Return value of crypto_bignum_to_bin() wasn't always checked, resulting
in potential access to uninitialized values. Fix it, as some analyzers
complain about it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Micha Hashkes <micha.hashkes@intel.com>
Fix an issue that results in TX failures being stored where TX retries
belongs.
Fixes: ad4fa5dd3c ("Add more nl80211 info to struct wpa_signal_info")
Signed-off-by: David Ruth <druth@chromium.org>
k_pad and tk were not cleared in internal HMAC-SHA256 implementation.
Clear them to avoid leaving secret material in temporary stack
variables.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
DEFINE_STACK_OF() was only introduced in OpenSSL 1.1.0 and newer, but
the ifdef directive that wrapped it was wrongly removed when cleaning
some BoringSSL definitions. Use ifdef confistently for defining and
using AttrOrOID.
Fixes: faf9c04cb5 ("Remove a host of unnecessary OPENSSL_IS_BORINGSSL ifdefs")
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Extend the SAE-EXT-KEY testing to also cover GCMP-256.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Use more specific status code values to report error cases.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
RSNXE bits were modified, so update the relevant places accordingly.
Please note, WLAN_RSNX_CAPAB_PROT_RANGE_NEG was renamed to
WLAN_RSNX_CAPAB_URNM_MFPR and the bit position is changed to 15 instead
of 10, while BIT 10 is used for WLAN_RSNX_CAPAB_URNM_MFPR_X20 and is not
supported yet.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Add the assigned values based on IEEE P802.11-REVme/D2.0. In addition,
sort these definitions in ascending order.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Check the HE membership selector and don't use the BSS
if required but not supported by HW.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Add the ability to require HE, advertising that via the
BSS membership selector as well as rejecting association
without HE.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
When AP is started on a DFS channel and DFS is offloaded to the driver,
AP setup will be separated to two stages. In the first stage, hostapd
will set frequency and initialize BSS, then waits the driver CAC to
complete. Once CAC done, in the second stage,
hostapd_setup_interface_complete() will be called again from a callback
to continue AP/channel setup.
But the driver will fail to restart AP if it is disabled/reenabled
during a driver CAC procedure because some steps such as setting
freq/beacon in the first stage are skipped due to cac_started not
cleared when the AP is disabled.
Avoid this by clearing cac_started when the AP is disabled.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Channel width in HE Capabilities element added to management frames is
calculated in hostapd_eid_he_capab() by intersecting the driver
capabilities and the operating channel width. Kernel uses this value
from the Beacon frames to verify EHT capabilities length. However, EHT
MCS length calculation uses only the driver capabilities which results
in EHT AP bring up failure in some cases dues to different lengths.
Modify the EHT code to use the HE operating channel width as well to
determine matching length for the information.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Add support to handle external authentication request with a different
SAE AKM suite compared to the current connection AKM suite. This is
needed to support cross AKM roaming between SAE and SAE-EXT-KEY AKM
suites.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
PASN deauthentication event is sent by the underlying driver to delete
the keys in wpa_supplicant PTKSA cache. So don't send clear secure
context command to the driver again as it is already aware of it.
Fixes: 74d894a2 ("PASN: Offload handshake for multiple peers from the driver")
Signed-off-by: Vinay Gannevaram <quic_vganneva@quicinc.com>
Add new attributes for the destination MAC address and netdev index in
SCS rule config subcommand.
Signed-off-by: Harsh Kumar Bijlani<quic_hbijlani@quicinc.com>
Though not explicitely forced by IEEE 802.11be draft yet, it makes sense
to apply the same logic for MLD as for 6 GHz BSSs. Change
wpa_supplicant_ssid_bss_match() accordingly.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
With an MLD connection the BSSID reported in the association
event is the MLD AP address, while the association state reported
in the scan results relates to the MLD AP specific link. In such a
case do not disconnect.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
MAX_NUM_MLD_LINKS is 15, thus u8 isn't enough for the bitmap. Fix it.
While at it, clean MLO information better.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Define additional association parameters for MLD to be able to indicate
information for all the requested links and fill these into nl80211
attributes.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Set MLO attributes for NL80211_CMD_AUTHENTICATE and make sure that MLD
configuration is preserved between authentication retries.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Add the required ML and RNR definitions and report the information in
BSS command.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
The control fields are 16 bit wide. Combine the per byte definitions to
make it more convenient.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Allows informing the connection manager of additional information on CQM
events. Allows the connection manager to request the same information
on demand by using the existing "SignalPoll" method.
* Add new property "SignalChange"
* Add storage for wpa_signal_info into wpa_supplicant context
object
* Copy memory from event to context object on CQM Event
* Write a common conversion method to be used by both "SignalPoll" and
this property
Signed-off-by: David Ruth <druth@chromium.org>
Facilitate emitting more station information over D-Bus for use by the
connection manager.
* Add storage for more NL80211_STA_INFO_* fields to data structures, and
move them through the system.
* Reorder NL80211_STA_INFO_* fields in driver_nl80211.c to match the
ordering in nl80211.h.
* Convert signal field to an integer to support holding WPA_INVALID_NOISE
and avoid changing logging.
* Add fields to hostap_sta_driver_data to capture more information
* fcs_error_count
* beacon_loss_count
* expected_throughput
* rx_drop_misc
* rx_mpdus
* rx_hemcs
* tx_hemcs
* rx_he_nss
* tx_he_nss
* avg_signal
* avg_beacon_signal
* avg_ack_signal
* Add struct hostap_sta_driver_data to struct wpa_signal_info and remove
redundant fields and redundant attribute parsing
* Change logging when printing txrate to handle unsigned long
value
Signed-off-by: David Ruth <druth@chromium.org>
Indicate whether the collocated BSS in the RNR is a part of a multiple
BSSID set and whether it is a transmited BSSID.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add test cases for MBSSID functionality with EMA.
Add helper functions to create the configuration file, start hostapd
instance and client association with the transmitting interface.
he_ap_mbssid_open: 4 VAPs with open security in multiple BSSID
configuration. The first interface transmits beacons and probe responses
which include the multiple BSSID element(s) with remaining profiles.
he_ap_mbssid_same_security: 2 VAPs, all with SAE. In such a case the
Multiple BSSID elements in management frames do not include RSN and RSNE
elements as all non-transmitting profiles have exact same security
configuration as the transmitting interface.
he_ap_mbssid_mixed_security{1,2}: 8 VAPs with mixed security
configurations (SAE, OWE, WPA2-PSK, open). he_ap_mbssid_mixed_security1:
Transmitting interface uses SAE. In this case the non-transmitting
profiles will include non inheritance element (IEEE Std 802.11-2020,
9.4.2.240) wherever the security differs from the transmitting profile.
he_ap_mbssid_mixed_security2: Transmitting profile is open hence no need
for the non inheritance elements. Instead each non-transmitting profile
includes RSN, RSNE if applicable.
he_ap_ema: Enhanced multi-BSS advertisements (EMA) with 8 VAPs all with
SAE configuration.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Send MBSSID and EMA configuration parameters to the kernel.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
As described in IEEE Std 802.11-2020, 11.1.3.8 Multiple BSSID procedure,
set the lowest AID value assigned to any client equal to 2^n, where n is
the maximum BSSID indicator of the MBSSID set.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Process the Known BSSID elements if included by non-AP stations. The
format is described in IEEE Std 802.11ax-2021, 9.4.2.261.
Non-AP stations may include this element in directed Probe Request
frames to indicate which of the multiple BSSIDs they have already
discovered. AP should exclude these profiles from the Probe Response
frame.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Add Multiple BSSID Configuration element data per IEEE Std
802.11ax-2021, 9.4.2.260 when enhanced multiple BSSID advertisement
(EMA) is enabled. This element informs the stations about the EMA
profile periodicity of the multiple BSSID set.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Set extended capabilities as described in IEEE Std 802.11ax-2021,
9.4.2.26. Reset the capability bits to 0 explicitly if MBSSID and/or EMA
is not enabled because otherwise some client devices fail to associate.
Bit 80 (complete list of non-tx profiles) is set for all Probe Response
frames, but for Beacon frames it is set only if EMA is disabled or if
EMA profile periodicity is 1.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Add helper functions to retrieve the context for the transmitting
interfaces of the MBSSID set and the index of a given BSS.
Set device parameters: BSS index and the transmitting BSS.
Include Multiple BSSID elements in Beacon and Probe Response frames.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Add data per IEEE Std 802.11-2020, 9.4.2.240. Current implementation is
added for the security and extended supported rates only.
For the Extended rates element, add a new member 'xrates_supported'
which is set to 1 only if hostapd_eid_ext_supp_rates() returns success.
Without this change, there are cases where this function returns before
adding the element for the transmitting interface resulting in incorrect
addition of this element inside the MBSSID Non-Inheritance element.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Co-developed-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Signed-off-by: Sowmiya Sree Elavalagan <quic_ssreeela@quicinc.com>
Add Multiple BSSID element data per IEEE Std 802.11ax-2021, 9.4.2.45.
Split the BSSes into multiple elements if the data does not fit in
the 255 bytes allowed for a single element.
Store the total count of elements created and the offset to the start
of each element in the provided buffer.
Set the DTIM periods of non-transmitted profiles equal to the EMA
profile periodicity if those are not a multiple of the latter already as
recommended in IEEE Std 802.11ax-2021, Annex AA (Multiple BSSID
configuration examples).
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
When multiple BSSID advertisement feature is enabled in IEEE 802.11ax
mode or later, Beacon frames are not transmitted per interface, instead
only one of the interfaces transmits Beacon frames that include one or
more Multiple BSSID elements with configuration for the remaining
interfaces on the same radio.
Change the existing logic such that all configuration details for all
the interfaces are available while building the Beacon frame template
for the transmitting interface itself.
Do not change the flow for the cases where multiple BSSID advertisement
is not enabled.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Retrieve driver capabilities for the maximum number of interfaces for
MBSSID and the maximum allowed profile periodicity for enhanced MBSSID
advertisement.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Add configuration option 'mbssid' used to enable multiple BSSID (MBSSID)
and enhanced multiple BSSID advertisements (EMA) features.
Reject the configuration if any of the BSSes have hidden SSID enabled.
Signed-off-by: Aloka Dixit <quic_alokad@quicinc.com>
Co-developed-by: John Crispin <john@phrozen.org>
Signed-off-by: John Crispin <john@phrozen.org>
Add a testing option to delay EAPOL-Key messages 1/4 and 3/4. By setting
delay_eapol_tx=1, the actual EAPOL Tx will occur on the last possible
attempt (wpa_pairwise_update_count) thus all previous attempts will fail
on timeout which is the wanted delay.
In addition, add an hwsim test that uses this testing option to verify
that non protected Robust Action frames are dropped prior to keys
installation in MFP.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Since wpa_supplicant can change MAC address of the interface on its own
(with randomization enabled) it makes sense to introduce MACAddress as a
property of the interface and send notifications about its change.
This allows other applications to just use D-Bus instead of both
communicating over D-Bus with wpa_supplicant and listening to Netlink
notifications for MAC changes.
Signed-off-by: Andrzej Ostruszka <amo@semihalf.com>
Include the start of the next EAP method in an EAP Payload TLV in the
same message with the Crypto-Binding TLV for the previous EAP method to
get rid of one roundtrip when using more than a single EAP
authentication method within the tunnel. The previous, not optimized,
sequence can still be used with eap_teap_method_sequence=1 for more
complete testing coverage.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
When using the optimized EAP method sequence within the tunnel, crypto
binding for the previous EAP method can be performed in the same message
with the start of the next EAP method. The Crypto-Binding TLV needs to
be processed before moving to the next EAP method for IMSK to be derived
correctly, so swap the order of these processing steps.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
While RFC 7170 does not describe this, EAP-TEAP has been deployed with
implementations that use the EAP-FAST-MSCHAPv2, instead of the
EAP-MSCHAPv2, way of deriving the MSK for IMSK. Use that design here to
interoperate with other implementations since that seems to be direction
that IETF EMU WG is likely to go with an RFC 7170 update.
This breaks interoperability with earlier hostapd/wpa_supplicant
versions.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
EAP-FAST uses a special variant of EAP-MSHCAPv2 called EAP-FAST-MSCHAPv2
in RFC 5422. The only difference between that and EAP-MSCHAPv2 is in how
the MSK is derived. While this was supposed to be specific to EAP-FAST,
the same design has ended up getting deployed with EAP-TEAP as well.
Move this special handling into EAP-MSCHAPv2 implementation so that it
can be shared for both needs.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
With the UHB enabled, the number of scanned frequencies may exceed
the buffer size. Increase it.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Add a basic test to verify AP selection algorithm with EHT AP.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Add support to consider EHT rates while calculating the estimated
throughput for scan results.
- The estimated EHT throughput uses the HE 0.8 usec GI rates from the
relevant EHT-MCS tables from IEEE P802.11be/D2.0, 36.5.
- The minimum SNR values for EHT rates (4096-QAM) are derived by adding
the existing minimum SNR values of 1024-QAM rates from HE tables and
the difference between the values of minimum sensitivity levels of
1024-QAM rates and 4096-QAM rates defined in Table 36-67 (Receiver
minimum input level sensitivity) in IEEE P802.11be/D2.0.
Signed-off-by: Ayala Beker <ayala.beker@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
