Store SNonce and ANonce from FT Authentication frames during FT
over-the-air so that these values are available for processing the FT
reassociation frames.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Use the MLD MAC addresses and MLO-specific MIC calculation rules per
IEEE P802.11be/D4.0, 13.8.5.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The FTE parser itself used valid data, but the reassembled buffer was
available only during the parser run. That buffer will be needed for the
caller as well since most of the parsed data is used as pointers instead
of copied data.
Store the reassembled buffer in struct wpa_ft_ies and require
wpa_ft_parse_ies() callers to use wpa_ft_parse_ies_free() to free any
possibly allocated temporary data after wpa_ft_parse_ies() calls that
return success (0).
Fixes: 43b5f11d96 ("Defragmentation of FTE")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Generate the "extra" data buffer outside wpa_ft_mic() to make this
function easier to share for MLO FT Reassociation Response frame. This
replaces the earlier design in commit e6f64a8e1d ("FT: FTE MIC
calculation for MLO Reassociation Request frame").
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Make this function more capable to address cases where a specific
affiliated link of an AP MLD needs to be found.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
SPA (FTO's MAC address) and AA (FTR's MAC address) are the MLD MAC
addresses when using MLO and the Reassociation Request frame will also
include the non-AP STA MAC addresses for the requested links.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Extend wpa_ft_mic() to take in an array of link addresses to allow the
FTE MIC to be calculated for Reassociation Request frame as described in
IEEE P802.11be/D4.0, 13.8.4. This commit does not change actual
behavior, i.e., this is just preparing wpa_ft_mic() and the existing
callers with a new argument.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Store the non-AP MLD link address of the link that is used for
association when processing (Re)Association Request frames. This is
needed to get the full set of link addresses when 4-way handshake is not
used (e.g., for FT protocol).
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This is needed to be able to find a previously added STA entry when
roaming using FT over-the-DS back to an AP MLD that was used previously.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Use STA address indicated in FT Request/Response frames instead of
transmit or receive addresses for creating/finding STA instance.
For MLO to MLO roaming:
1. STA may use different link compared to FT Action frames negotiated
links.
2. STA may reassociate with target AP MLD with different set of
links compared to links connected to current AP MLD.
So create STA with MLD MAC address and attach to one of the BSS
affiliated with target AP MLD. Update link address of the STA and BSS
during processing of the Reassociation Request frame.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Use AP and STA addresses indicated in FT Request/Response frames for
PMK-R1 and PTK derivation instead of the addresses in the BSS and STA
entries. This is needed for MLO to use the MLD MAC address instead of
one of the link addresses.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
This makes the code more readable by getting rid of the multiple
instances of references to the specifiec fields within the FT Action
frame.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
The MIC length depends on the negotiated group when SAE-EXT-KEY or OWE
key_mgmt is used. wlantest can determine the group if the capture file
includes the group negotiation, i.e., the initial association when a PMK
was created. However, if the capture file includes only an association
using PMKSA caching, the group information is not available. This can
result in inability to be able to process the EAPOL-Key frames (e.g.,
with the "Truncated EAPOL-Key from" message).
If the negotiated group is not known and an EAPOL-Key frame length does
not seem to match the default expectations for group 19, check whether
the alternative lengths for group 20 or 21 would result in a frame that
seems to have valid length. If so, update the STA entry with the guessed
group and continue processing the EAPOL-Key frames based on this.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Commit b20991da69 introduced errors in
the order of arguments to the calls of ccmp_decrypt() and
ccmp_256_decrypt(). Correct the order of arguments.
Fixes: b20991da69 ("wlantest: MLD MAC Address in CCMP/GCMP AAD/nonce")
Signed-off-by: Henry Ptasinski <henry@e78com.com>
The new PTK migth need to be copied to another MLO STA entry, but that
operation should not modify the MLD MAC address of unrelated AP MLDs.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The "Updated AP MLD MAC Address from EAPOL-Key 1/4" can be confusing
when there is actually no change.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This makes the "Discovered new STA" entries in the debug log easier to
use when analyzing roaming cases with MLO.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
When FT over-the-DS is used with MLO, the Target AP Address field is
expected to identify the AP MLD using its MLD MAC address.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Allow either a link address or the MLD MAC address of a non-AP MLD to
match the MAC address that is being used to identify a source or
destination of a frame for the MLO cases.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
FT over-the-DS might have created the new STA entry on another
affiliated BSS during the FT Request/Response exchange, so use a wider
search to locate the correct STA entry when processing the Reassociation
Request/Response frames.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Use the Basic Multi-Link element in (Re)Association Request frames to
learn the non-AP MLD MAC address instead of having to wait until this
address is included in an EAPOL-Key frame. This is needed for FT
protocol (where 4-way handshake is not used) and it is also convenient
to have the MLD MAC address available as soon as possible to be able to
decrypt frames and even to recognize some special AP vs. STA cases when
either the BSSID or the AP MLD MAC address might be used.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Compare A1 against all the link addresses of a non-AP MLD when
determining whether a Data frame is from the non-AP MLD or the AP MLD
during a decryption attempt.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Make sta_find_mlo() more accurate by searching a non-AP MLD only from
the affialiated BSSs of the AP MLD instead of from any BSS. This might
help in some roaming cases where both the old and the new AP MLD have
their affiliated links in the BSS table.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Use the Basic Multi-Link element in Beacon frames (and Probe Response
frames for that matter) to learn the AP MLD MAC address instead of
having to wait until this address is included in an EAPOL-Key frame.
This is needed for FT protocol (where 4-way handshake is not used) and
it is also convenient to have the MLD MAC address available as soon as
possible to be able to decrypt frames and even to recognize some special
AP vs. STA cases when either the BSSID or the AP MLD MAC address might
be used.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The set of protected elements in the FTE in Reassociation Response frame
is different for MLO. Count RSNE and RSNXE separately for each link.
This implementation uses the number of links for which a GTK was
provided which does not fully match the standard ("requested link") and
a more accurate implementation is likely needed, but that will require
some more complexity and state information.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Allow the -r<file> command line argument to be used multiple times to
read more than a single capture file for processing. This reduces need
for external tools to be used first to merge capture files for wlantest.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The Key MIC field is of variable length when using OWE, so determine the
correct length based on which group was negotiated for OWE during
association.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Check the +HTC bit in FC to determine if the HT Control field is present
when decrypting Robust Management frames. This was already done for QoS
Data frames, but the Management frame case had not been extended to
cover this option.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Find a STA entry based on MLO affiliated link addresses for the case
where an unprotected Data frame is being processed. This extends the
changes in commit 228420e2d9 ("wlantest: Find a STA entry based on MLO
affiliated link addresses") to cover the unencrypted case. This is
needed in particular for the Null frames used for managing the power
save state to avoid generating duplicate STA entries that can mess up
key information for the following frames.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This is needed to derive the PTK correct when Secure LTF support is used
and the additional KDK component needs to be taken into account.
Signed-off-by: Adil Saeed Musthafa <quic_adilm@quicinc.com>
Commit b20991da69 ("wlantest: MLD MAC Address in CCMP/GCMP AAD/nonce")
updated AAD and nonce construction to use MLD addresses in AAD for A1
and A2. IEEE P802.11be has additional cases where A3 in AAD is set to
the AP MLD address, so cover those as well.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Prefer a BSS entry that has a matching STA entry when processing
EAPOL-Key frames. This avoids issues where some combination of MLD
and/or link addresses are used in a sequence that could end up
generating two separate STA entries for the same non-AP MLD.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The BSSID (RA/TA) might differ from SA/DA for the AP, so print it as
well in the debug entry for EAPOL-Key frames.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Commit 25b52e5f83 ("FT: Extend FTE parsing for FT-SAE-EXT-KEY") used
possible MIC length iteration to try to figure out the length of the MIC
field in FTE. That was the only option available at the time, but FTE is
now being extended in IEEE 802.11-REVme to explicitly indicate the
length of the MIC field for the new FT-SAE-EXT-KEY AKM to make this
easier.
Use the new design from the approved comment resolution (*) in
REVme/D2.0 ballot CID 3135 to simplify implementation. This gets rid of
the need to pass in key length and the somewhat strange need_{r0kh,r1kh}
parameters to wpa_ft_parse_ies().
(*)
https://mentor.ieee.org/802.11/dcn/22/11-22-1991-02-000m-proposed-resolutions-to-some-lb270-comments.docx
Signed-off-by: Jouni Malinen <j@w1.fi>
It is possible for there to be multiple STA entries (e.g., one for each
BSS) when a sniffer capture contains multiple associations using MLO.
For such cases, the new PTK information needs to be updated to all
existing STA entries to be able to find the latest TK when decrypting
following frames since the other STA entries might be located first when
trying to figure out how to decrypt a frame.
In addition to the PTK, copy the MLD MAC addresses to the other STA and
BSS entries to make sure the latest values are used when trying to
decrypt frames.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Provide AKM, key length, and information about needed subelements to the
parser function so that the variable length MIC field cases can be
recognized for FT-SAE-EXT-KEY. Knowledge about R0KH-ID/R1KH-ID being
needed is required to be able to iterate over possible MIC field lengths
for the case where the AP does not yet know the correct key length at
the beginning of FT protocol.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Provide AKM to the helper function so that the new SHA256 and SHA512
options can be covered for FT-SAE-EXT-KEY.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Extend wlantest capabilities to cover the new SAE-EXT-KEY AKM and
variable length MIC field and key lengths for it based on the used SAE
group.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Update bss entries for all affiliated links whenever learning
GTK/IGTK/BIGTK from EAPOL-Key msg 3/4 or group msg 1/2.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Allow a single STA entry to be found for a non-AP MLD regardless of
which link MAC address was used to transmit/receive it.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Update STA state tracking for SAE authentication as well as the previous
covered Open System algorithm.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Check the Beacon/Probe Response frame RSNE against the RSNE within the
MLO Link KDE for the current affiliated link instead of RSNE when
processing the EAPOL-Key msg 3/4 Key Data field.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This makes the debug message more useful for determining whether an
expected BIGTK has been derived.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Make this easier to understand by using the appropriately named function
to parse KDEs/IEs in the Key Data field of EAPOL-Key frames instead of
using the wrapper function that is there just to provide the old
function name for wpa_supplicant.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
