Commit graph

7439 commits

Author SHA1 Message Date
Jouni Malinen
9b3e2ad3a7 tests: Fix reporting of skipped cipher suite tests
The return value was lost and GCMP, CCMP-256, and GCMP-256 test cases
were reporting PASS instead of SKIP.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-11 15:03:38 +02:00
Jouni Malinen
3b9c5176d1 Fix PTK derivation for CCMP-256 and GCMP-256
Incorrect PTK length was used in PMK-to-PTK derivation and the Michael
MIC TX/RX key swapping code was incorrectly executed for these ciphers
on supplicant side.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-11 15:00:09 +02:00
Jouni Malinen
e6ef73f188 nl80211: Add debug print of KEY_DATA and KEY_SEQ
While these were already available from elsewhere in the debug log, it
is convenient to have the values also available at the location where
the actual nl80211 command is issued.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-11 14:59:15 +02:00
Jouni Malinen
8fc1f204df tests: HS 2.0 session information URL
Verify that session information is stored from Access-Accept and sent to
the station at the requested timeout. Verify that station processes this
notification.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-10 11:34:31 +02:00
Jouni Malinen
4056b0c747 tests: RADIUS Class attribute
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-10 11:16:29 +02:00
Jouni Malinen
18b92c6cfe tests: RADIUS attributes in Access-Request and Accounting-Request
This verifies that hostapd can add extra RADIUS attributes using
radius_auth_req_attr and radius_acct_req_attr.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-10 11:05:48 +02:00
Jouni Malinen
fe23f3816e tests: hostapd as P2P Device manager
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-10 10:58:01 +02:00
Jouni Malinen
f6e1eb07ee tests: Set country code and use 5 GHz band
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-10 10:49:49 +02:00
Jouni Malinen
52ec1aebe5 tests: hostapd adding vendor elements to Beacon/Probe Response frames
This verifies that the configuration parameter vendor_elements works
correctly.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-10 10:42:41 +02:00
Jouni Malinen
5c3b96eea6 tests: hostapd control interface - STATUS commands
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-10 10:39:23 +02:00
Jouni Malinen
b465f5d3a1 Remove unused hostapd_wep_key_cmp()
The only user was removed five years ago in commit
fb6d357532.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-10 10:27:58 +02:00
Jouni Malinen
76a30196ad tests: PMKSA cache and Chargeable-User-Identity
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-10 00:51:14 +02:00
Jouni Malinen
4fb363c62b Fix error path handling on radius_accept_attr
This error path must not try to free the user entry since that entry was
already added to the BSS list and will be freed when BSS is freed.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-10 00:44:26 +02:00
Jouni Malinen
8b56743ef7 tests: Displayable message in EAP Request-Identity
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-10 00:27:15 +02:00
Jouni Malinen
7c50093f37 tests: Authenticator-initiated EAP reauthentication
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-10 00:18:49 +02:00
Jouni Malinen
390b92913a TLS testing: Allow hostapd to be used as a TLS testing tool
The internal TLS server implementation and RADIUS server implementation
in hostapd can be configured to allow EAP clients to be tested to
perform TLS validation steps correctly. This functionality is not
included in the default build; CONFIG_TESTING_OPTIONS=y in
hostapd/.config can be used to enable this.

When enabled, the RADIUS server will configure special TLS test modes
based on the received User-Name attribute value in this format:
<user>@test-tls-<id>.<rest-of-realm>. For example,
anonymous@test-tls-1.example.com. When this special format is used, TLS
test modes are enabled. For other cases, the RADIUS server works
normally.

The following TLS test cases are enabled in this commit:
1 - break verify_data in the server Finished message
2 - break signed_params hash in ServerKeyExchange
3 - break Signature in ServerKeyExchange

Correctly behaving TLS client must abort connection if any of these
failures is detected and as such, shall not transmit continue the
session.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 18:47:09 +02:00
Jouni Malinen
994afe3390 RADIUS server: Allow TLS implementation add log entries
This allows the internal TLS implementation to write log entries to the
same authlog with rest of the RADIUS server and EAP server
functionality.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 18:21:13 +02:00
Jouni Malinen
01f7fe10ef RADIUS server: Allow EAP methods to log into SQLite DB
This extends RADIUS server logging capabilities to allow EAP server
methods to add log entries.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-09 18:21:13 +02:00
Jouni Malinen
8a57da7e28 RADIUS server: Add option for storing log information to SQLite DB
If eap_user_file is configured to point to an SQLite database, RADIUS
server code can use that database for log information.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-09 18:21:13 +02:00
Jouni Malinen
f3ef7a2640 TLS client: Send decrypt_error on verify_data validation error
Previously, this was silently dropped which left the connection waiting
for timeout. decrypt_error alert can be used here to avoid that.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 18:21:13 +02:00
Jouni Malinen
129b9b991a TLS: Share a helper function for verifying Signature
This same design is used in both the server and the client roles in the
internal TLS implementation. Instead of duplicated implementation, use a
helper function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 17:11:58 +02:00
Jouni Malinen
6531963584 TLS: Use a helper function for calculating ServerKeyExchange hash
Instead of separate server and client side implementations, use a common
set of helper functions for calculating the ServerParams hash for
ServerKeyExchange.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 16:26:27 +02:00
Jouni Malinen
65074a2a7c TLS: Add support for DHE-RSA cipher suites
This extends the internal TLS implementation to support DHE-RSA
cipher suites in both server and client roles.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 15:43:50 +02:00
Jouni Malinen
41ebfe97ec TLS server: Enable SHA256-based cipher suites
The SHA256-based RSA-AES-128/256 cipher suites were already implemented
and enabled for the internal TLS client, but they had not been enabled
for the server.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 11:57:05 +02:00
Jouni Malinen
daf3806d1d tests: Protocol tests for unexpected/invalid GO Neg Resp
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 01:18:42 +02:00
Jouni Malinen
9e423774d3 tests: Fix a typo in check_p2p_response error path
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 01:18:42 +02:00
Jouni Malinen
e2a9fa34bb tests: Simultaneous GO Neg initiation
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 01:18:42 +02:00
Jouni Malinen
9a19cc0807 tests: RADIUS interim accounting update
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-09 01:18:42 +02:00
Jouni Malinen
403548350a tests: Non-compliant reject-by-user indication in GO Neg Req
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-08 23:00:10 +02:00
Jouni Malinen
60b893dfb3 wpa_supplicant: Allow external management frame processing for testing
This enables more convenient protocol testing of AP and P2P
functionality in various error cases and unexpected sequences without
having to implement each test scenario within wpa_supplicant.
ext_mgmt_frame_handle parameter can be set to 1 to move all management
frame processing into an external program through control interface
events (MGMT-RX and MGMT-TX-STATUS) and command (MGMT_TX). This is
similar to the test interface that was added to hostapd previously, but
allows more control on offchannel operations and more direct integration
with the internal P2P module.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-08 20:21:21 +02:00
Jouni Malinen
5cf8801181 tests: HS 2.0 subscription remediation notification
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-08 11:49:23 +02:00
Jouni Malinen
fac1722787 tests: VLAN tests using RADIUS tunnel attributes
Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-08 11:35:08 +02:00
Jouni Malinen
37fa2eb5ea tests: Add test cases for AP VLAN
These verify dynamic AP VLAN interface addition with open and WPA2-PSK
network.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-08 11:35:08 +02:00
Jouni Malinen
ec33bc67f8 Enable RADIUS message dumps with excessive debug verbosity
Previously, this was enabled only at msgdump verbosity level, but any
level that is more verbose than it should also be included.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-08 11:35:08 +02:00
Jouni Malinen
226e3579f9 Revert "bridge: Track inter-BSS usage"
This reverts commit 4345fe963e. That
introduced number of memory leaks and since the rest of the VLAN changes
did not yet go in, it is easier to revert this for now and bring back
the changes after fixes if there is sufficient interest for them in the
future.

Signed-off-by: Jouni Malinen <j@w1.fi>
2014-03-08 11:35:08 +02:00
Jouni Malinen
48ef12e75f tests: Verify HS 2.0 deauth request from RADIUS Access-Accept
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-08 11:35:08 +02:00
Jouni Malinen
d0ee16edc8 Allow arbitrary RADIUS attributes to be added into Access-Accept
This extends the design already available for Access-Request packets to
the RADIUS server and Access-Accept messages. Each user entry can be
configured to add arbitrary RADIUS attributes.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-08 11:35:08 +02:00
Jouni Malinen
0ac3876627 Fix PMF protect disconnection on session timeout
Request the driver to send a Deauthentication frame before doing
any other disconnection steps on the session timeout path. This is
needed when PMF is negotiated for the association since the driver
will need to find the STA entry and the PTK for it to be able to
protect the robust Deauthentication frame.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-07 23:24:54 +02:00
Jouni Malinen
49021c1cb6 Fix hostapd error path regression
Commit 354c903f8e added setting of
driver_ap_teardown on the hostapd exit path without taking into account
that this may also be called on an error path where the interface has
not been initialized. Fix the resulting NULL pointer dereference to
allow hostapd to exit cleanly in error case.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-07 22:37:03 +02:00
Ilan Peer
c16a7590cf wpa_supplicant: Add a configuration file for the P2P_DEVICE parameters
Add an option to specify a configuration file that can be used to hold
the P2P_DEVICE configuration parameters. If this option is not used, the
P2P_DEVICE configuration parameters will be read from interface
configuration file.

Note that it is advised to use this option in some cases such as:

If a P2P_DEVICE is supported by the driver, the wpa_supplicant creates a
dedicated P2P Device interface, where the configuration file used for
the main interface is used. As a consequence, if the configuration file
includes network definition etc., the wpa_supplicant will try to perform
station specific flows on the P2P Device interface which will fail.

If a P2P_DEVICE is supported by the driver and update_config is used,
the P2P Device configuration data will override the main interface
configuration data.

Signed-hostap: Ilan Peer <ilan.peer@intel.com>
2014-03-07 00:11:04 +02:00
Pawel Kulakowski
185677b74c Disable interface if ACS fails
In case of Automatic Channel Selection (ACS) failure, we do not have a
real fallback path. Interface still remains in ACS state. To reflect we
did not succeed with ACS, simply disable the interface and indicate this
to user/upper layer entity so that a suitable recovery or error
notification can be performed.

Signed-off-by: Pawel Kulakowski <pawel.kulakowski@tieto.com>
2014-03-06 23:12:33 +02:00
Jouni Malinen
13adbe23e9 tests: Verify open mode IBSS and beacon_int configuration
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-06 23:10:48 +02:00
Jouni Malinen
8f05577d11 Configure beacon interval for IBSS command
wpa_supplicant already allowed beacon interval to be configured for AP
mode operations, but this was not passed to the driver for IBSS even
though the same parameter can used for that case. Add this for the
nl80211 driver interface to allow beacon interval to be controlled for
IBSS as well.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-06 23:09:20 +02:00
Jouni Malinen
5a92bda635 tests: Verify open mode AP functionality
Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-06 22:59:38 +02:00
Jouni Malinen
95faa36ad9 HS 2.0R2: Check for OSEN when determining whether to authorize STA
handle_assoc_cb() got this addition, but the check in
hostapd_new_assoc_sta() was not modified to be aware of the OSEN special
case for EAPOL state machines to be used for marking a STA authorized.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-06 22:48:37 +02:00
Sunil Dutt Undekari
113318ad57 Set the station to authorized on assoc event for open authentication
This was done in handle_assoc_cb() in ieee802_11.c for drivers that use
hostapd SME/MLME. However, drivers that include SME/MLME implementation
do not use that function and the STA flag needs to be set when
processing the association notification. This is needed to get the STA
entry into showing the proper authorized state and to get the
AP-STA-CONNECTED/DISCONNECTED events on the control interface.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
2014-03-06 22:45:15 +02:00
Bartosz Markowski
905828fea4 hostapd: Fix vht_capab 'Maximum A-MPDU Length Exponent' handling
As per IEEE Std 802.11ac-2013, 'Maximum A-MPDU Length Exponent' field
value is in the range of 0 to 7. Previous implementation assumed EXP0 to
be the maximum length (bits 23, 24 and 25 set) what is incorrect.

This patch adds options to set it up within the 0 to 7 range.

Signed-off-by: Bartosz Markowski <bartosz.markowski@tieto.com>
2014-03-06 00:09:37 +02:00
Eduardo Abinader
3bdc651a62 tests: Fix current log dir symbolic link
Fix updating of the current symbolic link when LOGDIR is already set.
The current symbolic link was only set, if LOGDIR has not been
previously defined. If the user had chosen to cancel the running test
iteration and run it again by running start.sh again, the current
symbolic link was not updated.

Signed-off-by: Eduardo Abinader <eduardo.abinader@openbossa.org>
2014-03-06 00:04:34 +02:00
Michal Kazior
89de64c5c0 ACS: Fix VHT80 segment picking
For example, the previous implementation considered [44, 48, 52, 56] to
be a valid VHT80 channel -- which it is not. This resulted in, e.g.,
failure to start CAC when channels on overlapped segments included DFS
channels.

Add a check similar to the HT40 one to prevent that. The check is
performed this way as the ACS implementation assumes the primary channel
to be the first channel in a given segment.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
2014-03-06 00:01:29 +02:00
Janusz Dziedzic
1f37483416 DFS: Print error in case CAC fails
Previously, we printed this message as a debug one, which was confusing
in case verbose debug messages were disabled. User could think CAC
started but never ended. Add more parameterss to DFS_EVENT_CAC_START, so
external programs can more easily check what was wrong in case of
errors.

Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com>
2014-03-05 23:59:04 +02:00