Commit graph

2605 commits

Author SHA1 Message Date
Jouni Malinen
a9141cffb0 Updated EAP-TTLSv0 references to use RFC 5281 2008-08-16 10:17:22 +03:00
Jouni Malinen
1c8735848d nl80211: Preliminary code for usermode MLME support
This adds some parts needed to use usermode MLME with the current mac80211
(plus a patch to add a new cfg80211 command; not yet submitted to
wireless-testing). This version creates a monitor interface for management
frames and is able to send Probe Request frames during scan. However, it
looks like management frame reception is not yet working properly. In
addition, mlme_{add,remove}_sta() handlers are still missing.
2008-08-15 22:14:49 +03:00
Jouni Malinen
101533269f Fixed supported rates IE generation for Probe Response frames. 2008-08-15 22:10:41 +03:00
Jouni Malinen
7524cfb1a3 nl80211: Fixed re-initialization of removed and re-inserted interface
Network device ifindex will change when the interface is re-inserted.
driver_nl80211.c will need to accept netlink events from "unknown" (based
on ifindex) interfaces when a previously used card was removed earlier. If
the previously removed interface is added back, the driver_wext data need
to be updated to match with the new ifindex value. In addition, the initial
setup tasks for the card (set interface up, update ifindex, set mode, etc.)
from wpa_driver_nl80211_init() need to be run again.

This is the changes from commit 3fbda8f943
(driver_wext.c) ported for driver_nl80211.c.
2008-08-15 17:55:16 +03:00
Jouni Malinen
0a4e6cbf88 nl80211: Fixed set_mode() to actually use adhoc/station nl80211 variables 2008-08-15 17:52:37 +03:00
Jouni Malinen
c1e033b0bb IEEE Std 802.11r-2008 has been released, so update references 2008-08-15 11:25:24 +03:00
Jouni Malinen
d48ae45b73 Preparations for 0.6.4 release 2008-08-10 20:33:12 +03:00
Jouni Malinen
6724f4d07a Fixed MinGW build without CONFIG_NDIS_EVENTS_INTEGRATED defined 2008-08-10 18:11:41 +03:00
Jouni Malinen
ccb172ed75 Renamed MSG to PROC_MSG to avoid conflicts with MinGW winuser.h 2008-08-10 18:00:11 +03:00
Jouni Malinen
7b5776834b Fixed a NULL pointer dereference when driver initialization fails 2008-08-08 19:30:58 +03:00
Jouni Malinen
358921edb7 Added support for setting BSS parameters with NL80211_CMD_SET_BSS
This new cfg80211 command is used for setting CTS protect, short preamble,
and short slot time parameters for the BSS. The matching kernel change has
been submitted, but is not yet included in wireless-testing. The code here
used #ifdef to avoid compilation failures before the new command is
available.
2008-08-07 20:09:55 +03:00
Jouni Malinen
bf98f7f3bc Added support for opportunistic key caching (OKC)
This allows hostapd to share the PMKSA caches internally when multiple
BSSes or radios are being controlled by the same hostapd process.
2008-08-03 20:17:58 +03:00
Jouni Malinen
3ff77e070d Fixed opportunistic key caching (OKC)
wpa_sm_set_config() can be called even if the network block does not
change. However, the previous version ended up calling
pmksa_cache_notify_reconfig() every time and this cleared the network
context from PMKSA cache entries. This prevented OKC from ever being used.

Do not call pmksa_cache_notify_reconfig() if the network context remains
unchanged to allow OKC to be used.
2008-08-03 20:16:59 +03:00
Jouni Malinen
3fbda8f943 WEXT: Fixed re-initialization of removed and re-inserted interface
Network device ifindex will change when the interface is re-inserted.
driver_wext.c will need to accept netlink events from "unknown" (based on
ifindex) interfaces when a previously used card was removed earlier. If the
previously removed interface is added back, the driver_wext data need to be
updated to match with the new ifindex value. In addition, the initial setup
tasks for the card (set interface up, update ifindex, set mode, etc.) from
wpa_driver_wext_init() need to be run again.
2008-07-25 01:30:53 +03:00
Jouni Malinen
27e120c46d Cleaned up some of invalid documentation related to channel configuration. 2008-07-23 03:51:10 +03:00
Jouni Malinen
b0f23e11ed Fixed NULL pointer dereference on error path [Bug 273] 2008-07-18 05:57:03 +03:00
Jouni Malinen
6652b61cd4 Fixed EAP-TNC not to include extra EAP header and TNC flags
The change to support fragmentation added extra function to generate the
EAP header, but forgot to remove the original code and ended up getting two
EAP headers and TNC flags field in the generated message. These header
fields need to be added only in the function that builds the final message
(and if necessary, fragments the data).
2008-07-17 02:17:37 +03:00
Dan Williams
93ef879f0f wext: fix maxrate calculation
When scan results got moved from wpa_scan_result -> wpa_scan_res, the
'maxrate' member was dropped from wpa_scan_res.  The D-Bus interface
used 'maxrate', which was replaced with wpa_scan_get_max_rate().
Unfortunately, wpa_scan_get_max_rate() returns 802.11 rate values
directly from the IE, where 'maxrate' was the rate in bits/second.  The
supplicant internally fakes an IE for wpa_scan_res from the value of
wpa_scan_result->maxrate, but interprets ->maxrate as an 802.11 rate
index.

As a side-effect, this fixes a soft-break of the D-Bus control API since
the wpa_scan_res change was introduced.
2008-07-15 20:07:50 +03:00
Jouni Malinen
6e33ca4529 Fixed wpa_scan_get_max_rate() to clear the basicrate flag when determining
the highest rate.
2008-07-15 20:05:50 +03:00
Michael Bernhard
886a807fb5 Make proactive key caching working again
Function 'wpa_sm_set_config' used the argument 'config' as the network
context which is a pointer to a local variable of the function
'wpa_supplicant_rsn_supp_set_config'.

This is one reason why no proactive key was generated. This network
context never matched with the network context saved in the pmksa cache
entries.

The structure 'rsn_supp_config' has already a member 'network_ctx' which
is now filled in by this patch with 'ssid'.

Signed-off-by: Michael Bernhard <michael.bernhard@bfh.ch>
2008-07-06 10:50:53 +03:00
Pavel Polischouk
9d6762cfca man wpa_supplicant: Clearly state which options are given per interface
Documentation appeared a little vague about which options are global and
which are tied to a particular interface. This leads to confusion when
using certain combinations of options, e.g. the command "wpa_supplicant
-c /etc/wpa_supplican.conf -u" will not do what is intuitively expected
from it - it will not read the config file given with -c option because
no -i option was given. This command is still valid because -u option is
used. The wpa_supplicant running like this will also not listen on any
control socket, because the socket file name is usually given in the
config file. This command line also happens to be the default in Fedora 9.
This patch does not try to change any behaviour, but rather document
these nuances clearly.
2008-06-18 11:52:20 +03:00
Jouni Malinen
eb0699b6ba Add IGTK/MFP configuration (disabled by default)
Added code to use suggested nl80211/cfg80211 API for setting MFP related
parameters. This is disabled by default since the API changes has not yet
been approved. The new commands can be enabled by defining
NL80211_MFP_PENDING (this will be removed once the API changes is
approved).
2008-06-18 11:23:59 +03:00
Jouni Malinen
089165e6a4 Added temporary #ifdef WEXT_MFP_PENDING around the MFP changes
Just in case, do not use the not-yet-approved WEXT changes even if someone
where to build wpa_supplicant with IEEE 802.11w support unless this new
macro has been defined explicitly.
2008-06-18 11:18:26 +03:00
Jouni Malinen
f0732adfe0 WEXT: IEEE 802.11w/MFP configuration
Added configuration of MFP related parameters with WEXT. The changes to
linux/wireless.h have not yet been applied to the Linux kernel tree, so the
code using them is still open to changes and is ifdef'ed out if
CONFIG_IEEE80211W is not set.
2008-06-18 11:13:33 +03:00
Masakazu Mokuno
84737a46a4 Add support for the driver which do 4-way handshake
Add the support for the Linux wireless drivers which want to do
4-way handshake and need to know the PSK before the handshake.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
2008-06-18 11:09:00 +03:00
Masakazu Mokuno
e0f775b2a4 Add the flags for the drivers which do 4-way handshake
Add the new flags which are supposed to be included in Linux 2.6.27
for the drivers which want to do 4-way handshake and to know PMK.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
2008-06-18 11:03:18 +03:00
Jouni Malinen
f3f7540edc Added WLAN_STA_MFP flag for driver wrappers so that they can configure the
driver to enable MFP (IEEE 802.11w) processing for the STA.
2008-06-17 11:21:11 +03:00
Jouni Malinen
94e5af7948 Added support for configuring IGTK
This needs changes in kernel code, too, but the cipher suite for IGTK is
defined in IEEE 802.11w, so this code in hostapd side can be added now.
2008-06-16 11:20:01 +03:00
Jouni Malinen
f598194e7a Removed forgotten todo entry 2008-06-10 20:57:32 +03:00
Jouni Malinen
1ef83fae63 Added support for AP mode Beacon transmission 2008-06-10 20:46:12 +03:00
Jouni Malinen
561c0c4c3e Set ACK flag properly for txstatus 2008-06-10 19:44:26 +03:00
Jouni Malinen
2b5ac52ee0 Use _irqsafe versions of ieee80211 rx and tx_status functions 2008-06-10 19:28:39 +03:00
Jouni Malinen
badba00bd4 Added start/stop handlers and do not send frames to stopped radios 2008-06-10 19:27:00 +03:00
Jouni Malinen
a218a713b8 Added a comment about hwsim# 2008-06-10 18:10:40 +03:00
Jouni Malinen
1f9afa67e3 Added global monitor interface (hwsim#)
This new netdev is created by hwsim, not mac80211, and as such, it is
available all the time (i.e., can be UP before starting mac80211 netdevs)
and it will receive all frames regardless of the channel etc.
2008-06-10 17:11:58 +03:00
Jouni Malinen
a837861751 Fixed tx() handler to use GFP_ATOMIC. 2008-06-10 15:49:06 +03:00
Jouni Malinen
de08c7248d Added mac80211_hwsim - software simulator of 802.11 radio(s) for mac80211
mac80211_hwsim is a Linux kernel module that can be used to simulate
arbitrary number of IEEE 802.11 radios for mac80211 on a single
device. It can be used to test most of the mac80211 functionality and
user space tools (e.g., hostapd and wpa_supplicant) in a way that
matches very closely with the normal case of using real WLAN
hardware. From the mac80211 view point, mac80211_hwsim is yet another
hardware driver, i.e., no changes to mac80211 are needed to use this
testing tool.
2008-06-10 13:31:25 +03:00
Jouni Malinen
3e2ad1b932 Fixed race condition between disassociation event and group key handshake
This avoids getting stuck in state where wpa_supplicant has canceled scans,
but the driver is actually in disassociated state. The previously used code
that controlled scan timeout from WPA module is not really needed anymore
(and has not been needed for past four years since authentication timeout
was separated from scan request timeout), so this can simply be removed to
resolved the race condition. As an extra bonus, this simplifies the
interface to WPA module.
[Bug 261]
2008-06-09 16:26:47 +03:00
Jouni Malinen
2eeaa5c9d0 EAP-PEAP: Moved the common peap_prfplus() function into a shared file 2008-06-09 10:32:12 +03:00
Jouni Malinen
3f5285e852 Added a preliminary nl80211/cfg80211 driver interface for wpa_supplicant
driver_nl80211.c is based on driver_wext.c and it is still using Linux
wireless extensions for many functions. Over time, the new driver interface
code should be modified to use nl80211/cfg80211 for everything.
2008-06-06 16:55:42 +03:00
Jouni Malinen
3f3339dfe7 Fixed a buffer overflow in nla_parse call
The first argument (tb) to nla_parse must have room for maxtype+1, not
maxtype, elements.
2008-06-06 16:51:17 +03:00
Pavel Roskin
f3833aee90 Fix compile warnings on 64-bit systems
Don't cast pointers to int in definitions of PRISM2_HOSTAPD_RID_HDR_LEN
and PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN.  Use size_t instead.  That's
actually what the code needs.
2008-06-06 14:17:03 +03:00
Jouni Malinen
ad844747ca Updated the LibTomMath reference to use 0.41 version 2008-06-06 10:32:09 +03:00
Jouni Malinen
187bc466a3 Removed the 20% estimate on faster bignum routines
This was not accurate since this was mostly based on total runtime of an
eapol_test run. The real improvement in the bignum routines is much larger
(mayby twice as fast as before).
2008-06-06 10:30:43 +03:00
Jouni Malinen
b95394c66f Combined internal LibTomMath configuration into one option
CONFIG_INTERNAL_LIBTOMMATH_FAST=y in .config can now be used to enable all
optimized routines at a cost of about 4 kB. This is small enough increase
in size to justify simplified configuration.
2008-06-06 10:21:28 +03:00
Jouni Malinen
ec0205a87a Added an option to build internal LibTomMath with faster div routine
At the cost of about 1 kB of additional binary size, the internal
LibTomMath can be configured to include faster div routine to speed up DH
and RSA. This can be enabled with CONFIG_INTERNAL_LIBTOMMATH_FAST_DIV=y in
.config.
2008-06-06 10:11:17 +03:00
Jouni Malinen
b6ab429402 Read Michael MIC keys through TK2 union instead of offset from TK1
This gets rid of potential warnings about buffer bounds errors. The earlier
code works fine, but it is not the cleanest way of using the struct wpa_ptk
definition for TK1/TK2.
2008-06-05 21:00:56 +03:00
Jouni Malinen
7cdeb81e1f Fixed potential NULL pointer dereference if memory allocation fails 2008-06-05 20:44:30 +03:00
Jouni Malinen
815c5e1435 Fixed RADIUS client local address forcing for IPv6 (eapol_test)
Need to use the IPv6 address data in bind() call if IPv6 is selected.
2008-06-05 20:33:33 +03:00
Jouni Malinen
c5f5c91aeb Add faster, optional sqr routine for internal LibTomMath
At the cost of about 0.5 kB of additional binary size, the internal
LibTomMath can be configured to include faster sqr routine to speed up DH
and RSA. This can be enabled with CONFIG_INTERNAL_LIBTOMMATH_FAST_SQR=y in
.config.
2008-06-05 18:33:46 +03:00