Commit graph

16120 commits

Author SHA1 Message Date
Jouni Malinen
bc95d58330 Fix a typo in function documentation
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-27 12:43:28 +02:00
Jouni Malinen
b7275a8142 Update STA flags to the driver immediately on disconnection
hostapd (and wpa_supplicant in AP mode) was internally updating the STA
flags on disconnection cases to remove authorization and association.
However, some cases did not result in immediate update of the driver STA
entry. Update all such cases to send out the update to the driver as
well to reduce risk of race conditions where new frames might be
accepted for TX or RX after the port authorization or association has
been lost and configured keys are removed.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 17:51:03 +02:00
Jouni Malinen
b766ac488f tests: Use frame injection in monitor_iface_unknown_sta
The previously used normal data TX depends on undefined driver behavior
after all keys have been removed. That may not be available, so do this
more properly with frame injection through a monitor interface.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 17:51:03 +02:00
Jouni Malinen
19e8536d47 tests: sigma_dut controlled AP and transition disabled indication
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 13:01:19 +02:00
Jouni Malinen
f3de8f35bc tests: sigma_dut controlled AP and beacon protection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 12:50:00 +02:00
Jouni Malinen
14ee49c24b tests: sigma_dut controlled STA and beacon protection
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 11:52:47 +02:00
Jouni Malinen
431e5d5819 tests: Add forgotten step to ap_wpa3_eap_transition_disable
This was supposed to be included, but was forgotten in an editor window
with pending changes..

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 00:57:40 +02:00
Alexander Wetzel
8ca6f924d6 STA: Fix wpa_clear_keys() PTK key deletion logic
We have to delete PTK keys when either BIT(0) or BIT(15) are zero and
not only when both are zero.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-03-26 00:33:17 +02:00
Alexander Wetzel
ff54340905 AP: Fix Extended Key ID parameter check
Check the new variable to be set instead the current setting.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-03-26 00:26:17 +02:00
Jouni Malinen
5cf5680e5c tests: Transition disable
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 00:22:57 +02:00
Jouni Malinen
96686e637c wpa_supplicant AP mode configuration for Transition Disable KDE
Allow AP mode network profile in wpa_supplicant to be configured to
advertise Transition Disable DKE.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 00:18:06 +02:00
Jouni Malinen
9d1857cf35 Process Transition Disable KDE in station mode
Check whether the Transition Disable KDE is received from an
authenticated AP and if so, whether it contains valid indication for
disabling a transition mode. If that is the case, update the local
network profile by removing the less secure options.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 00:13:14 +02:00
Jouni Malinen
82cc0b0cc2 Allow hostapd AP to advertise Transition Disable KDE
The new hostapd configuration parameter transition_disable can now be
used to configure the AP to advertise that use of a transition mode is
disabled. This allows stations to automatically disable transition mode
by disabling less secure network profile parameters.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 00:12:41 +02:00
Jouni Malinen
3eb9ddc658 Transition Disable KDE definitions
Define the OUI Type and bitmap values for Transition Disable KDE. These
will be shared by both the AP and STA implementations.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-26 00:12:39 +02:00
Wu Gao
a72ec4c221 Add addition CFR capture type to filter all NDPA NDP frames
Add QCA_WLAN_VENDOR_CFR_NDPA_NDP_ALL in enum
qca_wlan_vendor_cfr_capture_type. This capture type requests all NDPA
NDP frames to be filtered.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-25 12:05:14 +02:00
Wu Gao
a163bfe2bc Change CFR attributes from required to optional
Some CFR attributes are used frequently with conditions, so change them
from required to optional.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-25 12:04:37 +02:00
Noam Shaked
e520de8dbe Add ACS support for 60 GHz channel bonding
hostapd will trigger EDMG auto channel selection by setting
QCA_WLAN_VENDOR_ATTR_ACS_EDMG_ENABLED. The 60 GHz driver will be
called to start an auto channel selection and will return the
primary channel and the EDMG channel.

Signed-off-by: Noam Shaked <nshaked@codeaurora.org>
2020-03-24 22:15:32 +02:00
Jouni Malinen
634bc4e6df tests: sigma_dut sta_scan ShortSSID
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-24 12:33:31 +02:00
Noam Shaked
00f6a27628 nl80211: Fix offloaded ACS regression for the 60 GHz band
Addition of chan_2ghz_or_5ghz_to_freq() broke 60 GHz ACS, because it
assumes reported ACS channel is on either 2.4 or 5 GHz band. Fix this
by converting chan_2ghz_or_5ghz_to_freq() to a more generic
chan_to_freq(). The new function uses hw_mode to support 60 GHz.

Fixes: 41cac481a8 ("ACS: Use frequency params in ACS (offload) completed event interface")
Signed-off-by: Noam Shaked <nshaked@codeaurora.org>
2020-03-23 22:29:04 +02:00
John Crispin
1e8ea0833d HE: Add HE support to hostapd_set_freq_params()
The parameters that need to be applied are symmetric to those of VHT,
however the validation code needs to be tweaked to check the HE
capabilities.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2020-03-23 18:08:50 +02:00
Jouni Malinen
8e467e3cf4 wlantest: Check for zero TK even when the real PTK is not known
This makes it easier to analyze certain encryption issues. Also print
out an error at the default INFO debug verbosity with the frame number.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-23 17:58:43 +02:00
Wu Gao
bb08be757f Extend vendor attributes to support enhanced CFR capture
Enhanced channel frequency response supports capturing of channel status
information based on RX. Define previous CFR as version 1 and enhanced
CFR as version 2. If target supports both versions, two versions can't
be enabled at same time. Extend attributes for enhanced CFR capture in
enum qca_wlan_vendor_peer_cfr_capture_attr.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-23 15:39:36 +02:00
Noam Shaked
30ac8ddaf6 Add QCA vendor attributes for ACS over EDMG (IEEE 802.11ay)
QCA_WLAN_VENDOR_ATTR_ACS_EDMG_ENABLED, conduct ACS for EDMG.
QCA_WLAN_VENDOR_ATTR_ACS_EDMG_CHANNEL, return the EDMG channel.

Signed-off-by: Noam Shaked <nshaked@codeaurora.org>
2020-03-23 13:19:51 +02:00
Jouni Malinen
681e8495b4 tests: Extended Key ID
Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-23 11:47:31 +02:00
Jouni Malinen
41c3f0cd5b Allow last configured Key ID for TK to be fetched from wpa_supplicant
"GET last_tk_key_idx" can now be used in testing build to determine
which was the last configured Key ID for the pairwise key.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-23 11:47:31 +02:00
Jouni Malinen
8b63a58166 Use a shared helper function for RSN supplicant capabilities
Avoid practically copy-pasted code for determining local RSN
capabilities.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-23 11:47:31 +02:00
Alexander Wetzel
b17b7a8e53 STA: Support Extended Key ID
Support Extended Key ID in wpa_supplicant according to
IEEE Std 802.11-2016 for infrastructure (AP) associations.

Extended Key ID allows to rekey pairwise keys without the otherwise
unavoidable MPDU losses on a busy link. The standard is fully backward
compatible, allowing STAs to also connect to APs not supporting it.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-03-23 11:47:31 +02:00
Alexander Wetzel
862aac1fcd AP: Support Extended Key ID
Support Extended Key ID in hostapd according to IEEE Std 802.11-2016.

Extended Key ID allows to rekey pairwise keys without the otherwise
unavoidable MPDU losses on a busy link. The standard is fully backward
compatible, allowing an AP to serve STAs with and without Extended Key
ID support in the same BSS.

Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de>
2020-03-23 11:43:10 +02:00
Jouni Malinen
9efac01020 tests: Fix bgscan_learn_beacon_loss with REPORTS_TX_ACK_STATUS
Stopping the AP from beaconing will also stop it from acknowledging
frames and that resulted in bgscan_learn_beacon_loss failing when
mac80211_hwsim is registering REPORTS_TX_ACK_STATUS. Work around this by
moving to using PMF so that the station ignores the unprotected
deauthentiation frames from the AP and also disabling SA Query. This
allows the AP to be stopped and restarted with large enough Beacon
interval to allow the station to detect beacon loss.

This is identical to the earlier design change for
bgscan_simple_beacon_loss (somehow this bgscan_learn_beacon_loss test
case managed to pass at that time).

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 19:52:38 +02:00
Jouni Malinen
b967b5e859 Limit scan frequency list to 100 entries
There is no real use case for the scan to be requested on more than 100
channels individually. To avoid excessively long lists with invalid
configuration, use 100 entry limit for the list before dropping to the
fallback scan-all-channels option.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:51:41 +02:00
Jouni Malinen
9f9a148af6 Convert int_array to use size_t instead of int as the length
This extends this to allow longer lists with LP32 data model to avoid
limit of 16-bit int.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
749add5c64 Limit freq_range_list_parse() result to UINT_MAX entries
This addresses a theoretical integer overflow with configuration
parameters with 16-bit int.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
2f06008564 loop: Use size_t for eloop.count
This is more consistent with the other eloop registrations and avoids a
theoretical integer overflow with 16-bit int should more than 32767
sockets/signals/events be registered.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
7858f493f3 eloop: Use size_t for socket table->count
This is more consistent with the other eloop registrations and avoids a
theoretical integer overflow with 16-bit int should more than 32767
sockets be registered (which is not really going to happen in practice).

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
3f45b8daeb hs20-osu-client: Use size_t for certificate components
This avoids a theoretical integer overflow with 16-bit unsigned int
should a certificate be encoded with more that 65535 friendly names or
icons.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
913220cbb8 eloop: Use size_t for signal_count
This is more consistent with the other eloop registrations and avoids a
theoretical integer overflow with 16-bit int (not that there would ever
be more that 32767 signal handlers getting registered).

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
ae7193611f Limit maximum number of pending SA Queries
There is no point in starting a huge number of pending SA Queries, so
limit the number of pending queries to 1000 to have an explicit limit
for how large sa_query_count can grow.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
02b43c557c RADIUS: Use size_t instead of int for message attributes
While RADIUS messages are limited to 4 kB, use size_t to avoid even a
theoretical overflow issue with 16-bit int.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
a2c23195ad D-Bus: Use size_t for values theoretically larger than 16-bit int
These are theoretical cases with 32-bit integers, but cases that could
potentially hit an integer overflow with 16-bit int.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
d2d16e3100 Use size_t instead of int or unsigned int for configuration items
While int and unsigned int are not going overflow in practice as 32-bit
values, these could at least in theory hit an integer overflow with
16-bit int. Use size_t to avoid such potential issue cases.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
4391ddd639 Use size_t instead of unsigned_int for last_scan_res
This avoids a theoretical unsigned integer overflow case with 32-bit
integers, but something that could potentially be hit with 16-bit int
(though, even that part looks pretty theoretical in this particular case
of number of BSSs in scan results).

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-22 18:50:04 +02:00
Jouni Malinen
7fb365893a tests: Wait longer for connection in radius_macacl_unreachable
It looks ike the authentication timeouts may continue a bit longer after
some kernel changes and that could result in temporarily disabling the
network profile. Give this test case more time to complete the
connection to avoid reporting failures unnecessarily.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-21 23:56:19 +02:00
Jouni Malinen
275509ee67 tests: Update prefer_vht40 throughput estimation
Match the updated max_ht40_rate() estimation with VHT.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-21 19:33:38 +02:00
Matthew Wang
22f0318dbd Interpolate rate calculation functions
Make max_*_rate() functions and rate calculation at the beginning of
wpas_get_est_tpt() more continuous. In wpa_supplicant_need_to_roam(), we
compare these values to make a roaming decision. However, at certain
SNRs, we see unrealistically large jumps in estimated throughput
according to these functions, leading us to make incorrect roaming
decisions. Perform linear interpolation where applicable to more
accurately reflect actual throughput.

Example:
wlan0: Current BSS: 88:3d:24:b4:95:d2 freq=2412 level=-69 snr=20 est_throughput=54000
wlan0: Selected BSS: 88:3d:24:b4:89:9e freq=2417 level=-67 snr=22 est_throughput=63500
wlan0: Using signal poll values for the current BSS: level=-69 snr=20 est_throughput=54000
wlan0: Allow reassociation - selected BSS has better estimated throughput

2 dB increase in RSSI likely isn't responsible for a 17% increase in
throughput.

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2020-03-21 19:00:44 +02:00
Matthew Wang
3a25897ef7 Adjust max bitrate SNR floors
These values were defined in commit a1b790eb9d ("Select AP based on
estimated maximum throughput") with no justification. Other sources
[0,1,2] give a different (consistent) set of SNR floors per MCS index.
Adjust the values accordingly.

[0] http://www.revolutionwifi.net/revolutionwifi/2014/09/wi-fi-snr-to-mcs-data-rate-mapping.html
[1] https://higher-frequency.blogspot.com/2016/10/80211n-80211ac-data-rates-and-snr.html
[2] https://www.wlanpros.com/resources/mcs-index-802-11ac-vht-chart/

Signed-off-by: Matthew Wang <matthewmwang@chromium.org>
2020-03-21 18:17:44 +02:00
Jouni Malinen
a60a0a43c7 tests: Fix bgscan_simple_beacon_loss with REPORTS_TX_ACK_STATUS
Stopping the AP from beaconing will also stop it from acknowledging
frames and that resulted in bgscan_simple_beacon_loss failing when
mac80211_hwsim is registering REPORTS_TX_ACK_STATUS. Work around this by
moving to using PMF so that the station ignores the unprotected
deauthentiation frames from the AP and also disabling SA Query. This
allows the AP to be stopped and restarted with large enough Beacon
interval to allow the station to detect beacon loss.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-21 18:13:28 +02:00
Jouni Malinen
eb26a6997d Allow SA Query to be disabled for testing purposes
The new wpa_supplicant control interface SET parameter disable_sa_query
can now be used to disable SA Query on receiving unprotected
disconnection event.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-21 18:12:02 +02:00
Ouden
7546c489a9 nl80211: Fix RTM NEW/DELLINK IFLA_IFNAME copy for maximum ifname length
If the kernel rtm_newlink or rtm_dellink send the maximum length of
ifname (IFNAMSIZ), the event handlers in
wpa_driver_nl80211_event_rtm_addlink() and
wpa_driver_nl80211_event_rtm_dellink() did not copy the IFLA_IFNAME
value. Because the RTA_PAYLOAD (IFLA_IFNAME) length already includes the
NULL termination, that equals the IFNAMSIZ.

Fix the condition when IFNAME reach maximum size.

Signed-off-by: Ouden <Ouden.Biz@gmail.com>
2020-03-21 17:12:29 +02:00
Sourav Mohapatra
22547c3148 More details to the vendor specific driver internal failure reporting
Add more hang reason codes for the hang reason in the
QCA_NL80211_VENDOR_SUBCMD_HANG events. This also introduces the
attribute QCA_WLAN_VENDOR_ATTR_HANG_REASON_DATA to carry the required
data for the respective hang reason. This data is expected to contain
the required dump to analyze the reason for the hang.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2020-03-21 17:12:29 +02:00
Jouni Malinen
51e8f5d63c Ignore duplicated SSID element when parsing
Some APs have managed to add two SSID elements into Beacon frames and
that used to result in picking the last one which had incorrect data in
the known examples of this misbehavior. Pick the first one to get the
correct SSID.

Signed-off-by: Jouni Malinen <j@w1.fi>
2020-03-21 17:12:29 +02:00