Commit graph

399 commits

Author SHA1 Message Date
Jouni Malinen
b8211e1e75 PASN: Avoid unreachable code with CONFIG_NO_RADIUS
There is no point in trying to build in rest of this function if in the
middle of it the CONFIG_NO_RADIUS case would unconditionally fail.
Simply make all of this be conditional on that build parameter not being
set to make things easier for static analyzers.

Signed-off-by: Jouni Malinen <j@w1.fi>
2021-02-28 11:37:47 +02:00
Jouni Malinen
dc72854fe2 Fix handle_auth_cb() message length check regression
Reordering of code in handle_auth_cb() when adding support for full
station state messaged up frame length checks. The length was originally
tested before looking at the payload of the frame and that is obviously
the correct location for that check. The location after those full state
state changes was after having read six octets of the payload which did
not help at all since there was no addition accesses to the payload
after that check.

Move the payload length check to appropriate place to get this extra
level of protection behaving in the expected manner. Since this is a TX
status callback handler, the frame payload is from a locally generated
Authentication frame and as such, it will be long enough to include
these fields in production use cases. Anyway, better keep this check in
working condition.

Fixes: bb598c3bdd ("AP: Add support for full station state")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2021-02-23 00:30:09 +02:00
Shay Bar
6c2b729de0 Use hostapd_get_oper_chwidth() when build Transmit Power Envelope element
hostapd_get_oper_chwidth(iconf) instead of direct access to
iface->conf->vht_oper_chwidth is needed here to be able to use this with
HE in cases where VHT is not enabled.

Signed-off-by: Shay Bar <shay.bar@celeno.com>
2021-02-14 00:24:53 +02:00
Shay Bar
5d3c4496fb Make VHT Transmit Power Envelope element helper more generic
According to latest IEEE 802.11 standard, Transmit Power Envelope
element is also relevant to IEEE 802.11ax and is no longer called VHT
Transmit Power Envelope. Remove the VHT naming from the element and move
hostapd_eid_txpower_envelope() from ieee802_11_vht.c to ieee802_11.c in
preparation of using it with HE.

Signed-off-by: Shay Bar <shay.bar@celeno.com>
2021-02-14 00:22:52 +02:00
Aloka Dixit
598f671321 SAE: Avoid driver STA entry removal unnecessarily when using H2E/PK
The new status code values for SAE H2E and PK resulted in the
sta->added_unassoc cases incorrectly removing the STA entry after
successful SAE commit messages. Fix this by using sae_status_success()
instead of direct check for WLAN_STATUS_SUCCESS when processing SAE
commit messages before removing station entry.

Signed-off-by: Aloka Dixit <alokad@codeaurora.org>
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
2021-02-08 23:56:59 +02:00
Raphaël Mélotte
4a7e0ac268 hostapd: Add an option to notify management frames on ctrl_iface
In some contexts (e.g., Multi-AP) it can be useful to have access to
some of the management frames in upper layers (e.g., to be able to
process the content of association requests externally).

Add 'notify_mgmt_frames'. When enabled, it will notify the ctrl_iface
when a management frame arrives using the AP-MGMT-FRAME-RECEIVED event
message.

Note that to avoid completely flooding the ctrl_iface, not all
management frames are included (e.g., Beacon and Probe Request frames
are excluded).

Signed-off-by: Raphaël Mélotte <raphael.melotte@mind.be>
2021-02-06 13:56:18 +02:00
Ilan Peer
9e7b980d65 PASN: Include RSNXE in the PASN negotiation
IEEE P802.11az/D2.6 added definitions to include RSNXE in the PASN
negotiation. Implement the new functionality in both wpa_supplicant and
hostapd.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2021-01-26 23:09:36 +02:00
Ilan Peer
2eb2fb8bd4 AP: Support PASN with FT key derivation
Note that the implementation is not complete as it is missing support
for the FT wrapped data which is optional for the station, but must be
supported by the AP in case the station included it.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2021-01-26 17:49:00 +02:00
Ilan Peer
62edb79a0c AP: Support PASN with FILS key derivation
As the PASN FILS authentication is only defined for FILS SK without PFS,
and to support PASN authentication with FILS, implement the PASN with
FILS processing as part of the PASN handling and not as part of the WPA
Authenticator state machine.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2021-01-25 20:28:33 +02:00
Ilan Peer
da35e1214d AP: Support PASN with SAE key derivation
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2021-01-25 20:27:14 +02:00
Ilan Peer
3040c8a2da AP: Add support for PASN processing to the SME
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2021-01-25 20:27:12 +02:00
Shay Bar
eee0d242bb hostapd: Add ability to disable HT/VHT/HE per BSS
Add the ability to disable HT/VHT/HE for specific BSS from hostapd.conf.

- Add disable_11ax boolean to hostapd_bss_config.
- Change disable_11n and disable_11ac to bool in hostapd_bss_config.
- Add configuration option to set these disable_11* parameters
  (which were previously used only automatically based on incompatible
  security parameters to disable HT/VHT).

Signed-off-by: Shay Bar <shay.bar@celeno.com>
2020-12-02 13:41:18 +02:00
Jouni Malinen
183e72ae13 SAE-PK: Do not accept SAE-PK status code when no PK is configured
Make sae_status_success() more explicit by rejecting SAE-PK status code
when the AP is not configured with PK.

Fixes: 20ccf97b3d ("SAE-PK: AP functionality")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-10-20 00:37:01 +03:00
Thomas Pedersen
a28d127b1a AP: Reflect status code in SAE reflection attack test
When testing SAE reflection, the incoming commit may have the H2E status
code (126) or SAE-PK (127), but the test code in the AP was always
sending back status code 0. The STA would then reject the commit
response due to expecting H2E/SAE-PK status code.

Just reflect the incoming status code so the commit can be rejected
based on the SAE contents regardless of which variant of SAE was used.

Signed-off-by: Thomas Pedersen <thomas@adapt-ip.com>
2020-10-09 16:50:36 +03:00
Veerendranath Jakkam
debf3e2165 OCV: Work around for misbehaving STAs that indicate OCVC=1 without OCI
Some legacy stations copy previously reserved RSN capability bits,
including OCVC, in (Re)Association Request frames from the AP's RSNE but
do not indicate MFP capability and/or do not send OCI in RSN handshakes.
This is causing connection failures with such erroneous STAs.

To improve interoperability with such legacy STAs allow a workaround OCV
mode to be enabled to ignore OCVC=1 from the STA if it does not follow
OCV requirements in the first protected exchange. This covers cases
where a STA claims to have OCV capability, but it does not negotiate use
of management frame protection or does not include OCI in EAPOL Key msg
2/4, FT Reassociation Request frame, or FILS (Re)Association Reqest.

The previous behavior with ocv=1 is maintained, i.e., misbehaving STAs
are not allowed to connect. When the new workaround mode is enabled with
ocv=2, the AP considers STA as OCV capable on below criteria
- STA indicates both OCV and MFP capability
- STA sends OCI during connection attempt in a protected frame

Enabling this workaround mode reduced OCV protection to some extend
since it allows misbehavior to go through. As such, this should be
enabled only if interoperability with misbehaving STAs is needed.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-10-08 18:46:38 +03:00
Disha Das
a7f55f7f68 WPS: Enable SA Query checks for WPS AP
Initiate SA Query for a WPS+MFP AP. STA flag checks for MFP added for
Association Request frames that use WPS IE without RSNE. This is needed
to avoid giving an opportunity to skip the protection against
disconnections when WPS is enabled.

Signed-off-by: Disha Das <dishad@codeaurora.org>
2020-10-06 22:44:43 +03:00
Jouni Malinen
cab139ebc2 Fix a typo in a comment
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-09-22 23:31:20 +03:00
Karthikeyan Kathirvel
7e20502f7a hostapd: Resolved compiler uninitialized warning
Resolved the below warning
../src/ap/ieee802_11.c:4535:25: warning: 'reply_res' may be used
uninitialized in this function [-Wmaybe-uninitialized]
  if (sta && ((reply_res != WLAN_STATUS_SUCCESS &&
		                           ^
Since reply_res is been assigned inside an if condition and so
compiler treats reply_res as uninitalized variable

Initialize reply_res with WLAN_STATUS_UNSPECIFIED_FAILURE.

Fixes: 5344af7d22 ("FT: Discard ReassocReq with mismatching RSNXE Used value")
Signed-off-by: Karthikeyan Kathirvel <kathirve@codeaurora.org>
2020-09-22 23:29:18 +03:00
Rohan
e3ba0c4cd2 Do not start SA Query procedure without keys
The AP mode condition for initiating the SA Query procedure when
receiving a new (Re)Association Request frame used only association
state and MFP negotiation result without checking that the key exchange
has been completed. This can give rise to a corner case where the SA
Query procedure may get started after open association but before the
4-way handshake has been completed, resulting in open SA query frames
over the air.

Fix this by adding station authorized check in hostapd_notif_assoc() and
check_assoc_ies().

Signed-off-by: Rohan <drohan@codeaurora.org>
2020-09-22 23:11:30 +03:00
Veerendranath Jakkam
5ecb45a41c OCV: Use more granular error codes for OCI validation failures
Enhance the return values of ocv_verify_tx_params with enum to indicate
different OCI verification failures to caller.

Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org>
2020-09-11 15:23:28 +03:00
Chittur Subramanian Raman
96e63008fb OWE: Do not add DH Params element in AssocResp with PMKSA caching
As per RFC 8110 (Opportunistic Wireless Encryption), if the AP has the
PMK identified by the PMKID and wishes to perform PMK caching, it will
include the PMKID in the Association Response frame RSNE but does not
include the Diffie-Hellman Parameter element.

This was already addressed for most cases with owe_process_assoc_req()
not setting sta->owe_ecdh in case PMKSA caching is used. However, it was
possible to an old STA entry to maintain the initial sta->owe_ecdh value
if reassociation back to the same AP was used to initiate the PMKSA
caching attempt. Cover that case by adding an explicit check for the
time when the Association Response frame is being generated.

Signed-off-by: Chittur Subramanian Raman <craman@maxlinear.com>
2020-08-22 13:33:10 +03:00
Muna Sinada
621745917f Allow HE-without-VHT to add the Channel Switch Wrapper element
Modify the check for VHT to include an option for HE in
hostapd_eid_wb_chsw_wrapper() and its callers to allow the Channel
Switch Wrapper element with the Wide Bandwidth Channel Switch subelement
to be included in Beacon and Probe Response frames when AP is operating
in HE mode without VHT.

Signed-off-by: Muna Sinada <msinada@codeaurora.org>
2020-06-11 00:56:45 +03:00
Muna Sinada
d51b1b7a66 Move hostapd_eid_wb_chsw_wrapper() to non-VHT-specific file
Move hostapd_eid_wb_chsw_wrapper() from VHT specific ieee802_11_vht.c to
ieee802_11.c since this can be used for both HE and VHT. This commit
does not change any functionality to enable the HE use case, i.e., the
function is just moved as-is.

Signed-off-by: Muna Sinada <msinada@codeaurora.org>
2020-06-11 00:53:26 +03:00
Rajkumar Manoharan
1f72bbbefb AP: Reject association request upon invalid HE capabilities
Operation in the 6 GHz band mandates valid HE capabilities element in
station negotiation. Reject association request upon receiving invalid
or missing HE elements.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-06-10 21:34:38 +03:00
Jouni Malinen
363dbf1ece SAE-PK: Remove requirement of SAE group matching SAE-PK (K_AP) group
This was clarified in the draft specification to not be a mandatory
requirement for the AP and STA to enforce, i.e., matching security level
is a recommendation for AP configuration rather than a protocol
requirement.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-10 12:46:49 +03:00
Jouni Malinen
4ff0df39eb SAE-PK: Testing functionality to allow behavior overrides
The new sae_commit_status and sae_pk_omit configuration parameters and
an extra key at the end of sae_password pk argument can be used to
override SAE-PK behavior for testing purposes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-08 15:21:18 +03:00
Jouni Malinen
cc22fb1b86 SAE: Move H2E and PK flags to main sae_data
This maintains knowledge of whether H2E or PK was used as part of the
SAE authentication beyond the removal of temporary state needed during
that authentication. This makes it easier to use information about which
kind of SAE authentication was used at higher layer functionality.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-06 15:18:13 +03:00
Jouni Malinen
20ccf97b3d SAE-PK: AP functionality
This adds AP side functionality for SAE-PK. The new sae_password
configuration parameters can now be used to enable SAE-PK mode whenever
SAE is enabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00
Jouni Malinen
6b9e99e571 SAE-PK: Extend SAE functionality for AP validation
This adds core SAE functionality for a new mode of using SAE with a
specially constructed password that contains a fingerprint for an AP
public key and that public key being used to validate an additional
signature in SAE confirm from the AP.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-06-02 23:25:22 +03:00
Jouni Malinen
01ceb88c77 OCV: Report validation errors for (Re)Association Request frames
Add the OCV-FAILURE control interface event to notify upper layers of
OCV validation issues in FT and FILS (Re)Association Request frames.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 20:46:32 +03:00
Jouni Malinen
52579be860 OCV: Move "OCV failed" prefix to callers
Make reporting of OCV validation failure reasons more flexible by
removing the fixed prefix from ocv_verify_tx_params() output in
ocv_errorstr so that the caller can use whatever prefix or encapsulation
that is most appropriate for each case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-25 18:34:59 +03:00
Rajkumar Manoharan
dd2daf0848 HE: Process HE 6 GHz band capab from associating HE STA
Process HE 6 GHz band capabilities in (Re)Association Request frames and
pass the information to the driver.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-05-17 17:22:34 +03:00
Rajkumar Manoharan
db603634a9 HE: Add 6 GHz Band Capabilities element in Beacon and response frames
Construct HE 6 GHz Band Capabilities element (IEEE 802.11ax/D6.0,
9.4.2.261) from HT and VHT capabilities and add it to Beacon, Probe
Response, and (Re)Association Response frames when operating on the 6
GHz band.

Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org>
2020-05-17 16:47:18 +03:00
Jouni Malinen
5a04a76aa2 Ignore Management frames while AP interface is not fully enabled
It is possible for drivers to report received Management frames while AP
is going through initial setup (e.g., during ACS or DFS CAC). hostapd
and the driver is not yet ready for actually sending out responses to
such frames at this point and as such, it is better to explicitly ignore
such received frames rather than try to process them and have the
response (e.g., a Probe Response frame) getting dropped by the driver as
an invalid or getting out with some incorrect information.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-05-16 12:16:34 +03:00
Jouni Malinen
12c8eacf73 DPP: Allow version number to be overridden for testing purposes
"SET dpp_version_override <ver>" can now be used to request
wpa_supplicant and hostapd to support a subset of DPP versions. In
practice, the only valid case for now is to fall back from DPP version 2
support to version 1 in builds that include CONFIG_DPP2=y.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-05-04 00:37:45 +03:00
Jouni Malinen
5344af7d22 FT: Discard ReassocReq with mismatching RSNXE Used value
Discard the FT Reassociation Request frame instead of rejecting it
(i.e., do not send Reassociation Response frame) if RSNXE Used is
indicated in FTE, but no RSNXE is included even though the AP is
advertising RSNXE.

While there is not really much of a difference between discarding and
rejecting the frame, this discarding behavior is what the standard says
for this type of an error case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-04-14 16:37:35 +03:00
Jouni Malinen
d867e11811 FT: Remove and re-add STA entry after FT protocol success with PMF
Allow STA entry to be removed and re-added to the driver with PMF is
used with FT. Previously, this case resulted in cfg80211 rejecting STA
entry update after successful FT protocol use if the association had not
been dropped and it could not be dropped for the PMF case in
handle_auth().

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-04-04 21:53:10 +03:00
Jouni Malinen
7c021dec3a DPP2: Allow AP to require or reject PFS
The new hostapd configuration parameter dpp_pfs can be used to specify
how PFS is applied to associations. The default behavior (dpp_pfs=0)
remains same as it was previously, i.e., allow the station to decide
whether to use PFS. PFS use can now be required (dpp_pfs=1) or rejected
(dpp_pfs=2).

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-28 12:33:48 +02:00
Jouni Malinen
ca57d5f553 Return an enum from wpa_validate_wpa_ie()
This is more specific then returning a generic int and also allows the
compiler to do more checks.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-28 12:30:46 +02:00
Jouni Malinen
b7275a8142 Update STA flags to the driver immediately on disconnection
hostapd (and wpa_supplicant in AP mode) was internally updating the STA
flags on disconnection cases to remove authorization and association.
However, some cases did not result in immediate update of the driver STA
entry. Update all such cases to send out the update to the driver as
well to reduce risk of race conditions where new frames might be
accepted for TX or RX after the port authorization or association has
been lost and configured keys are removed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 17:51:03 +02:00
Jouni Malinen
b7366a942a FT: Omit RSNXE from FT protocol Reassociation Response when needed
The previous design for adding RSNXE into FT was not backwards
compatible. Move to a new design based on 20/332r3 to avoid that issue
by not include RSNXE in the FT protocol Reassociation Response frame so
that a STA not supporting RSNXE can still validate the FTE MIC
correctly.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-21 00:01:47 +02:00
Jouni Malinen
46e147fcdc Allow RSNE/RSNXE to be replaced in FT protocol Reassocation Response frame
This can be used to test station side behavior for FT protocol
validation steps.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-15 10:39:17 +02:00
Jouni Malinen
10223b501b SAE: Expose sae_write_commit() error cases to callers
Check whether an error is reported from any of the functions that could
in theory fail and if so, do not proceed with the partially filled SAE
commit buffer.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-08 16:59:42 +02:00
Jouni Malinen
7f1f69e897 SAE: Check hmac_sha256() result in sae_token_hash()
In theory, hmac_sha256() might fail, so check for that possibility
instead of continuing with undetermined index value that could point to
an arbitrary token entry.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-08 16:51:30 +02:00
Jouni Malinen
7dcc5f7feb SAE: Check sta pointer more consistently in testing code
send_auth_reply() could be called with sta == NULL in certain error
conditions. While that is not applicable for this special test
functionality for SAE, the inconsistent checks for the sta pointer could
result in warnings from static analyzers. Address this by explicitly
checking the sta pointer here.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-08 16:32:47 +02:00
Ilan Peer
e636bc855f WPA: Rename FILS wrapped data
IEEE P802.11az/D2.0 renamed the FILS Wrapped Data element,
removing the FILS prefix. Change the code accordingly.

Signed-off-by: Ilan Peer <ilan.peer@intel.com>
2020-02-29 23:30:55 +02:00
Jouni Malinen
200c7693c9 Make WEP functionality an optional build parameter
WEP should not be used for anything anymore. As a step towards removing
it completely, move all WEP related functionality to be within
CONFIG_WEP blocks. This will be included in builds only if CONFIG_WEP=y
is explicitly set in build configuration.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-29 17:45:25 +02:00
Jouni Malinen
f3bcd69603 Remove CONFIG_IEEE80211N build option
Hardcoded CONFIG_IEEE80211N to be included to clean up implementation.
More or less all new devices support IEEE 802.11n (HT) and there is not
much need for being able to remove that functionality from the build.
Included this unconditionally to get rid of one more build options and
to keep things simpler.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-02-22 19:20:44 +02:00
Sergey Matyukevich
e7d8842e6b OWE: Rename owe_assoc_req_process() parameter reason to status
In the function owe_assoc_req_process(), values assigned to the reason
argument imply that it should be renamed to status. Rename 'reason' to
'status' and modify the uses of owe_assoc_req_process() accordingly.

Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
2020-02-15 16:46:32 +02:00
Markus Theil
96a2a9a88b Send RM Enabled Capabilities element in (Re)Association Response frame
(Re)Association Response frames should include radio measurement
capabilities in order to let stations know if they can, e.g., use
neighbor requests.

I tested this commit with a Samsung S8, which does not send neighbor
requests without this commit and sends them afterwards.

Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de>
2020-02-10 06:51:42 +02:00