Commit graph

14781 commits

Author SHA1 Message Date
Jouni Malinen
831d8c9cf5 FILS: Add RSNE into (Re)Association Response frame
This AP behavior was missing from IEEE Std 802.11ai-2016, but it is
needed for the RSNE validation to work correctly and for a FILS STA to
be able to perform the mandatory check for RSNE matching when processing
the (Re)Association Response frame (as described in 802.11ai). REVmd
will be updating the standard to cover this AP case, so prepare the
implementation to match that. Without this, a FILS STA might reject
association whenever using FILS authentication.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-23 00:34:43 +03:00
Jouni Malinen
a96c783645 dbus: Fix some memory leaks on error paths
wpa_dbus_dict_close_write() was not called if
fill_dict_with_properties() fails and that could result in leaking
memory. Fix this in two cases. There might be other missing calls to
jouni@codeaurora.org() on error paths, but those will need to be handled
separately with more complex changes.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 22:06:46 +03:00
Jouni Malinen
e3b39e62c2 OpenSSL: Fix a memory leak in OCSP handling
If OCSP_resp_find_status() fails with the first OCSP_CERTID, the
generation of the second OCSP_CERTID ended up leaking memory. Fix this
by freeing the previously allocated OCSP_CERTID on that code path.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 21:08:53 +03:00
Jouni Malinen
6602d9e3a6 DPP: Fix a memory leak in testing sequence
Do not allow auth->own_protocol_key to be overridden without having
freed the previously stored key in case a test sequence in
dpp_proto_auth_conf_replaced_by_resp is used.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 20:38:10 +03:00
Jouni Malinen
c5622b43cd DPP: Fix a memory leak on duplicate Authentication Response
Do not allow auth->peer_protocol_key to be overridden without having
freed the previously stored key in case two Authentication Response
messages are received.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 20:25:10 +03:00
Jouni Malinen
1cdfe8d23f DPP: Fix a memory leak in PKEX Qi/Qr derivation
The result of EC_GROUP_dup() needs to be freed, so do so within the
derivation functions for all error cases and in the callers for success
cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 19:59:21 +03:00
Jouni Malinen
51dc146f3e EAP-PAX server: Avoid debug prints of uninitialized memory in error cases
Use a separate error case handler for eap_pax_mac() failures and memcmp
to avoid wpa_hexdump() calls for the (mainly theoretical) local error
cases in deriving the MAC.

Fixes: b3c2b5d9f7 ("EAP-PAX server: Check hash function results")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 19:02:19 +03:00
Jouni Malinen
677e120181 dragonfly: Fix a memory leak on error path
This is mostly a theoretical case, but since crypto_bignum_rand() could
fail, need to free the allocated struct crypto_bignum *tmp in such a
case.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 18:55:57 +03:00
Jouni Malinen
8925d2010d OpenSSL: Fix memory leak in crypto_dh_derive_secret()
BN_clear() does not free the BIGNUM; it only clears its value. Fix this
memory leak by using the appropriate BN_clear_free() function instead.

Fixes: b11fa98bcb ("Add explicit checks for peer's DH public key")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 18:53:32 +03:00
Jouni Malinen
57ec74ea9b DPP: Fix memory leak in EC_GROUP handling
EC_GROUP_new_by_curve_name() allocates memory for the returned pointer,
so need to free this with EC_GROUP_free() before leaving the calling
functions. This was leaking memory when parsing JWK and when performing
PKEX.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 18:32:29 +03:00
Jouni Malinen
7a9ddba6f5 DPP: Fix a memory leak in key pair generation
ec_params needs to be free within dpp_gen_keypair() to avoid leaking the
allocated memory.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 18:27:06 +03:00
Jouni Malinen
7153540c39 tests: Enable full memory leak reporting in valgrind
This has heavier CPU and memory requirements, but is needed to report
memory leaks in libraries.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 13:07:50 +03:00
Jouni Malinen
f9cd1327ad OpenSSL: Fix memory leak in crypto_ecdh_init()
ec_params needs to be freed before returning from the function.
Extension of this function to support BoringSSL introduced this memory
leak and that was later extended to be the only variant and apply to
OpenSSL and LibreSSL cases as well in commit c23e87d0d1 ("OpenSSL:
Replace EVP_PKEY_paramgen() with EC_KEY_new_by_curve_name()").

Fixes: f29761297b ("BoringSSL: Implement crypto_ecdh_init()")
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-08 12:16:03 +03:00
Paul Zhang
fb10f3bb65 Add subcmd QCA_NL80211_VENDOR_SUBCMD_INTEROP_ISSUES_AP
In practice, some APs have interop issues with the DUT. This sub command
is used to transfer the AP info between the driver and user space. This
works both as a command and event. As a command, it configures the
stored list of APs from user space to firmware; as an event, it
indicates the AP info detected by the firmware to user space for
persistent storage. The attributes defined in enum
qca_vendor_attr_interop_issues_ap are used to deliver the parameters.

Signed-off-by: Paul Zhang <paulz@codeaurora.org>
2019-05-07 13:03:51 +03:00
Jouni Malinen
a85d4ed1c0 tests: FILS SK using ERP and SHA256/SHA384 change in roam
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-06 23:43:33 +03:00
Jouni Malinen
e374def207 tests: Start ERP authentication server without AP
There is no actual need for running the authentication server with
driver=nl80211, so simplify this by using driver=none instead. This
frees up apdev[1] for actual AP needs in the test cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-06 23:36:30 +03:00
Jouni Malinen
8528ad0c60 tests: Enable virtual time in UML
This speeds up test execution significantly by removing unnecessary
waiting for things to happen since the kernel log is allowed to jump
forward whenever there is nothing to do.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-06 20:29:16 +03:00
John Crispin
ad5224dd43 HE: Fix typo srp -> spr in hostapd configuration parameters
The initial commit used srp instead of spr for the spatial reuse
configuration prefix.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-05 00:59:18 +03:00
John Crispin
b505ef7e96 HE: Do not add SPR IE if sr_control is set to 0
If none of the sr_control bits are set, we do not neet to add the IE to
the Beacon frame.

Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
2019-05-05 00:58:25 +03:00
Jouni Malinen
4abaf4df84 tests: Make ap_csa_disable more robust
This test case was failing frequently due to the station not being able
to connect back to the AP if the interrupted channel switch ended up
moving the AP to the new channel anyway on restart. Scan both possible
channels to allow the AP to be found in either case.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-05-05 00:57:37 +03:00
Jouni Malinen
b756cd4959 tests: Add forgotten CONFIG_IEEE80211AX=y to the defaults
This was supposed to be added when test_he.py was added.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-05-05 00:57:37 +03:00
Jouni Malinen
de94be0acd Enforce that IEEE 802.1X EAPOL-Key Replay Counter increases
While this should not happen in practical use cases,
wpa_get_ntp_timestamp() could return the same value when called twice in
a row quickly. Work around that case by enforcing a new Replay Counter
value based on stored last value.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-05-05 00:57:37 +03:00
Jouni Malinen
1cefd89b37 tests: Support UML kernel as a replacement for KVM
This allows UML builds to be used in running user mode without having to
run the full x86 kernel in virtual machine.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-05-05 00:44:04 +03:00
Jouni Malinen
6980542556 tests: sigma_dut and TLS server certificate constraints
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-03 13:06:44 +03:00
Jeff Johnson
fd1c2ca521 Add QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX
Update enum qca_wlan_vendor_attr_get_wifi_info to add support for
attribute QCA_WLAN_VENDOR_ATTR_WIFI_INFO_RADIO_INDEX. In addition
update the documentation for qca_wlan_vendor_attr_get_wifi_info and
QCA_NL80211_VENDOR_SUBCMD_GET_WIFI_INFO to fully describe the
operation of the command and the format of the attributes.

Signed-off-by: Jeff Johnson <jjohnson@codeaurora.org>
2019-05-02 17:13:46 +03:00
Vamsi Krishna
ae21cffb2c Add QCA vendor command to support beacon reporting feature
Add a QCA vendor sub command QCA_NL80211_VENDOR_SUBCMD_BEACON_REPORTING
to implement beacon reporting feature. Different operations required to
implement this feature can be specified in
QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_OP_TYPE.

Userspace requests the driver/firmware to periodically report received
Beacon frames whose BSSID matches the current connected BSS's MAC
address. If userspace requests the driver/firmware to send beacon
reports actively, the driver encapsulates the details of the beacon in
an event and sends it to userspace asynchronously. Otherwise, the driver
will only update the beacon in cfg80211 scan cache but will not send any
event to userspace.

If this command is not issued, the current behavior of the
driver/firmware is to update the cfg80211 scan cache only when there is
a scan issued by the host in progress or whenever there is a change in
IEs of the Beacon frames from the current connected BSS.

The userspace requests the driver/firmware to stop reporting beacons
when reporting is not required anymore. If the driver/firmware is not
able to receive Beacon frames because of other Wi-Fi operations such as
off-channel activities, etc., the driver/firmware sends a pause event to
userspace and stops reporting Beacon frames. The driver/firmware
indicates whether the beacon reporting automatically resumes later by
using the QCA_WLAN_VENDOR_ATTR_BEACON_REPORTING_AUTO_RESUMES flag. If
userspace doesn't want the beacon reporting to be resumed automatically,
userspace can send QCA_WLAN_VENDOR_BEACON_REPORTING_OP_STOP command to
the driver to stop beacon reporting.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-05-02 15:08:31 +03:00
Toke Høiland-Jørgensen
ef7217518b hostapd: Add airtime policy configuration support
This adds support to hostapd for configuring airtime policy settings for
stations as they connect to the access point. This is the userspace
component of the airtime policy enforcement system PoliFi described in
this paper: https://arxiv.org/abs/1902.03439

The Linux kernel part has been merged into mac80211 for the 5.1 dev
cycle.

The configuration mechanism has three modes: Static, dynamic and limit.
In static mode, weights can be set in the configuration file for
individual MAC addresses, which will be applied when the configured
stations connect.

In dynamic mode, weights are instead set per BSS, which will be scaled
by the number of active stations on that BSS, achieving the desired
aggregate weighing between the configured BSSes. Limit mode works like
dynamic mode, except that any BSS *not* marked as 'limited' is allowed
to exceed its configured share if a per-station fairness share would
assign more airtime to that BSS. See the paper for details on these
modes.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2019-05-02 14:57:43 +03:00
Toke Høiland-Jørgensen
6720b9482f nl80211: Station airtime weight configuration
This provides a mechanism for configuring per-STA airtime weight for
airtime policy configuration.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2019-05-02 13:28:17 +03:00
Toke Høiland-Jørgensen
58d4c23615 nl80211: Fetch STA TX/RX duration statistics
This makes per-STA TX/RX duration statistics available for airtime policy
configuration.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2019-04-30 12:34:58 +03:00
Toke Høiland-Jørgensen
1d6f63854e nl80211: Fetch STA TXQ backlog statistics
This makes per-STA TXQ backlog statistics available for airtime policy
configuration.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
2019-04-30 12:34:58 +03:00
David Woodhouse
6326fa0c40 Fix ENGINE support with OpenSSL 1.1+
Commit 373c796948 ("OpenSSL: Fix compile with OpenSSL 1.1.0 and
deprecated APIs") removed a call to ENGINE_load_dynamic() for newer
versions of OpenSSL, asserting that it should happen automatically.

That appears not to be the case, and loading engines now fails because
the dynamic engine isn't present.

Fix it by calling ENGINE_load_builtin_engines(), which works for all
versions of OpenSSL. Also remove the call to ERR_load_ENGINE_strings()
because that should have happened when SSL_load_error_strings() is
called anyway.

Fixes: 373c796948 ("OpenSSL: Fix compile with OpenSSL 1.1.0 and deprecated APIs")
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2019-04-30 12:10:40 +03:00
Jouni Malinen
099224c18e nl80211: Simplify if_indices tracking
Maintain a single array (of struct with two int variables) instead of
two independent arrays (of int) for tracking know ifindexes and reasons
for having added them. The previous implementation tried to maintain two
independent arrays even though they were always required to be of
exactly same length and order. That had resulted in a bug earlier and
the code was not exactly easy to understand either, so replace this with
a single array.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-28 21:05:54 +03:00
Jouni Malinen
e6ca2f1139 nl80211: Fix handling of if_indices reallocation failure
Addition of a separate if_indices_reason array broke reallocation
failure checking. drv->if_indices or drv->if_indices_reason could not be
NULL in the place where this check was moved to. Fix that by maintaining
knowledge of reallocation failure in a separate local variable.

Fixes: 732b1d20ec ("nl80211: Clean up ifidx properly if interface in a bridge is removed")
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-28 20:52:10 +03:00
Jouni Malinen
b93a0ce7bd DPP2: Check conn->ctrl more consistently
There is no point in checking this pointer against NULL after it has
been dereferenced. Move the check to the beginning of the function.

Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-28 20:28:46 +03:00
Jouni Malinen
d42df8d6ce Fix a regression in storing of external_auth SSID/BSSID
An earlier change in drivers_ops API for struct external_auth broke the
way SSID and BSSID for an external authentication request were stored.
The implementation depended on the memory array being available in the
API struct with a use of memcpy() to copy the full structure even though
when only SSID and BSSID was needed. Fix this by replacing that
easy-to-break storing mechanism with explicit arrays for the exact set
of needed information.

Fixes: dd1a8cef4c ("Remove unnecessary copying of SSID and BSSID for external_auth")
Signed-off-by: Jouni Malinen <j@w1.fi>
2019-04-28 16:24:32 +03:00
Jouni Malinen
9ff2b85e73 tests: FT-EAP and PMKSA caching for initial mobility domain association
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-28 16:07:22 +03:00
Jouni Malinen
9083ef1355 FT: Allow PMKSA caching to be enabled with FT-EAP
The new wpa_supplicant network profile configuration parameter
ft_eap_pmksa_caching=1 can be used to enable use of PMKSA caching with
FT-EAP for FT initial mobility domain association. This is still
disabled by default (i.e., maintaining previous behavior) to avoid
likely interoperability issues.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-28 16:01:45 +03:00
Jouni Malinen
a7b7ce82f4 FT: Allow cached XXKey/MPMK to be used if new XXKey is not available
This allows authenticator side to complete FT initial mobility domain
association using FT-EAP with PMKSA caching.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-28 15:52:43 +03:00
Jouni Malinen
64f4809371 FT: Store XXKey/MPMK in PMKSA cache instead of MSK (authenticator)
When completing FT initial mobility domain association with EAP, store
XXKey/MPMK in the PMKSA cache instead of MSK. The previously stored MSK
was of no use since it could not be used as the XXKey for another FT
initial mobility domain association using PMKSA caching.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-28 15:52:08 +03:00
Jouni Malinen
0c46b1a516 FT: Allow cached XXKey/MPMK to be used if new XXKey is not available
This allows supplicant side to complete FT initial mobility domain
association using FT-EAP with PMKSA caching.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-28 15:50:51 +03:00
Jouni Malinen
16c511449d FT: Store XXKey/MPMK in PMKSA cache instead of MSK (supplicant)
When completing FT initial mobility domain association with EAP, store
XXKey/MPMK in the PMKSA cache instead of MSK. The previously stored MSK
was of no use since it could not be used as the XXKey for another FT
initial mobility domain association using PMKSA caching.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-28 15:48:58 +03:00
Jouni Malinen
e0e15fc236 Remove unused crypto_bignum_bits()
This wrapper function is not needed anymore.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-26 17:43:45 +03:00
Jouni Malinen
fbd671acb5 tests: Update SAE local error tests to match implementation
The change to use a shared dragonfly_generate_scalar() helper function
resulted in failures in sae_no_random and sae_bignum_failure test cases
due to renamed functions and removed uses.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-26 17:36:27 +03:00
Jouni Malinen
73338db029 Share common SAE and EAP-pwd functionality: own scalar generation
Use a shared helper function for deriving rand, mask, and own scalar.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-26 17:33:44 +03:00
Jouni Malinen
c3805fb623 Ignore channel switch event if AP interface is not yet ready
It is apparently possible to somehow trigger the driver to report a
channel switch event during ACS operation when the interface information
is not yet complete. hapd->iface->current_mode could be NULL in that
case and that would result in process termination due to NULL pointer
dereference.

It should not really be possible to trigger a channel switch during ACS
is running (i.e., before the AP mode operation has been started), but
since that has been seen in an arbitrary test sequence with interface
start/stop operations with various parameters (both valid and invalid),
better prevent a crash here by ignoring the unexpected event instead of
trying to process it.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-26 16:24:31 +03:00
Jouni Malinen
eb314e8af2 Verify that channel info is available in hostapd_hw_get_channel()
Unexpected CHAN_SWITCH command could get this function using a NULL
pointer if the channel switch was requested while the interface was
already disabled.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-26 16:17:59 +03:00
Jouni Malinen
b9058266f0 Clear cached extended_capa pointers on hapd_deinit() call
driver->hapd_deinit() is going to free the memory that the cached
pointers are pointing to, so clear the pointers to avoid possibility of
dereferencing used memory. It seemed to be possible to hit a code path
using those fields by issuing a CHAN_SWITCH command on disabled hostapd
interface in some cases.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-26 16:15:15 +03:00
Jouni Malinen
c48f44e17c tests: ieee80211ax=1 in hostapd STATUS
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-26 15:08:10 +03:00
Hu Wang
6afde52a78 Indicate ieee80211ax configuration in hostapd STATUS output
This adds a ieee80211ax=0/1 line to the STATUS output to indicate
the configuration of ieee80211ax, which similar to ieee80211n and
ieee80211ac.

Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-26 15:06:30 +03:00
Jouni Malinen
71da22b94b tests: Initial and still very minimal HE testing
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
2019-04-26 00:18:52 +03:00