Commit graph

69 commits

Author SHA1 Message Date
Michal Kazior
b72f949b07 DFS: Allow skipping radar channels
This is needed for AP CSA. Since CSA must happen immediately after radar
is detected there's no time to perform CAC. Thus, radar channels must be
disabled when looking for a new channel to escape to after a radar is
detected.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-12-07 20:50:15 -08:00
Jouni Malinen
bb337ddac2 DFS: Do not use cf1 to override freq for 20 MHz channels
NL80211_ATTR_CENTER_FREQ1 is defined to be used for anything but 20 MHz
bandwidth, so it could be unset for 20 MHz channels. Do not use it to
override center frequency from NL80211_ATTR_WIPHY_FREQ (if available)
for 20 MHz channels to avoid clearing frequency.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 21:50:48 +02:00
Jouni Malinen
dc036d9ee0 DFS: Convert hostapd_data use to hostapd_iface
DFS operations are specific to the interface (radio/wiphy), not BSS
(netdev/vif), so hostapd_iface is the appropriate element to use in
them.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
e1c5faf007 hostapd: Track interface state
The new hostapd_iface::state enum is used to track the current state of
the hostapd interface (a radio/wiphy).

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 19:51:06 +02:00
Jouni Malinen
186c905912 DFS: Add control interface events for various DFS events
These can be useful for external programs that track the current state
of the AP.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-03 11:31:48 +02:00
Michal Kazior
813d4bac5a DFS: Add support for multi-BSS
If radar was detected single BSS is notified about it. This caused only
that single BSS to be stopped and restarted. However, due to nl80211
interface combinations the BSS was not started on a new channel and
other BSSes remained operating on the old channel.

The downside is that hostapd_disable_iface() causes deauth frames to be
sent. This is undesired but on the other hand it doesn't make sense to
create workarounds that imitate CSA's 'block tx'. For proper Tx
quiescing CSA should be properly implemented.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2013-10-31 15:12:17 +02:00
Michal Kazior
954e71d270 DFS: Reset cac_started properly
If CAC was stopped but hostapd was not terminated cac_started would
remain set to 1.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2013-10-31 14:49:38 +02:00
Michal Kazior
6a398ddc9a DFS: Sanitize channel availability checks
Fixes corner case of holes in channel list and simplifies availability
checks.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-10-31 14:49:06 +02:00
Michal Kazior
32595da608 DFS: Fix HT40/VHT calculation
Decouple HT/VHT offset/center-freq calculations from channel lookup.
This will be necessary for further improvements on the DFS codebase.

Signed-hostap: Michal Kazior <michal.kazior@tieto.com>
2013-10-31 14:49:03 +02:00
Jouni Malinen
e7ecab4a3b Use ARRAY_SIZE() macro
Replace the common sizeof(a)/sizeof(a[0]) constructions with a more
readable version.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 17:49:05 +03:00
Janusz Dziedzic
2e946249b1 DFS: Handle radar event when CAC actived correctly
When we have CAC active and receive a radar event, we should ignore
CAC_ABORT event and handle channel switch in the radar event handler.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-26 17:48:55 +03:00
Janusz Dziedzic
5eaf240af5 DFS: Fix overlapped() function to check only DFS channels
This fixes a problem when operating on non-DFS channel and receiving a
radar event for that channel. Previously, we would have decided to
switch channels.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-26 17:48:46 +03:00
Janusz Dziedzic
345276a6b5 DFS: Adjust center freq correctly for VHT20/VHT40
Setup correct seg0 for VHT with 20/40 MHz width (VHT_CHANWIDTH_USE_HT).

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-26 17:48:41 +03:00
Janusz Dziedzic
1dc17db34a DFS: Fix available channels list for VHT80
Add a table of available VHT80 channels. This table contains the first
available channel. We will also choose this first channel as the control
one.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-26 17:48:36 +03:00
Jouni Malinen
35f836375d DFS: Add forgotten break statement
The VHT_CHANWIDTH_160MHZ case fell through to the default case and
printed out a debug message that was not supposed to be shown here.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-10-26 15:55:09 +03:00
Janusz Dziedzic
899cc14e10 hostapd: Add support for DFS with 160 MHz channel width
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:06:16 +03:00
Janusz Dziedzic
6de0e0c99e Mark DFS functions static and rename them
These functions are not used from outside dfs.c anymore.

Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:54 +03:00
Janusz Dziedzic
58b73e3dd9 hostapd: DFS with 40/80 MHz channel width support
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:44 +03:00
Janusz Dziedzic
e76da50529 hostapd: Add AP DFS support
Add DFS structures/events handlers, CAC handling, and radar detection.
By default, after radar is detected or the channel became unavailable, a
random channel will be chosen.

This patches are based on the original work by Boris Presman and
Victor Goldenshtein. Most of the DFS code is moved to a new dfs.c/dfs.h
files.

Cc: Boris Presman <boris.presman@ti.com>
Cc: Victor Goldenshtein <victorg@ti.com>

Signed-hostap: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-hostap: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2013-10-17 21:05:15 +03:00