Commit graph

11823 commits

Author SHA1 Message Date
Jouni Malinen
c5e1522f9a Added notes about WPS UPnP support and external Registrars 2009-01-29 19:19:30 +02:00
Jouni Malinen
f620268f13 WPS: Add support for external Registrars using UPnP transport
This adds mostly feature complete external Registrar support with the
main missing part being proper support for multiple external Registrars
working at the same time and processing of concurrent registrations when
using an external Registrar.

This code is based on Sony/Saice implementation
(https://www.saice-wpsnfc.bz/) and the changes made by Ted Merrill
(Atheros) to make it more suitable for hostapd design and embedded
systems. Some of the UPnP code is based on Intel's libupnp. Copyrights
and licensing are explained in src/wps/wps_upnp.c in more detail.
2009-01-29 18:47:02 +02:00
Jouni Malinen
39034ce80f Fixed WPS Authenticator attribute processing after M2D
We must not replace M1 with M2D as the last_msg since we need M1 to
validate a possible M2 after M2D. Since M2D and ACK/NACK replies do not
include Authenticator attribute, we can just ignore M2D as far as
updating last_msg is concerned.
2009-01-28 11:59:29 +02:00
Jouni Malinen
1e14526571 Use Data::Data only with Host AP driver; mac80211 can use Data::Nullfunc
The inactivity poll was originally supposed to use Data::Nullfunc, but
due to Prism2/2.5/3 firmware issues, this was changed to an empty
Data::Data frame. mac80211 does not have such an issue, so change the
inactivity poll frame to be Data::Nullfunc by default and use the
Data::Data workaround only with Host AP driver.
2009-01-27 16:36:27 +02:00
Jouni Malinen
f01a6b1e3e driver_nl80211: Fixed inactivity poll status processing
Previous version was discarding TX status for FromDS data frames, but
those are the exact ones that we need to check for inactivity poll to
work, i.e., they are TX status reports for injected data frames.

In addition, remove the debug printing of TX status for data frame since
that could fill up the debug output if kernel-side filtering cannot be
used with monitor interface.
2009-01-27 16:34:48 +02:00
Johannes Berg
9616af520b driver_nl80211: use Linux socket filter to improve performance
TX status information for all transmitted data frames is not going to
be sent to hostapd anymore, so the CPU load with high traffic load is
going to be significantly reduced.
2009-01-27 12:28:05 +02:00
Jouni Malinen
7ce3304ab3 Do not forget wpa_passphrase so that WPS can use it
Send ASCII passphrase instead of derived PSK if the configuration uses
the passphrase.
2009-01-24 12:51:28 +02:00
Jouni Malinen
1a5a04c3de WPS: Add a workaround for incorrect passphrase encoding in Network Key
External Registrar in Vista may include NULL termination in the Network
Key when encoding an ASCII passphrase for WPA/WPA2-PSK. As a workaround,
remove this extra octet if present.
2009-01-24 12:50:00 +02:00
Jouni Malinen
3b2cf800af WPS: Lock AP Setup on multiple AP PIN validation failures
If a Registrar tries to configure the AP, but fails to validate the
device password (AP PIN), lock the AP setup after four failures. This
protects the AP PIN against brute force guessing attacks.
2009-01-23 21:57:43 +02:00
Jouni Malinen
4c29cae932 Added ap_settings option for overriding WPS AP Settings in M7
This optional configuration parameter can be used to override AP
Settings attributes in M7 similarly to extra_cred option for Credential
attribute(s) in M8.
2009-01-23 21:08:55 +02:00
Jouni Malinen
6296625308 Free extra_cred when freeing configuration 2009-01-23 20:51:26 +02:00
Jouni Malinen
b385188de3 Add an EAPOL payload length workaround for a WPS implementation
Buffalo WHR-G125 Ver.1.47 seems to send EAP-WPS packets with too short
EAPOL header length field (14 octets regardless of EAP frame length).
This is fixed in firmware Ver.1.49, but the broken version is included
in many deployed APs. As a workaround, fix the EAPOL header based on the
correct length in the EAP packet. This workaround can be disabled with
eap_workaround=0 option in the network configuration.
2009-01-23 18:01:03 +02:00
Jouni Malinen
a609915233 Allow WPS APs for PIN enrollment even without Selected Registrar
Some WPS APs do not set Selected Registrar attribute to 1 properly when
using an external Registrar. Allow such an AP to be selected for PIN
registration after couple of scan runs that do not find APs marked with
Selected Registrar = 1. This allows wpa_supplicant to iterate through
all APs that advertise WPS support without delaying connection with
implementations that set Selected Registrar = 1 properly.
2009-01-23 13:10:58 +02:00
Jouni Malinen
401e039633 Allow WPS device strings to be unconfigured
Previous version was causing a NULL pointer dereference if a required
string was not set in configuration. It is better to make these
optional.
2009-01-22 21:26:14 +02:00
Jouni Malinen
b3ddab2122 WPS: Pad DH Public Key and Shared Key to 192 octets
WPS spec is not very specific on the presentation used for the DH
values. The Public Key attribute is described to be 192 octets long, so
that could be interpreted to imply that other places use fixed length
presentation for the DH keys. Change the DH derivation to use fixed
length bufferd by zero padding them from beginning if needed. This can
resolve infrequent (about 1/256 chance for both Public Key and Shared
Key being shorter) interop issues.
2009-01-22 19:32:58 +02:00
Masashi Honma
96fa129da9 Use WPS state Not Configured instead of Configured in Enrollee
This is needed to allow external Registrar (at least the implementation
in Windows Vista) to configure the Enrollee.

With this patch and my previous patch (for wps.c) , I could pass "Wi-Fi
WPS Test Plan Version 1.0 [5.1.4. Add to AP using PIN Config method and
PASS PHRASE through wired external registrar]".
2009-01-22 15:18:03 +02:00
Masashi Honma
e29bcf9eab WPS: Check Device Password ID attribute only if present in AP search
I can't pass the "Wi-Fi WPS Test Plan Version 1.0 [5.1.4. Add to AP
using PIN Config method and PASS PHRASE through wired external
registrar]". The wpa_supplicant-0.6.7 can't recoginize the testbed
AP(BCM94704AGRRev-E.2.4) as WPS PIN AP. Because after PIN entered, the
AP sends Selected Registrar attribute=0 and not send Device Password ID
attribute.

The proposed change as-is removed validation of Selected Registrar
attribute completely. However, that part is not included in this commit
since it can cause problems for environments with multiple WPS-enabled
APs. Another workaround for this will be considered in wpa_supplicant
scanning process (e.g., start trying to use WPS with APs that do not set
Selected Registrar to TRUE after couple of scan runs that do not find
any APs with Selected Registrar TRUE).
2009-01-22 15:12:18 +02:00
Jouni Malinen
695e2b48e2 Documented interface for external WPS credential processing 2009-01-21 16:42:11 +02:00
Jouni Malinen
a60e7213e1 Fixed WPS with open and shared WEP networks
Do not initialize EAPOL state machine for the STA when hostapd is
configured to use WPS with open or shared WEP networks. This allows the
STA to use EAPOL-Start to indicate it wants to start WPS in such a case
and hostapd does not end up running through EAPOL authentication timeout
and disconnecting the STA if WPS is not used.

There was already code for starting EAPOL state machines based on
received EAPOL packets, but that was not working properly since
portEnabled was not set to TRUE on that code path. This is now fixed,
too.
2009-01-21 14:18:14 +02:00
Jouni Malinen
aabe26a136 WPS: Added option to disable AP auto-config on first registration
This operation can now be moved into an external program by configuring
hostapd with wps_cred_processing=1 and skip_cred_build=1. A new
ctrl_iface message (WPS-REG-SUCCESS <Enrollee MAC addr> <UUID-E>) will
be used to notify external programs of each successful registration and
that can be used as a tricker to move from unconfigured to configured
state.
2009-01-21 13:48:10 +02:00
Jouni Malinen
d745c7cc1a Added wps_cred_processing configuration option for hostapd
This behaves like the one in wpa_supplicant, i.e., hostapd can be
configured not to process new credentials (AP settings) internally and
instead pass the WPS attributes for an external program to process over
ctrl_iface.
2009-01-21 11:54:12 +02:00
Jouni Malinen
42d16805c9 Enable wpa_msg() for hostapd
Use wpa_msg() like wpa_supplicant in order to avoid having to use direct
hostapd_ctrl_iface_send() calls.
2009-01-21 11:45:56 +02:00
Jouni Malinen
05bf32cc87 Changed Credential MAC Address to be BSSID in AP/Registrar
WPS spec is not very clear on which MAC address is used here, but BSSID
makes more sense than Enrollee MAC address.
2009-01-20 21:28:31 +02:00
Jouni Malinen
790ccdb2b3 Changed the version to 0.7.0 since development branch is now 0.7.x 2009-01-20 21:16:29 +02:00
Jouni Malinen
1cc84c1c6b Increased wpa_cli/hostapd_cli ping interval and made it configurable
The default interval is now 5 seconds (used to be 1 second for
interactive mode and 2 seconds for wpa_cli -a). The interval can be
changed with -G<seconds> command line option.
2009-01-20 21:12:00 +02:00
Jouni Malinen
3a4606585c Implement set_probe_req_ie() for nl80211 drivers 2009-01-20 14:06:02 +02:00
Jouni Malinen
b0e8a05a1e Sync nl80211_copy.h with wireless-testing.git linux/nl80211.h 2009-01-20 13:56:58 +02:00
Jouni Malinen
adddffd129 Fixed MFP Association Comeback mechanism to use Timeout Interval IE
The separate Association Comeback Time IE was removed from IEEE 802.11w
and the Timeout Interval IE (from IEEE 802.11r) is used instead. The
editing on this is still somewhat incomplete in IEEE 802.11w/D7.0, but
still, the use of Timeout Interval IE is the expected mechanism.
2009-01-19 18:42:10 +02:00
Jouni Malinen
476621644c WPS: Add configurable option for processing credentials externally
The wps_cred_process option can be used to configure wpa_supplicant to
send received Credential attributes for external processing over
ctrl_iface and dbus. This allows external programs to update their
configuration when WPS is used to provision new networks.
2009-01-18 12:27:12 +02:00
Jouni Malinen
eca6e0a9a5 WPS: Provide the unparsed Credential attribute to cred_cb()
This makes it easier to pass the credential data to external programs
(e.g., Network Manager) for processing. The actual use of this data is
not yet included in hostapd/wpa_supplicant.
2009-01-17 22:17:12 +02:00
Jouni Malinen
f286077de2 WPS: Ignore credentials for unsupported authentication type
The current implementation does not support WPA/WPA2-Enterprise
credentials. Ignore any credential that is using unsupported
authentication type to avoid potential issues with partially configured
network blocks.
2009-01-17 21:45:51 +02:00
Jouni Malinen
7aab82b3fe Fixed WPS credential conversion to wpa_supplicant configuration
Must not set pairwise_cipher/group_cipher for non-WPA/WPA2 networks
since the configuration parser is going to reject such values. In
addition, should not limit group_cipher to just TKIP or TKIP|CCMP just
in case the AP is using WEP as the group cipher. Default group_cipher
value can be used for all cases.
2009-01-17 21:37:15 +02:00
Jouni Malinen
655e466600 Changed the Network Index value to 1 since that is the default value 2009-01-17 21:14:13 +02:00
Jouni Malinen
98f14041d0 IBSS RSN: Added key configuration 2009-01-17 18:14:41 +02:00
Jouni Malinen
0f057fb2c7 Added a separate ctx pointer for wpa_msg() calls in WPA supp
This is needed to allow IBSS RSN to use per-peer context while
maintaining support for wpa_msg() calls to get *wpa_s as the pointer.
2009-01-17 17:54:40 +02:00
Jouni Malinen
b9a2e577b4 IBSS RSN: Set the PSK based on network configuration 2009-01-17 17:47:25 +02:00
Jouni Malinen
4691fc7bc8 IBSS RSN: Set more hardcoded RSN IEs for now
This allows 4-way handshakes to be completed successfully.
2009-01-17 17:39:57 +02:00
Jouni Malinen
3146b2b961 IBSS RSN: Added couple of required WPA supplicant callback functions 2009-01-17 17:31:21 +02:00
Jouni Malinen
8be1844071 Process received EAPOL frames in IBSS RSN code if in IBSS mode 2009-01-17 17:25:11 +02:00
Jouni Malinen
0d1286e411 Added support for IBSS scanning into driver_test 2009-01-17 16:44:05 +02:00
Jouni Malinen
53895c3b60 Disable per-BSSID authentication for RSN IBSS
RSN IBSS uses authentication per-STA and that is initialized separately,
so there is no need to enable the per-BSS like authentication that is
used with APs.
2009-01-17 16:41:47 +02:00
Jouni Malinen
a5da9c64c9 Save and restore wpa_gui state when session manager restarts the app
This makes wpa_gui remember whether it was only in the tray when the
session was terminated and starts only in the tray if session manager
restarts it automatically.
2009-01-17 13:45:05 +02:00
Jouni Malinen
6fa68a0ee5 Added an option to add (or override) Credential attribute(s) in M8 2009-01-16 22:50:41 +02:00
Jouni Malinen
da3c6a5e2b Fixed auth_send_eapol() to use correct ctx structure 2009-01-16 01:18:11 +02:00
Jouni Malinen
d0fc6e1211 Use a hardcoded RSN IE for testing to start Authenticator
This needs to be replaced with proper RSN IE from the peer STA (e.g.,
from Probe Response).
2009-01-16 01:11:50 +02:00
Jouni Malinen
e2d492dd08 Implement EAPOL sending callbacks for IBSS RSN 2009-01-16 00:56:31 +02:00
Jouni Malinen
11ef8d3578 Added initial step for IBSS RSN support
This commit adds a new build option, CONFIG_IBSS_RSN=y, that can be used
to enable RSN support for IBSS. This links in RSN Authenticator code
from hostapd and adds code for managing per-peer information for IBSS. A
new wpa_cli command or driver event can be used to request RSN
authentication with an IBSS peer. New RSN Authenticator and Supplicant
will be allocated for each peer.

The basic state machine setup code is included in this commit, but the
state machines are not properly started yet. In addition, some of the
callback functions are not yet complete.
2009-01-15 01:21:55 +02:00
Jouni Malinen
4bb081f1b4 Renamed PMKSA cache functions to avoid duplicate symbols with supplicant
This allows hostapd/pmksa_cache.c and src/rsn_supp/pmksa_cache.c to be
linked into the same program.
2009-01-14 22:01:26 +02:00
Jouni Malinen
13268290b6 Moved rsn_pmkid() into shared code to avoid duplication 2009-01-14 21:31:47 +02:00
Jouni Malinen
676ea3413d eapol_test: Allow generated RADIUS attributes to be replaced
Do not add the automatically generated RADIUS attributes NAS-IP-Address,
Calling-Station-Id, Framed-MTU, NAS-Port-Type, and Connect-Info if -N
option is used with the same attribute type. This allows these
attributes to be replaced without causing duplicate entries.
2009-01-13 21:33:09 +02:00