel or 5 GHz channel preference.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 17:57:07 +02:00
Jouni Malinen
f24071076d P2P: Prefer 5 GHz channels for initial pick
If there are no other preferences from local configuration or driver,
prefer a random 5 GHz channel instead of falling back to the fixed
pre-configured channel (which is selected by default to be 1, 6, or 11).

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 17:55:04 +02:00
Jouni Malinen
b2d4aaa2c7 P2P: Select VHT channel at random instead of using the first entry
Use the new p2p_channel_select() function to select a VHT channel
at random when no other preferences are in effect.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 17:51:27 +02:00
Jouni Malinen
ee8f6ea0ca P2P: Select HT40 channel at random instead of using the first entry
Use the new p2p_channel_select() function to select an HT40 channel
at random when no other preferences are in effect.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 17:50:55 +02:00
Jouni Malinen
5576663fba P2P: Move random channel selection into a helper function
The new p2p_channel_select() function can be re-used to implement
random channel selection from a set of operating classes in all
places that need such functonality.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 17:50:21 +02:00
Jouni Malinen
b17d89bd10 P2P: Fix channel selection for MCC case
Commit 0d08efa447 modified
wpas_p2p_setup_freqs() design to use number of MCC channels capability
from the driver. However, it resulted in regression on how the preferred
vs. forced channel selection is done in the case of a MCC device.
force_freq was set unconditionally even though this was supposed to be
done only if no additional channels are available. pref_freq needs to be
used when possible to avoid preventing connection.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2013-11-18 16:53:44 +02:00
Jithu Jance
f86d282f43 Handle legacy scan interruption of sched_scan/PNO
While starting from PNO start context, the scheduled scan was not
setting the flag wpa_s->scanning. This was resulting in the subsequent
SCAN command to proceed further and send command to nl80211/cfg80211.
The expected behavior of cancelling sched_scan was not happening here.

While sched_scan is in progress and a legacy scan comes on the
cli/socket, the sched_scan is cancelled and normal scan is allowed to
continue. However, sometimes sched_scan cancelled event comes a bit
delayed and we will send out the scan command before the wpa_s->scanning
is cleared. Instead, reschedule the incoming scan req if the
wpa_s->scanning shows that it is still in progress.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2013-11-18 14:35:48 +02:00
Jouni Malinen
c41e1d7cac wlantest: Add more pcapng notes on EAPOL processing
Some of the MIC validation steps were not logged in the pcapng notes.
Add these to make the entries more consistent and to provide more
information to ease debugging.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 23:43:11 +02:00
Jouni Malinen
a0530dff5b wlantest: Allow additional PTKs to be specified from a file
A text file with a hexdump of PTK (KCK|KEK=TK with 48 octets for CCMP or
64 octets for TKIP or alternative 16 or 32 octet TK for CCMP/TKIP) can
now be read from a file specified with the -T command line argument. If
the current known PTK fails to decrypt a frame (or if no current PTK is
known) all listed PTKs are iterated to see if any of them matches.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 23:09:38 +02:00
Jouni Malinen
848bb8dea9 tests: Use per-test case log/capture file from wlantest
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:47:06 +02:00
Jouni Malinen
de8bb171f6 wlantest: Add support for debug log timestamps
The new command line argument -t can now be used to request wlantest to
include a timestamp in the log entries.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:45:32 +02:00
Jouni Malinen
d33fef57a4 wlantest: Add support for log output into a file
This allows wlantest debug log output to be directed to a file so that
RELOG command can be used to rotate files more easily than stdout.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:40:17 +02:00
Jouni Malinen
c99a721e5b wlantest: Add RELOG command to reopen log/capture files
This can be used similarly to the wpa_supplicant RELOG command to
rotate log and capture files.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 21:39:22 +02:00
Jouni Malinen
0e91337d54 Validate P802.11ac test vector result
Verify the expected value against P802.11ac/D7.0 CCMP-256, GCMP-256,
BIP-GMAC-128, and BIP-GMAC-256 test vectors.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 20:55:38 +02:00
Jouni Malinen
84a65fd6a3 Extend GCMP test vectors to include both MPDUs
IEEE Std 802.11ad-2012 includes two test vectors for GCMP. Verify both
of those and also verify that the results match the values in the
standard instead of just verifying that decrypted frame matches
original.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 20:34:01 +02:00
Jouni Malinen
393e90191e tests: Verify GO channel switch behavior
Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-17 17:46:23 +02:00
Andrei Otcheretianski
334bf36ac5 Add chan_switch to ctrl interface of wpa_supplicant and hostapd
Add chan_switch to the control interface of wpa_supplicant and hostapd,
and also to wpa_cli and hostapd_cli.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:58 +02:00
Andrei Otcheretianski
bf281c129f Add AP channel switch mechanism
Build CSA settings and call the driver to perform the switch. Construct
Beacon, Probe Response, and (Re)Association Response frames both for CSA
period and for the new channel. These frames are built based on the
current configuration. Add CSA IE in Beacon and Probe Response frames.

Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:58 +02:00
Andrei Otcheretianski
e44a384b68 Move AP parameter filling into a helper function
Signed-hostap: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
2013-11-17 17:12:58 +02:00