Commit graph

15862 commits

Author SHA1 Message Date
Jouni Malinen
07e69dfb05 tests: Secure mesh with BIP-GMAC-128, BIP-GMAC-256, and BIP-CMAC-256
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-25 23:56:16 +02:00
Jouni Malinen
9b391715cb mesh: Allow group management cipher to be configured
This allows BIP-GMAC-128, BIP-GMAC-256, or BIP-CMAC-256 to be used
instead of the previously hardcoded AES-128-CMAC as the group management
cipher when using mesh with PMF. For now, this can be configured by
setting a single group_mgmt value in the network block and doing that
consistently through all the STAs in the mesh.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-25 23:43:35 +02:00
Jouni Malinen
65d0b67c22 mesh: Increase plink action frame AMPY buffer length for max GTK/IGTK
The previous calculation of the buffer length did not take into account
the possibility of 32-octet GTK and IGTK values and it was also missing
something to cover the 16 octet keys that are supported now. Other
buffer elements were likely sufficient to cover all these cases, but
anyway, it is better to allocate sufficient size specifically for AMPE
to avoid issues in the future.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-25 23:35:40 +02:00
Bilal Hatipoglu
b1b62a1364 WPS: Add WPS-PIN-ACTIVE and WPS-CANCEL events
WPS_EVENT_CANCEL is added to indicate cancellation of a WPS operation
for any reason in hostapd/wpa_supplicant.

WPS_EVENT_PIN_ACTIVE is added to indicate when a PIN operation is
triggered in wpa_supplicant.

Signed-off-by: Veli Demirel <veli.demirel@airties.com>
Signed-off-by: Bilal Hatipoglu <bilal.hatipoglu@airties.com>
2019-12-25 20:58:52 +02:00
Bilal Hatipoglu
0b1839405e Add "reconnect" cmdline argument to hostapd_cli/wpa_cli
When the newly added "-r" parameter is used, both clis will try to
reconnect forever on connection lost until signalled (ctrl+c) or
terminated. This is useful only when used with -a to take action to
retrieve events or get status and the cli process stays even if
hostapd/wpa_supplicant daemons restart for some reason (e.g.,
configuration change).

Signed-off-by: Veli Demirel <veli.demirel@airties.com>
Signed-off-by: Bilal Hatipoglu <bilal.hatipoglu@airties.com>
2019-12-25 20:54:44 +02:00
Jouni Malinen
4318a635a9 DBus: Update dont_quote[] with new network profile parameters
This array had not been updated for years (since it was initially added)
and it was missing new network profile parameters that were not quoted
strings (but also not integers that could be set as integer types). Add
those missing non-quoted-strings to allow them to be set through the
DBus interface.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-25 12:45:44 +02:00
Jouni Malinen
26a00ba8bd DBus: Remove not existing network profile params from dont_quote[]
These parameters are global parameters, not network profile parameters,
and as such, do not below in dont_quote[] which is used to determine
whether a network profile parameter needs to be quoted.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-25 12:26:33 +02:00
Matthew Wang
23d87687c2 dbus: Move roam metrics to the correct interface
These properties were in the wpas_dbus_bss_properties array when they
should have been in the wpas_dbus_interface_properties array. Move them
to the right place. This is the logical location for these properties
and it matches both the other parts of the implementation (e.g., being
in enum wpas_dbus_prop, not in enum wpas_dbus_bss_prop) and what
was originally documented for the interface in dbus.doxygen.

Fixes: 2bbad1c7c9 ("dbus: Export roam time, roam complete, and session length")
Fixes: 80d06d0ca9 ("dbus: Export BSS Transition Management status")
Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2019-12-24 21:16:23 +02:00
Michal Kazior
8e111157e7 nl80211: Relax bridge setup
Normally nl80211 driver will attempt to strictly control what bridge
given interface is put in. It'll attempt to remove it from an existing
bridge if it doesn't match the configured one. If it's not in a bridge
it'll try to put it into one. If any of this fails then hostapd will
bail out and not set up the BSS at all.

Arguably that's reasonable since it allows to set the BSS up coherently
with regard to EAPOL handling as well as allows extra interactions with
things like FDB. However, not all hostapd drivers interact with bridge=
the same way. One example is atheros. Therefore it's not clear what the
desired behavior should be if consistency across drivers is considered.

There's a case where one might want to use a non-native Linux bridge,
e.g., openvswitch, in which case regular ioctls won't work to put an
interface into a bridge, or figure out what bridge an interface is in.
The underlying wireless driver can still be an ordinary nl80211 driver.

This change relaxes the bridge setup failure so that hostapd still
starts even if it fails to add an interface into a configured bridge
name. It still sets up all the necessary sockets (including the
configured bridge=) so EAPOL handling should work fine. This then leaves
it to the system integrator to manage wireless interface as bridge ports
and possibly fdb hints too.

Signed-off-by: Michal Kazior <michal@plume.com>
2019-12-24 21:16:23 +02:00
Sergey Matyukevich
3626e72c8d l2_packet: Fix bridge workaround for repeater configuration
In repeater configuration, both AP and STA wireless interfaces may be
included into the same bridge. In this case the following race condition
may occur: wpa_supplicant and hostapd are started, then hostapd clients
are connected before wpa_supplicant connects to remote AP. EAPOL packets
between hostapd and its clients are detected by wpa_supplicant on bridge
interface, prematurely disabling the workaround.

One possible option to fix this issue is to check EAPOL destination MAC
in wpa_supplicant and disable workaround only if EAPOL packet on bridge
interface is indeed intended for wpa_supplicant.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2019-12-24 21:16:23 +02:00
Jouni Malinen
9f47fdb6c3 tests: Make FT PMKSA caching test cases more robust
The RECONNECT command on the station was issued immediately after
wpa_supplicant had processed EAPOL-Key msg 3/4. This could happen before
hostapd has processed EAPOL-Key msg 4/4 and especially with UML
time-travel, this could result in the following FT protocol exchange
going through in a manner that makes the hostapd process EAPOL-Key msg
4/4 from the first association as a postponed EAPOL RX at the beginning
of the second association. Avoid this by waiting hostapd to report
completion of the connection before issuing RECONNECT.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-24 21:16:23 +02:00
Jouni Malinen
c0f3ee475b tests: FT-SAE with PWE default and with H2E
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-24 21:16:23 +02:00
Jouni Malinen
84972999ba FT: More debug prints for RSNE modification for EAPOL-Key msg 2/4
This buffer was getting corrupted, so add more details to make it
clearer what causes the corruption should this type of regression show
up again.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-24 21:16:23 +02:00
Jouni Malinen
4cfa8b92ba Fix wpa_insert_pmkid() when buffer includes extra IEs
The case where the old RSNE included one or more PMKIDs and that RSNE
was followed by another IE was handled incorrectly since the
os_memmove() to move the end of the buffer when removing old PMKIDs was
stopping copying at the end of the RSNE, not the end of the IE buffer.
This could result in corrupting the IE that followed the RSNE. In
practice, this broke FT-SAE with H2E by corrupting the RSNXE that is in
the buffer after the RSNE.

Fix this by copying the full end of the buffer (i.e., including the
following RSNXE in the visible error case) when removing the old PMKIDs.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-24 21:16:23 +02:00
Jouni Malinen
6298673ff3 tests: Prepare rsn_ie_proto_ft_psk_sta for implementation change
This PMKID replacement case is not going to prevent connection after a
change in wpa_insert_pmkid() so remove it.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-24 21:16:23 +02:00
Sam Tygier
32289112c4 wpa_passphrase: Output errors to stderr
The stdout of wpa_passphrase is often piped directly into the
wpa_supplicant config file. In case of errors these will be written to
the file and possibly not noticed by the user.

Use fprintf to print errors to stderr.

Signed-off-by: Sam Tygier <samtygier@yahoo.co.uk>
2019-12-24 11:14:27 +02:00
Jouni Malinen
ce1598d4c2 tests: New style fuzzing tool for EAP-MSCHAPv2 peer processing
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-24 10:59:22 +02:00
Jouni Malinen
07fe134d9c EAP-SIM peer: Do not accept SIM/Challenge without SIM/Start
EAP-SIM full authentication starts with one or more SIM/Start rounds, so
reject an unexpected SIM/Challenge round without any preceeding
SIM/Start rounds to avoid unexpected behavior. In practice, an attempt
to start with SIM/Challenge would have resulted in different MK being
derived and the Challenge message getting rejected due to mismatching
AT_MAC unless the misbehaving server has access to valid Kc, so the end
result is identical, but it is cleaner to reject the unexpected message
explicitly to avoid any risk of trying to proceed without NONCE_MT.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-23 23:59:16 +02:00
Jouni Malinen
2636362717 tests: Make nfc_wps_handover_init more robust
Data connectivity test could have been started in the middle of 4-way
handshake. This test case needs to wait for two STA connections before
starting the connectivity test since the first one is only for the
provisioning step.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-23 20:19:03 +02:00
Jouni Malinen
b2e2a8588d OpenSSL: Extend key_block size determination to support GCM/CCM ciphers
These ciphers do not use a separate MAC algorithm, so digest nid will be
NID_undef. In addition, the fixed_iv_length needs to be set to 4 which
is the implicit part of the IV from PRF. This is needed to fix EAP-FAST
key derivation for cases where GCM/CCM ciphers are used for TLS.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-23 20:02:45 +02:00
Jouni Malinen
f94e677d33 tests: DPP exchange when driver uses a separate P2P Device interface
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-23 11:20:17 +02:00
Jouni Malinen
efaa6256e2 More detailed documentation on ieee80211w configuration parameter
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-23 10:48:09 +02:00
Jouni Malinen
1730a6a5ef nl80211: Fix couple of typos in a comment
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-23 10:24:49 +02:00
Mikael Kanstrup
307cfc3286 Strip trailing zero data in EAPOL-Key msg 1/4 when no PMKID to send
EAPOL-Key message 1/4 without PMKID KDE was sent with 22 bytes of stray
data following a zero length key data field. These 22 bytes happens to
be the exact size of an PMKID KDE. Strip these trailing bytes by
checking whether a PMKID is available and adjust pmkid_len to 0 if not.

This was seen for example in capture files created by hwsim test case
suite_b_192 but code modified to handle also the other cases without
PMKID (Suite B no-KCK, FILS without PMKID available, SAE without PMKID
available).

Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sony.com>
2019-12-23 00:26:07 +02:00
Jouni Malinen
2c5ccfa607 nl80211: Initialize full channel info struct even if channel is not known
It was possible for the driver to advertise support for channels that
are not found from wpa_supplicant frequency-to-channel mapping (e.g.,
channel 182 at 5910 MHz) and that resulted in not initializing the
channel number information. Fix this by explicitly clearing the full
struct hostapd_channel_data buffer before parsing the information into
it from the driver.

This avoids some conditional jumps that could have dependent on
uninitialized values.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-23 00:01:02 +02:00
Jouni Malinen
dbdd445d33 tests: Make DPP text cases more robust for DPP-TX event processing
The previous waits were matching both DPP-TX and DPP-TX-STATUS and if
the latter event was received, the test cases would either report
failure or would not really test what was supposed to be verified. Fix
this by waiting explicitly for "DPP-TX " to avoid matching
"DPP-TX-STATUS" prefix.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-22 23:33:21 +02:00
Jouni Malinen
bf97c1a34e tests: FILS SK/ERP and roaming with different AKM
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-22 18:33:43 +02:00
Jouni Malinen
534d36210b tests: Make fils_sk_auth_mismatch more robust
Wait STA connection to be completed in hostapd before testing
connectivity. This avoids a possible race condition that could be hit
especially when testing with UML time-travel.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-12-22 17:20:33 +02:00
Brian Norris
e6d3aca9cf WPS: Add prefixes to public event_* functions
openssl engines may dynamically load external libraries. Our event_*()
functions happen to be named very generically, such that event_add()
collides with the libevent library (https://libevent.org/). This can
have disastrous effects (esp. when using CONFIG_WPA_TRACE, which enables
partial linking) when our SSL engines call into the WPS event_add()
instead of their intended libevent event_add().

Resolve this by providing a more unique prefix to these functions.

Rename performed via:

  sed -i -E \
    's:\<event_(add|delete_all|send_all_later|send_stop_all)\>:wps_upnp_event_\1:g' \
     $(git grep -l event_)

Tested via (among other things) hwsim '-f ap_wps' module.

Signed-off-by: Brian Norris <briannorris@chromium.org>
2019-12-22 11:24:28 +02:00
Brian Norris
e371d3771c tests: OWE: allow hex integers from tshark
Old versions of tshark would dump these values as hex. Allow parsing as
either decimal or hex.

Signed-off-by: Brian Norris <briannorris@chromium.org>
2019-12-22 11:09:44 +02:00
Davide Caratti
2ba6aa6045 Fix memory leak in case allocation of token fails during JSON parsing
On failure of json_alloc_token(), json_parse() can return without
freeing 'str' previously allocated by json_parse_string(). Fix this
adding proper call to os_free().

Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
2019-12-21 17:32:19 +02:00
Alexander Wetzel
84877f253d wpa_supplicant: Do not try to detect PSK mismatch during PTK rekeying
When a PTK rekey fails it can't be caused by a PSK mismatch. Report a
possible PSK mismatch only during the initial 4-way handshake to avoid
incorrect reports.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2019-12-21 17:10:17 +02:00
Alexander Wetzel
78d338d1b1 DPP: Fix a memory leak on an error path
Fix a memory leak exposed by the dpp_own_config_sign_fail test.

Fixes: 52d469de11 ("DPP2: Support multiple Config Objects in Enrollee")
Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2019-12-21 17:02:00 +02:00
Jouni Malinen
972edba185 tests: DPP connection status - association rejection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 16:53:26 +02:00
Jouni Malinen
9be30ffc13 DPP: Abort ongoing scan if connection status needs to be sent
Ongoing scan could prevent the station Enrollee from sending out DPP
connection status after the 15 second timeout and that would result in
the Configurator timing out on the wait for the status report. Abort any
ongoing scan, if needed, to avoid this.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 16:51:59 +02:00
Vamsi Krishna
3f3876344e SAE: Enable NEED_DH_GROUPS_ALL for CONFIG_TESTING_OPTIONS=y builds
Enable all DH FFC groups for SAE in wpa_supplicant testing builds. These
are needed to allow more testing coverage for AP functionality.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 16:27:19 +02:00
Min Liu
1f1567d2a6 QCA vendor command for getting STA information
Add a QCA vendor subcommand QCA_NL80211_VENDOR_SUBCMD_GET_STA_INFO with
attributes defined in enum qca_wlan_vendor_attr_get_sta to get
information for a BSS in STA mode or for a peer STA in AP mode. This
vendor sub command can be used to get STA information from the driver to
userspace. The attributes defined in enum
qca_wlan_vendor_attr_get_sta_info are used to encapsulate required
information.

Signed-off-by: Min Liu <minliu@codeaurora.org>
2019-12-20 16:25:30 +02:00
Jouni Malinen
5ae5dd03d5 tests: Automatic channel selection with freqlist set
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:41:57 +02:00
Vamsi Krishna
e5620bf025 6 GHz: Select channel width using configured op_class
Use op_class to derive channel width for the operating channel when
op_class is configured by the user in both fixed channel and ACS cases.
We can avoid using ht_capab field to derive channel width especially in
the 6 GHz band in which only HE is supported.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:38:05 +02:00
Vamsi Krishna
0bfc04b8d0 Do not enable HT/VHT when operating in 6 GHz band
Only HE mode is allowed in the 6 GHz band hence do not enable HT/VHT
even if they are configured by the user.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:25:07 +02:00
Ankita Bajaj
da8570f4c9 Allow non-PCS 6 GHz channels to be excluded from ACS
Add support to exclude non-PSC 6 GHz channels from the input frequency
list to ACS. The new acs_exclude_6ghz_non_psc=1 parameter can be used by
6 GHz only APs.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:23:13 +02:00
Ankita Bajaj
59bb72642a Allow ACS channel list to be configured as frequencies (in MHz)
The channel numbers are duplicated between 2.4 GHz / 5 GHz bands and 6
GHz band. Hence, add support to configure a list of frequencies to ACS
(freqlist) instead of a list of channel numbers (chanlist). Also, both 5
GHz and 6 GHz channels are referred by HOSTAPD_MODE_IEEE80211A. The 6
GHz channels alone can be configured by using both mode and frequency
list.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:19:52 +02:00
Ankita Bajaj
5f9b4afdfa Use frequency in HT/VHT validation steps done before starting AP
Using the channel parameter for validating allowed channel combinations
is not scalable to add 6 GHz support in the future since channel numbers
are duplicated between 2.4 GHz / 5 GHz bands and 6 GHz band. Hence use
frequency field for all channel combination validation steps done before
starting AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 13:05:39 +02:00
Ankita Bajaj
59e33b4a98 ACS: Select current hw_mode based on the selected frequency
After receiving ACS offload results, select the current hw_mode based on
the frequency selected by the ACS algorithm. The current hw_mode will be
further used during other validation steps such as HT capability
validations, DFS validation, etc.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 12:45:03 +02:00
Ankita Bajaj
bb781c763f AP: Populate iface->freq before starting AP
Using channel field while starting AP will cause issues with the new
6GHz band as the channel numbers are duplicated between the different
bands. Populate iface->freq before starting AP so that it can be used
instead of the channel number for all validations that need to be done
while starting AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 12:42:47 +02:00
Ankita Bajaj
41cac481a8 ACS: Use frequency params in ACS (offload) completed event interface
Replace channel fields with frequency fields in ACS completed event
interface from the driver layer. Use
QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_FREQUENCY and
QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_FREQUENCY attributes if the driver
includes them in the QCA_NL80211_VENDOR_SUBCMD_DO_ACS event, otherwise
use QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL and
QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL attributes to maintain
backwards compatibility with old drivers.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 12:31:01 +02:00
Ankita Bajaj
840532aea5 Search through all hw_features sets in hw_get_channel_freq()
The 5 GHz channels are stored in one hw_features set with mode
HOSTAPD_MODE_IEEE80211A while the 6 GHz channels will need to stored in
a separate hw_features set (but with same mode HOSTAPD_MODE_IEEE80211A)
due to possibility of different HE capabilities being available between
the 5 GHz and 6 GHz bands.

Search through all hw_features sets whose mode is same as the input mode
while finding channel corresponding to the input frequency in
hw_get_channel_freq().

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 12:21:45 +02:00
Ankita Bajaj
15d3568739 ACS: Add channels from all modes matching with configured hw mode
The 5 GHz channels are stored in one hw_features set with mode
HOSTAPD_MODE_IEEE80211A while the 6 GHz channels will need to stored in
a separate hw_features set (but with same mode HOSTAPD_MODE_IEEE80211A)
due to possibility of different HE capabilities being available between
the 5 GHz and 6 GHz bands.

Iterate through all hw_features sets and populate channels from all
hw_features sets whose hardware mode is matching the configured hardware
mode while preparing the channel list for ACS.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-12-20 12:21:41 +02:00
Ahmad Masri
996662250d P2P: Add support for EDMG channels
This allows a P2P connection over P802.11ay EDMG channels to achieve the
highest link speed that the standard allows for channel bonding (CB) up
to CB4.

Let each P2P peer add its EDMG channels to the Supported Channels IE
advertised in P2P GO negotiation. Give EDMG channels priority when peers
negotiate for operating channel.

User may add 'edmg' parameter to p2p_connect, p2p_add_group, and
p2p_invite commands to prefer an EDMG channel for the P2P link. User may
also set p2p_go_edmg=1 in wpa_supplicant configuration file to prefer
EDMG.

When EDMG is used, P2P will try to find the highest channel bonding
supported channel that matches the frequency parameter, if the devices
do not support EDMG, the P2P connection will use a legacy (1-6) 60 GHz
channel.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2019-12-20 00:13:08 +02:00
Ahmad Masri
f86e34168e Update operating classes and channels for the 60 GHz band
Update new channels in Channel Bonding (CB2 ... CB4) in the 60 GHz band
for different regulatory regions according to the latest draft amendment
IEEE P802.11ay/D5.0.

Signed-off-by: Ahmad Masri <amasri@codeaurora.org>
2019-12-20 00:00:52 +02:00