Commit graph

11555 commits

Author SHA1 Message Date
Jouni Malinen
4f910f38e5 Fix a typo in QCA vendor attribution documentation
The previously used subcommand names in the comment did not match the
ones defined above.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 21:11:25 +03:00
vamsi krishna
ab21863108 Define QCA vendor config attribute to set default scan IEs to the driver
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 21:11:05 +03:00
Jouni Malinen
96485214f7 tests: HT/VHT values in STATUS
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 17:43:38 +03:00
Jouni Malinen
1b8ef4061c tests: WEP with HT/VHT
Verify that HT/VHT gets disabled in WEP configuration.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 17:43:26 +03:00
Jouni Malinen
5a5638a3bf Show disabled HT/VHT properly in AP mode STATUS command
Previously, HT/VHT state was shown in STATUS based on the configuration
parameter instead of the runtime operational parameters. This could
result in claiming HT/VHT to be enabled even when it was forced to be
disabled due to an incompatible configuration. Clear HT/VHT information
in the STATUS output if HT/VHT has been disabled.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 17:41:01 +03:00
Wu Gao
551817a582 AP: Disable VHT in WEP configuration
This was already done for HT, but VHT has the same constraint on not
allowing WEP.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-08-02 17:31:48 +03:00
Rahul Bedarkar
8df4765327 doc: Correct spelling mistake
s/availibility/availability

Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
2016-07-31 21:23:06 +03:00
Chaitanya T K
f5728d0a82 nl80211: Fix segfault when params->freq is NULL for AP mode start
If params->freq is NULL here, it leads to a segfault. Do not initialize
bss->bandwidth if params->freq is NULL.

Signed-off-by: Chaitanya T K <Chaitanya.Mgit@gmail.com>
2016-07-23 22:06:10 +03:00
Masashi Honma
3388e7b96f mesh: Remove HT IEs if HT is disabled
Previously, HT capability IE and HT information IE were included in
Beacon and Mesh Peering Open/Confirm frames even if HT is disabled with
disable_ht=1. This patch removes these.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-07-23 22:04:16 +03:00
Masashi Honma
4ac2ea5738 mesh: Make DTIM period configurable
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-07-23 21:58:04 +03:00
Masashi Honma
fac72f93dd mesh: Stop joining to different frequency network
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-07-23 21:57:15 +03:00
Masashi Honma
7035162311 mesh: Join an existing MBSS instead of creating a new one
If scan results show a matching existing MBSS, join it instead of
creating a new MBSS.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-07-23 21:57:11 +03:00
Mikael Kanstrup
58fe015a32 gitignore static library files
Signed-off-by: Mikael Kanstrup <mikael.kanstrup@sonymobile.com>
2016-07-23 21:03:54 +03:00
Nishant Chaprana
0f282c76ee P2Ps: Clear existing value when peer stops sending adv_service_instance
If a peer stops sending adv_service_instance, we should clear the
existing dev->info.p2ps_instance.

This commit fixes the following scenario:

When peer device stops sending adv_service_instance, wpa_supplicant did
not remove old dev->info.p2ps_instance from device's property. This
variable should be updated as per peer behavior and should be cleared
when peer stops sending this information.

Signed-off-by: Nishant Chaprana <n.chaprana@samsung.com>
2016-07-23 20:55:52 +03:00
Jouni Malinen
ce4af56322 tests: DRIVER_FLAGS command
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-23 20:51:55 +03:00
Erik Ljungberg
4d7aab78bd Make driver flags available through control interface
This shows the current set of driver flags in wpa_cli and hostapd_cli.

Signed-off-by: Erik Ljungberg <erik.ljungberg@sonymobile.com>
2016-07-23 20:46:20 +03:00
MAYANK HAARIT
77d468e4db P2P: Cleanup by removing unnecessary os_free() call from p2p_deinit()
Remove the unnecessary os_free() call from p2p_deinit() since
p2p_flush() called just above this takes care of freeing
p2p->after_scan_tx and the second call here ends up being no-op
os_free(NULL) in practice.

Signed-off-by: Mayank Haarit <mayank.h@samsung.com>
2016-07-23 20:35:56 +03:00
Masashi Honma
e347cafe57 mesh: Report mesh peer AID to kernel
Previously, mesh power management functionality works only with kernel
MPM. Because user space MPM did not report mesh peer AID to kernel,
the kernel could not identify the bit in TIM element. So this patch
reports mesh peer AID to kernel.

Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
2016-07-23 20:26:26 +03:00
Jouni Malinen
e3227c32f0 Sync with mac80211-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2016-07-01.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-23 20:25:28 +03:00
Sunil Dutt
6c34b9c2d2 Assign QCA vendor attribute for setting TX fail count threshold
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-07-22 20:10:06 +03:00
zhangq
52fec3669c Assign QCA vendor attributes for set retry configuration
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-07-22 00:35:37 +03:00
Chandrasekaran, Manishekar
1c8fe68f62 QCA vendor command to configure conditional switch channel for AP
This commit introduces a new vendor sub command
QCA_NL80211_VENDOR_SUBCMD_SAP_CONDITIONAL_CHAN_SWITCH and associated
attributes which aim to configure selected frequencies on which the AP
can conditionally switch onto for preferred operation.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-07-22 00:35:28 +03:00
Jouni Malinen
34a5014507 MBO: Remove unused assignment
The local found variable is not used in this case. Commit
653d227e9f ('MBO: Improve supported
operating class generation') introduced this variable and unnecessarily
set it here. Remove the write-only assignment to silence static
analyzers.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2016-07-18 23:41:19 +03:00
Jouni Malinen
d9ed0ce65e tests: WPA2-PSK AP with station using SA Query local failures
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:58:27 +03:00
Jouni Malinen
f8608fab85 SME: Fix SA Query local failure handling
If no new sme_sa_query_timer() callback is scheculed,
sme_stop_sa_query() needs to be called to allow new SA Query operations
to be started after the failure.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:57:34 +03:00
Jouni Malinen
ab6ab07ad1 Clear wpa_s->sme.last_unprot_disconnect.sec on FLUSH command
This is needed for hwsim test cases to allow multiple STA-initiated SA
Query operations in short amount of time.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:56:53 +03:00
Jouni Malinen
e0a9370b3f tests: Overlapping BSS scan request (HT40+)
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:14:34 +03:00
Jouni Malinen
dcbb5d808b tests: FT OOM in SME
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-18 00:14:14 +03:00
Jouni Malinen
674af173fe tests: AP with open mode and driver operations failing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 23:49:44 +03:00
Jouni Malinen
28be769bc3 tests: SAE and invalid anti-clogging token request
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 17:53:25 +03:00
Jouni Malinen
dcd54211c4 tests: IEEE 802.1X connection using dynamic WEP104 when WPA enabled
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 17:34:16 +03:00
Jouni Malinen
d1150e5666 tests: IEEE 802.1X connection with LEAP included in configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 17:34:16 +03:00
Jouni Malinen
2fd44db70e tests: More SAE OOM coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 17:34:16 +03:00
Jouni Malinen
19f2a3f357 tests: Hotspot 2.0 OSU provider and OOM
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 11:08:02 +03:00
Jouni Malinen
f281f508b7 tests: Hotspot 2.0 OSU provider and invalid directory
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 11:08:02 +03:00
Jouni Malinen
9636b07ae2 HS 2.0: Add an event message to note failed OSU provider write
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 11:08:02 +03:00
Jouni Malinen
502f0ce848 tests: More GET_HS20_ICON coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-17 11:08:02 +03:00
Jouni Malinen
6fc562a406 tests: Unexpected Hotspot 2.0 AP configuration
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-15 13:30:57 +03:00
Jouni Malinen
78d2233f01 tests: Fix ap_wpa2_eap_too_many_roundtrips with OpenSSL 1.1.0
Use a smaller fragment_size to force the roundtrip limit to be reached
with OpenSSL 1.1.0 which seemed to result in a bit shorter TLS messages
being used and being able to complete the authentication successfully
with the previously used fragment_size value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-15 13:30:57 +03:00
Jouni Malinen
460e5cdf43 OpenSSL: Fix OpenSSL 1.1.0 DH operation
Commit 49fe2ada20 ('OpenSSL: Support
OpenSSL 1.1.0 DH opacity') started using the new accessor functions, but
used incorrect success check for the DH_set0_key() call. This resulted
in dh5_init_fixed() failures and double-free on error path if the build
was linked against OpenSSL 1.1.0. Fix this by checking DH_set0_key()
return value to be 1 for the success case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-15 13:30:57 +03:00
Jouni Malinen
ec9812e7e7 tests: Hotspot 2.0 OSU provider and protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-15 13:30:57 +03:00
Jouni Malinen
dd20eabd16 HS 2.0: Add optional no-scan parameter to FETCH_OSU
This is mainly for testing purposes to allow multiple FETCH_OSU ANQP
operations to be ran without having to wait for full scan between each
query.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-12 23:13:09 +03:00
Jouni Malinen
2752537926 tests: Hotspot 2.0 OSU provider and no icon found
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-12 20:58:20 +03:00
Jouni Malinen
424e344fbf tests: Hotspot 2.0 connection and deauthentication request without PMF
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-12 20:49:02 +03:00
Jouni Malinen
21d410ca82 tests: GAS/ANQP and Hotspot 2.0 element protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-12 00:14:42 +03:00
Jouni Malinen
5dec77ee00 tests: GAS/ANQP and icon binary protocol testing
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-12 00:05:35 +03:00
Jouni Malinen
f465c32dc2 Interworking: Define control interface message prefixes in wpa_ctrl.h
These control interface event message are used by external programs, so
define them a bit more formally in the header file.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-11 21:56:56 +03:00
Jouni Malinen
3e5f781800 tests: Extend GAS error case coverage
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-11 21:56:56 +03:00
Jouni Malinen
99a9423c7b HS 2.0: Make hs20_build_anqp_req() static
This function is not used outside hs20_supplicant.c.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-11 21:56:56 +03:00
Jouni Malinen
1c39f984fd tests: Hotspot 2.0 icon fetch OOM with REQ_HS20_ICON
Signed-off-by: Jouni Malinen <j@w1.fi>
2016-07-11 21:56:56 +03:00