This parameter has no impact to TLS client functionality, so these is
not really any point to maintain these test cases.
Signed-off-by: Jouni Malinen <j@w1.fi>
Use vendor specific RADIUS attributes for sending ANonce and EAPOL-Key
msg 2/4 for the wpa_psk_radius=3 case. The vendor specific attributes
for this are defined in FreeRADIUS as follows:
BEGIN-VENDOR FreeRADIUS format=Extended-Vendor-Specific-5
ATTRIBUTE FreeRADIUS-802.1X-Anonce 1 octets[32]
ATTRIBUTE FreeRADIUS-802.1X-EAPoL-Key-Msg 2 octets
END-VENDOR FreeRADIUS
Signed-off-by: Jouni Malinen <j@w1.fi>
BoringSSL does not support group 25, so replace these cases with a
supported group 20 to meet the real testing need here.
Signed-off-by: Jouni Malinen <j@w1.fi>
BoringSSL is known not to support this option, so skip it to allow rest
of the test case to be performed without known failures.
Signed-off-by: Jouni Malinen <j@w1.fi>
BoringSSL commit dddb60eb9700110835ff6e2b429de40a17006429 ("Make most of
crypto/x509 opaque.") broke the direct access to these variables, so use
the accessor functions instead.
Signed-off-by: Jouni Malinen <j@w1.fi>
BoringSSL commit dddb60eb9700110835ff6e2b429de40a17006429 ("Make most of
crypto/x509 opaque.") broke the stack-allocated version, so move to
using X509_STORE_CTX_new() to get an opaque pointer to X509_STORE_CTX
instead.
Signed-off-by: Jouni Malinen <j@w1.fi>
Define the EC_GROUP_get_curve() wrapper for the older versions.
Fixes: 3c61f4db4c ("OpenSSL: Replace EC_GROUP_get_curve_GFp() calls with EC_GROUP_get_curve()")
Signed-off-by: Jouni Malinen <j@w1.fi>
Commit 0b5e98557e ("FIPS: Use OpenSSL CMAC implementation instead of
aes-omac1.c") added this implementation initially only for the FIPS
builds. However, there does not seem to be any remaining need to avoid
depending on the OpenSSL library implementation for builds, so move to
that implementation unconditionally to reduce the binary size a bit.
Signed-off-by: Jouni Malinen <j@w1.fi>
OpenSSL 3.0 deprecated the low-level CMAC functions, so use the new
EVP_MAC API for this. Maintain the CMAC API variant for older versions.
Signed-off-by: Jouni Malinen <j@w1.fi>
This is used with DPP and SAE when using P-384, so prepare the OpenSSL
implementation to support these cases to allow the internal CMAC
implementation in aes-omac1.c to be replaced.
Signed-off-by: Jouni Malinen <j@w1.fi>
This function is not used anymore, but the compatibility wrapper for
older OpenSSL versions was forgotten to be removed.
Fixes: 09c62aaf11 ("OpenSSL: Determine RSA key size without low-level routines")
Signed-off-by: Jouni Malinen <j@w1.fi>
hs20-osu-client compilation fails on Android O onwards because of
undefined reference for __android_log_print/__android_log_vprint.
Modify hs20-osu-client's Android.mk to include liblog library and
use tag 'hs20-osu-client' in logcat logs. Additionally, compile
hs20-osu-client to /vendor/bin in non-production builds.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The new DPP_BOOTSTRAP_GEN command parameter supported_curves can be used
to specify a colon separated list of supported curves. Information from
a parsed URI shows this information with a new supp_curves line in the
DPP_BOOTSTRAP_INFO output.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
git has started rejecting repositories owned by other users and refusing
to run the "git rev-parse HEAD" command in this type of cases. That
resulted in issues with the VM testing model where the VM is practically
running everything as root while the host is a normal development
environment and likely a non-root user owned files.
Fix this by fetching the commitid on the host and pass it to the VM so
that no git operations need to be run within the VM itself.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Do not add the --commit argument if the current git commitid cannot be
determined. This prevents complete failure to run the tests if the git
command cannot be used for some reason (like a recent change that
stopped allowing root user within the VM from running the git operation
for the case where the host system uses non-root account).
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add support to reset eLNA bypass configuration to default behavior.
If value of 2 is configured, the driver can choose either to
disable/enable eLNA bypass control and there is no enforcement
from userspace.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
OpenSSL 3.0 deprecated the low-level DH functions, so use the EVP API
for this. Maintain the DH API variant for older versions.
Signed-off-by: Jouni Malinen <j@w1.fi>
OpenSSL 3.0 deprecated the low-level HMAC functions, so use the EVP_MAC
API for this. Maintain the HMAC API variant for older versions.
Signed-off-by: Jouni Malinen <j@w1.fi>
This frees up the allocated resources and makes memory leak detection
more convenient without the known allocations being left behind.
Signed-off-by: Jouni Malinen <j@w1.fi>
OpenSSL 3.0 deprecated the low-level encryption functions, so use the
EVP API for this. Maintain the previous version for BoringSSL and
LibreSSL since not all versions seem to have the EVP_aes_*_wrap()
functions needed for the EVP API.
Signed-off-by: Jouni Malinen <j@w1.fi>
aes_encrypt_init() used incorrect function to free the EVP_CIPHER_CTX
allocated within this function. Fix that to use the OpenSSL function for
freeing the context.
Signed-off-by: Jouni Malinen <j@w1.fi>
When receiving a beacon report request with the mode set to active,
channels that are marked as NO_IR were not added to the scan request.
However, active mode just mean that active scan is allowed, but not
that it is a must, so these channels should not be omitted.
Include channels that are marked as NO_IR in the scan request even
if the mode is set to active.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
The id and cred_id variables are reset to 0 every time the
wpa_config_read() function is called, which is fine as long as it is
only called once. However, this is not the case when using both the -c
and -I options to specify two config files.
This is a problem because the GUI, since commit eadfeb0e93 ("wpa_gui:
Show entire list of networks"), relies on the network IDs being unique
(and increasing), and might get into an infinite loop otherwise.
This is solved by simply making the variables static.
Signed-off-by: Naïm Favier <n@monade.li>
Add Transmit Power Envelope element for 6 GHz per IEEE Std
802.11ax-2021.
Currently, this uses hard coded EIRP/PSD limits which are applicable to
6 GHz operation in United states, Japan, and Korea. Support to extract
power limits from kernel data will be added after complete regulatory
support is added for the 6 GHz band.
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Add new field definitions for the 6 GHz Operation Information field in
the HE Operation element per IEEE Std 802.11ax-2021, 9.4.2.249. These
will be used for TPC operation in the 6 GHz band.
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
IEEE Std 802.11ax-2021 introduces Regulatory Info subfield to specify
the 6 GHz access point type per regulatory. Add a user config option for
specifying this.
When not specified, Indoor AP type is selected for the 6 GHz AP by
default.
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
Add support for the Country element for the 6 GHz band per IEEE Std
802.11ax-2021, 9.4.2.8 (Country element).
Signed-off-by: Pradeep Kumar Chitrapu <quic_pradeepc@quicinc.com>
force_kdk_derivation is defined within CONFIG_TESTING_OPTIONS, so need
to use matching condition when accessing it.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
On the 6 GHz band the following is not allowed (see IEEE Std
802.11ax-2021, 12.12.2), so do not allow association with an AP using
these configurations:
- WEP/TKIP pairwise or group ciphers
- WPA PSK AKMs
- SAE AKM without H2E
In addition, do not allow association if the AP does not advertise a
matching RSNE or does not declare that it is MFP capable.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
So far, this option was only present in the Makefiles. Document it as
being available for configuration since the WFA program has already been
launched.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
The default behavior in wpa_supplicant is to disable use of TLSv1.3 in
EAP-TLS unless explicitly enabled in network configuration. The new
CONFIG_EAP_TLSV1_3=y build parameter can be used to change this to
enable TLSv1.3 by default (if supported by the TLS library).
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
It could have been possible to get into an endless loop of retried EAP
authentication followed by failing or not completed 4-way handshake if
there was a different interpretation of EAP authentication result
(success on AP, failure on STA). Avoid this by limiting the number of
consecutive EAPOL reauth attempts without completing the following 4-way
handshake.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
RFC 9190 requires protected result indication to be used with TLSv1.3,
so do not allow EAP-TLS to complete successfully if the server does not
send that indication.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
It would have been possible for the authentication attemps to go into a
loop if the AP/Authenticator/authentication server were to believe EAP
authentication succeeded when the local conclusion in Supplicant was
failure. Avoid this by timing out authentication immediately on the
second consecutive EAP authentication failure.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
While the drafts for RFC 9190 used a separate Commitment Message term,
that term was removed from the published RFC. Update the debug prints to
match that final language.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The previously used references were pointing to an obsoleted RFC and
draft versions. Replace these with current versions.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Change the top level Android.mk's LOCAL_PATH to S_LOCAL_PATH to
avoid potential LOCAL_PATH conflict in subdirectory's LOCAL_PATH.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
