wpas_trigger_6ghz_scan() returns 1 on success and 0 on failure to
trigger the scan. Checking the return value to be less than zero is not
correct. This was supposed to check for success, i.e., greater than
zero.
Fixes: 42add3c27b ("Scan 6 GHz channels after change to 6 GHz-allowed regdom")
Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
In P2P_GROUP_ADD command and GroupAdd dbus method, frequency is passed
in as a parameter when restarting a persistent group. This is the group
operating frequency determined out of band. Use this pre-determined
frequency in P2P client as well to expedite the P2P scan.
Signed-off-by: Jintao Lin <jintaolin@chromium.org>
Expose whether a 6 GHz scan is in progress with the ScanInProgress6GHz
property and flush properties as soon as the property is updated, so
that platforms can choose not to disconnect while a 6 GHz scan is in
progress. Once the 6 GHz scan has completed and scan results have been
received, the ScanInProgress6GHz property is reset to false.
Signed-off-by: Ruth Mekonnen <rmekonnen@chromium.org>
When non_coloc_6ghz = false, the STA is expected to scan for colocated
APs. However, if the colocated AP is on a non-PSC channel, it will not
be detected during the 6 GHz-only scan because the frequency list is
limited to PSC channels. Even when the NL80211_SCAN_FLAG_COLOCATED_6GHZ
is set, the cfg80211 only scans a subset of the channels in the original
6 GHz scan request. Therefore, this patch adds non-PSC channels to the
original 6 GHz scan request.
Signed-off-by: Ruth Mekonnen <rmekonnen@chromium.org>
The test to scan for a single BSSID assumed that there is only a single
neighbor in the candidate list. Also do this optimization if there are
multiple neighbors but only one of them is valid.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
The preferred candidate list included bit just makes parsing the list
mandatory. The AP may still include a candidate list which we should use
to be able to optimize scanning. As such, always parse out the list but
still verify that if the list is not empty if the bit is set.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
There was an ancient code path to trigger a scan that was apparently
forgotten when the code was extended over time. It does not make any
sense to trigger a scan twice, so remove the earlier scan.
The earlier scan call was avoiding to trigger a new scan if a fixed
BSSID is configured. This seems like a reasonable restriction to do, so
add this check before starting a scan.
Consolidate everything so that scanning happens at the end of the
functions unless we bail out before. Add a "reset" label for all other
cases to ensure that we don't leave things in the a bad state.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
The dialog token must be non-zero. We are using this fact internally to
track the state in some cases, so ensure that the assumption is valid.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
According to Multiband Operation specification (r17, section 3.5.2),
a BSS Transition Management Request with the disassociation imminent
bit set should always be accepted.
This is enforced in case the request did not include a candidate list.
However, in case a candidate list was included but none of the APs in
the candidate list was found in the scan results, the request is
rejected.
Fix that by always accepting a request with the disassociation imminent
bit set even if no roaming candidate was found.
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Having it in wnm_is_bss_excluded() is more generic as it works for other
locations (e.g., MLD link selection). So move the test and add a check
for the abridged bit while at it. Note that without the abridged bit
check another check would be needed (e.g., checking wnm_dialog_token) to
ensure that there isn't a rejection unless a BTM is in progress.
compare_scan_neighbor_results() calls wpa_scan_res_match() which calls
wnm_is_bss_excluded() so the previous behavior is maintained for WNM
scan result processing.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Following commits will move more checks into wnm_is_bss_excluded().
Prepare for that by changing the logical flow so that further checks can
be inserted.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
compare_scan_neighbor_results() was taking an age parameter to check
whether the BSS has been seen recently. This was used historically in a
codepath when no new scan was done. However, the logic was changed in
commit 20ed289a78 ("WNM: Clean up old scan data processing") and the
parameter is not used at all anymore as it is replaced by a different
logic. Remove it.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
ieee802_11_rx_bss_trans_mgmt_req() is already dealing with a lot of
things including the decisions on how to act on the frame. Split out
candidate list parsing to make it easier to work with the function.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Commit 17a2aa822c ("WNM: Follow BTM procedure if the last link is
dropped") added code to store either the MLD MAC address or BSSID when
being disassociated. However, it did not save which one was stored
making the tests later on awkward.
Store whether it was an MLD MAC address or not and then do the test
accordingly.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Commit e508c070c4 ("WNM: Keep BTM information until connection
completes") changed the logic so that much of the information about a
transition management request will be kept around for longer. However,
doing this also implies that the scan logic can be called multiple times
with wnm_dialog_token being set.
Add a guard to bail out if the scan was not done for a BTM request. But,
add it after the transition candidate validity check so that we reset
the state when a new scan invalidated it.
However, invalidation does not make sense for any scan, primarily an ML
probe request during a connection attempt should not trigger
invalidation. So move the call to wnm_scan_process() further down in the
list to avoid issues.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
For MLO association, specify the destination address as the AP MLD MAC
address for sending EAPOL frames. Previously, this was set to the BSSID
in all cases (and hoped for the driver to map it to MLD MAC address when
needed).
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Add transition mode SSIDs to the SSID scan-list for bgscan. This is
currently missing and bgscan fails to scan for SSIDs on the OWE
transition network if one is currently used.
Signed-off-by: David Bauer <mail@david-bauer.net>
This allows to use the ROAM control interface command to force roaming
on a transition network. Previously, this was not possible, as the open
SSID is stored for the connection profile. Add a new function to also
return OWE transition networks if the profile SSID is set as the
transition-ssid for the OWE RSN network.
Signed-off-by: David Bauer <mail@david-bauer.net>
Use the RSN Override Link KDE to include the override variants of the
RSNE/RSNXE for each link so that all variants are verifies when
processing the protected EAPOL-Key message 3/4.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This allows all variants to be verified based on a protected frame to
achieve robust downgrade protection.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This replaces the use of the RSNE Override and RSNE Override 2 elements
with empty payload to indicate which RSNE variant was used.
In addition, this adds stricter validation of the RSNE in
(Re)Association Request frame to allow only the pairwise cipher suites
and AKMs listed in the indicated RSNE variant to be used.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
wpa_supplicant select_network() relies on fast_associate to reuse old
scan results. However, this approach does not apply in some cases in
Android:
1 - If the selected network is hidden, and the SSID is in Chinese,
Android switches between fallback SSIDs, necessitating a new scan for
switching between different hidden SSIDs.
2 - Similarly, if the selected SSID is OWE (Opportunistic Wireless
Encryption), and the OWE SSID bands have been changed, select_network()
requires a fresh scan to discover hidden OWE SSIDs.
To address these, enhance select_network() to trigger new scans instead
of relying on fast_associate. This improves network selection behavior
in Android.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Use current connection MLO capability to fetch the appropriate
RSNE/RSNXE variant while processing association event.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
wpa_supplicant was ignoring RSNXE also if the AP is not using valid
RSN overriding combination when the STA supports RSN overriding. Fix
this fallback to the RSNXE when AP is not using valid RSN overriding.
Signed-off-by: Veerendranath Jakkam <quic_vjakkam@quicinc.com>
Add support for RSNE/RSNXE Override elements. Use these elements to
determine AP's extended RSN parameters.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Update the version number for the build and also add the ChangeLog
entries for both hostapd and wpa_supplicant to describe main changes
between v2.10 and v2.11. Update the copyright years for the main
programs.
Signed-off-by: Jouni Malinen <j@w1.fi>
Using D-Bus, it is possible to add a valid UPnP service where 'query'
and 'response' are specified. In this case, memory for 'query' and
'response' is allocated but not used nor freed. Valgrind complains as
follows:
42 bytes in 1 blocks are definitely lost in loss record 32 of 75
at 0x484C214: calloc (vg_replace_malloc.c:1675)
by 0x41C673: wpabuf_alloc (wpabuf.c:124)
by 0x41C673: wpabuf_alloc_copy (wpabuf.c:162)
by 0x54F41A: wpas_dbus_handler_p2p_add_service (dbus_new_handlers_p2p.c:2762)
by 0x53B9A2: msg_method_handler (dbus_new_helpers.c:356)
by 0x53B9A2: message_handler (dbus_new_helpers.c:412)
by 0x4EAB4B8: dbus_connection_dispatch (in /usr/lib64/libdbus-1.so.3.19.13)
by 0x5495DF: dispatch_data (dbus_common.c:37)
by 0x5495DF: process_watch (dbus_common.c:73)
by 0x5495DF: process_watch_read (dbus_common.c:89)
by 0x41EE8E: eloop_sock_table_dispatch.part.0 (eloop.c:603)
by 0x41FA46: eloop_sock_table_dispatch (eloop.c:597)
by 0x41FA46: eloop_run (eloop.c:1233)
by 0x56A3CE: wpa_supplicant_run (wpa_supplicant.c:8074)
by 0x40DB06: main (main.c:393)
49 bytes in 1 blocks are definitely lost in loss record 37 of 75
at 0x484C214: calloc (vg_replace_malloc.c:1675)
by 0x41C673: wpabuf_alloc (wpabuf.c:124)
by 0x41C673: wpabuf_alloc_copy (wpabuf.c:162)
by 0x54F348: wpas_dbus_handler_p2p_add_service (dbus_new_handlers_p2p.c:2755)
by 0x53B9A2: msg_method_handler (dbus_new_helpers.c:356)
by 0x53B9A2: message_handler (dbus_new_helpers.c:412)
by 0x4EAB4B8: dbus_connection_dispatch (in /usr/lib64/libdbus-1.so.3.19.13)
by 0x5495DF: dispatch_data (dbus_common.c:37)
by 0x5495DF: process_watch (dbus_common.c:73)
by 0x5495DF: process_watch_read (dbus_common.c:89)
by 0x41EE8E: eloop_sock_table_dispatch.part.0 (eloop.c:603)
by 0x41FA46: eloop_sock_table_dispatch (eloop.c:597)
by 0x41FA46: eloop_run (eloop.c:1233)
by 0x56A3CE: wpa_supplicant_run (wpa_supplicant.c:8074)
by 0x40DB06: main (main.c:393)
Fix this ensuring that query and resp are freed both in the error and
non-error path of wpas_dbus_handler_p2p_add_service(). Also, add a test
in test_dbus.py to verify the correct behavior.
Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
SignalChange should be defined as a property of an interface.
Previously, it was incorrectly defined as a property of P2P peers.
Fixes: 7a7ce95746 ("dbus: Emit more information over D-Bus")
Signed-off-by: David Ruth <druth@chromium.org>
Non-AP MLD finds AP MLD's partner links by BSSID from the scan results.
However, if the scan results contain BSSs with the same BSSID but
different BSS information, the non-AP MLD might assign a wrong BSS to
one of the AP MLD's partner links.
Avoids the problem by using both BSSID and SSID to find the AP MLD's
partner links.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
The 'req_instance' parameter in transmit command should be
'req_instance_id'.
Fixes: e3f9ab3c3a ("NAN: USD in wpa_supplicant")
Signed-off-by: Chien Wong <m@xv97.com>
Instead of checking the latest scan results every second indefinitely,
add more latency between the checks in case the driver does not update
the time stamp value (i.e., does not report new Beacon frames during an
association).
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Make sure that sme_set_sae_group() doesn't select a group that was
previously rejected during this instance of SAE authentication.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
SAE rejected groups were not cleared in case of re-association to the
same ESS. Since new BSS can support different groups, keeping rejected
groups doesn't make sense and may result in AP rejecting the
authentication. Fix it.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
When the wiphy supports multiple bands and reports different capability
values between 5 GHz and 6 GHz channels, the 6 GHz mesh interface is
unable to correctly map the channel width in function
ibss_mesh_setup_freq(). This issue arises because the modes of 5 GHz and
6 GHz interfaces are the same (HOSTAPD_MODE_IEEE80211A) in supported
modes.
To address this, use function get_mode() to determine the appropriate
mode during mesh setup. This will iterates through all the hw_features
sets and ensures compatibility with the band of the channel supported in
hw_features set.
Signed-off-by: Harshitha Prem <quic_hprem@quicinc.com>
If SSID was not verified during the initial setup of an association, but
beacon protection was negotiated, try verify the SSID based on Beacon
frames that have been received after the first BIGTK has been
configured.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
This is a variant of wpa_bss_get_ie() to allow IEs to be checked from
only Beacon frames similarly to how wpa_bss_get_vendor_ie_beacon()
behaves for vendor specific elements.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
The new "bigtk_set=1" entry in the control interface STATUS command
output indicates that a BIGTK has been successfully configured. This
shows that beacon protection has been enabled for the current
association.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
Add a new "ssid_verified=1" entry into the control interface STATUS
command output if the SSID has been verified for the current
association. This verification may have been done implicitly (e.g., with
SAE H2E and FT protocol binding in the SSID into key derivation or with
FILS protecting the SSID element in the (Re)Association Request frame)
or explicitly with the recently added SSID protection mechanism during
the 4-way handshake.
Signed-off-by: Jouni Malinen <quic_jouni@quicinc.com>
In case the scan request handling fails, exit cleanly, i.e., without
setting internal state such as the 'scan_res_handler' pointer.
Signed-off-by: Ilan Peer <ilan.peer@intel.com>
The consumer of the link_bssid array assumes it is a NULL terminated
array of BSSIDs. As such, add one to the maximum number of links to
ensure that there is always a sentinel value.
Fixes: 5af986c75a ("MLD: Also mark links as failed after association failure")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
When ignoring a link BSSID the multi-link information was parsed out
into a struct ml_sta_link_info on the stack. However, this stack
variable went out of scope before it was used by passing the link_bssids
pointer array to another function.
Fixes: 5af986c75a ("MLD: Also mark links as failed after association failure")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Explicitly free the previously allocated copy if ServiceDiscoveryRequest
or Service DiscvoveryResponse parsing loop finds multiple instances of
the same dict entry.
Signed-off-by: Jouni Malinen <j@w1.fi>
Using D-Bus it is possible to request an invalid SD response where
"tlvs" is specified and there is an unknown key (e.g. "bar": "foo"). In
this case, "tlv" is allocated and then never used nor freed. Valgrind
complains as follows:
36 bytes in 1 blocks are definitely lost in loss record 20 of 74
at 0x484C214: calloc (vg_replace_malloc.c:1675)
by 0x41C673: wpabuf_alloc (wpabuf.c:124)
by 0x41C673: wpabuf_alloc_copy (wpabuf.c:162)
by 0x54FB94: wpas_dbus_handler_p2p_service_sd_res (dbus_new_handlers_p2p.c:3016)
by 0x53B9A2: msg_method_handler (dbus_new_helpers.c:356)
by 0x53B9A2: message_handler (dbus_new_helpers.c:412)
by 0x4EAB4B8: dbus_connection_dispatch (in /usr/lib64/libdbus-1.so.3.19.13)
by 0x5495DF: dispatch_data (dbus_common.c:37)
by 0x5495DF: process_watch (dbus_common.c:73)
by 0x5495DF: process_watch_read (dbus_common.c:89)
by 0x41EE8E: eloop_sock_table_dispatch.part.0 (eloop.c:603)
by 0x41FA46: eloop_sock_table_dispatch (eloop.c:597)
by 0x41FA46: eloop_run (eloop.c:1233)
by 0x56A3EE: wpa_supplicant_run (wpa_supplicant.c:8074)
by 0x40DB06: main (main.c:393)
Fix it ensuring that "tlv" is freed both in the error and non-error path
of wpas_dbus_handler_p2p_service_sd_res(). Also, add a test case in
test_dbus.py to verify correct behavior.
Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
Using D-Bus it is possible to trigger a valid UPnP SD request where
"tlv" is specified: in this case "tlv" is allocated, and then not used
nor freed. Valgrind complains as follows:
72 bytes in 2 blocks are definitely lost in loss record 46 of 68
at 0x484C214: calloc (vg_replace_malloc.c:1675)
by 0x41C673: wpabuf_alloc (wpabuf.c:124)
by 0x41C673: wpabuf_alloc_copy (wpabuf.c:162)
by 0x54F8B5: wpas_dbus_handler_p2p_service_sd_req (dbus_new_handlers_p2p.c:2928)
by 0x53B9A2: msg_method_handler (dbus_new_helpers.c:356)
by 0x53B9A2: message_handler (dbus_new_helpers.c:412)
by 0x4EAB4B8: dbus_connection_dispatch (in /usr/lib64/libdbus-1.so.3.19.13)
by 0x5495DF: dispatch_data (dbus_common.c:37)
by 0x5495DF: process_watch (dbus_common.c:73)
by 0x5495DF: process_watch_read (dbus_common.c:89)
by 0x41EE8E: eloop_sock_table_dispatch.part.0 (eloop.c:603)
by 0x41FA46: eloop_sock_table_dispatch (eloop.c:597)
by 0x41FA46: eloop_run (eloop.c:1233)
by 0x56A3CE: wpa_supplicant_run (wpa_supplicant.c:8074)
by 0x40DB06: main (main.c:393)
Fix it ensuring that "tlv" is freed, both in the error and non-error
path of wpas_dbus_handler_p2p_service_sd_req(). Also, add a test case in
test_dbus.py to verify correct behavior.
Signed-off-by: Davide Caratti <davide.caratti@gmail.com>
