Commit graph

37 commits

Author SHA1 Message Date
Jouni Malinen
669b5324e1 RADIUS: Update full message for interim accounting updates
Instead of using the RADIUS client retransmission design with the old
RADIUS message contents for each retry, trigger a completely new interim
accounting update instance more quickly (using the same schedule as
RADIUS message retransmissions) to improve accounting updates in cases
where RADIUS message delivery fails. This allows the server to get up to
date information from the time the "retry" message was sent instead of
the old information from the time the first failed attempt was sent.

Signed-off-by: Jouni Malinen <j@w1.fi>
2016-02-29 11:52:16 +02:00
Jouni Malinen
a67e7e533a RADIUS: Add EACCES to list of recognized send() errno values
This allows RADIUS failover to be performed if send() return EACCES
error which is what happens after a recent Linux kernel commit
0315e382704817b279e5693dca8ab9d89aa20b3f ('net: Fix behaviour of
unreachable, blackhole and prohibit') for a local sender when route type
is prohibit.

This fixes the hwsim test case radius_failover when running against a
kernel build that includes that commit.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-12-24 12:43:05 +02:00
Helmut Schaa
e5d34da25a hostapd: Force RADIUS socket renewal on RADIUS auth failures
On RADIUS auth/acct failures hostapd will try a new server if one is
available. Reuse the failover logic to force a socket renewal if only
one RADIUS server is configured.

This fixes problems when a route for the RADIUS server gets added after
the socket was "connected". The RADIUS socket is still sending the
RADIUS requests out using the previous route.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2015-10-06 01:27:29 +03:00
Jouni Malinen
b4a9292cfb RADIUS client: Fix server failover on return-to-primary on error case
If a connection with the primary server cannot be established, restore
connection to the previously used server.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:52 +02:00
Jouni Malinen
1a7ed38670 RADIUS client: Fix a copy-paste error in accounting server failover
Commit 347c55e216 ('RADIUS client: Re-try
connection if socket is closed on retransmit') added a new option for
initialing RADIUS server failover from radius_client_retransmit(), but
ended up trying to change authentication servers when accounting server
was supposed to be changed due to a copy-paste issue.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-03-01 22:36:52 +02:00
Jouni Malinen
70fd8287eb RADIUS client: Fix previous failover change
Commit 347c55e216 ('RADIUS client: Re-try
connection if socket is closed on retransmit') added a possibility of
executing RADIUS server failover change within
radius_client_retransmit() without taking into account that this
operation may end up freeing the pending message that is being
processed. This could result in use of freed memory. Avoid this by
checking whether any pending messages have been removed and if so, do
not try to retransmit the potentially freed message.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-28 20:52:08 +02:00
Jouni Malinen
347c55e216 RADIUS client: Re-try connection if socket is closed on retransmit
Previously, send() was called with invalid fd = -1 in some error cases
for retransmission and this could even result in a loop of multiple such
attempts. This is obviously not going to work, so drop such attempts and
instead, try to reconnect a socket to the server if the current socket
is not valid.

In addition, initiate server failover immediately if the current socket
is not valid instead of waiting for a timeout.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-28 16:40:58 +02:00
Jouni Malinen
94b39e5927 RADIUS client: Fix server connection recovery after initial failure
If the initial attempt at opening the socket connection to the RADIUS
server failed due to missing IP connectivity during startup, e.g., with
"connect[radius]: Network is unreachable", hostapd did not try to
reconnect when RADIUS messages were sent. Instead, it only reported "No
authentication server configured" even if the configuration did have a
server entry.

This was broken by commit 9ed4076673
('RADIUS client: Do not try to send message without socket') for the
initial case and the more recent fixes in RADIUS server failover cases
did not cover the initial failure case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-02-28 15:45:17 +02:00
Jouni Malinen
0d787f0242 Fix RADIUS client with out-of-memory and missing shared secret
It was possible for an out-of-memory code path to trigger NULL pointer
dereference when preparing a RADIUS accounting report.

Signed-off-by: Jouni Malinen <j@w1.fi>
2015-01-19 02:35:43 +02:00
Jouni Malinen
b81e274cdf RADIUS client: Print a clear debug log entry if socket is not available
It could have been possible to select a socket that is not open
(sel_sock == -1) and try to use that in socket operations. This would
fail with potentially confusing error messages. Make this clearer by
printing a clear debug log entry on socket not being available.
(CID 72696)

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-11-23 17:41:13 +02:00
Jouni Malinen
3a413e0ed8 RADIUS client: Check getsockname() return value
In theory, this function could fail, so check the return value before
printing out the RADIUS local address debug message (CID 72700).

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-09-07 18:35:46 +03:00
Jouni Malinen
b523973611 RADIUS client: Trigger failover more quickly if socket is not valid
It is possible for the connect() call to fail (e.g., due to unreachable
network based on local routing table), so the current auth/acct_sock may
be left to -1. Use that as an addition trigger to allow server failover
operation to be performed more quickly if it is known that the
retransmission attempt will not succeed anyway.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-30 20:52:08 +03:00
Jouni Malinen
09844c0984 RADIUS client: Do not flush pending messages if server did not change
The re-open socket to the current RADIUS server code path did not work
in the expected way here. The pending authentication messages do not
need to be flushed in that case and neither should the retransmission
parameters be cleared. Fix this by performing these operations only if
the server did actually change as a part of a failover operation.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-30 20:46:20 +03:00
Jouni Malinen
70d4084885 RADIUS client: Fix socket close/re-open on server change
Both IPv4 and IPv6 sockets were not closed consistently in the paths
that tried to change RADIUS servers. This could result in leaking
sockets and leaving behind registered eloop events to freed memory on
interface removal.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-30 18:09:42 +03:00
Jerry Yang
d045cc8e4c RADIUS client: Fix crash issue in radius_client_timer()
While iterating through RADIUS messages in radius_client_timer(), one
message entry may get flushed by "radius_client_retransmit -->
radius_client_handle_send_error --> radius_client_init_auth -->
radius_change_server --> radius_client_flush". This could result in
freed memory being accessed afterwards.

Signed-off-by: Jerry Yang <xyang@sonicwall.com>
2014-05-30 18:08:59 +03:00
Jouni Malinen
c1fb75a6e2 RADIUS client: Handle ENETUNREACH similarly to other failure cases
This is one more possible send() error that should trigger RADIUS server
change if multiple servers are configured.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-30 18:08:54 +03:00
Jouni Malinen
9ed4076673 RADIUS client: Do not try to send message without socket
It is possible for the RADIUS authentication/accounting socket to not be
open even if partial RADIUS server configuration has been done through
the control interface SET commands. Previously, this resulted in send()
attempt using fd=-1 which fails with bad file descriptor. Clean this up
by logging this as a missing configuration instead of trying to send the
message when that is known to fail.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-05-30 18:08:37 +03:00
Johannes Berg
40128043ca RADIUS client: Use monotonic time
Since the RADIUS client cares about relative time (retry timeout)
only, it should use monotonic time.

Signed-hostap: Johannes Berg <johannes.berg@intel.com>
2013-12-24 07:30:45 +02:00
Jouni Malinen
61323e70e1 Convert perror/printf calls to wpa_printf
This makes debug and error logging more consistent and allows them to be
directed to a file more easily.

Signed-hostap: Jouni Malinen <j@w1.fi>
2013-11-02 12:58:33 +02:00
Jouni Malinen
067ffa2696 Convert os_realloc() for an array to use os_realloc_array()
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-08-13 21:21:23 +03:00
Jouni Malinen
8c6f80e023 Remove extra linefeed from hostapd_logger message
Signed-hostap: Jouni Malinen <j@w1.fi>
2012-04-01 13:41:03 +03:00
Alexander Couzens
a4e73a0e47 Fix potential double free and use of freed memory in RADIUS client
ieee802_1x_encapsulate_radius() frees the RADIUS message if
radius_client_send() returns error. This could have resulted in use of
freed memory and double freeing of the RADIUS message if send() fails
since the message is also left in the retransmit list. Avoid this by not
returning error to the caller in such a case.

Signed-off-by: Alexander Couzens <lynxis@c-base.org>
2012-04-01 13:36:52 +03:00
Jouni Malinen
0f3d578efc Remove the GPL notification from files contributed by Jouni Malinen
Remove the GPL notification text from the files that were
initially contributed by myself.

Signed-hostap: Jouni Malinen <j@w1.fi>
2012-02-11 19:39:36 +02:00
Jouni Malinen
e3e52e364e hostapd: Fix RADIUS client configuration update on reconfig
The internal pointer to RADIUS client configuration needs to be
updated whenever a new hostapd configuration is loaded. Without
this, freed memory may be dereferenced and this can result in
segmentation faults.
2011-02-10 22:12:29 +02:00
Jouni Malinen
2988796257 Fix RADIUS client to cancel IPv6 socket read notifications 2009-12-19 18:52:42 +02:00
Jouni Malinen
1489e11a94 Make struct radius_msg private to radius.c
This is internal data structure for RADIUS message handling and
external code should not touch it directly.
2009-12-19 17:26:57 +02:00
Jouni Malinen
aa235d2ef7 Convert RADIUS message code to use wpabuf internally 2009-12-19 17:12:07 +02:00
Jouni Malinen
9e7245bdb4 Change radius_msg_free() to free the buffer
Since all callers were freeing the buffer immediately anyway, move
this operation into radius_msg_free() to reduce code size.
2009-12-19 16:34:41 +02:00
Jouni Malinen
15ef92d3cc Complete Doxygen documentation for RADIUS client
No more warnings from Doxygen about missing documentation from
radius_client.[ch].
2009-11-29 11:48:28 +02:00
Jouni Malinen
93704f8f95 Remove unused RADIUS client reconfig function
This is not actually used at all and it looks like the rules for
maintaining the old/new RADIUS configuration are not very clear in the
case the RADIUS client configuration did not change. Consequently, it
is better to just remove this for now and if similar functionality is
ever needed, redesign it to be easier to use without causing hard to
find issues with using freed memory.

Simpler approach to reconfiguring the RADIUS client would involve
just deinitializing the old context unconditionally and initializing
a new one whenever the configuration could have changed.
2009-11-28 23:04:35 +02:00
Jouni Malinen
df1e24aceb Improved Doxygen documentation for RADIUS client code 2009-11-28 23:00:29 +02:00
Stefan Winter
a2fbf12524 Disable PMTU discovery for RADIUS packets (sent them without DF)
When Linux has Path MTU discovery enabled, it sets by default the DF bit
on all outgoing datagrams, also UDP ones. If a RADIUS message is bigger
than the smallest MTU size to the target, it will be discarded.

This effectively limits RADIUS messages to ~ 1500 Bytes, while they can
be up to 4k according to RFC2865. In practice, this can mean trouble
when doing EAP-TLS with many RADIUS attributes besides the EAP-Message.
[Bug 326]
2009-08-23 21:21:25 +03:00
Jouni Malinen
7d02e64157 Mark shared secret const in RADIUS client routines 2009-01-08 16:41:47 +02:00
Jouni Malinen
7e5ba1b916 Mark functions static if not used elsewhere and use proper prototypes 2009-01-03 20:38:42 +02:00
Jouni Malinen
815c5e1435 Fixed RADIUS client local address forcing for IPv6 (eapol_test)
Need to use the IPv6 address data in bind() call if IPv6 is selected.
2008-06-05 20:33:33 +03:00
Tomasz Wolniewicz
c454f57379 eapol_test: Allow client IP address to be specified
Allow the user to set the IP address of the eapol_test client. This if
very useful when you have a machine with many interfaces and want to use a
particular one for testing RADIUS connectivity. For instance when I run the
national eduroam proxy I can only connect to other server from a particular
address, an our machine happens to have several IPs. So if I want to run
connectivity tests, I must make sure that my test uses a particular
interface. The -A option allows one to set this).

(jm: cleaned up to use radius configuration structure instead of global
variable for the address and added IPv6 support)
2008-03-30 18:15:52 +03:00
Jouni Malinen
6fc6879bd5 Re-initialize hostapd/wpa_supplicant git repository based on 0.6.3 release 2008-02-27 17:34:43 -08:00