Commit graph

533 commits

Author SHA1 Message Date
Yuhao Zheng
dc7785f845 wpa_supplicant: Add PKTCNT_POLL command to get TX/RX packet counters
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2012-09-05 17:02:02 +03:00
Jouni Malinen
eb7719ff22 Add support for using GCMP cipher from IEEE 802.11ad
This allows both hostapd and wpa_supplicant to be used to derive and
configure keys for GCMP. This is quite similar to CCMP key
configuration, but a different cipher suite and somewhat different rules
are used in cipher selection. It should be noted that GCMP is not
included in default parameters at least for now, so explicit
pairwise/group configuration is needed to enable it. This may change in
the future to allow GCMP to be selected automatically in cases where
CCMP could have been used.

This commit does not included changes to WPS or P2P to allow GCMP to be
used.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-29 11:52:15 +03:00
Wei-Jen Lin
e3e234fa35 nl80211: Set P2P multichan concurrency based on interface combinations
Use the NL80211_IFACE_COMB_NUM_CHANNELS value > 1 as a trigger for
enabling support for P2P multichannel channel concurrency. This does not
handle all possible details of enforcing driver capabilities, but it is
a good first step for allowing nl80211 drivers to enable multichannel
concurrency.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-08-28 19:31:58 +03:00
Jouni Malinen
75227f3ada nl80211: Print an error if WDS STA interface cannot be set up
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-19 18:28:55 +03:00
Jouni Malinen
067ffa2696 Convert os_realloc() for an array to use os_realloc_array()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 21:21:23 +03:00
Jouni Malinen
f9884c096a Convert os_zalloc() for an array to use os_calloc()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 20:44:21 +03:00
Jouni Malinen
1d0c6fb1eb nl80211: Fix re-enabling of 802.11b rates after P2P use
Commit a11241fa11 removed the 802.11b rate
enabling/disabling code from wpa_driver_nl80211_set_mode() and while
doing that, removed the only place where drv->disabled_11b_rates was
set. Fix this by updating the flag in nl80211_disable_11b_rates(). In
addition, re-enable the 802.11b rates when changing to non-P2P mode.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-10 11:48:57 +03:00
Rajkumar Manoharan
edb9bfba89 nl80211: Disable 11b rates on configuring P2P interface
Right now 11b rates are masked out while creating a P2P interface,
but this is always failing as the interface is down. Most drivers
allow to configure rates only when the interface is UP and running.
So let us disable 11b rates when interface type is changed into a
P2P type and it is UP and running.

Signed-hostap: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2012-08-10 11:35:33 +03:00
Jouni Malinen
df2f9ec6b2 nl80211: Add nla_put_u32() wrapper for Android
The system/core/libnl_2 re-implementation in AOSP does not include
nla_put_u32().

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-09 18:45:39 +03:00
Jouni Malinen
95ac3bf49f nl80211: Share common function for scan parameters
trigger_scan and start_sched_scan can share code for building the
common attributes.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:48:52 +03:00
Jouni Malinen
f0494d0f95 nl80211: Check nla_put_nested() return value and handle errors
Couple of functions did not verify that nla_put_nested() succeeded. Fix
these by checking the return value and handling error cases cleanly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:27:55 +03:00
Jouni Malinen
6afbc3d698 nl80211: Fix netlink error paths in sched_scan() handler
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-07 17:11:08 +03:00
Paul Stewart
21270bb4b3 Fix a couple memory leaks
Found using valgrind.

Signed-hostap: Paul Stewart <pstew@chromium.org>
2012-08-04 20:10:08 +03:00
Jouni Malinen
e509167495 Add new drv_flag for indicating user space AP MLME
This makes it easier for hostapd to determine at runtime which
operations to use.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-01 10:34:35 +03:00
Thomas Pedersen
bf8d6d2430 nl80211: Support setting sched scan RSSI threshold
Allow the user to configure an RSSI threshold in dBm below which the
nl80211 driver won't report scan results. Currently only supported
during scheduled (PNO) scans.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-07-25 16:56:43 +03:00
Mahesh Palivela
990933fb1d nl80211: Save VHT capabilities from the driver
Save VHT capabilities coming through nl80211 within hostapd.

Signed-hostap: Mahesh Palivela <maheshp@posedge.com>
2012-07-04 21:42:56 +03:00
Thomas Pedersen
1b487b8b1e nl80211: Handle CH_SWITCH event
Some drivers may independently decide to switch channels. Handle this by
updating the hostapd and wpa_supplicant AP and GO configuration.

Signed-hostap: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
2012-06-25 14:45:14 +03:00
Johannes Berg
cad0f50e02 nl80211: Simplify cbmsg buffer
The control message received from the kernel needs some space, but
there's no need for the strange typing that breaks clang compilation.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-06-23 20:37:09 +03:00
Johannes Berg
24b5bd8b42 nl80211: Use safe list iteration
In certain cases like PBC session overlap it appears to be possible that
an interface is removed due to an event handled on it, this leads to
list corruption. Use safe iteration to prevent this issue.

Reported-by: Nirav Shah <nirav.j2.shah@intel.com>
Reported-by: Neeraj Kumar Garg <neerajkg@broadcom.com>
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
intended-for: hostap-1
2012-06-04 20:25:11 +03:00
Jouni Malinen
b5671498bf nl80211: Use wait_time with AP mode driver SME for offchannel
When sending an offchannel frame (mainly, P2P Invitation Request), the
wait_time parameter was hardcoded to 0 for drivers that implement AP
mode SME. This is not correct and can cause problems for drivers that
support offloading of off-channel operations with driver/firmware based
AP SME.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-11 18:24:31 +03:00
Jouni Malinen
2e3e456623 nl80211: Add more debug info on NL80211_CMD_FRAME uses
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-05-11 18:22:53 +03:00
Jithu Jance
d3bd0f057c nl80211: Extend shared_freq to handle AP/GO mode interfaces
Signed-hostap: Jithu Jance <jithu@broadcom.com>
2012-04-08 20:44:05 +03:00
Jouni Malinen
873d0fcfd3 nl80211: Skip set_mode event subscription during deinit
There is no need to subscribe to event messages during deinit process,
so skip this to avoid unnecessary operations and to keep the debug logs
a bit cleaner.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-06 18:58:44 +03:00
Jouni Malinen
2e9f078c8d nl80211: Indicate disconnect event as deauthentication
This was previously indicated as disassociation, but the P2P group
session ending case expect a deauthentication notification. Since the
cfg80211 disconnection event does not really indicate which frame was
used, the easiest approach for now seems to be to just indicate these
as deauthentication events.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-04-03 17:11:22 +03:00
Eliad Peller
3c29244eb7 P2P: Add deinit_p2p_cli op to clear P2P client driver state
On P2P group removal, the GO is deinitialized correctly (and the vif
mode is set back to sta in case of nl80211), but the P2P client mode
wasn't deinitialized, and the nl80211 vif stays in P2P client mode.

Add a new deinit_p2p_cli op (similar to deinit_ap), which currently only
sets the interface back to station mode.

Signed-hostap: Eliad Peller <eliad@wizery.com>
intended-for: hostap-1
2012-04-01 21:41:23 +03:00
Johannes Berg
baf513d695 Pass signal strength through, fix units
The signal strength is currently never used as the only driver reporting
it is nl80211 which uses IEEE80211_RADIOTAP_DB_ANTSIGNAL which is never
populated by the kernel. The kernel will (soon) populate
IEEE80211_RADIOTAP_DBM_ANTSIGNAL instead though, so use that.

Also, since it was never really populated, we can redefine the signal
field to be in dBm units only.

My next patch will also require knowing the signal strength of probe
requests throughout the code (where available), so add it to the
necessary APIs.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 18:48:12 +03:00
Johannes Berg
da873dbb06 nl80211: Report signal strength from nl80211
Report signal strength from nl80211 events to the higher layers.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2012-04-01 12:39:33 +03:00
Bala Shanmugam
1f6c0ab872 Allow background scan period to be configured
A network block specific background scan period can now be configured
for drivers that implement internal background scan mechanism for
roaming and BSS selection.

Signed-hostap: Bala Shanmugam <bkamatch@qca.qualcomm.com>
2012-03-30 15:20:35 +03:00
Vasanthakumar Thiagarajan
a0133ee1c9 nl80211: Make use of driver's capability to detect inactive stations
When drivers advertise their capability to free up inactive
stations based on ap_max_inactivity, send the inactivity period
timeout to driver in NL80211_ATTR_INACTIVITY_TIMEOUT. This
introduces a WPA_DRIVER_FLAGS (WPA_DRIVER_FLAGS_INACTIVITY_TIMER)
so that the inactivity period will be sent only when this capability
bit is set.

Signed-hostap: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com>
2012-03-27 20:49:44 +03:00
Aarthi Thiruvengadam
e1bd4e1934 nl80211: Fix deauth/disassoc for AP mode SME-in-driver case
When the driver (or firmware) implements AP mode SME, the use of raw
management frame TX functions is not working properly at the moment. As
an initial step, convert these AP mode operations to use
NL80211_CMD_DEL_STATION and do not claim that driver provides TX status
for deauth/disassoc frames. While this does not address all use cases
(e.g., reason code is not specified in the command), this fixes number
of issues where the station does not get disconnected properly.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-03-14 14:06:06 -10:00
Jouni Malinen
d1f4942ba1 nl80211: Filter unexpected interface added/up events
It looks like a RTM_NEWLINK event claiming the interface to be UP is
delivered just before removing an interface after having first indicated
that the interface was going down/removed. Ignore this event if the
interface is not present anymore at the moment the event is processed.
This fixes issues where an interface that was re-added after being
removed did not get reconfigured properly.

Signed-hostap: Jouni Malinen <j@w1.fi>
intended-for: hostap-1
2012-02-18 13:13:23 +02:00
Jouni Malinen
8a6a1e1b14 nl80211: Indicate p2p_probe in debug log as scan parameter
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-18 12:39:01 +02:00
Antonio Quartulli
e640888c5e IBSS RSN: Support authorization
In IBSS RSN cfg80211/mac80211 now waits for userspace to authorize new
stations. This patch makes wpa_supplicant notify the driver when a
station can be considered authorized.

Signed-hostap: Antonio Quartulli <ordex@autistici.org>
2012-02-12 21:12:22 +02:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Ben Greear
80e8a5eef1 Support HT capability overrides
This allows HT capabilities overrides on kernels that
support these features.

MCS Rates can be disabled to force to slower speeds when using HT.
Rates cannot be forced higher.

HT can be disabled, forcing an 802.11a/b/g/n station to act like
an 802.11a/b/g station.

HT40 can be disabled.

MAX A-MSDU can be disabled.
A-MPDU Factor and A-MPDU Density can be modified.

Please note that these are suggestions to the kernel. Only mac80211
drivers will work at all. The A-MPDU Factor can only be decreased and
the A-MPDU Density can only be increased currently.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2012-01-29 21:01:31 +02:00
Yogesh Ashok Powar
3dd1d8906d nl80211: Subscribe management frames for WPA_IF_AP_BSS types
In multiple BSSes scenario for the drivers that do not use
monitor interface and do not implement AP SME, RX MGMT
frame subscription happens only for the default bss (first_bss).

Subscribe for RX MGMT frames for such BSSes.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
2012-01-29 12:34:38 +02:00
Yogesh Ashok Powar
a7a6af4cba nl80211: Derive frequency for BSSes other than the first
Commit e4fb216769 moved frequency
storage from driver struct to bss struct and is assigned in
wpa_driver_nl80211_set_freq. As this wpa_driver_nl80211_set_freq is
triggered only on the first_bss, bss->freq for other BSSes is never
being set to the correct value. This sends MLME frames on frequency zero
(initialized value of freq) for BSSes other than the first.

To fix this derive frequency value from first_bss.

Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com>
2012-01-29 12:34:32 +02:00
Nicolas Cavallari
913e3cf794 nl80211: Add IBSS BSSID fixing support
If a BSSID and fixed-bssid are requested, fix the BSSID, so
the driver does not attempt to merge.

Signed-hostap: Nicolas Cavallari <cavallar@lri.fr>
2012-01-28 11:35:32 +02:00
Jouni Malinen
552310680c nl80211: Fix send_action on off-channel in P2P GO role
A P2P Action frame may need to be sent on another channel than the GO's
operating channel. This information was lost in
wpa_driver_nl80211_send_action() in the case the interface was in AP
mode. Pass the frequence and related parameters to send_mlme mechanism
to allow the correct frequence to be used with the send frame command in
AP (P2P GO) mode.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2012-01-26 17:44:11 +02:00
Deepthi Gowri
d8d6b32eec nl80211: P2P: Pass cookie parameter in send action frame
The cookie value needs to be fetched in GO mode, too, to be able to
indicate TX status callbacks with drivers that handle AP mode SME
functionality internally. This fixes issues with client discoverability
where TX status callback for GO Discoverability Request is needed to
trigger the GO to send Device Discoverability Response.
2012-01-23 20:12:06 +02:00
Jouni Malinen
3d9975d5b0 Do not trigger fast reconnection on locally generated deauth/disassoc
The deauthentication and disassociation events from nl80211 were being
processed identically regardless of whether the frame was generated by
the local STA or the AP. This resulted in fast reconnection mechanism
getting triggered even in the case where the disconnection was detected
locally (e.g., due to beacon loss) while this was supposed to happen
only in the case where the AP is sending an explicit Deauthentication
or Disassociation frame with a specific reason code.

Fix this by adding a new deauth/disassoc event variable to indicate
whether the event was generated locally.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-01-01 18:55:58 +02:00
Jouni Malinen
ee9fc67ab7 nl80211: Mark Beacon event debug excessive
This can show up way too frequently in AP mode to make debug logs
readable at debug level.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-30 14:10:15 +02:00
Jouni Malinen
b9fd8ce804 nl80211: Fix NL80211_CMD_FRAME to not try offchannel without driver support
The offchanok parameter is hardcoded to one in number of paths and that
added NL80211_ATTR_OFFCHANNEL_TX_OK attribute to NL80211_CMD_FRAME
unconditional. cfg80211 rejects this with EINVAL if the driver does not
indicate support for offchannel TX. Fix this by not requesting
offchannel TX depending on driver capabilities. Remain-on-channel
operation was used for those cases anyway, so the additional attribute
was not really needed for these in the first place.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-29 14:15:31 +02:00
Jouni Malinen
0d891981db nl80211: Do not stop AP mode Probe Request reporting on Listen stop
When nl80211_setup_ap() has enabled Probe Request reporting, this must
not be disabled when P2P Listen state is stopped to avoid breaking AP
mode operations. This could happen, e.g., if a Probe Request frame was
received from a P2P device that the we are trying to invite to our group
(i.e., when operating in GO role). p2p_probe_req_rx() calls
p2p_invite_start() in this case and that ends up calling
p2p->cfg->stop_listen() which calls probe_req_report() driver op.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-27 20:32:29 +02:00
Jouni Malinen
a6cc0602dd nl80211: Fix mgmt RX for device SME in AP mode without monitor
Drivers that use device SME in AP mode may still need to be
subscribed for Action frame RX when monitor interface is not used.
This fixes number of P2P GO operations with ath6kl.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-23 18:15:07 +02:00
Jouni Malinen
536062f274 nl80211: Fix use_monitor driver capability for non-mac80211 drivers
Poll command may be enough for mac80211 to figure out whether monitor
interface is to be used, but this change did not take into account
non-mac80211 drivers that support AP mode without monitor interface.
For example, ath6kl needs to get use_monitor disabled.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-23 18:13:01 +02:00
Jouni Malinen
82554b100c nl80211: Show station flush failures in debug log
Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-23 18:12:07 +02:00
Jouni Malinen
36488c054c nl80211: Add debug prints for mgmt RX subscription
This makes it easier to figure out which management frames has been
subscribed to for RX events.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-23 18:10:59 +02:00
Jouni Malinen
b088cf82c9 Android: nl80211: Work around limited genl_ctrl_resolve()
Android ICS system/core/libnl_2 has very limited genl_ctrl_resolve()
implementation that cannot handle names other than nlctrl. Work
around that by implementing more complete genl_ctrl_resolve()
functionality within driver_nl80211.c for Android builds.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-12-21 13:33:41 +02:00
Jason Young
5d06163714 AP: Pass station's WMM configuration to driver wrappers
This updates a previous patch did more or less the same thing by
providing the qosinfo as a single variable to the driver wrappers.

Signed-hostap: Jason Young <jason.young@dspg.com>
2011-12-17 12:38:06 +02:00
Jouni Malinen
9e088e743d nl80211: Fix memory leaks on nla_put_failure error paths
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-17 12:27:11 +02:00
Jason Young
5883168ae0 nl80211: Fix memory leak on nla_put_failure error paths
Signed-hostap: Jason Young <jason.young@dspg.com>
2011-12-17 12:19:36 +02:00
Eliad Peller
774bfa62ce nl80211: Send uapsd_queues and max_sp values on STA addition
When a new station is added, send its configured WMM params.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-12-17 11:59:34 +02:00
Eliad Peller
70619a5d8a AP: Consider U-APSD driver support
Check whether the driver advertises support for U-APSD
in AP mode, and evaluate wmm_uapsd only in this case.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-12-17 11:45:53 +02:00
Jouni Malinen
a97bde0af4 Android: Fix PNO start function conversion
The wpa_hexdump_ascii() call did not get converted properly and this
was missed becaused of it getting defined out from the build. Anyway,
this better use the correct variable names should that debug print
ever be enabled for Android.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-15 01:06:02 +02:00
Jouni Malinen
aa543c0c33 nl80211: Fix CONFIG_TDLS=y build
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-12 16:32:07 +02:00
Jouni Malinen
671a50392d nl80211: Clean up info on netdev or nl80211 not found errors
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-11 18:51:55 +02:00
Arik Nemtsov
5ed3354617 nl80211: Send Probe Response template to the driver
Pass the raw Probe Response template to kernel via netlink using the
set_ap() driver callback. The data is sent as one of the Beacon
attributes.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Arik Nemtsov
562c9d976e nl80211: Propagate Probe Response offload capabilities from kernel
Translate nl80211 flags to wpa_supplicant flags for Probe Response
offload support. The existence of the nl80211 PROBE_RESP_OFFLOAD_SUPPORT
attribute means Probe Response offload is supported. The value of the
attribute is a bitmap of supported protocols.

Signed-hostap: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
2011-12-10 21:11:32 +02:00
Johannes Berg
341eebee38 nl80211: Store own address in BSS
Storing the address in the BSS instead of the DRV struct makes it usable
for hostapd and thus gets rid of the linux_get_ifhwaddr() call when
receiving a spurious frame.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-10 11:56:31 +02:00
Jouni Malinen
481234cf1a nl80211: Remove unnecessary struct nl80211_handles wrapper
Since the nl_cache is not used anymore, there is no need for maintaining
the struct nl80211_handles wrapper for struct nl_handle. Clean this up
by using nl_handle directly.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-06 19:47:59 +02:00
Johannes Berg
3088e4e52d nl80211: Listen to unexpected 4addr events
Monitor-less AP mode had lost the ability to do
4addr WDS, this adds it back.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 19:32:41 +02:00
Johannes Berg
d6c9aab8d2 nl80211: Use global event socket for multicast events
This is a rewrite of Ben Greear's patch, making the
nl80211 code use just a single multicast event socket.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 19:30:43 +02:00
Johannes Berg
e32ad281ca nl80211: Register for Beacon frames in AP mode
When running AP mode, we need to receive beacons over overlapping BSSes
to handle protection. Use the new nl80211 command for this. As the
command works per wiphy (and we don't want to receive the Beacon frames
multiple times) add an abstraction that keeps track of per-wiphy data.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 18:39:57 +02:00
Johannes Berg
02bb32c393 nl80211: Subscribe to spurious class3 frame events
These events are necessary to send deauth frames to
stations sending spurious data frames. Subscribe to
them on the per-BSS event socket.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 18:29:45 +02:00
Johannes Berg
a11241fa11 nl80211: Use nl80211 for mgmt TX/RX in AP mode
To achieve this, multiple things are needed:
 1) since hostapd needs to handle *all* action frames,
    make the normal registration only when in a non-AP
    mode, to be able to do this use the new socket
 2) store the frequency in each BSS to be able to give
    the right frequency to nl80211's mgmt-tx operation
 3) make TX status processing reject non-matched cookie
    only in non-AP mode

The whole thing depends on having station-poll support
in the kernel. That's currently a good indicator since
the kernel patches are added together.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-06 18:24:00 +02:00
Jouni Malinen
8c3ba0784e nl80211: Use driver event to indicate failure on authentication retry
When using authentication retry within driver_nl80211.c, a failure on the
second attempt has to be indicated with a driver event since the return
code from wpa_driver_nl80211_authenticate() is not actually delivered to
the core code in that case.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-04 22:28:30 +02:00
Jouni Malinen
536fd62dba nl80211: Recover from auth req ENOENT with a scan
cfg80211 rejects NL80211_CMD_AUTHENTICATE with ENOENT if the BSS entry
for the target BSS is not available. This can happen if the cfg80211
entry has expired before wpa_supplicant entry (e.g., during a suspend).
To recover from this quickly, run a single channel scan to get the
cfg80211 entry back and then retry authentication command again. This
is handled within driver_nl80211.c to keep the core wpa_supplicant
implementation cleaner.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-04 21:53:56 +02:00
Johannes Berg
9f12614b8c nl80211: Do not encrypt IEEE 802.1X WEP EAPOL
Set the NL80211_ATTR_CONTROL_PORT_NO_ENCRYPT flag for nl80211 to tell
drivers (mac80211) to not encrypt the EAPOL frames for WEP IEEE 802.1X.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:46:12 +02:00
Johannes Berg
cc7a48d1f4 nl80211: Allocate nl CB for BSS RX
In preparation for things that receive on a BSS-specific handle,
allocate a CB for it and hook it up to receive functions.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:14:53 +02:00
Johannes Berg
f06aedd92f nl80211: Rename process_event
The next patch will add process_bss_event, rename process_event to
process_drv_event to differentiate between them.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:10:44 +02:00
Johannes Berg
a4ae123c3f nl80211: Pass cb to eloop function
By passing the nl_cb as the context to the eloop function we can
(in the next patch) use the same eloop function for BSS events.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:07:54 +02:00
Johannes Berg
1afc986d84 nl80211: Use one CB for driver event RX
There's no need to clone the CB all the time
and then assign it, just use a constant one.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 20:00:11 +02:00
Johannes Berg
e4fb216769 nl80211: Store frequency in bss struct
Storing the frequency in the bss struct allows using it for frame
commands in AP mode and not relying on the driver struct as much, which
is good for hostapd mode.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 19:55:22 +02:00
Johannes Berg
3fd1cefb81 nl80211: Move AP SME setup to mode change
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 19:47:01 +02:00
Johannes Berg
32ab485503 nl80211: Use socket error queue for EAPOL TX status
This will allow getting TX status for EAPOL frames
sent as data frames if the driver supports it.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-12-03 19:32:23 +02:00
Jouni Malinen
aef85ba204 nl80211: Ignore interface up event if interface is down
The RTM_NEWLINK even can have IFF_UP flag even if the interface is
down. Do not generate EVENT_INTERFACE_ENABLED event based on such a
message.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 13:18:57 +02:00
Jouni Malinen
3b1c7bfdc5 nl80211: Use binary hexdump for scan IEs instead of text
The IEs are binary data, so there is not much point in trying
to show them as ASCII data in debug prints.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 12:47:34 +02:00
Jouni Malinen
e5693c4775 Merge set_rate_sets() driver_ops into set_ap()
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 12:16:03 +02:00
Jouni Malinen
5f17b3ee9f Remove unused parameters from set_rate_sets()
Only setting of the basic rate set was supported, so remove the
unused parameters.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:57:13 +02:00
Jouni Malinen
d03e8d118c nl80211: Merge ap_isolate configuration into nl80211_set_bss()
Signed-hostap: Jouni Malinen <j@w1.fi>
2011-12-03 11:43:18 +02:00
Dmitry Shmidt
216eede830 Android: nl80211: Add Android specific PNO configuration
This is based on the Android driver_cmd changes that are converted to
use the sched_scan/stop_sched_scan driver_ops for the case where the
driver does not support the new nl80211 commands.

Change-Id: Iaedc340f84650af422bd2ea57d2a8b0a9d4a5330
Signed-off-by: Dmitry Shmidt <dimitrysh@google.com>
2011-11-29 15:18:52 +02:00
Jouni Malinen
fb67eec6f8 nl80211: Do not set sched_scan filter if driver does not support it
cfg80211 will reject the NL80211_CMD_START_SCHED_SCAN if too many
match sets are requested. To avoid being completely unable to start
any scheduled scans, skip setting these filters if the driver did
not advertise support for large enough number of match sets.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-25 17:46:00 +02:00
Jouni Malinen
29f338af26 nl80211: Implement set_p2p_powersave for legacy_ps changes
This adds initial implementation of set_p2p_powersave to allow legacy PS
mode to be configured. P2P PS parameters are not yet supported.

Signed-hostap: Jouni Malinen <jouni@qca.qualcomm.com>
2011-11-25 13:11:22 +02:00
Johannes Berg
88df0ef74f nl80211: Set offchannel-OK selectively
It's not really valid to send off-channel in all cases,
so pass whether it should be allowed or not and don't
set it in the AP case.

Also, to get the right ifindex for hostapd, pass a bss
pointer instead of the drv pointer.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 19:56:34 +02:00
Johannes Berg
221a59c9b6 nl80211: Move preq NL handle into BSS
Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 19:48:49 +02:00
Jouni Malinen
ddc5327139 nl80211: Add no_ack support for NL80211_CMD_FRAME
This is needed to allow no-ACK operation with Probe Response frames
in P2P Listen state.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-19 19:32:05 +02:00
Helmut Schaa
fab2533604 nl80211: Implement noack policy for send_mlme
Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2011-11-19 19:22:13 +02:00
Helmut Schaa
8cfa3527e1 Allow MLME frames to be sent without expecting an ACK (no retries)
In some situations it might be benefical to send a unicast frame without
the need for getting it ACKed (probe responses for example). In order to
achieve this add a new noack parameter to the drivers send_mlme callback
that can be used to advise the driver to not wait for an ACK for this
frame.

Signed-hostap: Helmut Schaa <helmut.schaa@googlemail.com>
2011-11-19 19:02:05 +02:00
Johannes Berg
397188521d nl80211: Support in-kernel station poll
If the kernel supports this, don't use manual null
data frame transmissions. This is one thing to get
rid of cooked monitor interfaces.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 14:23:46 +02:00
Johannes Berg
d12dab4c6f nl80211: Use non-receiving socket for EAPOL TX
The non-monitor TX currently uses a normal L2 abstraction
socket, but that will also receive frames we don't want,
so use a plain socket that isn't bound for RX. This might
be possible using the L2 abstraction, but we need a plain
socket later for getting TX status events here.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 14:00:53 +02:00
Johannes Berg
61cbe2ffd8 nl80211: Use device AP SME capability
This changes the auto-detection of whether or not the device contains
the AP SME away from monitor interface addition failing to the explicit
attribute in nl80211. Keep the old auto-detection for a little while so
that ath6kl isn't broken right away.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-19 13:42:49 +02:00
Jithu Jance
57ebba598d nl80211: Implement shared_freq
This patch implements shared_freq handler for driver_nl80211.c. If a
"p2p_group_add" happens after legacy STA association, then this patch
will help to start the GO on the same frequency. This is useful when
supplicant is started on multiple interface running over a singly "PHY"
and the station interface is not used for the P2P device operations.

For example, wpa_supplicant -iwlan0 ..  -N -iwlan1 ... and wlan0 is used
for station connection and wlan1 as the P2P device interface.

Signed-hostap: Jithu Jance <jithu@broadcom.com>
2011-11-19 11:23:49 +02:00
Ben Greear
3b7ea88047 nl80211: Make MLME failure messages unique
Without this, it is impossible to tell exactly which
MLME code returned the error.

Also, convert to wpa_dbg so that we get device names
in the messages.

Signed-hostap: Ben Greear <greearb@candelatech.com>
2011-11-18 23:41:52 +02:00
Dan Williams
98ac6763ff nl80211: Fix UNSPEC signal quality reporting
r->level got assigned so it's clearly not INVALID; instead
r->qual should be invalid.

Signed-hostap: Dan Williams <dcbw@redhat.com>
2011-11-18 23:23:45 +02:00
Johannes Berg
335d42b1a6 nl80211: Get rid of family/cache objects
All we really need is the family ID, and we can
get that with genl_ctrl_resolve() and then don't
need to worry about family/cache objects.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2011-11-16 16:42:49 +02:00
Jouni Malinen
a5c696adb4 nl80211: Verify that global driver pointer is not NULL
driver_nl80211.c assumes that global driver pointer is set, so better
make this more consistent.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-11-13 22:39:57 +02:00
Gary Morain
577db0aedd Prefer 5 GHz networks over 2.4 GHz networks
In scan.c, merge a channel's noise value into the scan results. When
comparing scan results, compute the signal-to-noise ratio and use it
when available. Prefer a 5 GHz network if its SNR is really big (> 30)
or if its SNR is relatively close to the other network's.
2011-10-30 21:08:21 +02:00
Jouni Malinen
b3af99d202 nl80211: Disable IEEE 802.11b rates only for P2P iftypes
Instead of hardcoding IEEE 802.11b rates to be disabled whenever
P2P support is built in and supported by the driver, do this only
when an interface is set to P2P mode (both when adding a new
interface and when changing the interface mode). This re-enables
use of IEEE 802.11b APs with CONFIG_P2P=y builds.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-29 22:46:58 +03:00
Jouni Malinen
97bcd562eb Remove disable_11b_rates() driver_ops
This function was used unconditionally if wpa_supplicant build
includes CONFIG_P2P=y. Adding a separate driver_ops for such use
is not really useful since the driver wrappers can do the same
internally. Remove this driver_ops and move matching functionality
into driver_nl80211.c which was the only driver wrapper using
this driver_ops callback.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-29 22:25:28 +03:00
Jouni Malinen
1dea5882be nl80211: Fix re-enabling of 802.11b rates
nl80211_disable_11b_rates() function was supposed to use the 'disabled'
parameter to figure out whether to disable or re-enable 802.11b rates.
In addition, the driver deinit path was now ending up re-disabling the
enabled rates at the end of the deinit operations when the interface
type was forced back to station. Both of these issues are now fixed
and the 2.4 GHz band TX rate index is cleared properly when
wpa_supplicant is stopped.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-29 22:12:26 +03:00
Eliad Peller
083590503b nl80211: disable_11b_rates on interface mode change
disable_11b_rates() is called on interface addition,
but not on interface type change, resulting in 11b rates
enabled on p2p interfaces.

Signed-off-by: Eliad Peller <eliad@wizery.com>
2011-10-29 22:00:07 +03:00
Jouni Malinen
b106173a82 Add no_cck parameter for send_action() driver_ops
This can be used to apply the no-CCK rule conditionally depending on
which frame is being sent. The no-CCK rule applies only for P2P
management frames while SA Query and FT use cases do not have similar
restrictions.

Signed-hostap: Jouni Malinen <j@w1.fi>
2011-10-29 21:49:46 +03:00
Rajkumar Manoharan
970fa12ea2 nl80211: Add support to disable CCK rate for P2P frames
Add a new attribute to specify whether to use CCK rate or not during
scan and sending management frames. This helps to send P2P probes
at non-CCK rate. This ensures that P2P probe request/response/action
frames are always sent at non-CCK rates.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2011-10-29 21:23:27 +03:00
Jouni Malinen
59d249255c nl80211: Ignore netlink interface down if interface is up
The netlink event processing is delayed since they are only returned
after control returns to eloop. This can result in netlink down events
being processed at a point when the interface has is actually still
there (the first event on new interface is down) and that can result in
odd behavior especially when the resulting interface-disabled event is
delivered to AP mode interface with wpa_supplicant.

Work around this by filtering netlink down events if the matching
interface is up at the time the netlink event is processed. This fixes
an issue brought up by commit 36d84860bb.
2011-10-28 21:08:15 +03:00
Arik Nemtsov
45b722f150 TDLS: Add peer as a STA during link setup
Before commencing setup, add a new STA entry to the driver representing
the peer. Later during setup, update the STA entry using information
received from the peer.

Extend sta_add() callback for adding/modifying a TDLS peer entry and
connect it to the TDLS state machine. Implement this callback for the
nl80211 driver and send peer information to kernel.

Mark TDLS peer entries with a new flag and translate it to a
corresponding nl80211 flag in the nl80211 driver.

In addition, correct TDLS related documentation in the wpa_driver_ops
structure.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:19:35 +03:00
Arik Nemtsov
35287637cc TDLS/nl80211: Support receiving TDLS discovery response frames
Register for the TDLS discovery response public action frame in nl80211.
Print out a debug message when a Discovery Resp frame is received and
validated.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:18:35 +03:00
Arik Nemtsov
03ea178603 nl80211: Implement TDLS callback functions and propagate capabilities
Allow passing high-level TDLS commands and TDLS frames to kernel
via new nl80211 commands.

Propagate TDLS related nl80211 capability flags from kernel and add them
as driver capability flags.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
2011-10-23 22:15:05 +03:00
Jouni Malinen
8c66e18511 nl80211: Handle special TDLS direct link key index use
An ugly hack is currently used to indicate keys for TDLS direct link:
key_idx == -1. That needs to be converted to 0 for cfg80211 to accept
the key.
2011-10-23 22:14:05 +03:00
Jouni Malinen
e3b473eb4e Allow driver wrappers to indicate whether HT info is known
This is needed to be able to figure out whether the driver is known
not to support HT.
2011-10-23 17:21:39 +03:00
Jouni Malinen
bd2df8921b nl80211: Remove some unnecessary ifdef HOSTAPD blocks 2011-10-22 22:51:49 +03:00
Jouni Malinen
9e0e6902a2 Share a single wpa_scan_results_free() implementation
There is not really a very good location for this anywhere, but the
function is small enough to live as an inline function for now.
2011-10-22 22:09:40 +03:00
Ben Greear
c81eff1a61 nl80211: Use one global ioctl socket
Saves sockets when using multiple VIFS in a single
wpa_supplicant process.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2011-10-22 21:39:42 +03:00
Ben Greear
276e2d671c nl80211: Use a global netlink command object
Netlink sockets can be shared among all driver instances, saving
sockets and memory when using multiple interfaces in a single process.
2011-10-22 20:06:32 +03:00
Ben Greear
2a7b66f574 nl80211: Use global nl_cb template
All interfaces can share a single nl_cb template.
2011-10-22 20:06:30 +03:00
Ben Greear
dac12351d8 nl80211: Clean up error path in wpa_driver_nl80211_init
No need to duplicate the deinit code since wpa_driver_nl80211_deinit()
can be used here to clean up after a failure.
2011-10-22 18:28:06 +03:00
Johannes Berg
a92dfde818 nl80211: Abstract handle/cache (de)allocation
This is a cleanup now and makes it easier to add more sockets in the
future.
2011-10-22 16:56:43 +03:00
Johannes Berg
7635bfb071 nl80211: Fix hostapd error path
i802_init() tries to clean up everything manually, call
wpa_driver_nl80211_deinit() instead and also handle the
EAPOL socket properly.
2011-10-22 13:04:47 +03:00
Ben Greear
36d84860bb nl80211: Use global netlink rtm event object
Netlink sockets can be shared among all driver instances, saving lots
of sockets, spurious log messages, memory, and CPU usage when using
multiple interfaces in a single process.
2011-10-22 12:39:05 +03:00
Jouni Malinen
4b24282a17 hostapd: Call global_init/global_deinit driver_ops
Now both wpa_supplicant and hostapd allow the driver wrappers to use the
global context similarly.
2011-10-22 12:22:59 +03:00
Jouni Malinen
9fb0407055 nl80211: Use a wrapper for genlmsg_put
This reduces the code size by a kilobyte or so and makes it easier
to replace the netlink instances to be shared among interfaces.
2011-10-22 11:29:03 +03:00
Johannes Berg
e8b5e24e04 nl80211: Clean up capability querying
There's no need to store everything once and then copy it. Just fill the
capa struct directly in the function that parses the info from nl80211.
2011-10-20 21:57:32 +03:00
Johannes Berg
9b90955ec7 AP: Pass only bssid/addr/wds to EVENT_RX_FROM_UNKNOWN 2011-10-20 21:51:32 +03:00
Jouni Malinen
6e8183d714 nl80211: Stop more quickly on initialization errors
Stop on fatal errors like an attempt to use a non-existing interface or
not have root privileges to avoid producing confusing error messages.
2011-10-20 21:36:36 +03:00
Johannes Berg
40442f5b48 nl80211: Compat code for genl_ctrl_alloc_cache
It's really a waste of bits to duplicate the code for
genl_ctrl_alloc_cache() again and again -- just add a
wrapper like in iw.
2011-10-20 21:08:26 +03:00
Johannes Berg
bcf24348ed AP: Do station poll in driver wrapper
This offloads the station polling to driver wrappers, which may offload
it again to the driver. The hostap driver wrapper uses "real" data
frames while nl80211 uses null data frames.

Also add a specific event to indicate that a poll was successful for
future use with the nl80211 driver.
2011-10-20 21:03:08 +03:00
Jouni Malinen
31357268e5 Move AP BSS configuration parameters into set_ap()
Remove the separate driver_ops functions set_cts_protect(),
set_preamble(), set_short_slot_time(), and set_ht_params(). These
belong into same set of operations as set_ap(), so there is no need
to maintain separate functions that just make the driver wrapper
more complex.

Since these have only been used with driver_nl80211.c, the driver_ops
can be removed immediately instead of maintaining backwards
compatibility period with the old functions.
2011-10-17 19:31:33 +03:00
Jouni Malinen
fd13a54180 Deprecate set_intra_bss() driver_ops
The AP client isolation parameter is now available through set_ap().
driver_nl80211.c was the only driver wrapper using the set_intra_bss()
call in hostap.git, but some external trees may have used this. Once
those are cleared, the set_infra_bss() driver_ops can be removed
completely. The only remaining use case for it currently is in P2P
GO mode with wpa_supplicant.
2011-10-17 18:58:46 +03:00
Jouni Malinen
71269b3708 WNM: Add BSS Transition Management Request for ESS Disassoc Imminent
"hostapd_cli ess_disassoc (STA addr) (URL)" can now be used to send
an ESS Dissassociation Imminent notification to the STA. This event
is shown in wpa_supplicant ctrl_iface monitors (e.g., wpa_cli):
"WNM: ESS Disassociation Imminent - session_info_url=http://example.com/session/"
2011-10-16 23:55:34 +03:00
Jouni Malinen
4fe9fa0d29 nl80211: Register GAS frames for Interworking
The GAS frames are used both with P2P and Interworking, so register
them if CONFIG_INTERWORKING is used without CONFIG_P2P.
2011-10-16 23:55:34 +03:00
Luciano Coelho
bd525934e5 nl80211: Add support for sched_scan filtering
Use the SSID filter list passed in the scheduled scan request down to
the kernel driver, so it can use the list to return only the wanted
SSIDs. Some kernel drivers can use this information to offload the
SSID filter to the hardware, helping with reducing the power
consumption.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-15 18:53:14 +03:00
Luciano Coelho
d21c63b925 nl80211: Add scheduled scan support
This commit adds scheduled scan support in the nl80211 driver.

Signed-off-by: Luciano Coelho <coelho@ti.com>
2011-10-15 18:53:13 +03:00
Jouni Malinen
44dc872ee5 nl80211: Add debug print for channel changes 2011-10-15 13:29:56 +03:00
Jithu Jance
6758b1677a nl80211: Use shorter monitor interface name for P2P GO
Currently the P2P Interface name[p2p-%s-%d] is reset when the P2P
Interface name reaches the "IFNAMSIZ" limit. Monitor interface name is
derived from p2p interface name with the addition of few characters
[mon.p2p-%s-%d] and hence Monitor interface name hits IFNAMSIZ limit
before P2P Interface name. Rename the monitor interface name to
mon-%s-%d to reduce the length to same with p2p-%s-%d.
2011-10-15 13:07:30 +03:00
Vivek Natarajan
004ba773ce nl80211: Add driver flag for firmware-based BSS selection
This new flag can be used to change wpa_supplicant behavior in the
default ap_scan=1 mode to move BSS selection into the driver (likely
firmware). This commit is only adding the flag; separate commits
will be used to change the actual connection/roaming behavior.
2011-09-26 14:26:55 +03:00
Pavel Roskin
ffbf1eaa26 Fix typos found by codespell
Signed-off-by: Pavel Roskin <proski@gnu.org>
2011-09-22 00:43:59 +03:00
Jouni Malinen
c36d52427a nl80211: Support PMKSA candidate events
This adds support for RSN pre-authentication with nl80211 interface and
drivers that handle roaming internally (i.e., wpa_supplicant is not
responsible for requesting scan results that provide the needed
information without these events).
2011-09-21 16:14:41 +03:00
Jouni Malinen
20f5a4c24c nl80211: Work around EALREADY from connect command
cfg80211 does not currently allow NL80211_CMD_CONNECT when there
is already an association. This can result in wpa_supplicant being
unable to request a connection if the interface is already in
connected state. Work around this by requesting disconnection if
the connect command fails with EALREADY error. This allows
wpa_supplicant to recover from the unexpected state and complete
the connect request on next attempt.
2011-09-18 21:26:55 +03:00
Johannes Berg
531f0331a1 nl80211: Cancel not yet started r-o-c
Currently, the following can happen:

1) P2P state machine requests R-O-C
2) user changes their mind and aborts
3) P2P state machine aborts R-O-C
4) driver_nl80211 rejects abort since there
   was no notification about the start yet
5) R-O-C period start notification from kernel
6) P2P state machine requests new R-O-C
7) this overlaps with old R-O-C -- iwlwifi driver
   can't handle that and returns -EBUSY
8) state machine stops dead in its tracks

The reason is that the abort isn't going through properly. Instead of
tracking whether a R-O-C is active in driver_nl80211, track whether one
was requested to avoid this scenario.

Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-09-10 22:57:41 +03:00
Rajkumar Manoharan
47185fc788 P2P: Remove CCK supported rates when running P2P scan
This allows drivers to disable CCK rates from Probe Request frames.
For nl80211, this is currently applying only to the supported rates
element(s), but this mechanism could be extended to address TX rate
control masking, too, to lessen need for global rate disabling.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
2011-09-10 22:40:30 +03:00
Johannes Berg
7626850dd6 nl80211: Automatically use concurrent P2P if possible
Since the kernel can now advertise P2P concurrent support by advertising
interface combinations, we can take advantage of that and automatically
use P2P_CONCURRENT / P2P_MGMT_AND_NON_P2P for drivers that advertise
support.

Keep driver_param=use_p2p_group_interface=1 for anyone not advertising
interface combinations in their drivers yet.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2011-09-10 21:52:21 +03:00
Jouni Malinen
64fa840a97 nl80211: Fix WPA_VERSIONS attribute for Connect command
The previous code was trying to figure out which WPA version is
used based on the extra IEs requested for Association Request. That
did not work properly in cases where non-WPA networks are used with
some extra IEs. Fix this by using more robust mechanism for passing
the WPA versions from core wpa_supplicant to the driver_ops
associate().
2011-09-02 20:40:23 +03:00
Jouni Malinen
86957e6298 nl80211: Support AP mode probe/action frame TX/RX without monitor iface
This allows non-mac80211 drivers to report received Probe Request
frames to user space and Probe Response and Action frames to be sent
from user space when using AP/P2P GO mode.
2011-08-29 14:26:55 +03:00
Jouni Malinen
4dc03726de Delay STA entry removal until Deauth/Disassoc TX status in AP mode
This allows the driver to use PS buffering of Deauthentication and
Disassociation frames when the STA is in power save sleep. The STA
entry (and PTK) will be removed from the kernel only after the
Deauth/Disassoc has been transmitted (e.g., when the STA wakes up).
A hardcoded two second timeout is used to limit the length of this
window should the driver fail to deliver the frame (e.g., the STA
is out of range and does not wake up). The kernel STA entry is
marked unauthorized during the wait to avoid accepting Data
frames from the STA that we have decided to disconnect.

This behavior is available only with drivers that provide TX status
events for Deauth/Disassoc frames (nl80211 at this point). Other
drivers continue to use the previous behavior where the STA entry
is removed immediately.
2011-08-28 23:07:02 +03:00
Jouni Malinen
fb91db5639 Provide extra IEs for AP mode management frames with set_ap
Drivers that build Beacon, Probe Response, and (Re)Association
Response frames can use this information to and WPS and P2P IE
when needed.
2011-08-26 21:14:25 +03:00
Jouni Malinen
97a7a0b504 Add support for setting SSID hiding mode through set_ap() 2011-08-26 21:12:47 +03:00
Jouni Malinen
b11d1d6439 Add crypto parameters to set_ap() command separately
This helps drivers that build the Beacon and Probe Response frames
internally.
2011-08-26 21:11:42 +03:00
Jouni Malinen
ccb941e6da Add SSID as a separate item in AP mode Beacon setup
This makes it easier for drivers that need the SSID to get it from the
Beacon setup operation without having to parse the Beacon IEs.
2011-08-10 13:29:32 +03:00
Jouni Malinen
19c3b56685 Replace set_beacon() driver op with set_ap()
This change is a first step in better supporting different driver
architectures for AP mode operations with nl80211. This commit in
itself does not add new functionality, but it makes it easier to add
new AP mode parameters to address needs of drivers that have more of
the MLME/SME in firmware or kernel.
2011-08-10 13:22:37 +03:00
Jouni Malinen
5fb1a23252 nl80211: Fix hostapd build 2011-08-09 23:32:26 +03:00