Commit graph

4101 commits

Author SHA1 Message Date
Jouni Malinen
70e070461d WPS UFD: Use private data structure for oob_device_data
This gets rid of global variable use and may be needed to allow
concurrent access in some case if the interface is extended.
2009-02-26 22:04:49 +02:00
Jouni Malinen
390cd3105d WPS UFD: Make build conditional on CONFIG_WPS_UFD=y
Not all embedded devices have USB interface and it is useful to be able
to remove unneeded functionality from the binary. In addition, the
current implementation has some UNIX specific calls in it which may make
it not compile cleanly on all target systems.
2009-02-26 22:01:36 +02:00
Jouni Malinen
a79e73a1b1 WPS UFD: Use mkdir() instead of system("mkdir ..") 2009-02-26 22:00:29 +02:00
Masashi Honma
46bdb83acd WPS: Add UFD support (USBA out-of-band mechanism)
This patch is only for the following use case:
- Enrollee = wpa_supplicant
- Registrar = hostapd internal Registrar

Following UFD methods can be used:
- Enrollee PIN with UFD
- Registrar PIN with UFD
- unencrypted credential with UFD

Encrypted credentials are not supported.

Enrollee side operation:
wpa_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

wpa_cli -i ath0 wps_oob ufd /mnt/ pin-r

Registrar side operation:
./hostapd_cli -i ath0 wps_oob <device type> <mount point> <oob method>
    oob method = pin-e/pin-r/cred

hostapd_cli -i ath0 wps_oob ufd /mnt/ cred
2009-02-26 21:57:38 +02:00
Jouni Malinen
b414900a90 Reduce latency on starting WPS negotiation (TX EAPOL-Start earlier)
Reduce startWhen from 3 to 1 second if WPS is included in the build.
While this is done regardless of runtime WPS configuration, it is fine
to use a smaller value here in general. This cuts two seconds out from
WPS negotiation if the driver does not support addition of WPS IE into
the (Re)Association Request frame.
2009-02-23 20:59:27 +02:00
Jouni Malinen
a20088e576 Allow SHA256-based key handshake to be used without 802.11r
Previously, both CONFIG_IEEE80211W=y and CONFIG_IEEE80211R=y were needed
to enable SHA256-based key handshake (WPA-PSK-SHA256 and
WPA-EAP-SHA256). This can now be done with just CONFIG_IEEE80211W=y.
2009-02-19 19:49:34 +02:00
Jouni Malinen
7c2849d2a0 Add BSS flags to scan results to indicate signal quality validity
These flags are used to mark which values (level, noise, qual) are
invalid (not available from the driver) and whether level is using dBm.
D-Bus interface will now only report the values that were available.
2009-02-18 13:40:38 +02:00
Jouni Malinen
d173df5232 nl80211: Use per-scan request WPS IE
Replace the global set probe request IEs mechanism with a new nl80211
option for specifying vendor IEs for each scan request.
2009-02-18 12:49:25 +02:00
Jouni Malinen
878ad127ba Sync nl80211_copy.h with wireless-testing linux/nl80211.h 2009-02-18 11:28:55 +02:00
Jouni Malinen
f2d8fc3d96 Do not try session resumption after EAP failure
If session resumption fails for any reason, do not try it again because
that is just likely to fail. Instead, drop back to using full
authentication which may work. This is a workaround for servers that do
not like session resumption, but do not know how to fall back to full
authentication properly.
2009-02-15 17:36:49 +02:00
Daniel Mierswa
d94d4bafbb Improved 'make install' (use BINDIR/LIBDIR, install shared objects) 2009-02-15 14:22:50 +02:00
Daniel Mierswa
6301cc5d38 Allow the privsep driver to pass the set_country to the real driver 2009-02-15 14:13:27 +02:00
Jouni Malinen
2cfcd014f4 Check EAP-AKA' AT_KDF duplication only if KDF was negotiated
This fixes an issue where two AKA'/Challenge messages are received when
resynchronizing SEQ#. Previously, this used to trigger an authentication
failure since the second Challenge message did not duplicate AT_KDF.
2009-02-15 10:28:55 +02:00
Jouni Malinen
3fe430b5d5 Add debug prints for couple of new EAP-AKA' attributes 2009-02-15 10:28:16 +02:00
Jouni Malinen
ba2a573c5f Rename "broadcast SSID" to "wildcard SSID"
"Wildcard SSID" is the term used in IEEE Std 802.11-2007, so it is a
better name for the zero-length SSID used in Probe Request.
2009-02-14 22:21:17 +02:00
Jouni Malinen
6a1063e008 driver_nl80211: Add support for multi-SSID scan requests 2009-02-14 21:17:46 +02:00
Jouni Malinen
f55b218a5c driver_test: Implement scan2() handler
This does not actually send out separate scan requests for each SSID,
but the debug output can be used to test scan2() functionality with
multiple SSIDs.
2009-02-14 17:11:21 +02:00
Jouni Malinen
fc2b7ed5f3 Add extended driver scan request command: driver_ops::scan2()
This can be used to provide support for scanning multiple SSIDs at a
time to optimize scan_ssid=1 operations. In addition, Probe Request IEs
will be available to scan2() (e.g., for WPS PBC scanning).
2009-02-14 17:01:32 +02:00
Jouni Malinen
362f781e1c Allow multiple driver wrappers to be specified on command line
For example, -Dnl80211,wext could be used to automatically select
between nl80211 and wext. The first driver wrapper that is able to
initialize the interface will be used.
2009-02-14 16:43:43 +02:00
Jouni Malinen
7d315b7b42 nl80211: Remove one second sleep after iface up
This workaround was needed with some drivers that used WEXT, but there
is no known nl80211-enabled driver that would need this, so lets get rid
of the extra delay.
2009-02-12 22:05:36 +02:00
Jouni Malinen
80bc75f135 New driver capability info: max number of scan SSIDs
The driver wrappers can now inform wpa_supplicant how many SSIDs can
be used in a single scan request (i.e., send multiple Probe Requests
per channel). This value is not yet used, but it can eventually be used
to allow a new scan command to specify multiple SSIDs to speed up
scan_ssid=1 operations. In addition, a warning could be printed if
scan_ssid=1 is used with a driver that does not support it
(max_scan_ssids=0).
2009-02-12 22:05:32 +02:00
Jouni Malinen
97865538ba nl80211: Replace WEXT scan event with nl80211
Use the new nl80211 scan event mechanism instead of the WEXT event.
This completes the move from WEXT scanning into nl80211 scanning.
2009-02-12 20:19:49 +02:00
Jouni Malinen
b3db1e1cd3 nl80211: Replace SIOCGIWSCAN with NL80211_CMD_GET_SCAN
This replaces the WEXT mechanism for fetching scan results with the new
nl80211 mechanism.
2009-02-12 20:19:33 +02:00
Jouni Malinen
0e75527f7e nl80211: Replace SIOCSIWSCAN with NL80211_CMD_TRIGGER_SCAN
This is the first step in replacing WEXT-based scan with the new
nl80211-based mechanism.
2009-02-12 20:19:09 +02:00
Jouni Malinen
b938903e41 Sync nl80211.h with the current wireless-testing version 2009-02-12 14:46:26 +02:00
Jouni Malinen
265ca78917 Add another Milenage test set that is suitable for EAP-AKA'
The Test Set 19 from TS 35.208 has an AMF with the separation bit set
and as such, it is suitable for EAP-AKA' testing.
2009-02-11 17:29:03 +02:00
Jouni Malinen
35f30422ec EAP-AKA': Verify that AMF separation bit is set 2009-02-11 17:28:42 +02:00
Helmut Schaa
e1b525c356 Use signal quality if level is not available for comparing max rates
Some drivers (for example ipw2100) do not report signal level but only
signal quality. wpa_supplicant already uses the signal quality if no
level is reported and all other comparision parameters are equal to sort
the scan results. However, if two APs have different max rates and the
signal level does not differ much wpa_supplicant chooses the AP with the
higher max rate.

In case of ipw2100 no signal level is reported and thus wpa_supplicant
always takes the AP with higher max rate even if its signal quality is
really low. For example if AP1 (max rate 11Mb/s, 80% signal quality) and
AP2 (max rate 54 Mb/s, 20% signal quality) are found by a scan
wpa_supplicant would choose AP2.

Hence, if no signal level is reported depend on the signal quality if
max rate should be compared. A quality difference of 10% is considered
acceptable in favor of the higher max rate.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2009-02-10 13:47:14 +02:00
Jouni Malinen
4853d5ac84 wext: Force disconnect on deauthenticate()
Use the same zero-BSSID, random-SSID trick for both disassociate() and
deauthenticate().
2009-02-10 11:43:40 +02:00
Dan Williams
b965fa7294 wext: really disassociate (set random SSID)
Really disassociate when tearing stuff down; drivers may sometimes
(legally) keep trying to reassociate unless the BSSID is unlocked.  If
the SSID is unlocked too, under WEXT drivers are able to pick an SSID to
associate, so kill that behavior by setting a bogus SSID.  Unfortunately
WEXT doesn't provide an easy method to say "stop whatever doing and just
idle".

Signed-off-by: Dan Williams <dcbw@redhat.com>
2009-02-10 11:40:19 +02:00
Jouni Malinen
edd757e8a3 Use larger buffer for TLS encryption to avoid issues with GnuTLS
It looks like GnuTLS (at least newer versions) is using random padding
on the application data and the previously used 100 byte extra buffer
for tls_connection_encrypt() calls was not enough to handle all cases.
This resulted in semi-random authentication failures with EAP-PEAP and
EAP-TTLS during Phase 2.

Increase the extra space for encryption from 100 to 300 bytes and add an
error message into tls_gnutls.c to make it easier to notice this issue
should it ever show up again even with the larger buffer.
2009-02-09 22:37:55 +02:00
Masashi Honma
363a9e2434 WPS: Set correct Selected Registrar Config Methods attribute
I tried PBC with the hostapd registrar.
I pushed the button with "hostap_cli WPS_PBC".
But hostapd registrar always sends Selected Registrar Config Methods
attribute=0x0000 in beacon/probe response.
2009-02-09 19:50:52 +02:00
Alan T. DeKok
02a89365ab Create os_daemon for OS X, as it's now deprecated (Leopard)
Using it results in an error at build time.  So we replace it.
2009-02-08 13:40:34 +02:00
Jeremy C. Reed
898d6921b4 Allow driver_bsd.c to be built for NetBSD 2009-02-08 13:28:37 +02:00
Jouni Malinen
a3bfd14de1 Use os_strlcpy instead of os_strncpy when copying ifname
In theory, the ifname could be IFNAMSIZ characters long and there would
not be room for null termination.
2009-02-08 13:26:33 +02:00
Jouni Malinen
7818ad2c8f Avoid memory leak on error path in crypto_cipher_init() 2009-02-07 12:07:06 +02:00
Jouni Malinen
23a139246d Add crypto_cipher_{init,encrypt,decrypt,deinit} for GnuTLS 2009-02-07 12:04:45 +02:00
Jouni Malinen
96c7c3072d Fix privsep build with CONFIG_CLIENT_MLME=y
Add wpa_supplicant_sta_free_hw_features() and wpa_supplicant_sta_rx()
for driver wrappers in wpa_priv.
2009-02-07 10:30:32 +02:00
Jouni Malinen
745cb54e86 Removed printf size_t format warning on 64-bit 2009-02-07 10:16:11 +02:00
Pavel Roskin
4c2660c2b0 Fix building dynamic EAP peer modules
Strip directory name from the target in the pattern rule for dynamic
modules.  Remove dynamic modules on "make clean".
2009-02-07 10:05:23 +02:00
Jouni Malinen
d0184cb25c UPnP: Renamed PutWLANResponse callback function to match action
No point in adding extra "event_" to the name.
2009-02-06 21:44:19 +02:00
Jouni Malinen
915c1ba3c5 WPS UPnP: Added support for multiple external Registrars
Allow more than one pending PutWLANMessage data to be stored (M2/M2D
from multiple external Registrars) and drop pending M2/M2D messages when
the Enrollee replies with M3.
2009-02-06 21:39:32 +02:00
Jouni Malinen
745f8b664d WPS UPnP: Add IP address and port details into debug messages
This makes it much easier to debug operations with multiple external
Registrars.
2009-02-06 19:04:55 +02:00
Jouni Malinen
b93b6004e4 WPS: Allow minor version differences in Version attribute check
Version attribute processing details are not described in the WPS spec,
but it is safer to allow minor version to change and only refuse to
process the message if major version is different from ours. This
matches with the behavior used in the Intel reference implementation.
2009-02-06 14:19:59 +02:00
Jouni Malinen
f65cbff3a3 WPS: Moved Version attribute validation into a shared function 2009-02-06 14:15:47 +02:00
Jouni Malinen
fda90ab4b7 UPnP: Removed shadowed variable 2009-02-06 14:05:17 +02:00
Andriy Tkachuk
25e31cccbe WPS: Set correct Device Password ID in M2
It looks like we don't set correspondent Device Password ID attribute in
M2 message during PBC registration. Without it TG185n STA was not able
to connect to our AP in PBC mode. Attached patch fixes this.
2009-02-06 14:03:34 +02:00
Masashi Honma
1e2688be3e Setting probe request ie with madwifi driver
The madwifi driver has interface to set probe request ie.
Attached patch will enable the functionality.
I could see probe request includes WSC IE with this patch.
2009-02-05 19:19:19 +02:00
Jouni Malinen
3a19555445 Add crypto_mod_exp() for GnuTLS (libgcrypt)
This allows WPS to be linked with GnuTLS.
2009-02-05 18:57:26 +02:00
Jouni Malinen
5f1f352e6c Cleaned up printf format warnings on 64-bit build 2009-02-05 18:18:31 +02:00
Jouni Malinen
42f1ee7d1f Fixed scan buffer increasing with WEXT
We can now handle up to 65535 byte result buffer which is the maximum
due to WEXT using 16-bit length field. Previously, this was limited to
32768 bytes in practice even through we tried with 65536 and 131072
buffers which we just truncated into 0 in the 16-bit variable.

This more or less doubles the number of BSSes we can received from scan
results.
2009-02-05 12:00:23 +02:00
Jouke Witteveen
94abc2f11b Better support in RoboSwitch driver
I am terribly sorry, but because of a lack of testing equipment the
patch was submitted not properly tested.
Because the chipset documentation is not publicly available all
behaviour has to be found out by experimentation. The other day, I
made some incorrect assumptions based on my findings.

I do believe the attached patch does support the whole RoboSwitch line
(5325, 5350, 5352, 5365 and others). It is a drop-in substitution for
my previous submission.
2009-02-04 22:05:14 +02:00
Jouni Malinen
e80e5163f8 UPnP: Minor coding style cleanup 2009-02-03 13:25:49 +02:00
Jouke Witteveen
c0a0c97aa9 Better support in RoboSwitch driver
The RoboSwitch driver of wpa_supplicant had one shortcoming: not
supporting the 5365 series. I believe the patch attached fixes this
problem.

Furthermore it contains a small readability rewrite. It basically is an
explicit loop-rollout so that the wpa_driver_roboswitch_leave style
matches that of wpa_driver_roboswitch_join.
2009-02-03 13:13:54 +02:00
Jouni Malinen
6e488ff03c Remove orphaned wpa_cli control socket on EADDRINUSE
If the bind() on /tmp/wpa_ctrl_<pid>_<in-proc-counter> fails with
EADDRINUSE, there is an existing socket file with the name we are trying
to create. Since getpid() is unique, there cannot be another process
using that socket and we can just unlink the file and try again. This
can speed up client connection if wpa_cli is killed without allowing it
to clean up the socket file. [Bug 288]
2009-01-31 22:22:09 +02:00
Jouni Malinen
1c5aeef0c2 Add comments on the new Broadcom driver not using driver_broadcom.c
The newer Broadcom driver ("hybrid Linux driver") supports Linux
wireless extensions and does not need (or even work) with the old
driver wrapper.
2009-01-30 21:34:40 +02:00
Jouni Malinen
f620268f13 WPS: Add support for external Registrars using UPnP transport
This adds mostly feature complete external Registrar support with the
main missing part being proper support for multiple external Registrars
working at the same time and processing of concurrent registrations when
using an external Registrar.

This code is based on Sony/Saice implementation
(https://www.saice-wpsnfc.bz/) and the changes made by Ted Merrill
(Atheros) to make it more suitable for hostapd design and embedded
systems. Some of the UPnP code is based on Intel's libupnp. Copyrights
and licensing are explained in src/wps/wps_upnp.c in more detail.
2009-01-29 18:47:02 +02:00
Jouni Malinen
39034ce80f Fixed WPS Authenticator attribute processing after M2D
We must not replace M1 with M2D as the last_msg since we need M1 to
validate a possible M2 after M2D. Since M2D and ACK/NACK replies do not
include Authenticator attribute, we can just ignore M2D as far as
updating last_msg is concerned.
2009-01-28 11:59:29 +02:00
Jouni Malinen
1a5a04c3de WPS: Add a workaround for incorrect passphrase encoding in Network Key
External Registrar in Vista may include NULL termination in the Network
Key when encoding an ASCII passphrase for WPA/WPA2-PSK. As a workaround,
remove this extra octet if present.
2009-01-24 12:50:00 +02:00
Jouni Malinen
3b2cf800af WPS: Lock AP Setup on multiple AP PIN validation failures
If a Registrar tries to configure the AP, but fails to validate the
device password (AP PIN), lock the AP setup after four failures. This
protects the AP PIN against brute force guessing attacks.
2009-01-23 21:57:43 +02:00
Jouni Malinen
4c29cae932 Added ap_settings option for overriding WPS AP Settings in M7
This optional configuration parameter can be used to override AP
Settings attributes in M7 similarly to extra_cred option for Credential
attribute(s) in M8.
2009-01-23 21:08:55 +02:00
Jouni Malinen
b385188de3 Add an EAPOL payload length workaround for a WPS implementation
Buffalo WHR-G125 Ver.1.47 seems to send EAP-WPS packets with too short
EAPOL header length field (14 octets regardless of EAP frame length).
This is fixed in firmware Ver.1.49, but the broken version is included
in many deployed APs. As a workaround, fix the EAPOL header based on the
correct length in the EAP packet. This workaround can be disabled with
eap_workaround=0 option in the network configuration.
2009-01-23 18:01:03 +02:00
Jouni Malinen
a609915233 Allow WPS APs for PIN enrollment even without Selected Registrar
Some WPS APs do not set Selected Registrar attribute to 1 properly when
using an external Registrar. Allow such an AP to be selected for PIN
registration after couple of scan runs that do not find APs marked with
Selected Registrar = 1. This allows wpa_supplicant to iterate through
all APs that advertise WPS support without delaying connection with
implementations that set Selected Registrar = 1 properly.
2009-01-23 13:10:58 +02:00
Jouni Malinen
b3ddab2122 WPS: Pad DH Public Key and Shared Key to 192 octets
WPS spec is not very specific on the presentation used for the DH
values. The Public Key attribute is described to be 192 octets long, so
that could be interpreted to imply that other places use fixed length
presentation for the DH keys. Change the DH derivation to use fixed
length bufferd by zero padding them from beginning if needed. This can
resolve infrequent (about 1/256 chance for both Public Key and Shared
Key being shorter) interop issues.
2009-01-22 19:32:58 +02:00
Masashi Honma
96fa129da9 Use WPS state Not Configured instead of Configured in Enrollee
This is needed to allow external Registrar (at least the implementation
in Windows Vista) to configure the Enrollee.

With this patch and my previous patch (for wps.c) , I could pass "Wi-Fi
WPS Test Plan Version 1.0 [5.1.4. Add to AP using PIN Config method and
PASS PHRASE through wired external registrar]".
2009-01-22 15:18:03 +02:00
Masashi Honma
e29bcf9eab WPS: Check Device Password ID attribute only if present in AP search
I can't pass the "Wi-Fi WPS Test Plan Version 1.0 [5.1.4. Add to AP
using PIN Config method and PASS PHRASE through wired external
registrar]". The wpa_supplicant-0.6.7 can't recoginize the testbed
AP(BCM94704AGRRev-E.2.4) as WPS PIN AP. Because after PIN entered, the
AP sends Selected Registrar attribute=0 and not send Device Password ID
attribute.

The proposed change as-is removed validation of Selected Registrar
attribute completely. However, that part is not included in this commit
since it can cause problems for environments with multiple WPS-enabled
APs. Another workaround for this will be considered in wpa_supplicant
scanning process (e.g., start trying to use WPS with APs that do not set
Selected Registrar to TRUE after couple of scan runs that do not find
any APs with Selected Registrar TRUE).
2009-01-22 15:12:18 +02:00
Jouni Malinen
aabe26a136 WPS: Added option to disable AP auto-config on first registration
This operation can now be moved into an external program by configuring
hostapd with wps_cred_processing=1 and skip_cred_build=1. A new
ctrl_iface message (WPS-REG-SUCCESS <Enrollee MAC addr> <UUID-E>) will
be used to notify external programs of each successful registration and
that can be used as a tricker to move from unconfigured to configured
state.
2009-01-21 13:48:10 +02:00
Jouni Malinen
05bf32cc87 Changed Credential MAC Address to be BSSID in AP/Registrar
WPS spec is not very clear on which MAC address is used here, but BSSID
makes more sense than Enrollee MAC address.
2009-01-20 21:28:31 +02:00
Jouni Malinen
790ccdb2b3 Changed the version to 0.7.0 since development branch is now 0.7.x 2009-01-20 21:16:29 +02:00
Jouni Malinen
3a4606585c Implement set_probe_req_ie() for nl80211 drivers 2009-01-20 14:06:02 +02:00
Jouni Malinen
b0e8a05a1e Sync nl80211_copy.h with wireless-testing.git linux/nl80211.h 2009-01-20 13:56:58 +02:00
Jouni Malinen
adddffd129 Fixed MFP Association Comeback mechanism to use Timeout Interval IE
The separate Association Comeback Time IE was removed from IEEE 802.11w
and the Timeout Interval IE (from IEEE 802.11r) is used instead. The
editing on this is still somewhat incomplete in IEEE 802.11w/D7.0, but
still, the use of Timeout Interval IE is the expected mechanism.
2009-01-19 18:42:10 +02:00
Jouni Malinen
eca6e0a9a5 WPS: Provide the unparsed Credential attribute to cred_cb()
This makes it easier to pass the credential data to external programs
(e.g., Network Manager) for processing. The actual use of this data is
not yet included in hostapd/wpa_supplicant.
2009-01-17 22:17:12 +02:00
Jouni Malinen
655e466600 Changed the Network Index value to 1 since that is the default value 2009-01-17 21:14:13 +02:00
Jouni Malinen
0f057fb2c7 Added a separate ctx pointer for wpa_msg() calls in WPA supp
This is needed to allow IBSS RSN to use per-peer context while
maintaining support for wpa_msg() calls to get *wpa_s as the pointer.
2009-01-17 17:54:40 +02:00
Jouni Malinen
0d1286e411 Added support for IBSS scanning into driver_test 2009-01-17 16:44:05 +02:00
Jouni Malinen
6fa68a0ee5 Added an option to add (or override) Credential attribute(s) in M8 2009-01-16 22:50:41 +02:00
Jouni Malinen
11ef8d3578 Added initial step for IBSS RSN support
This commit adds a new build option, CONFIG_IBSS_RSN=y, that can be used
to enable RSN support for IBSS. This links in RSN Authenticator code
from hostapd and adds code for managing per-peer information for IBSS. A
new wpa_cli command or driver event can be used to request RSN
authentication with an IBSS peer. New RSN Authenticator and Supplicant
will be allocated for each peer.

The basic state machine setup code is included in this commit, but the
state machines are not properly started yet. In addition, some of the
callback functions are not yet complete.
2009-01-15 01:21:55 +02:00
Jouni Malinen
13268290b6 Moved rsn_pmkid() into shared code to avoid duplication 2009-01-14 21:31:47 +02:00
Dan Williams
8f33641c94 driver_wext: Add IW_ENCODE_TEMP into SIOCSIWENCODE{,EXT} calls
This is needed for airo driver to work correctly and no other driver
seems to care, so the change is safe to make. This has been in number of
distro releases for a long time and no issues have been reported.
2009-01-13 20:42:15 +02:00
Jouni Malinen
540264a721 Removed wpa_sm dereference from pmksa_cache_list() 2009-01-13 20:22:42 +02:00
Jouni Malinen
f5a51b58d4 Moved proto == RSN validation from pmksa_cache.c into the caller 2009-01-13 20:15:06 +02:00
Jouni Malinen
010dc06853 Moved RADIUS Class attribute helpers into RADIUS module 2009-01-13 20:01:29 +02:00
Jouni Malinen
0b8695bb2b Renamed shadowed variable 2009-01-13 19:31:51 +02:00
Jouni Malinen
03ba2cb4c6 Added CONFIG_NO_AES_EXTRAS for hostapd
This allows unneeded AES routines to be removed from the build to reduce
binary size.
2009-01-12 15:15:35 +02:00
Jouni Malinen
3904625396 Silenced some sparse warnings 2009-01-11 10:42:07 +02:00
Jouni Malinen
76e2592190 Share the same radiotap helper implementation 2009-01-09 15:22:19 +02:00
Jouni Malinen
f88bd28836 Added support for removing RADIUS accounting and RADIUS in general
CONFIG_NO_ACCOUNTING=y and CONFIG_NO_RADIUS=y build options can now be
used to remove RADIUS support from the hostapd build.
2009-01-08 19:15:25 +02:00
Jouni Malinen
7d02e64157 Mark shared secret const in RADIUS client routines 2009-01-08 16:41:47 +02:00
Jouni Malinen
1c6e69ccda Moved documentation from developer.txt into source code files
Use Doxygen comments for functions to replace the old text file that was
not up-to-date anymore.
2009-01-08 16:33:00 +02:00
Jouni Malinen
6f78f2fb3b Preparations for 0.6.7 release 2009-01-06 20:11:15 +02:00
Ihar Hrachyshka
7ee6258f7c Fix wpa_supplicant build for uClinux
The code contains a bogus #ifdef for uClinux building. [Bug 286]
2009-01-05 20:32:04 +02:00
Jouni Malinen
b39d1280a7 Silenced number of Doxygen warnings 2009-01-04 15:07:54 +02:00
Jouni Malinen
08c0f0670a Completed Doxygen documentation for functions declared in wps/wps.h 2009-01-04 13:43:05 +02:00
Jouni Malinen
2eba45c8de Added endianness annotation for sparse 2009-01-03 21:00:38 +02:00
Jouni Malinen
5306f43fc3 Fixed sparse warnings about integer vs. pointer use
The configuration parsing functions seemed to have worked fine before,
but these were real bugs even if they did not show up in practice.
hostapd_ip_diff() was broken for IPv6 addresses (overwrote address and
always returned 1.
2009-01-03 20:46:32 +02:00
Jouni Malinen
7e5ba1b916 Mark functions static if not used elsewhere and use proper prototypes 2009-01-03 20:38:42 +02:00
Jouni Malinen
26d1dc96e9 Include the header file to validate function prototype. 2009-01-03 20:21:12 +02:00
Jouni Malinen
c5adf528a2 Moved WPS Registrar initialization from EAP peer to wps_supplicant.c
This matches the style used in hostapd, i.e., Registrar is initialized
only once and callbacks are now processed in wps_supplicant.c.
2009-01-03 20:18:35 +02:00
Jouni Malinen
41c00105f2 Removed registrar pointer from wps_config and wps_data
wps_context::registrar can be used as the only location for this
pointer.
2009-01-03 20:09:35 +02:00
Jouni Malinen
5a8c6d3353 Removed duplicated authenticator yes/no from wps_config and wps_data
wps_context::ap is available for this purpose and there is no need to
change between AP and not AP between protocol runs.
2009-01-03 19:57:22 +02:00
Jouni Malinen
ae2633af63 Removed unused WPS_PENDING processing result 2009-01-03 19:52:20 +02:00
Jouni Malinen
f90c86d4a3 Added Doxygen documentation for WPS code 2009-01-03 19:50:49 +02:00
Jouni Malinen
a17df5fb8b Fixed number of doxygen warnings 2009-01-02 22:28:04 +02:00
Jouni Malinen
dd42f95f71 Move addr_un definitions to avoid using out-of-scope buffer 2009-01-02 21:53:21 +02:00
Jouni Malinen
79da74a20c WPS: Generate UUID based on MAC address, if not set
Generate a SHA1 hash -based UUID from the local MAC address if the UUID
was not configured. This makes it easier to prepare for WPS since there
is no need to generate an UUID.
2009-01-01 22:56:52 +02:00
Jouni Malinen
84f5b41fc1 WPS: Cleanup UUID and MAC address configuration
No need to configure these separately for each Enrollee in wps_config
since wps_context is now used both for Registrar and Enrollee.
2009-01-01 22:56:02 +02:00
Jouni Malinen
e834272f73 Include pending MFP defines in nl80211_copy.h
This can be used to get rid of the extra cpp define since we have our
local copy of wireless.h and nl80211.h.
2008-12-31 18:10:14 +02:00
Jouni Malinen
c2fef14520 Sync nl80211.h copy with the current kernel version 2008-12-31 18:00:07 +02:00
Jouni Malinen
ac43f1fa39 Renamed nl80211 HT channel parameters to match with kernel 2008-12-31 17:59:13 +02:00
Jouni Malinen
c3469d1534 MFP: Fix SA Query Action Category
IEEE 802.11w/D7.0 incorrectly changed the Action Category from 8 to 7
when renaming Ping to SA Query. Category 7 is reserved for HT (IEEE
802.11n) and IEEE 802.11w will need to continue to use the category 8
that was allocated for it.
2008-12-31 17:52:05 +02:00
Jouni Malinen
3f732d1fc3 Fix TLS message processing if Flags field is not present
Previous version assumed that the Flags field is always present and
ended up reading one octet past the end of the buffer should the Flags
field be missing. The message length would also be set incorrectly
(size_t)-1 or (size_t)-5, but it looks like reassembly code ended up
failing in malloc before actually using this huge length to read data.

RFC 2716 uses a somewhat unclear description on what exactly is included
in the TLS Ack message ("no data" can refer to either Data field in 4.1
or TLS Data field in 4.2), so in theory, it would be possible for some
implementations to not include Flags field. However,
EAP-{PEAP,TTLS,FAST} need the Flags field in Ack messages, too, for
indicating the used version.

The EAP peer code will now accept the no-Flags case as an Ack message if
EAP workarounds are enabled (which is the default behavior). If
workarounds are disabled, the message without Flags field will be
rejected.

[Bug 292]
2008-12-30 12:28:02 +02:00
Jouni Malinen
98de443890 WPS: Set recommended retransmission times with EAP method specific hint 2008-12-29 18:50:37 +02:00
Jouni Malinen
8e09c6d253 Fixed retransmission of EAP requests if no response is received
It looks like this never survived the move from IEEE 802.1X-2001 to
IEEE 802.1X-2004 and EAP state machine (RFC 4137). The retransmission
scheduling and control is now in EAP authenticator and the
calculateTimeout() producedure is used to determine timeout for
retransmission (either dynamic backoff or value from EAP method hint).

The recommended calculations based on SRTT and RTTVAR (RFC 2988) are not
yet implemented since there is no round-trip time measurement available
yet.

This should make EAP authentication much more robust in environments
where initial packets are lost for any reason. If the EAP method does
not provide a hint on timeout, default schedule of 3, 6, 12, 20, 20, 20,
... seconds will be used.
2008-12-29 18:10:34 +02:00
Jouni Malinen
65d50f0ac6 Add RADIUS server support for identity selection hint (RFC 4284)
Previously, only the delivery option 1 from RFC 4284
(EAP-Request/Identity from the AP) was supported. Now option 3
(subsequent EAP-Request/Identity from RADIUS server) can also be used
when hostapd is used as a RADIUS server. The eap_user file will need to
have a Phase 1 user entry pointing to Identity method in order for this
to happen (e.g., "* Identity" in the end of the file). The identity hint
is configured in the same was as for AP/Authenticator case (eap_message
in hostapd.conf).
2008-12-26 20:22:12 +02:00
Jouni Malinen
ff89afb77b Add Key Length field into IGTK sub-element (FTIE) per 802.11w/D7.0 2008-12-26 12:49:15 +02:00
Jouni Malinen
93b76319f1 Renamed Ping procedure into SA Query procedure per 802.11w/D7.0
This commit changes just the name and Action category per D7.0. The
retransmit/timeout processing in the AP is not yet updated with the
changes in D7.0.
2008-12-26 11:46:21 +02:00
Jouni Malinen
9a9876bf9c Fixed the MFP Status/Reason Code values per 802.11w/D7.0 2008-12-26 11:29:17 +02:00
Jouni Malinen
34cbe7d0b0 WPS: As a workaround, pad zero-length device attributes
Some deployed WPS implementations fail to parse zero-length attributes.
As a workaround, send a null character if the device attribute string is
empty. This allows default values (empty strings) to be used without
interop issues.
2008-12-25 21:19:46 +02:00
Andriy Tkachuk
febc0551c5 WPS: Do not use Selected Registrar Config Methods from scan results
Before this change, it looked like an AP that was using wsccmd did not
get activated since wsccmd left the Selected Registrar Config Methods
attribute to be zero. Since Device Password ID can be used to
distinguish PBC from any other method, use only it to figure out whether
PBC or PIN method is active.
2008-12-25 20:33:00 +02:00
Jouni Malinen
af7837feff Added get_interfaces() handler to list all NDIS adapters 2008-12-24 21:31:14 +02:00
Jouni Malinen
4b4a8ae547 Added a mechanism for quering driver wrappers for available interfaces
The new INTERFACE_LIST global control interface command can be used to
request a list of all available network interfaces that could be used
with the enabled driver wrappers. This could be used to enable
interfaces automatically by external programs (e.g., wpa_gui).
2008-12-24 20:25:19 +02:00
Jouni Malinen
3cf85239bd Mark local functions static. 2008-12-22 22:27:25 +02:00
Jouni Malinen
ac305589a3 Added support for global driver data (shared by multiple interfaces)
Driver wrappers can now register global_init() and global_deinit()
driver_ops handlers to get a global data structure that can be shared
for all interfaces. This allows driver wrappers to initialize some
functionality (e.g., interface monitoring) before any interfaces have
been initialized.
2008-12-22 22:24:31 +02:00
Jouni Malinen
d6e0ce9ac8 Use wildcard UUID when setting AP PIN for Registrar in wpa_supplicant 2008-12-21 17:37:40 +02:00
Jouni Malinen
723763cba0 Fixed NDIS AuthMode configuration for WPS connection 2008-12-21 17:27:32 +02:00
Jouni Malinen
a2b3a34bab IANA allocated EAP method type 51 to EAP-GPSK 2008-12-20 12:39:24 +02:00
Jouni Malinen
ad5302a1ca WPS: Added event callback for successfully completed registration 2008-12-19 22:34:18 +02:00
Jouni Malinen
469fc3a41f WPS: Added callback for failure-after-M2/M2D
This callback is now used to stop wpa_supplicant from trying to continue
using parameters (most likely, device password) that do not work in a
loop. In addition, wpa_gui can now notify user of failed registration.
2008-12-19 22:19:41 +02:00
Jouni Malinen
4b68290e77 WPS: Added event callback and M2D notification
The event callback will be used for various event messages and the M2D
notification is the first such message. It is used to notify wpa_gui
about Registrar not yet knowing the device password (PIN).
2008-12-18 21:58:42 +02:00
Andriy Tkachuk
f086742432 Fix CONFIG_WPS=y, CONFIG_TLS=internal build
crypto_mod_exp() is needed for both EAP-FAST and WPS.
2008-12-18 20:10:18 +02:00
Jouni Malinen
f0477201bd WPS: Fixed deinit code for freeing config and registrar data
We need to be a bit more careful when removing the WPS configuration
block since wpa_s->current_ssid may still be pointing at it. In
addition, registrar pointer in wps_context will need to be cleared
since the context data is now maintained over multiple EAP-WSC runs.
Without this, certain WPS operations could have used freed memory.
2008-12-18 01:06:06 +02:00
Jouni Malinen
a92c421d1a WPS: Improved error processing to use NACK correctly
Instead of sending out EAP-Failure on errors (on AP) or stopping (on
Supplicant), send a NACK message based on the allowed EAP state machine
transitions for EAP-WSC.
2008-12-16 22:37:55 +02:00
Jouni Malinen
ac5953db66 Fixed EAP-AKA build in case EAP-AKA' is disabled 2008-12-16 18:57:49 +02:00
Jouni Malinen
ff8a53a8d7 Use a fixed wps_msg prefix with WPS creds notification 2008-12-15 22:32:45 +02:00
Jouni Malinen
a524f05eb3 WPS: Added control interface notification for available WPS APs
Whenever new scan results include WPS AP(s) and the client is not
associated, send a notification message to control interface monitors.
This makes it easier for GUIs to notify the user about possible WPS
availability without having to go through the scan results.
2008-12-15 20:09:57 +02:00
Jouni Malinen
f4f2774a96 Fixed interoperability issue with PEAPv0 cryptobinding and NPS
Windows Server 2008 NPS gets very confused if the TLS Message Length is
not included in the Phase 1 messages even if fragmentation is not used.
If the TLS Message Length field is not included in ClientHello message,
NPS seems to decide to use the ClientHello data (excluding first six
octets, i.e., EAP header, type, Flags) as the OuterTLVs data in
Cryptobinding Compound_MAC calculation (per PEAPv2; not MS-PEAP)..

Lets add the TLS Message Length to PEAPv0 Phase 1 messages to get rid of
this issue. This seems to fix Cryptobinding issues with NPS and PEAPv0
is now using optional Cryptobinding by default (again) since there are
no known interop issues with it anymore.
2008-12-15 00:15:54 +02:00
Jouni Malinen
000a1de72b Cleaned up EAP-MSCHAPv2 key derivation
Changed peer to derive the full key (both MS-MPPE-Recv-Key and
MS-MPPE-Send-Key for total of 32 octets) to match with server
implementation.

Swapped the order of MPPE keys in MSK derivation since server
MS-MPPE-Recv-Key | MS-MPPE-Send-Key matches with the order specified for
EAP-TLS MSK derivation. This means that PEAPv0 cryptobinding is now
using EAP-MSCHAPv2 MSK as-is for ISK while EAP-FAST will need to swap
the order of the MPPE keys to get ISK in a way that interoperates with
Cisco EAP-FAST implementation.
2008-12-14 13:12:20 +02:00
Jouni Malinen
329a55b314 Ported driver_test to Windows (only UDP socket available) 2008-12-12 22:41:18 +02:00
Jouni Malinen
e33bbd8f4d driver_test: Optional support for using UDP socket
driver_test can now be used either over UNIX domain socket or UDP
socket. This makes it possible to run the test over network and makes it
easier to port driver_test to Windows.

hostapd configuration: test_socket=UDP:<listen port>
wpa_supplicant configuration: driver_param=test_udp=<dst IP addr>:<port>
2008-12-12 21:35:22 +02:00
Jouni Malinen
2ff0f83b9e Comment out dynamic CertEnumCertificatesInStore loading by default
This is now available in MinGW header files, so the loading code is
triggering conflicts.
2008-12-11 00:57:15 +02:00
Jouni Malinen
9e72e1d356 Workaround number of compiler warnings with newer MinGW version 2008-12-11 00:56:37 +02:00
Jouni Malinen
702c349e5e Resolved number of signed/unsigned mismatches and ntddndis.h location 2008-12-11 00:55:33 +02:00
Jouni Malinen
47ce4bfc38 Rename MSG to MESG to avoid conflicts with Windows header files 2008-12-11 00:54:49 +02:00
Jouni Malinen
3ee81d489a Don't include unused calls to SHA256 functions if EAP-AKA' is not enabled 2008-12-11 00:49:39 +02:00
Luis R. Rodriguez
6d1584905c wpa_supplicant: Add support for setting of a regulatory domain
This adds support for setting of a regulatory domain to wpa_supplicant
drivers. It also adds regulatory domain setting for the nl80211 driver.
We expect an ISO / IEC 3166 alpha2 in the wpa configuration file as a
global.
2008-12-09 22:11:14 +02:00
Jouni Malinen
7e45830ab7 nl80211: Include copy of linux/nl80211.h with hostapd/wpa_supplicant
This makes it easier to build the packages and allows all new features
to be built into the binary regardless of which kernel is currently
used.
2008-12-08 11:04:13 +02:00
Jouni Malinen
9478eaef53 Added option to force SoH version 1 (tnc=soh1)
The default version with tnc=soh remains to be 2 which is the currently
recommended version in SoH specification.
2008-12-07 21:00:42 +02:00
Jouni Malinen
a9d1364c5f Merged EAP-AKA' into eap_aka.c and added it to defconfig/ChangeLog 2008-12-07 19:24:56 +02:00
Jouni Malinen
01b0569437 Added protection against EAP-AKA' -> EAP-AKA bidding down attacks
AT_BIDDING attribute is included in EAP-AKA/Challenge to allow peer to
know whether the server would have preferred EAP-AKA'.
2008-12-05 22:25:47 +02:00
Jouni Malinen
8de5048e26 Fixed a typo in a comment 2008-12-04 22:15:51 +02:00
Jouni Malinen
a478ef0d12 EAP-AKA': Added CK',IK' derivation
This is based on a change request 3GPP TS 33.402 CR 0033 for version
8.1.1. The hardcoded ANID is now 'WLAN' since that is used in
3GPP TS 24.302.
2008-12-04 21:50:56 +02:00
Jouni Malinen
a49c428a1b EAP-AKA': Comment out EAP-AKA' server KDF negotiation
Since only one KDF is currently supported, the negotiation is not
allowed and peer must be rejected if it tries to send KDF selection in a
Challenge message. The negotiation code is left in the file and just
commented out since it was tested to work and can be used in the future
if another KDF is added.
2008-12-04 20:32:56 +02:00
Jouni Malinen
6ec4021c03 EAP-AKA': Added processing of AT_KDF and AT_KDF_INPUT attributes
Network Name is not yet generated and validated based on 3GPP.33.402
(i.e., a hardcoded string is used in server and anything is accepted in
peer).
2008-12-04 20:29:46 +02:00
Jouni Malinen
b8ab624984 Fixed EAP-SIM and EAP-AKA AT_IDENTITY parsing (server only)
The attribute uses 'Actual Identity Length' field to indicate the exact
(pre-padding) length of the Identity. This actual length should be used
as the length, not the remaining attribute length.

This was previously worked around by stripping null termination away
from the end of the identity string at EAP-SIM and EAP-AKA server code.
However, it is likely that that workaround is not really needed and the
real problem was in AT_IDENTITY parsing. Anyway, the workaround is left
in just in case it was really needed with some implementations.
2008-12-04 18:51:42 +02:00
Jouni Malinen
15828ba820 Made 802.11 management frame IE parser aware of vendor HT Capab IE
This IE is not (at least yet) actually used for anything, but parsing it
cleans up verbose debug log a bit since thie previously unknown, but
commonly used, vendor IE was being reported as unknown.
2008-12-04 13:42:33 +02:00
Jouni Malinen
73d48dc4b4 EAP-AKA': Allow both AKA AKA' to be registed from eap_aka_prime.c
This allows the same source code file to be shared for both methods. For
now, this is only in eap_aka_prime.c, but eventually, changes in
eap_aka_prime.c are likely to be merged into eap_aka.c at which point
the separate eap_aka_prime.c can be removed.
2008-12-03 19:59:52 +02:00
Jouni Malinen
9881795e2c EAP-AKA': Derive keys using the new KDF (PRF') 2008-12-03 19:22:20 +02:00
Jouni Malinen
806f869918 EAP-AKA': Use HMAC-SHA-256-128 for AT_MAC 2008-12-02 21:29:26 +02:00
Jouni Malinen
f54e2c34bf EAP-AKA': Use SHA256 for AT_CHECKCODE 2008-12-02 21:05:38 +02:00
Jouni Malinen
f09d19d46a Use a variable to store EAP method type for EAP-AKA vs. EAP-AKA'
This makes it easier to eventually replace EAP-AKA implementation with a
shared implementation that supports both EAP-AKA and EAP-AKA'.
2008-12-02 20:27:05 +02:00
Jouni Malinen
8c37556cd1 Add a starting point for EAP-AKA' (draft-arkko-eap-aka-kdf-10)
This is just making an as-is copy of EAP-AKA server and peer
implementation into a new file and by using the different EAP method
type that is allocated for EAP-AKA' (50). None of the other differences
between EAP-AKA and EAP-AKA' are not yet included.

It is likely that once EAP-AKA' implementation is done and is found to
work correctly, large part of the EAP-AKA and EAP-AKA' code will be
shared. However, it is not reasonable to destabilize EAP-AKA
implementation at this point before it is clearer what the final
differences will be.
2008-12-02 20:12:49 +02:00
Jouni Malinen
08bec36178 WPS: Added support for wildcard PINs that work with any UUID-E
Since the Registrar may not yet know the UUID-E when a new PIN is
entered, use of a wildcard PIN that works with any UUID-E can be useful.
Such a PIN will be bound to the first Enrollee trying to use it and it
will be invalidated after the first use.
2008-11-30 20:32:03 +02:00
Jouni Malinen
79d7d8efe7 WPS: Added more verbose debug info on authentication type mismatch 2008-11-30 19:56:11 +02:00
Jouni Malinen
351f09a221 WPS: Added support for fragmented WPS IE in Beacon and Probe Response
Fragment WPS IE if needed to fit into the IE length limits in hostapd
and Reassemble WPS IE data from multiple IEs in wpa_supplicant.

In addition, moved WPS code from events.c into wps_supplicant.c to clean
up module interfaces.
2008-11-29 22:06:34 +02:00
Jouni Malinen
23f53f2a81 WPS: Get AP PIN from configuration instead of using hardcoded value 2008-11-29 21:07:35 +02:00
Jouni Malinen
e05716d0b0 WPS: Added helper functions for generating and validating PINs 2008-11-29 14:02:09 +02:00
Jouni Malinen
b01c18a8ef WPS: Set Request Type properly into WPS IE in ProbeReq/AssocReq 2008-11-29 13:38:03 +02:00
Jouni Malinen
b8a8c299c8 WPS: Moved WPS IE building for ProbeReq/AssocReq into wps.c
These functions fit in better with the category of functions included in
wps.c. wps_common.c is now used for generic helper functions (currently,
only crypto code).
2008-11-29 13:21:28 +02:00
Jouni Malinen
7d7b8e960a WPS: Split wps_common.c into parts
To make it easier to find various functions, attribute functions were
split into wps_attr_{build,parse,process}.c.
2008-11-29 13:16:26 +02:00
Jouni Malinen
120bd30c34 WPS: Moved RF Bands processing into wps_dev_attr.c
This allows the RF Bands attribute to be configured and stored.
2008-11-29 12:59:43 +02:00
Jouni Malinen
c0d041d9a7 WPS: Moved ProbeReq/AssocReq WPS IE building into wps_common.c
This code and the related attributes are not specific to Enrollee
functionality, so wps_common.c is the correct location for them.
2008-11-29 12:44:02 +02:00
Jouni Malinen
7d7c918d97 WPS: Pass device data into wps_enrollee_build_probe_req_ie()
Use configured device data instead of hardcoded values to generate WPS
IE for Probe Request.
2008-11-29 12:19:30 +02:00
Jouni Malinen
eb76b7e3ff WPS: Parse Request Type from WPS IE in (Re)AssocReq and derive mgmt keys
WPS IE is now passed from hostapd association processing into EAP-WSC
and WPS processing. Request Type attribute is parsed from this
information and if the request is for a WLAN Manager Registrar,
additional management keys are derived (to be used with UPnP).
2008-11-29 12:11:56 +02:00
Jouni Malinen
e9ab39b444 WPS: Added comments for main data structures 2008-11-28 20:50:08 +02:00
Jouni Malinen
398cfbf6be WPS: Moved mac_addr and uuid configuration into wps_context
There is no need to complicate EAPOL and EAP interfaces with WPS
specific parameters now that wps_context is passed through.
2008-11-28 20:44:47 +02:00
Jouni Malinen
116654ce24 WPS: Moved wps_context initialization into wps_supplicant.c
The wps_context data is now managed at wpa_supplicant, not EAP-WSC. This
makes wpa_supplicant design for WPS match with hostapd one and also
makes it easier configure whatever parameters and callbacks are needed
for WPS.
2008-11-28 20:32:13 +02:00
Jouni Malinen
bcbbc7af45 WPS: Merged two cred_cb variables into the same one
Previously, wpa_supplicant as Enrollee case was handled using a
different callback function pointer. However, now that the wps_context
structure is allocated for all cases, the same variable can be used in
all cases.
2008-11-28 20:02:32 +02:00
Jouni Malinen
ff434cbdda WPS: Moved device attributes into wps_context::dev for Enrollee case
Previously, hardcoded values were used in wps_enrollee.c. These are now
moved into shared data in struct wps_context. In case of
AP/Authenticator, these are initialized in wps_hostapd.c. In case of
client/supplicant, these are now initialized in EAP-WSC peer method,
but will probably end up being moved into higher layer for better
configuration.
 EAP-WSC peer method for
2008-11-28 19:29:22 +02:00
Jouni Malinen
9d695f3dd0 WPS: Update supplicant configuration when acting as an external Registrar
This allows the network to be used after the Registrar configuration
step. The local WPS network is replaced with a new network block
similarly to the case of acting as an Enrollee.
2008-11-27 21:23:43 +02:00
Jouni Malinen
3f42d42c07 WPS: Moved Credential building to use struct wps_credential
This makes it easier to store old AP settings into wps->cred (and allow
them to modified and taken into use in the future). Separation between
Credential and AP Settings building is also cleaner in this design.
2008-11-27 21:14:39 +02:00
Jouni Malinen
96a2ed9f50 WPS: Process old AP Settings in M7 when registering as external Registrar
The old (i.e., currently used) AP Settings are processed. For now, they
are copied as-is into M8 as new AP Settings to avoid changing
configuration. This should be changed to allow external programs (e.g.,
GUI) to fetch the old AP settings over ctrl_iface and then allow
settings to be changed before sending M8 with the new settings.
2008-11-27 20:32:39 +02:00
Jouni Malinen
fced73755f WPS: Moved Credential and AP Settings processing in common code
The core processing of attributes into struct wps_credential is now in
wps_common.c (was in wps_enrollee.c), so that the same code can be
shared with Registrar.
2008-11-27 20:15:48 +02:00
Jouni Malinen
82c39bf10f Fixed a typo in a debug message 2008-11-27 19:38:52 +02:00
Jouni Malinen
76603ad4c8 WPS: Added parsing of Request Type and Response Type attributes 2008-11-26 21:00:27 +02:00
Jouni Malinen
f855f923a7 WPS: Moved UUID configuration from phase1 into global config area 2008-11-26 20:47:24 +02:00
Jouni Malinen
6dcfad915f PEAPv0: Added support for IPMK/CMK derivation in session resumption case 2008-11-26 13:27:40 +02:00
Jouni Malinen
a8d8410e1f Added support for configuring secondary channel offset for HT40 2008-11-24 16:33:45 +02:00
Jouni Malinen
fc14f56759 Added IEEE 802.11n HT capability configuration (ht_capab) 2008-11-24 15:44:25 +02:00
Jouni Malinen
ba4dc6be9e Updated HT Capabilities Info field names to match with 802.11n/D7.0 2008-11-24 15:08:02 +02:00
Jouni Malinen
191a8ad794 Use SSL_F_SSL_SET_SESSION_TICKET_EXT instead of OPENSSL_VERSION_NUMBER
to figure out whether to use the new session ticket override API with
OpenSSL.
2008-11-23 21:14:43 +02:00
Jouni Malinen
d268507aa0 Reject GPSK-3 if ID_Server in it does not match with the value in GPSK-1 2008-11-23 20:06:13 +02:00
Jouni Malinen
afc7a7ad3c Add a .gitignore for the new wps directory. 2008-11-23 19:40:37 +02:00
Jouni Malinen
ad08c3633c Added preliminary Wi-Fi Protected Setup (WPS) implementation
This adds WPS support for both hostapd and wpa_supplicant. Both programs
can be configured to act as WPS Enrollee and Registrar. Both PBC and PIN
methods are supported.

Currently, hostapd has more complete configuration option for WPS
parameters and wpa_supplicant configuration style will likely change in
the future. External Registrars are not yet supported in hostapd or
wpa_supplicant. While wpa_supplicant has initial support for acting as
an Registrar to configure an AP, this is still using number of hardcoded
parameters which will need to be made configurable for proper operation.
2008-11-23 19:34:26 +02:00
Jouni Malinen
4dcfc4a5ae Preparations for 0.6.6 release 2008-11-23 17:00:52 +02:00
Jouni Malinen
a532c108bd Add more verbose debug output for GSM-Milenage use (RAND,SRES,Kc) 2008-11-22 14:06:58 +02:00
Jouni Malinen
1ac2d4a9ee Fixed canceling of PMKSA caching with driver generated RSN IE
It looks like some Windows NDIS drivers (e.g., Intel) do not clear the
PMKID list even when wpa_supplicant explicitly sets the list to be
empty. In such a case, the driver ends up trying to use PMKSA caching
with the AP and wpa_supplicant may not have the PMK that would be needed
to complete 4-way handshake.

RSN processing already had some code for aborting PMKSA caching by
sending EAPOL-Start. However, this was not triggered in this particular
case where the driver generates the RSN IE. With this change, this case
is included, too, and the failed PMKSA caching attempt is cleanly
canceled and wpa_supplicant can fall back to full EAP authentication.
2008-11-21 15:31:25 +02:00
Jouni Malinen
012783f1ab Fixed EAP-TLS message fragmentation for the last TLS message
It the message was large enough to require fragmentation (e.g., if a large
Session Ticket data is included), More Fragment flag was set, but no
more fragments were actually sent (i.e., Access-Accept was sent out).
2008-11-20 19:39:35 +02:00
Jouni Malinen
f32fe71a1f Fixed Milenage debug output to use correct length for IK and CK 2008-11-20 15:45:31 +02:00
Jouni Malinen
6cd4f02b03 Fixed EAPA-AKA warning message about AT_RES length to use bits 2008-11-20 15:23:51 +02:00
Jouni Malinen
c31a11c962 Changed PEAPv0 cryptobinding to be disabled by default
There are some interoperability issues with Windows Server 2008 NPS, so
better disable cryptobinding use by default for now.
2008-11-20 12:49:34 +02:00
Jouni Malinen
bd1d13c199 Fixed size_t printf format for 64-bit builds 2008-11-19 21:21:34 +02:00
Jouke Witteveen
ea6380e7c9 Fixed a bug in read -> _read cleanup; one missed change 2008-11-19 21:20:24 +02:00
Jouni Malinen
2d981c2fd0 EAP-PEAP: Copy Binding nonce from cryptobinding request to reply
It looks like [MS-PEAP] 3.2.5.6 points towards this being the expected
behavior (however, that chapter is very confusing).

In addition, remove Cryptobinding TLV from response if the received
Cryptobinding TLV is not valid. Add some more debug messages to the case
where the received Cryptobinding TLV is found invalid.
2008-11-19 19:25:14 +02:00
Carolin Latze
98842d51ec Separate OpenSSL engine configuration for Phase 2
I fixed the engine issue in phase2 of EAP-TTLS. The problem was that you
only defined one engine variable, which was read already in phase1. I
defined some new variables:

engine2
engine2_id
pin2

and added support to read those in phase2 wheres all the engine
variables without number are only read in phase1. That solved it and I
am now able to use an engine also in EAP-TTLS phase2.
2008-11-18 16:53:32 +02:00
Jouni Malinen
9ef21b2fef roboswitch: Minor coding style cleanup 2008-11-18 16:35:08 +02:00
Jouke Witteveen
e519314ee9 Add RoboSwitch driver interface for wpa_supplicant
Find attached the patch that creates a new driver: roboswitch. This
driver adds support for wired authentication with a Broadcom
RoboSwitch chipset. For example it is now possible to do wired
authentication with a Linksys WRT54G router running OpenWRT.

LIMITATIONS
- At the moment the driver does not support the BCM5365 series (though
adding it requires just some register tweaks).
- The driver is also limited to Linux (this is a far more technical
restriction).
- In order to compile against a 2.4 series you need to edit
include/linux/mii.h and change all references to "u16" in "__u16". I
have submitted a patch upstream that will fix this in a future version
of the 2.4 kernel. [These modifications (and more) are now included in
the kernel source and can be found in versions 2.4.37-rc2 and up.]

USAGE
- Usage is similar to the wired driver. Choose the interfacename of
the vlan that contains your desired authentication port on the router.
This name must be formatted as <interface>.<vlan>, which is the
default on all systems I know.
2008-11-18 16:30:32 +02:00
Jouni Malinen
cd35db9fef Updated userspace MLME instructions for current mac80211
Remove the old code from driver_wext.c since the private ioctl interface is
never going to be used with mac80211. driver_nl80211.c has an
implementation than can be used with mac80211 (with two external patches to
enable userspace MLME configuration are still required, though).
2008-11-18 15:45:25 +02:00
Jouni Malinen
0cf03892a4 OpenSSL 0.9.9 API change for EAP-FAST session ticket overriding API
Updated OpenSSL code for EAP-FAST to use an updated version of the
session ticket overriding API that was included into the upstream
OpenSSL 0.9.9 tree on 2008-11-15 (no additional OpenSSL patch is
needed with that version anymore).
2008-11-16 21:29:12 +02:00
Jouni Malinen
ea251b4a23 EAP-FAST: Reorder TLVs in PAC Acknowledgment to fix interop issues
It looks like ACS did not like PAC Acknowledgment TLV before Result TLV, so
reorder the TLVs to match the order shown in a
draft-cam-winget-eap-fast-provisioning-09.txt example. This allows
authenticated provisioning to be terminated with Access-Accept (if ACS has
that option enabled). Previously, provisioning was otherwise successful,
but the server rejected connection due to not understanding the PAC Ack
("Invalid TEAP Data recieved").
2008-11-16 11:10:29 +02:00
Jouni Malinen
6982784e20 EAP-SIM/AKA: fixed initialization to verify PIN even if identity is set
Previously, hardcoded identity in the network configuration skipped both
IMSI reading and PIN verification. This broke cases where PIN is needed for
GSM/UMTS authentication. Now, only IMSI reading is skipped if identity is
hardcoded.
2008-11-07 20:09:44 +02:00
Jouni Malinen
04a5bad682 EAP-AKA: Validate RES Length field in AT_RES
This change breaks interoperability with older wpa_supplicant versions
(everything up to and including wpa_supplicant 0.5.10 and 0.6.5) which
incorrectly used this field as number of bytes, not bits, in RES.
2008-11-07 08:34:07 +02:00
Jouni Malinen
fa71a1d84a Fixed EAP-AKA RES Length field in AT_RES as length in bits, not bytes 2008-11-07 08:30:34 +02:00
Jouni Malinen
36100718de EAP-FAST server: allow expired PAC for PAC refresh
Instead of falling back to full TLS handshake on expired PAC, allow the
PAC to be used to allow a PAC update with some level of server
authentication (i.e., do not fall back to full TLS handshake since we
cannot be sure that the peer would be able to validate server certificate
now). However, reject the authentication since the PAC was not valid
anymore. Peer can connect again with the newly provisioned PAC after this.
2008-11-06 22:57:09 +02:00
Jouni Malinen
39452b4deb EAP-FAST: Include Tunnel PAC request only after EAP authentication 2008-11-06 21:07:53 +02:00
Jouni Malinen
581a8cde77 Added support for enforcing frequent PTK rekeying
Added a new configuration option, wpa_ptk_rekey, that can be used to
enforce frequent PTK rekeying, e.g., to mitigate some attacks against TKIP
deficiencies. This can be set either by the Authenticator (to initiate
periodic 4-way handshake to rekey PTK) or by the Supplicant (to request
Authenticator to rekey PTK).

With both wpa_ptk_rekey and wpa_group_rekey (in hostapd) set to 600, TKIP
keys will not be used for more than 10 minutes which may make some attacks
against TKIP more difficult to implement.
2008-11-06 19:57:21 +02:00
Jouni Malinen
81eec387dd Added Milenage-GSM simulator for EAP-SIM
CONFIG_SIM_SIMULATOR=y in .config and password="Ki:OPc" in network config
to enable.
2008-11-06 04:21:32 +02:00
Jouni Malinen
31cbe002c9 driver_ndis: Added a workaround for a driver that removes SSID IE in scan
A driver was found to remove SSID IE from NDIS_WLAN_BSSID_EX IEs, but the
correct SSID is included in NDIS_802_11_SSID structure inside the BSSID
data. If this is seen in scan results, create a matching SSID IE and add it
to the end of IEs to fix scan result parsing.
2008-11-05 23:44:26 +02:00
Jouni Malinen
2a24bb3199 Added Milenage USIM emulator for EAP-AKA (can be used to simulate test
USIM card with a known private key; enable with CONFIG_USIM_SIMULATOR in
.config and password="Ki:OPc:SQN" in network configuration).
2008-11-05 23:02:13 +02:00
Jouni Malinen
988ab690ac Preparations for 0.6.5 release 2008-11-01 17:20:25 +02:00
Jouni Malinen
ac987fb7de Fixed fwrite error path in eap_fast_write_pac not to free buf
Caller expects the buffer to be allocated on error, so eap_fast_write_pac()
must be consistent with its behavior on error paths.
2008-11-01 17:09:28 +02:00
Jouni Malinen
1add3c3387 Use the common ieee802_11_parse_elems() implementations for mlme.c 2008-10-29 21:57:01 +02:00
Jouni Malinen
cb7b04c8c9 Moved ieee802_11_parse_elems() into common code 2008-10-29 21:48:14 +02:00
Jouni Malinen
308a4ec81a Verify fread(), fwrite(), and system() return values
These were starting to trigger compiler warning with recent glibc header
files and gcc.
2008-10-29 19:33:24 +02:00
Jouni Malinen
dd20838a7d Fixed size_t printf format for 64-bit targets 2008-10-29 19:30:23 +02:00
Jouni Malinen
8e8df25541 nl80211: Finish dumps properly (ported from iw.git) 2008-10-29 19:28:35 +02:00
Jouni Malinen
114622c021 Fixed EAPOL skip for PMKSA caching case to remain in authenticated state
Need to make sure that portValid is TRUE in order to avoid PAE state
machine going into DISCONNECTED state on eapol_sm_step(). This could be
triggered at least with OKC.
2008-10-25 20:21:31 +03:00
Jouni Malinen
244e07c54d EAP-FAST peer: Fixed not to add PAC Request in PAC Acknowledgement message 2008-10-19 10:02:57 +03:00
Jouni Malinen
2d86724409 EAP-FAST: Allow A-ID and A-ID-Info to be configured separately
Changed EAP-FAST configuration to use separate fields for A-ID and
A-ID-Info (eap_fast_a_id_info) to allow A-ID to be set to a fixed
16-octet len binary value for better interoperability with some peer
implementations; eap_fast_a_id is now configured as a hex string.
2008-10-19 09:55:59 +03:00
Jouni Malinen
a11c90a64a EAP-FAST: Make PAC-Key lifetime values configurable
The hardcoded values in eap_fast.c were replaced with values read from
hostapd.conf.
2008-10-08 17:25:47 +03:00
Jouni Malinen
378eae5e9b EAP-FAST: Added support for disabling anonymous/authenticated provisioning
eap_fast_prov config parameter can now be used to enable/disable different
EAP-FAST provisioning modes:
0 = provisioning disabled
1 = only anonymous provisioning allowed
2 = only authenticated provisioning allowed
3 = both provisioning modes allowed
2008-10-08 16:55:23 +03:00
Jouni Malinen
f36f51e403 Change the order of Result TLV and PAC TLV to avoid interop issues
draft-cam-winget-eap-fast-provisioning-06.txt or RFC 4851 do not seem to
mandate any particular order for TLVs, but some interop issues were noticed
with an EAP-FAST peer implementation when Result TLV followed PAC TLV. The
example in draft-cam-winget-eap-fast-provisioning-06.txt shows the TLVs in
the other order, so change the order here, too, to make it less likely to
hit this type of interop issues.
2008-10-08 15:50:01 +03:00
Jouni Malinen
3b7c9aa6aa Updated the comment on MS-Packet-Info mismatch based on [MS-SOH] info 2008-10-02 20:26:00 +03:00
Jouni Malinen
b43f7c34d2 SoH: Add null termination for empty url in MS-Quarantine-State. 2008-10-02 20:22:17 +03:00
Jouni Malinen
c908a9e5ae SoH: Add all the mandatory attributes into SSoH vendor specific attribute
This adds all the attributes that are marked as mandatory for SoH in
IF-TNCCS-SOH v1.0. MS-Machine-Inventory does not contain correct data
(i.e., all version fields are just marked as inapplicable) and
MS-MachineName is hardcoded to wpa_supplicant@w1.fi for now.
2008-10-02 19:34:22 +03:00
Jouni Malinen
75cf93d2c5 Fixed EAP-FAST peer not to add double Result TLV when ACKing PAC 2008-10-02 17:38:13 +03:00
Jouni Malinen
b6310a6f47 NDIS: Set authMode=WPA2, if needed, when flushing PMKID cache
Some drivers may refuse OID_802_11_PMKID if authMode is not set to WPA2,
so let's set it temporarily, if needed, when flushing PMKID cache.
2008-10-02 16:25:41 +03:00
Jouni Malinen
2e8c9a27f5 Fixed a typo 2008-10-02 12:40:24 +03:00
Jouni Malinen
510c02d4a3 Fixed EAP-TTLS server to verify eap_ttls_phase2_eap_init() return code
It is possible that the initialization of the Phase 2 EAP method fails and
if that happens, we need to stop EAP-TTLS server from trying to continue
using the uninitialized EAP method. Otherwise, the server could trigger
a segmentation fault when dereferencing a NULL pointer.
2008-10-01 13:55:04 +03:00
Jouni Malinen
6241fcb165 nl80211: clean up netlink code
This is a port of commit cafe38cae0
from Johannes Berg <johannes@sipsolutions.net> for hostapd to
wpa_supplicant driver_nl80211.c.
2008-09-30 16:46:22 +03:00
Jouni Malinen
38fa763405 Added set_mode() handler for privsep 2008-09-29 17:09:26 +03:00
Jouni Malinen
147bdb3f9c Fixed build without CONFIG_CLIENT_MLME 2008-09-29 16:59:51 +03:00
Dan Williams
ec5f180a24 Add an optional set_mode() driver_ops handler for setting mode before keys
A bug just got reported as a result of this for mac80211 drivers.

https://bugzilla.redhat.com/show_bug.cgi?id=459399

The basic problem is that since taking the device down clears the keys
from the driver on many mac80211-based cards, and since the mode gets
set _after_ the keys have been set in the driver, the keys get cleared
on a mode switch and the resulting association is wrong.  The report is
about ad-hoc mode specifically, but this could happen when switching
from adhoc back to managed mode.
2008-09-29 16:45:49 +03:00
Jouni Malinen
36b5e559f1 Validate WEXT event iwe->u.data.length before using the event data
This is needed to avoid crashing wpa_supplicant with invalid event messages
that may be received when using 64-bit kernel with 32-bit userspace.
2008-09-27 10:49:56 +03:00
Jouni Malinen
fa2ec7eb63 Silenced compiler warnings on size_t printf format and shadowed variables 2008-09-27 10:46:06 +03:00
Jouni Malinen
b27f13ed28 MFP + FT: Added support for sending IGTK in FTIE 2008-09-01 11:00:59 +03:00
Jouni Malinen
565861976d Added support for using SHA256-based stronger key derivation for WPA2
IEEE 802.11w/D6.0 defines new AKMPs to indicate SHA256-based algorithms for
key derivation (and AES-CMAC for EAPOL-Key MIC). Add support for using new
AKMPs and clean up AKMP processing with helper functions in defs.h.
2008-08-31 22:57:28 +03:00
Jouni Malinen
c2a714088d Moved WMM action category definition into ieee802_11_defs.h 2008-08-31 11:06:58 +03:00
Jouni Malinen
5d22a1d5aa IEEE 802.11w: Added association ping
This updates management frame protection to use the assocition ping process
from the latest draft (D6.0) to protect against unauthenticated
authenticate or (re)associate frames dropping association.
2008-08-31 11:04:47 +03:00
Jouni Malinen
0b60b0aaad Updated MFP defines based on IEEE 802.11w/D6.0 and use new MFPC/MFPR
This adds most of the new frame format and identifier definitions from IEEE
802.11w/D6.0. In addition, the RSN IE capability field values for MFP is
replaced with the new two-bit version with MFPC (capable) and MFPR
(required) processing.
2008-08-30 14:59:39 +03:00
Jouni Malinen
fd630bc183 Fixed WEXT scan result parser to not crash on invalid IEs (zero len buffer)
If IWEVGENIE or custom event wpa_ie/rsn_ie is received in scan with empty
buffer, the previous version ended up calling realloc(NULL, 0) which seems
to return a non-NULL value in some cases. When this return value is passed
again into realloc with realloc(ptr, 0), the returned value could be NULL.
If the ptr is then freed (os_free(data.ie) in SIOCGIWAP handling), glibc
may crash due to invalid pointer being freed (or double-freed?). The
non-NULL realloc(NULL, 0) return value from glibc looks a bit odd behavior,
but anyway, better avoid this case completely and just skip the IE events
that have an empty buffer.

This issue should not show up with drivers that produce proper scan results
since the IEs will always include the two-octet header. However, it seems
to be possible to see this when using 64-bit kernel and 32-bit userspace
with incorrect compat-ioctl processing.
2008-08-27 09:52:16 +03:00
Jouni Malinen
4d4233eaf4 Fixed internal TLSv1 server implementation for abbreviated handshake
When the TLS handshake had been completed earlier by the server in case of
abbreviated handshake, the output buffer length was left uninitialized. It
must be initialized to zero in this case. This code is used by EAP-FAST
server and the uninitialized length could have caused it to try to send a
very large frame (though, this would be terminated by the 50 roundtrip EAP
limit). This broke EAP-FAST server code in some cases when PAC was used to
establish the tunnel.
2008-08-24 13:08:15 +03:00
Jouni Malinen
1f21bc4cc3 Fixed EAP-FAST server PAC-Opaque padding
0.6.4 broke this for some peer identity lengths. The padding was supposed
to make sure that the length of PAC-Opaque is divisible by 8.
2008-08-24 12:50:12 +03:00
Jouni Malinen
f40b972690 HT: Removed unused definitions 2008-08-22 21:07:07 +03:00
Tomas Winkler
71b6ae1425 Add Intel copyright for files with 802.11n Intel changes
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
2008-08-22 09:15:05 +03:00
Jouni Malinen
de9289c8e9 Add preliminary IEEE 802.11n support into hostapd
This commit brings in cleaned up version of IEEE 802.11n implementation
from Intel (1). The Intel tarball includes number of other changes, too,
and only the changes specific to IEEE 802.11n are brought in here. In
addition, this does not include all the changes (e.g., some of the
configuration parameters are still missing and driver wrapper changes for
mac80211 were not included).

(1)
http://www.kernel.org/pub/linux/kernel/people/chuyee/wireless/iwl4965_ap/hostap_0_6_0_intel_0.0.13.1.tgz
2008-08-21 18:18:38 +03:00
Jouni Malinen
3c83f19c80 Added mlme_{add,remove}_sta() for userspace MLME
These functions are based on the hostapd implementation and complete
the userspace MLME code in wpa_supplicant (though, mac80211 will still need
couple of pending patches to be integrated in order to get userspace client
MLME working again).
2008-08-18 22:01:04 +03:00
Jouni Malinen
1d8ce433c9 Internal X.509/TLSv1: Support SHA-256 in X.509 certificate digest 2008-08-16 11:21:22 +03:00
Jouni Malinen
a9141cffb0 Updated EAP-TTLSv0 references to use RFC 5281 2008-08-16 10:17:22 +03:00
Jouni Malinen
1c8735848d nl80211: Preliminary code for usermode MLME support
This adds some parts needed to use usermode MLME with the current mac80211
(plus a patch to add a new cfg80211 command; not yet submitted to
wireless-testing). This version creates a monitor interface for management
frames and is able to send Probe Request frames during scan. However, it
looks like management frame reception is not yet working properly. In
addition, mlme_{add,remove}_sta() handlers are still missing.
2008-08-15 22:14:49 +03:00
Jouni Malinen
7524cfb1a3 nl80211: Fixed re-initialization of removed and re-inserted interface
Network device ifindex will change when the interface is re-inserted.
driver_nl80211.c will need to accept netlink events from "unknown" (based
on ifindex) interfaces when a previously used card was removed earlier. If
the previously removed interface is added back, the driver_wext data need
to be updated to match with the new ifindex value. In addition, the initial
setup tasks for the card (set interface up, update ifindex, set mode, etc.)
from wpa_driver_nl80211_init() need to be run again.

This is the changes from commit 3fbda8f943
(driver_wext.c) ported for driver_nl80211.c.
2008-08-15 17:55:16 +03:00
Jouni Malinen
0a4e6cbf88 nl80211: Fixed set_mode() to actually use adhoc/station nl80211 variables 2008-08-15 17:52:37 +03:00
Jouni Malinen
c1e033b0bb IEEE Std 802.11r-2008 has been released, so update references 2008-08-15 11:25:24 +03:00
Jouni Malinen
d48ae45b73 Preparations for 0.6.4 release 2008-08-10 20:33:12 +03:00
Jouni Malinen
6724f4d07a Fixed MinGW build without CONFIG_NDIS_EVENTS_INTEGRATED defined 2008-08-10 18:11:41 +03:00
Jouni Malinen
ccb172ed75 Renamed MSG to PROC_MSG to avoid conflicts with MinGW winuser.h 2008-08-10 18:00:11 +03:00
Jouni Malinen
3ff77e070d Fixed opportunistic key caching (OKC)
wpa_sm_set_config() can be called even if the network block does not
change. However, the previous version ended up calling
pmksa_cache_notify_reconfig() every time and this cleared the network
context from PMKSA cache entries. This prevented OKC from ever being used.

Do not call pmksa_cache_notify_reconfig() if the network context remains
unchanged to allow OKC to be used.
2008-08-03 20:16:59 +03:00
Jouni Malinen
3fbda8f943 WEXT: Fixed re-initialization of removed and re-inserted interface
Network device ifindex will change when the interface is re-inserted.
driver_wext.c will need to accept netlink events from "unknown" (based on
ifindex) interfaces when a previously used card was removed earlier. If the
previously removed interface is added back, the driver_wext data need to be
updated to match with the new ifindex value. In addition, the initial setup
tasks for the card (set interface up, update ifindex, set mode, etc.) from
wpa_driver_wext_init() need to be run again.
2008-07-25 01:30:53 +03:00
Jouni Malinen
6652b61cd4 Fixed EAP-TNC not to include extra EAP header and TNC flags
The change to support fragmentation added extra function to generate the
EAP header, but forgot to remove the original code and ended up getting two
EAP headers and TNC flags field in the generated message. These header
fields need to be added only in the function that builds the final message
(and if necessary, fragments the data).
2008-07-17 02:17:37 +03:00
Dan Williams
93ef879f0f wext: fix maxrate calculation
When scan results got moved from wpa_scan_result -> wpa_scan_res, the
'maxrate' member was dropped from wpa_scan_res.  The D-Bus interface
used 'maxrate', which was replaced with wpa_scan_get_max_rate().
Unfortunately, wpa_scan_get_max_rate() returns 802.11 rate values
directly from the IE, where 'maxrate' was the rate in bits/second.  The
supplicant internally fakes an IE for wpa_scan_res from the value of
wpa_scan_result->maxrate, but interprets ->maxrate as an 802.11 rate
index.

As a side-effect, this fixes a soft-break of the D-Bus control API since
the wpa_scan_res change was introduced.
2008-07-15 20:07:50 +03:00
Jouni Malinen
6e33ca4529 Fixed wpa_scan_get_max_rate() to clear the basicrate flag when determining
the highest rate.
2008-07-15 20:05:50 +03:00
Michael Bernhard
886a807fb5 Make proactive key caching working again
Function 'wpa_sm_set_config' used the argument 'config' as the network
context which is a pointer to a local variable of the function
'wpa_supplicant_rsn_supp_set_config'.

This is one reason why no proactive key was generated. This network
context never matched with the network context saved in the pmksa cache
entries.

The structure 'rsn_supp_config' has already a member 'network_ctx' which
is now filled in by this patch with 'ssid'.

Signed-off-by: Michael Bernhard <michael.bernhard@bfh.ch>
2008-07-06 10:50:53 +03:00
Jouni Malinen
089165e6a4 Added temporary #ifdef WEXT_MFP_PENDING around the MFP changes
Just in case, do not use the not-yet-approved WEXT changes even if someone
where to build wpa_supplicant with IEEE 802.11w support unless this new
macro has been defined explicitly.
2008-06-18 11:18:26 +03:00
Jouni Malinen
f0732adfe0 WEXT: IEEE 802.11w/MFP configuration
Added configuration of MFP related parameters with WEXT. The changes to
linux/wireless.h have not yet been applied to the Linux kernel tree, so the
code using them is still open to changes and is ifdef'ed out if
CONFIG_IEEE80211W is not set.
2008-06-18 11:13:33 +03:00
Masakazu Mokuno
84737a46a4 Add support for the driver which do 4-way handshake
Add the support for the Linux wireless drivers which want to do
4-way handshake and need to know the PSK before the handshake.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
2008-06-18 11:09:00 +03:00
Masakazu Mokuno
e0f775b2a4 Add the flags for the drivers which do 4-way handshake
Add the new flags which are supposed to be included in Linux 2.6.27
for the drivers which want to do 4-way handshake and to know PMK.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
2008-06-18 11:03:18 +03:00
Jouni Malinen
3e2ad1b932 Fixed race condition between disassociation event and group key handshake
This avoids getting stuck in state where wpa_supplicant has canceled scans,
but the driver is actually in disassociated state. The previously used code
that controlled scan timeout from WPA module is not really needed anymore
(and has not been needed for past four years since authentication timeout
was separated from scan request timeout), so this can simply be removed to
resolved the race condition. As an extra bonus, this simplifies the
interface to WPA module.
[Bug 261]
2008-06-09 16:26:47 +03:00
Jouni Malinen
2eeaa5c9d0 EAP-PEAP: Moved the common peap_prfplus() function into a shared file 2008-06-09 10:32:12 +03:00
Jouni Malinen
3f5285e852 Added a preliminary nl80211/cfg80211 driver interface for wpa_supplicant
driver_nl80211.c is based on driver_wext.c and it is still using Linux
wireless extensions for many functions. Over time, the new driver interface
code should be modified to use nl80211/cfg80211 for everything.
2008-06-06 16:55:42 +03:00
Pavel Roskin
f3833aee90 Fix compile warnings on 64-bit systems
Don't cast pointers to int in definitions of PRISM2_HOSTAPD_RID_HDR_LEN
and PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN.  Use size_t instead.  That's
actually what the code needs.
2008-06-06 14:17:03 +03:00
Jouni Malinen
ad844747ca Updated the LibTomMath reference to use 0.41 version 2008-06-06 10:32:09 +03:00
Jouni Malinen
b95394c66f Combined internal LibTomMath configuration into one option
CONFIG_INTERNAL_LIBTOMMATH_FAST=y in .config can now be used to enable all
optimized routines at a cost of about 4 kB. This is small enough increase
in size to justify simplified configuration.
2008-06-06 10:21:28 +03:00
Jouni Malinen
ec0205a87a Added an option to build internal LibTomMath with faster div routine
At the cost of about 1 kB of additional binary size, the internal
LibTomMath can be configured to include faster div routine to speed up DH
and RSA. This can be enabled with CONFIG_INTERNAL_LIBTOMMATH_FAST_DIV=y in
.config.
2008-06-06 10:11:17 +03:00
Jouni Malinen
b6ab429402 Read Michael MIC keys through TK2 union instead of offset from TK1
This gets rid of potential warnings about buffer bounds errors. The earlier
code works fine, but it is not the cleanest way of using the struct wpa_ptk
definition for TK1/TK2.
2008-06-05 21:00:56 +03:00
Jouni Malinen
7cdeb81e1f Fixed potential NULL pointer dereference if memory allocation fails 2008-06-05 20:44:30 +03:00
Jouni Malinen
815c5e1435 Fixed RADIUS client local address forcing for IPv6 (eapol_test)
Need to use the IPv6 address data in bind() call if IPv6 is selected.
2008-06-05 20:33:33 +03:00
Jouni Malinen
c5f5c91aeb Add faster, optional sqr routine for internal LibTomMath
At the cost of about 0.5 kB of additional binary size, the internal
LibTomMath can be configured to include faster sqr routine to speed up DH
and RSA. This can be enabled with CONFIG_INTERNAL_LIBTOMMATH_FAST_SQR=y in
.config.
2008-06-05 18:33:46 +03:00
Jouni Malinen
4fba48a5a7 Silence compiler warnings about out of array bounds indexes
struct wpa_ie_hdr had separate fields for 24-bit OUI and 8-bit oui_type
for WPA/RSN selectors. {WPA,RSN}_SELECTOR_{GET,PUT} access these four
octets through oui and the "out-of-bounds" access for the fourth octet is
actually reading/writing oui_type. This works fine, but some tools complain
about the array bounds "failure". Since oui_type is never accessed
separately, the simplest fix is to just combine these into a single 4-octet
field.
2008-06-05 17:50:53 +03:00
Dan Williams
59c9707863 wext: handle mode switches correctly for mac80211
Since mac80211 requires that the device be !IFF_UP to change the mode
(and I think the old prism54 fullmac driver does too), do that.  This
shouldn't harm fullmac devices since they can handle mode switches on
the fly and usually don't care about up/down that much.
2008-06-04 20:55:57 +03:00
Jouni Malinen
87114163b7 Updated the comments since Montgomery reduction is now included 2008-06-04 11:59:45 +03:00
Jouni Malinen
8ccc0402b2 Internal LibTomMath: add optional support for Montgomery reduction
Add a cost of about 2.5 kB of additional cost, the internal LibTomMath can
be configured to include fast exptmod routine to speed up DH and RSA.
This can be enabled with CONFIG_INTERNAL_LIBTOMMATH_FAST_EXPTMOD=y in
.config.
2008-06-04 11:57:55 +03:00
Jouni Malinen
0527710dd3 Reduce integrated LibTomMath size by dropping negative exponent support
Current uses do not require support for negative exponent in exptmod, so we
can save about 1.5 kB in leaving out invmod.
2008-06-04 11:26:52 +03:00
Jouni Malinen
a8e16edc86 Introduced new helper function is_zero_ether_addr()
Use this inline function to replace os_memcmp(addr,
"\x00\x00\x00\x00\x00\x00", ETH_ALEN) == 0.
2008-06-03 18:08:48 +03:00
Dan Williams
7e1488494e Do not continually reschedule specific scans to help finding hidden SSIDs
In situations where the driver does background scanning and sends a
steady stream of scan results, wpa_supplicant would continually
reschedule the scan.  This resulted in specific SSID scans never
happening for a hidden AP, and the supplicant never connecting to the AP
because it never got found.  Instead, if there's an already scheduled
scan, and a request comes in to reschedule it, and there are enabled
scan_ssid=1 network blocks, let the scan happen anyway so the hidden
SSID has a chance to be found.
2008-06-03 11:37:48 +03:00
Dan Williams
2e5a7b49a0 wext: don't overwrite BSS frequency
mac80211 sends _both_ channel and frequency in it's scan results, with
frequency first and channel second (it's since been fixed to send
channel first and frequency second to work around this issue).  This
results in wpa_supplicant getting the right value when the frequency
comes, but overwriting the value with '0' when the channel comes because
wpa_supplicant can't handle 5GHz channel numbers.  So if a valid
previous SIOCGIWFREQ event came in, don't try to overwrite it.
2008-06-02 20:47:09 +03:00
Jouni Malinen
d952d16df4 Internal TLS: Added support for parsing PKCS #8 formatted private keys
The internal TLS implementation can now use both PKCS #1 RSA private key
and PKCS #8 encapsulated RSA private key. PKCS #8 encrypted private key is
not yet supported.
2008-06-02 19:39:46 +03:00
Jouni Malinen
bf206cada3 Changed TLS server to use OpenSSL SSL_accept() instead of SSL_read()
The server handshake processing was still using SSL_read() to get OpenSSL
to perform the handshake. While this works for most cases, it caused some
issues for re-authentication. This is now changed to use SSL_accept() which
is more approriate here since we know that the handshake is still going on
and there will not be any tunneled data available. This resolves some of
the re-authentication issues and makes it possible for the server to notice
if TLS processing fails (SSL_read() did not return an error in many of
these cases while SSL_accept() does).

Set session id context to a unique value in order to avoid fatal errors
when client tries session resumption (SSL_set_session_id_context() must be
called for that to work), but disable session resumption with the unique
value for the time being since not all server side code is ready for it yet
(e.g., EAP-TTLS needs special Phase 2 processing when using abbreviated
handshake).

Changed EAP-TLS server not to call TLS library when processing the final
ACK (empty data) from the client in order to avoid starting a new TLS
handshake with SSL_accept().
2008-05-29 20:36:18 +03:00
Jouni Malinen
3c99fa29d3 Add eap_tls_state() to get closer to EAP-TTLS/PEAP/FAST code 2008-05-28 17:19:57 +03:00
Jouni Malinen
cda97d11bb Share EAP-TLS/PEAP/TTLS/FAST core process() functionality
Move the basic processing of received frames into eap_tls_common.c and use
callback functions to handle EAP type specific processing of the version
field and payload.
2008-05-28 17:15:17 +03:00
Jouni Malinen
3c724cc564 Do not refer to Flags::Version field as 'PEAP version'
This field is also used for EAP-TTLS and EAP-FAST, so it is clearer to use
a more generic term for it.
2008-05-28 09:59:55 +03:00
Jouni Malinen
34f564dbd5 Redesigned EAP-TLS/PEAP/TTLS/FAST fragmentation/reassembly
Fragmentation is now done as a separate step to clean up the design and to
allow the same code to be used in both Phase 1 and Phase 2. This adds
support for fragmenting EAP-PEAP/TTLS/FAST Phase 2 (tunneled) data.
2008-05-28 09:57:17 +03:00
Jouni Malinen
ab17e3f2b7 Fixed EAP-IKEv2 server fragment processing
Need to clear the state back to MSG after having processed all incoming
fragments. Without this, the server got stuck in sending the fragment ACK
even after having received the full message.
2008-05-26 16:51:40 +03:00
Jouni Malinen
ef626b4d50 Added a workaround for handling TLS compression
Even though we try to disable TLS compression, it is possible that this
cannot be done with all TLS libraries. For example, OpenSSL 0.9.8 does not
seem to have a configuration item for disabling all compression (0.9.9 has
such an option). If compression is used, Phase 2 decryption may end up
producing more data than the input buffer due to compressed data. This
shows up especially with EAP-TNC that uses very compressible data format.

As a workaround, increase the decryption buffer length to (orig_len+500)*3.
This is a hack, but at least it handles most cases. TLS compression should
really be disabled for EAP use of TLS, but since this can show up with
common setups, it is better to handle this case.
2008-05-26 12:33:04 +03:00
Jouni Malinen
e572cb6398 Do not define tls_engine_get_cert() if OpenSSL engine is disabled 2008-05-26 12:04:35 +03:00
Jouni Malinen
1b52ea47e4 Added fragmentation support for EAP-TNC 2008-05-26 12:00:18 +03:00
David Smith
d1f73353bc Add support to eap_peer for client cert and CA cert on smartcard and in
phase2 auth.
2008-05-23 10:52:49 +03:00
David Smith
e59c91af82 Add support to crypto/tls for client cert and CA cert from smartcard 2008-05-23 10:49:59 +03:00
Jouni Malinen
fca25ef4b4 Only use SSL_OP_NO_COMPRESSION if it is defined
It looks like this SSL_set_options() value was added in 0.9.9 and it does
not exist in stable releases of OpenSSL. Fix build by using #ifdef on this
variable before use.
2008-05-21 10:10:10 +03:00
Jouni Malinen
1f358437d3 Disable TLS compression since the EAP-TTLS/PEAP/FAST payload processing
does not support it currently and EAP-TLS RFC does not allow compression to
be negotiated for TLS.
2008-05-15 16:48:44 +03:00
Jouni Malinen
579313ab07 Fixed xsi:schemaLocation to use whitespace to separate members of the pair. 2008-05-06 21:29:14 +03:00
Jouni Malinen
1c156e783d Fixed tls_prf() to handle keys with odd length
The middle byte of the secret (key for PRF) is shared with key halfs in
case the key length is odd. This does not happen in any of the current
tls_prf() uses, but it's better to fix this function to avoid future issues
should someone end up defining a use that uses an odd length for the key.
2008-04-14 20:11:49 +03:00
Jouni Malinen
0146165170 TNC: Added preliminary code for IF-TNCCS-SOH client side support
Process SoH Request in SoH EAP Extension method and reply with SoH TLV. The
contents of SSoH is not yet complete (i.e., some of the required attributes
are still missing). Use of SoH is disabled by default; it can be enabled
with tnc=soh in phase1 parameter for PEAP.
2008-04-08 16:15:56 +03:00
Jouni Malinen
d6888f9e37 PEAPv0: Added crypto_binding configuration option (part of phase1)
crypto_binding=# in phase1 network parameter can now be used to change the
PEAPv0 cryptobinding behavior (0 = do not use, 1 = optional (default),
2 = required).
2008-04-08 14:57:39 +03:00
Pavel Roskin
8738e4fc55 driver_wext: Fix missing bracket in [DORMANT]
Signed-off-by: Pavel Roskin <proski@gnu.org>
2008-04-07 10:09:37 +03:00
Tomasz Wolniewicz
c454f57379 eapol_test: Allow client IP address to be specified
Allow the user to set the IP address of the eapol_test client. This if
very useful when you have a machine with many interfaces and want to use a
particular one for testing RADIUS connectivity. For instance when I run the
national eduroam proxy I can only connect to other server from a particular
address, an our machine happens to have several IPs. So if I want to run
connectivity tests, I must make sure that my test uses a particular
interface. The -A option allows one to set this).

(jm: cleaned up to use radius configuration structure instead of global
variable for the address and added IPv6 support)
2008-03-30 18:15:52 +03:00
Tomasz Wolniewicz
1e4b9da10c Chargeable-User-Identity (RFC 4372) in eapol_test
Implements the Chargable-User-Identity (CUI), as defined in RFC 4372.
Option "-i" causes the eapol_test to send a NUL CUI - which is a request to
send a CUI back. Capital "-I" allows to specify the value of the CUI.
This has been defined for cases where the client wants to reauthenticate.
2008-03-30 17:39:19 +03:00
Jouni Malinen
1c2ff04f3a TNC: Added preliminary code for IF-TNCCS-SOH server side support
If TNC is enabled, PEAPv0 server is now sending out SoH request to initiate
IF-TNCCS-SOH (Microsoft NAP / Statement of Health) handshake. The results
are currently only shown in debug log and they do not affect authentication
or authorization result.
2008-03-30 17:10:44 +03:00
Jouni Malinen
30680e9332 EAP-TTLS: Fixed implicit challenge derivation to use correct output length
The previous version was deriving unnecessarily large amount of output data
for the implicit challenge. With the TLS PRF, this was not causing any
problems because the output length is not explicitly bound into the
derivation. Anyway, it is better to use the correct output length should
the PRF be ever changed to a one that uses the output length to change the
beginning of the output data.
2008-03-23 12:07:59 +02:00
Jouni Malinen
e7d8003358 EAP-PEAP: Fixed interop issues in key derivation with cryptobinding
It looks like Microsoft implementation does not match with their
specification as far as PRF+ label usage is concerned.. IPMK|CMK is derived
without null termination on the label, but the label for CSK derivation
must be null terminated.

This allows cryptobinding to be used with PEAPv0 in a way that
interoperates with Windows XP SP3 (RC2) and as such, this functionality is
now enabled as an optional addition to PEAPv0.
2008-03-19 16:58:06 +02:00
Jouni Malinen
32f049b2af EAP-PEAP: Swap MS-CHAP-v2 MPPE keys for EAP-PEAP ISK derivation
Microsoft uses reverse order for MS-MPPE keys in EAP-PEAP when compared to
EAP-FAST derivation of ISK. Swap the keys here to get the correct ISK for
EAP-PEAPv0 cryptobinding. This resolves the cryptobinding interop issue
with WinXP SP3 RC2. However, it looks like MSK derivation does not
interoperate when using cryptobinding, so this code remains disabled for
the time being.
2008-03-18 16:27:55 +02:00
Jouni Malinen
e1a69a0b10 EAP-PEAP: Added preliminary code for PEAPv0 and PEAPv2 cryptobinding
This implementation is complete for PEAPv0 (Microsoft extension), but the
use of cryptobinding is disabled in this version, i.e., this does not
change protocol behavior at all.

Interop tests between hostapd and wpa_supplicant work fine, but there are
some problems in getting hostapd to interoperate with Windows XP SP3 RC2
(peer replies with Result Failure to the attempted cryptobinding). The
implementation will remain disabled until this issue has been resolved.
2008-03-18 12:19:52 +02:00
Jouni Malinen
0ac0e4df1c EAP-PEAP: Moved EAP-TLV processing into eap_peap.c
EAP-PEAP was the only method that used the external eap_tlv.c peer
implementation. This worked fine just for the simple protected result
notification, but extending the TLV support for cryptobinding etc. is not
trivial with such separation. With the TLV processing integrated into
eap_peap.c, all the needed information is now available for using
additional TLVs.
2008-03-18 11:26:17 +02:00
Jouni Malinen
06726f0bdd EAP-PEAP: Moved EAP-TLV processing into eap_peap.c
EAP-PEAP was the only method that used the external eap_tlv.c server
implementation. This worked fine just for the simple protected result
notification, but extending the TLV support for cryptobinding etc. is not
trivial with such separation. With the TLV processing integrated into
eap_peap.c, all the needed information is now available for using
additional TLVs.
2008-03-18 08:31:04 +02:00
Jouni Malinen
a865bd5031 Some cleanup for the new driver wrapper for PS3
wpa_printf() does not use '\n'. Fixed set_wpa_key() to allocate buf for
ASCII passphrase case.
2008-03-13 19:05:45 +02:00
Masakazu Mokuno
b5a357b476 Add support for PS3 Linux wireless driver
This adds support for PS3 wireless to wpa_supplicant.

Although PS3 wireless driver is designed to conform the WEXT standard
as much as possible, unfortunately the wext driver wrapper of
wpa_supplicant can not support PS3 wireless fully because:

 - PS3 wireless driver uses private WEXT ioctls for accepting PSK of
   WPA-Personal from the userland.
   WEXT does not specify the way to do it.

 - The association and 4-way handshake are done by PS3 virtual
   wireless device. The guest OSes can not interfere it.

 - No EAPOL frames are allowed to go outside of the
   hypervisor/firmware nor come from. They are eaten by the firmware.

Thus I needed to make a new driver wrapper for PS3 wireless.

This patch can be applied against the latest 0.6.x tree.

Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp>
2008-03-13 19:00:37 +02:00
Jouni Malinen
658d166297 FT: Use correct BSSID when deriving PTK and verifying MIC
The old version was using struct wpa_sm::bssid which is not necessarily
updated to point to the correct target address when doing over-the-air FT
since the address is used before the association has actually been
completed.
2008-03-12 11:20:20 +02:00
Jouni Malinen
58a98fb027 Delete PTK SA on (re)association if this is not part of a Fast BSS
Transition. This fixes a potential issue where an incorrectly behaving AP
could send a group key update using the old (now invalid after reassociate)
PTK. This could also happen if there is a race condition between reporting
received EAPOL frames and association events.
2008-03-12 11:18:57 +02:00
Jouni Malinen
ccfab35a6a Silence gcc 4.3.0 warnings about invalid array indexes 2008-03-12 09:33:18 +02:00
Jouni Malinen
c80a74d70c TNC: Integrated TNC support into EAP-TTLS server
If TNC is enabled, EAP-TTLS will run a second EAP (TNC) inside the tunnel
after a successful authentication.
2008-03-09 12:05:06 +02:00
Jouni Malinen
35f39ac4c9 TNC: Fixed TNC when using EAP-TTLS with non-EAP Phase 2
Need to process EAP AVP after the non-EAP Phase 2 method. In addition,
EAP-TTLS/MSCHAPv2 needs special code for handling the starting of TNC after
extra roundtrip of MSCHAPv2 success message.
2008-03-09 12:04:10 +02:00
Jouni Malinen
7db0fca522 TNC: Integrated TNC support into EAP-FAST server
Tunneled EAP sequence is now used to perform both the authentication (e.g.,
using EAP-GTC) and TNC validation (EAP-TNC) inside the EAP-FAST tunnel if
TNC has been enabled.
2008-03-09 11:22:17 +02:00
Jouni Malinen
4f1c561725 TNC: Added support for using TNC with EAP-FAST 2008-03-09 11:21:01 +02:00
Jouni Malinen
c3e258ae9f TNC: Provide 'tnc' configuration option for EAP server and methods 2008-03-09 10:42:53 +02:00
Jouni Malinen
da08a7c732 TNC: Added preliminary TNC implementation for hostapd
This adds EAP-TNC method and TNCS (IF-IMV and IF-TNCCS) functionality.
There is no integration with EAP-TTLS and EAP-FAST at this point, so this
version is not yet suitable for real use (i.e., EAP-TNC can only be tested
outside a tunnel which is not an allowed configuration for deployment).
However, the basic TNCS functionality is more or less complete and this
version seems to interoperate with wpa_supplicant.
2008-03-09 10:37:18 +02:00
Jouni Malinen
13b3f33942 EAP-FAST: Verify that identity from PAC-Opaque matches with Phase 2 (GTC) 2008-02-27 18:00:12 -08:00
Jouni Malinen
7914585fe0 EAP-FAST: Cleaned up TLV processing and added support for EAP Sequences
Number of TLVs were processed in groups and these cases were now separated
into more flexible processing of one TLV at the time. wpabuf_concat()
function was added to make it easier to concatenate TLVs. EAP Sequences are
now supported in both server and peer code, but the server side is not
enabled by default.
2008-02-27 17:59:34 -08:00
Jouni Malinen
2bab8ae401 EAP-FAST: Define and use EAP_FAST_CMK_LEN 2008-02-27 17:58:46 -08:00
Jouni Malinen
ed5a02fd94 Removed extra '_' from struct eap_tlv_crypto_binding__tlv name 2008-02-27 17:58:13 -08:00
Jouni Malinen
cdd1bc9288 EAP-FAST: Divided eap_fast_process() into number of helper functions 2008-02-27 17:57:49 -08:00
Jouni Malinen
7f4c1d4300 EAP-FAST: Moved common peer/server functionality into a shared file 2008-02-27 17:57:19 -08:00
Jouni Malinen
a4819630f6 EAP-FAST: Added shared helper functions for building TLVs 2008-02-27 17:56:30 -08:00
Jouni Malinen
829f14be17 EAP-FAST: Add peer identity into EAP-FAST PAC-Opaque
This allows Phase 2 Identity Request to be skipped if the identity is
already known from PAC-Opaque received in TLS handshake in order to save
one roundtrip from normal authentication.
2008-02-27 17:55:40 -08:00
Jouni Malinen
b0194fe07e Added max_listen_interval configuration option
This allows associations to be denied if the STA tries to use too large
listen interval. The default value is 65535 which matches with the field
size limits.
2008-02-27 17:54:06 -08:00
Jouni Malinen
4d6c3de3df driver_ralink: Make sure assoc_{req,resp}_ies do not get double-freed 2008-02-27 17:53:22 -08:00
Jouni Malinen
5e77500c4f driver_ralink: Use os_strlcpy instead of os_strncpy to ensure null
termination
2008-02-27 17:52:43 -08:00
Jouni Malinen
d04cbdd640 driver_ralink: Fixed couple of memory leaks on error path 2008-02-27 17:52:05 -08:00
Jouni Malinen
a6ee047fcb Verify that os_get_time() does not fail before using the time value when
registering an eloop timeout.
2008-02-27 17:50:36 -08:00
Jouni Malinen
72822e7be4 Fixed base64_decode() reject empty input buffers 2008-02-27 17:49:59 -08:00
Jouni Malinen
380da72b80 Enforce non-zero MPPE key length 2008-02-27 17:49:24 -08:00
Jouni Malinen
6076f6ce08 Silence SIOCSIWAUTH ioctl failure message.
These are expected in most cases and there is no need to confuse users
with the messages in stderr (perror was used here). These are now only
shown in debug output and EOPNOTSUPP errors are silently ignored.
2008-02-27 17:47:23 -08:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00