Commit graph

17688 commits

Author SHA1 Message Date
Jouni Malinen
0c88d1487c Debug print on CONFIG_NO_TKIP=y prevent RSNE with TKIP as group cipher
This makes the debug log clearer for one of the more likely cases of
"invalid group cipher" preventing RSNE parsing.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-04-01 11:13:10 +03:00
Sreeramya Soratkal
d5a9331f97 P2P: Copy only valid opclasses while filtering out 6 GHz channels
Copy channels from only valid operating classes in the source channel
list while preparing a non-6 GHz channel/op-classes list when the 6 GHz
band is not used for P2P GO negotiation.

Earlier, during preparation of P2P channels for GO negotiation, a union
of the GO channels and the P2P Client channels is used. While generating
the union in p2p_channels_union_inplace() as the first list itself has
P2P_MAX_REG_CLASSES number of entries, the operating classes from the
second list which are not in the first list were not getting considered.

Fix this by not setting the dst->reg_classes to too large a value.

Fixes: f7d4f1cbec ("P2P: Add a mechanism for allowing 6 GHz channels in channel lists")
Signed-off-by: Sreeramya Soratkal <quic_ssramya@quicinc.com>
2022-03-30 20:42:14 +03:00
Jouni Malinen
99c91beaad Sync with wireless-next.git include/uapi/linux/nl80211.h
This brings in nl80211 definitions as of 2022-03-11.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-03-28 19:40:23 +03:00
Jouni Malinen
1fb907a684 tests: wpa_supplicant AP mode - ACL management
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-24 23:22:42 +02:00
Chaoli Zhou
d9121335a0 wpa_cli: Add ACL and BTM control commands
Add AP mode commands for ACL and BTM into wpa_cli similarly to the way
these were already available in hostapd_cli.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2022-03-24 20:53:50 +02:00
Chaoli Zhou
00622fcfef Extend ACL to install allow/deny list to the driver dynamically
Support installing the updated allow/deny list to the driver if it
supports ACL offload. Previously, only the not-offloaded cases were
updated dynamically.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2022-03-24 20:53:50 +02:00
Chaoli Zhou
077bce96f3 Set drv_max_acl_mac_addrs in wpa_supplicant AP mode
hostapd code will need this for offloading ACL to the driver.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2022-03-24 20:53:50 +02:00
Chaoli Zhou
9828aba16e Support ACL operations in wpa_supplicant AP mode
Extend AP mode ACL control interface commands to work from
wpa_supplicant in addition to the previously supported hostapd case.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2022-03-24 20:53:50 +02:00
Chaoli Zhou
fd0d738ff4 Add return value to ACL functions
While these do not return error code within the current hostapd
implementation, matching functions in wpa_supplicant AP functionality
will have an error case and using consistent return type will make the
control interface code more consistent.

In addition, export hostapd_set_acl() in preparation for the
wpa_supplicant control interface implementation extension.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2022-03-24 20:53:28 +02:00
Chaoli Zhou
f5ac428116 Move ACL control interface commands into shared files
This is a step towards allowing these commands to be used from
wpa_supplicant.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2022-03-24 14:22:24 +02:00
Chaoli Zhou
9306956626 Add BSS-TM-QUERY event to indicate reception of BSS TM Query
This allows upper layers to learn about associated stations requesting
BSS transition management from the AP.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2022-03-24 00:56:53 +02:00
Chaoli Zhou
febcdf3243 Support BTM operations in wpa_supplicant AP mode
Extend AP mode BTM control interface commands to work from
wpa_supplicant in additiona to the previously support hostapd case.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2022-03-24 00:56:53 +02:00
Chaoli Zhou
0f8c6e9955 Move BTM control interface commands into shared file
This is a step towards allowing these commands to be used from
wpa_supplicant.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2022-03-24 00:56:53 +02:00
Chaoli Zhou
e059d8ece8 Update the Extended Capability element to struct sta_info
Only the SME-in-hostapd case updated sta->ext_capability while the
SME-in-the-driver case updated sta->qos_map_enabled, but not other items
related to the extended capabilities. This resulted in reduced
information being available through the control interface.

Use the shared helper function for both cases to get matching
information available regardless of the SME architecture.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2022-03-24 00:56:53 +02:00
Chaoli Zhou
eb2e6b56bb Enable BSS Transition Management in wpa_supplicant AP mode
Enable BTM capability for AP mode only and do not affect P2P GO mode.
This can be used for AP band steering when using wpa_supplicant to
control AP mode operations.

Signed-off-by: Chaoli Zhou <quic_zchaoli@quicinc.com>
2022-03-24 00:56:53 +02:00
Jouni Malinen
30ecf0181d DPP: Update Controller parameters when it was already started
dpp_configurator_params changes were taken into use in the
non-TCP/Controller case immediately on change, but that was not the case
for the Controller where this was updated only when explicitly starting
it. Change this to update dpp_configurator_params for the Controller as
well even if it is already running.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-24 00:56:53 +02:00
Jouni Malinen
b93d1083ee DPP: Fix msg_ctx for PKEX over TCP as Controller/Responder
PKEX Exchange Request handling in Controller used incorrect msg_ctx
pointer and that could result in event messages causing unexpected
behavior. Fix this by registering the correct msg_ctx pointer for these
cases.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-24 00:56:53 +02:00
Jouni Malinen
3085e1a671 hs20-osu-client: dNSName values from OSU server certificate for PPS MO
The previous change to allow EST server to use a different host name
ended up overriding the OSU server certificate information and the
incorrect server certificate was used when comparing the SP FQDN from
the PPS MO if the OSU and EST servers where different. Fix this by
keeping the dNSName from the SPP interaction and not storing the values
from the EST interaction.

Fixes: 0ce8d55a2e ("hs20-osu-client: Allow EST server to use different host name")
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-14 10:42:11 +02:00
Jouni Malinen
ce86f2446f DFS: Remove unnecessary variable
This was not used for anything else than checking the value returned by
the called function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-03-13 21:23:54 +02:00
Lorenzo Bianconi
760a5ae26b DFS: Switch to background radar channel if available
On radar detection on the main chain switch to the channel monitored
by the background chain if we have already performed the CAC there.
If a radar pattern is reported on the background chain, just select a
new random channel according to the regulations for monitoring.

Tested-by: Owen Peng <owen.peng@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
2022-03-13 21:23:10 +02:00
Lorenzo Bianconi
b63d953feb DFS: Enable CSA for background radar detection
Rely on hostapd_dfs_request_channel_switch() to enable CSA for
background radar detection switching back to the selected channel.

Tested-by: Owen Peng <owen.peng@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
2022-03-13 21:15:48 +02:00
Lorenzo Bianconi
25663241c5 DFS: Introduce hostapd_dfs_request_channel_switch()
This is a preliminary patch to add Channel Switch Announcement for
background radar detection.

Tested-by: Owen Peng <owen.peng@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
2022-03-13 21:12:43 +02:00
Lorenzo Bianconi
316a9dc63b DFS: Configure background radar/CAC detection
Introduce the capability to perform radar/CAC detection on an offchannel
radar chain available on some hardware (e.g., mt7915). This feature
allows to avoid CAC downtime switching on a different channel during CAC
detection on the selected radar channel.

Tested-by: Owen Peng <owen.peng@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
2022-03-13 21:06:51 +02:00
Lorenzo Bianconi
bad12effe8 nl80211: Radar background flag setting
Allow background radar detection flag to be set when specifying a
channel. This is a preliminary change to introduce radar/CAC background
detection support.

Tested-by: Owen Peng <owen.peng@mediatek.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
2022-03-13 20:48:06 +02:00
Lorenzo Bianconi
effd6111b8 DFS: Rely on channel_type in dfs_downgrade_bandwidth()
Add the capability to specify all 3 channel type possibilities in
dfs_downgrade_bandwidth(). This is a preliminary change to introduce
radar/CAC background detection support.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
2022-03-13 18:30:56 +02:00
Jouni Malinen
b37bbcc390 tests: Clear country configuration at the end of wpas_ap_async_fail
This was causing a failure in the following sequence:
wpas_ap_async_fail wpas_ctrl_country

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-03-13 18:26:45 +02:00
Jouni Malinen
7f661f942d tests: Make DPP relay tests more robust
Flush scan results to avoid failure caused by incorrect channel
selection based on an old result for the same BSSID. This was found with
the following test sequence:
ap_track_sta_no_auth dpp_network_intro_version_missing_req dpp_controller_relay_pkex

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-03-13 18:26:45 +02:00
Jouni Malinen
f9ba3d5c89 OpenSSL 3.0: Set SSL groups using SSL_set1_groups()
The mechanism using SSL_set_tmp_ecdh() has been obsoleted and
SSL_set1_groups() takes care of it instead.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-03-13 11:27:15 +02:00
Jouni Malinen
09c62aaf11 OpenSSL: Determine RSA key size without low-level routines
RSA low-level routines were deprecated in OpenSSL 3.0.
EVP_PKEY_get_bits(), or its older and more backwards compatible name
EVP_PKEY_bits() can be used here instead.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-03-13 11:27:12 +02:00
Jouni Malinen
b700a56e14 OpenSSL 3.0: Determine the prime length for an EC key group using EVP_PKEY
EVP_PKEY_get0_EC_KEY() and EC_KEY_get0_group() were deprecated in
OpenSSL 3.0. Add a version of this by determining the group without
fetching the EC_KEY itself from an EVP_PKEY.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-03-13 11:26:55 +02:00
Jouni Malinen
3c61f4db4c OpenSSL: Replace EC_GROUP_get_curve_GFp() calls with EC_GROUP_get_curve()
EC_GROUP_get_curve_GFp() was deprecated in OpenSSL 3.0.
EC_GROUP_get_curve() can be used to do the exact same thing. Add a
backwards compatibility wrapper for older OpenSSL versions to be able to
use this newer function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-03-13 11:26:47 +02:00
Jouni Malinen
e2cb0ca1ac OpenSSL 3.0: Implement crypto_ec_key_group() with new API
Get rid of the now deprecated EVP_PKEY_get0_EC_KEY() and
EC_KEY_get0_group() calls.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-03-13 11:26:36 +02:00
Jouni Malinen
7c8fcd6baf tests: Fix sigma_dut_cmd() processing for the return value
The first sock.recv() may return both the status,RUNNING and the
following status line if the sigma_dut process ends up being faster in
writing the result than the test script is in reading the result. This
resulted in unexpected behavior and odd error messages when parsing the
result in the test cases. Fix this by dropping the status,RUNNING line
from the result in case the buffer includes multiple lines.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-03-12 19:00:36 +02:00
Jouni Malinen
f6a53f64af OpenSSL: Replace EVP_PKEY_cmp() with EVP_PKEY_eq() when available
OpenSSL 3.0 deprecated EVP_PKEY_cmp() and replaced it with EVP_PKEY_eq()
which is not available in older versions.

Signed-off-by: Jouni Malinen <j@w1.fi>
2022-03-12 10:54:48 +02:00
Lubomir Rintel
5b093570dc D-Bus: Add 'wep_disabled' capability
Since commit 200c7693c9 ('Make WEP functionality an optional build
parameter'), WEP support is optional and, indeed, off by default.

The distributions are now catching up and disabling WEP in their builds.
Unfortunately, there's no indication prior to an attempt to connect to a
WEP network that it's not going to work. Add a capability to communicate
that.

Unlike other capabilities, this one is negative. That is, it indicates
lack of a WEP support as opposed to its presence. This is necessary
because historically there has been no capability to indicate presence
of WEP support and therefore NetworkManager (and probably others) just
assumes it's there.

Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Acked-by: Davide Caratti <davide.caratti@gmail.com>
2022-03-12 10:40:01 +02:00
Nicolas Escande
56a14cc720 DFS: Don't let cac_time_left_seconds overflow
There can be some discrepancy between the theorical dfs cac end (as
computed with the cac duration and cac start) and the actual cac end as
reported by the driver. During that window, the value of remaining time
outputed by the status command on the socket control interface will
display an overflowed, invalid value.
To mitigate this lets compute the remaining time as signed and display
it only when positive, otherwise defaulting it to 0.

Status command shows something like that when polling every seconds:

state=DFS
cac_time_seconds=60
cac_time_left_seconds=1
...
state=DFS
cac_time_seconds=60
cac_time_left_seconds=0
...
state=DFS
cac_time_seconds=60
cac_time_left_seconds=4294967294
...
state=DFS
cac_time_seconds=60
cac_time_left_seconds=4294967293
...
state=DFS
cac_time_seconds=60
cac_time_left_seconds=4294967292
...
state=ENABLED
cac_time_seconds=60
cac_time_left_seconds=N/A

Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
2022-03-12 10:39:43 +02:00
Alasdair Mackintosh
ae512c30a1 DPP: Fix uninitialised variable on error path
The current code generates a warning when compiled by Clang, because if
we goto 'fail:', password_len can be uninitialised when we pass it in to
bin_clear_free().

Note that the actual usage is safe, because bin_clear_free() ignores
the second argument if the first argument is NULL, but it still seems
worth cleaning up.

Signed-off-by: Alasdair Mackintosh <alasdair at google.com>
2022-03-12 10:36:03 +02:00
ArisAachen
3a157fe92f dbus: Set CurrentAuthMode to INACTIVE only if network is not selected
CurrentAuthMode should be set as a real auth type when authentication is
in progress. wpa_supplicant has a property "State" which indicates the
authentication stage already. I think setting auth mode as "INACTIVE" in
all auth progress stages is not a good idea, because sometimes we need
to handle this connection according to the auth type even when
authentication is not complete. For example, NetworkManager may recall
ask-password-dialog when auth mode is "wpa-psk" and "sae", try next
access point when auth mode is "EAP-xx" when password is incorrect.
Since "CurrentAuthMode" is set as "INACTIVE" in all not fully completed
situations, we do not know how to handle it.

Signed-off-by: Aris Aachen <chenyunxiong@unionitech.com>
Signed-off-by: ArisAachen <chenyunxiong@uniontech.com>
2022-03-12 10:30:26 +02:00
Jouni Malinen
0ce8d55a2e hs20-osu-client: Allow EST server to use different host name
The EST server does not have to be sharing the same host name with the
OSU server. Use the host name from the EST URL instead of the SPP server
URL when validating the EST server certificate.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-11 19:47:30 +02:00
Jouni Malinen
5eaf596e14 HTTP: Make URL available to the cert_cb
This makes it easier for non-SOAP cases to validate HTTP server name
(from the URL) match against the certificate.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-11 19:46:23 +02:00
Jouni Malinen
abed7978f6 HS 2.0 server: Event log entry on missing configuration for the realm
Make the error reason clearer in the event log for the case where the
requested realm has not been configured.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-11 19:44:58 +02:00
Purushottam Kushwaha
1192d5721b Android: Compile hs20-osu-client to /vendor/bin in test builds
hs20-osu-client compilation fails on Android O onwards because of
undefined reference for __android_log_print/__android_log_vprint.

Modify hs20-osu-client's Android.mk to include liblog library and use
tag 'hs20-osu-client' in logcat logs. Additionally, compile
hs20-osu-client to /vendor/bin in non-production builds.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-10 19:40:08 +02:00
Sumit Agre
1fee1c40c3 Enhance QCA vendor interface to indicate TWT required capability of AP
Add QCA_WLAN_TWT_NOTIFY command type to send event to userspace when AP
changes TWT required bit field in its capabilities.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-10 19:36:37 +02:00
Jhalak Naik
a192305a41 Add QCA vendor attributes for AFC support in external ACS
Add support for new QCA nested attributes to pass the AFC channel
information as part of the external ACS request command,
EXTERNAL_ACS_EVENT_CHAN_INFO.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-10 19:31:49 +02:00
Jouni Malinen
0c51cf624c tests: sigma_dut DPP Configurator (MUD URL, NAK change)
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-10 18:29:34 +02:00
Jouni Malinen
e792f38db8 tests: DPP PKEX with netAccessKey curve change
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-10 01:30:33 +02:00
Jouni Malinen
5ce5ed88a9 tests: Fix dpp_own_config_curve_mismatch to match implementation
This test case was assuming the Configurator would change the
netAccessKey curve every time based on the protocol keys, but that is
not the case anymore, so force that change here for a negative test.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-10 01:30:33 +02:00
Jouni Malinen
c4a36d050a tests: Fix dpp_intro_mismatch to match implementation
This test case was assuming the Configurator would change the
netAccessKey curve every time based on the protocol keys, but that is
not the case anymore, so force that change here for a negative test.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-10 01:30:33 +02:00
Jouni Malinen
de5939ef52 DPP: Allow Configurator net_access_key_curve to be changed
This is mainly for testing purposes to allow a Configurator to the curve
between provisioning cases. This would not work for real deployement
cases unless every Enrollee were reconfigured.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-10 01:30:33 +02:00
Jouni Malinen
9638452a62 DPP: Update Configurator to require same netAccessKey curve to be used
DPP network introduction requires all devices to use the same curve for
netAccessKey. Enforce that this happens based on hardcoding the curve
based on the first successful configuration object generation if no
explicit configuration of the curve was used.

Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
2022-03-09 23:08:06 +02:00